{"title":"Alignment Components","description":"\u003cp\u003e\u003cstrong\u003eShop alignment components, camber kits, caster kits, and adjustable control arms at Black Ops Auto Works.\u003c\/strong\u003e Find vehicle-specific parts for correcting suspension alignment or preparing a performance setup, including toe links, adjustment cams, camber plates, and replacement mounts. Choose components based on your vehicle, suspension configuration, and measured alignment needs.\u003c\/p\u003e\n\u003ch4\u003eCamber, Caster, and Toe Correction\u003c\/h4\u003e\n\u003cp\u003eCamber describes the inward or outward tilt of a wheel when viewed from the front. Caster describes the steering axis angle when viewed from the side. Toe describes whether the wheels point inward or outward when viewed from above. Each measurement has a different role, so the right correction part depends on which angle needs adjustment.\u003c\/p\u003e\n\u003cp\u003eThis collection includes options from Black Ops Auto Works, AAD Performance, SPC Performance, Eibach, SuperPro, Whiteline, and other suspension brands. Adjustment capability varies by product. A camber kit does not automatically provide caster or toe adjustment.\u003c\/p\u003e\n\u003ch4\u003eAdjustable Control Arms and Toe Links\u003c\/h4\u003e\n\u003cp\u003eApplication-specific \u003ca href=\"\/collections\/control-arms\"\u003econtrol arms\u003c\/a\u003e can provide adjustment beyond the factory hardware on supported vehicles. Depending on the design, adjustment may use threaded sections, eccentric hardware, repositionable joints, or interchangeable tabs.\u003c\/p\u003e\n\u003cp\u003eRear toe links address a different alignment measurement from camber arms. Select the correct component for the axle and mounting position, then verify compatibility with existing suspension modifications. Not every replacement control arm is adjustable, and fixed-offset designs should not be confused with independently adjustable arms.\u003c\/p\u003e\n\u003ch4\u003eCamber Kits, Caster Kits, and Adjustment Hardware\u003c\/h4\u003e\n\u003cp\u003eAlignment cams, correction bolts, brackets, and bushings offer application-specific ways to change suspension geometry. These components can be an alternative to replacing a complete arm when their adjustment range is sufficient for the required correction.\u003c\/p\u003e\n\u003cp\u003eStart with an alignment inspection rather than choosing hardware by appearance or vehicle model alone. Compare the measured readings with the target specifications, then confirm that the selected part addresses the correct angle and mounting location.\u003c\/p\u003e\n\u003ch4\u003eCamber Plates and Shock Mounts\u003c\/h4\u003e\n\u003cp\u003eCamber plates provide adjustment at the upper strut mounting point on compatible applications. Replacement shock and strut mounts may serve only as mounting or isolation components, so do not assume every mount in this collection changes alignment.\u003c\/p\u003e\n\u003cp\u003eCheck compatibility with your factory struts or aftermarket suspension, including the spring configuration and mounting hardware. Review the product's adjustment features and installation requirements before combining parts from different systems.\u003c\/p\u003e\n\u003ch4\u003eAlignment Parts for Lowered and Lifted Vehicles\u003c\/h4\u003e\n\u003cp\u003eChanging ride height can change suspension alignment. If you are installing \u003ca href=\"\/collections\/lowering-springs\"\u003elowering springs\u003c\/a\u003e or working with a lifted setup, have the alignment measured at the intended operating ride height. Correction parts may be needed when the factory adjustment range cannot reach the appropriate specifications.\u003c\/p\u003e\n\u003cp\u003eThe amount of correction required depends on the vehicle and its modifications. Do not assume that every lowered car needs the same camber kit or that every lifted truck requires the same upper control arms.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order Alignment Components\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the exact year, make, model, chassis, and drivetrain.\u003c\/li\u003e\n\u003cli\u003eIdentify whether the correction is needed at the front or rear.\u003c\/li\u003e\n\u003cli\u003eUse alignment measurements to determine which angle needs adjustment.\u003c\/li\u003e\n\u003cli\u003eCheck the advertised adjustment range and hardware requirements.\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with ride height, wheels, brakes, and existing suspension parts.\u003c\/li\u003e\n\u003cli\u003eConfirm whether the listing includes one component, a pair, or a complete kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003ch5\u003eDo I need a camber kit after lowering my vehicle?\u003c\/h5\u003e\n\u003cp\u003eNot necessarily. Have the alignment measured after the ride-height change. A correction kit may be needed if the factory hardware cannot achieve the appropriate settings.\u003c\/p\u003e\n\u003ch5\u003eAre camber arms and toe links interchangeable?\u003c\/h5\u003e\n\u003cp\u003eNo. They occupy different mounting positions and primarily address different alignment measurements. Choose the component specified for your vehicle and the correction required.\u003c\/p\u003e\n\u003ch5\u003eDo adjustable control arms replace a professional alignment?\u003c\/h5\u003e\n\u003cp\u003eNo. Adjustable parts provide a way to change the settings. The final alignment still needs to be measured and adjusted after installation.\u003c\/p\u003e\n\u003ch5\u003eWill alignment parts fix uneven tire wear?\u003c\/h5\u003e\n\u003cp\u003eThey may help when incorrect alignment is a contributing cause, but they are not a complete diagnosis. Have tire pressure, tire condition, and worn or damaged suspension components checked before selecting correction parts.\u003c\/p\u003e\n\u003ch5\u003eAre all shock mounts adjustable?\u003c\/h5\u003e\n\u003cp\u003eNo. Many replacement mounts retain the original mounting geometry. Look for an explicitly stated camber or caster adjustment feature if alignment correction is your goal.\u003c\/p\u003e\n\u003ch4\u003eShop Alignment Components at Black Ops Auto Works\u003c\/h4\u003e\n\u003cp\u003eBuild your parts list around the correction your vehicle actually needs. Compare camber kits, caster hardware, toe links, and adjustable arms in this collection, or explore our \u003ca href=\"\/collections\/control-arms\"\u003econtrol arm selection\u003c\/a\u003e for related upgrades. Review product-specific fitment and installation instructions before ordering.\u003c\/p\u003e","products":[{"product_id":"jeep-grand-cherokee-billet-adjustable-rear-control-arms-srt-trackhawk","title":"Jeep Grand Cherokee Billet Adjustable Rear Control Arms SRT Trackhawk","description":"\u003ch4\u003e\u003cstrong\u003eBillet Adjustable Rear Upper Control Arms 2011-2021 Jeep Grand Cherokee\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe 300.2001J Billet Adjustable Rear Upper Control Arms are the best precision-engineered suspension upgrade for 2011-2021 Jeep Grand Cherokee owners seeking ultimate alignment control, reduced tire wear, and superior handling.\u003c\/p\u003e\n\u003cp\u003eCrafted from solid 6061-T6 billet aluminum with laser-cut plated steel adjustment tabs, these arms eliminate factory rubber bushing deflection and axial loading issues while offering easy camber\/toe tuning for lowered, lifted, or performance setups race-proven technology used by GRAND-AM teams.\u003c\/p\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e300.2001J\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear Upper Control Arms (Pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum w\/ Plated Steel Tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushings\u003c\/td\u003e\n\u003ctd\u003e85 Durometer Polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eCamber\/Toe via Swappable Tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodized or Raw (Application Specific)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eProduct Notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for lowered or performance-tuned Grand Cherokee corrects geometry and eliminates bump steer\u003c\/li\u003e\n\u003cli\u003eApply included silicone lube to bushings during install to prevent squeaking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEstimated time: 2-4 hours, moderate difficulty, jack stands and alignment rack recommended\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement professional alignment required to set proper camber\/toe after install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThis Part Fits\u003c\/h4\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2021\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGrand Cherokee\u003c\/td\u003e\n\u003ctd\u003eAll Models (WK2 Chassis)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhy Choose These Billet Adjustable Arms?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRace-proven tab design outperforms threaded competitors in durability and precision\u003c\/li\u003e\n\u003cli\u003eFEA-optimized by Stress Engineering for unmatched strength and reliability\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty ensures long-term performance for street and track use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e How much adjustment?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Multiple tab offsets for ±1.5°+ camber\/toe correction – ideal for lowered or lifted setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Is it street legal?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Yes, maintains proper alignment when set correctly – no noise or harshness increase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Will it make the ride harsher?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Minimal 85 Durometer bushings reduce deflection while preserving comfort.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Is alignment required?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Yes, full professional alignment essential after installation to set toe\/camber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eShipping \u0026amp; Handling\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod:\u003c\/strong\u003e UPS\/FedEx Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e In stock, ships same or next business day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Official retail box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExtra Silicone Lube\u003c\/strong\u003e\u003cbr\u003eFor optimal installation and long-term performance (especially with polyurethane bushings), we recommend Energy Suspension Formula 5 Prelube a waterproof, silicone-based grease with PTFE additives that prevents squeaks, protects against metal-to-metal contact, and handles severe conditions.\u003c\/p\u003e\n\u003cp\u003eYou can purchase the 8oz tub directly from us \u003ca href=\"https:\/\/www.blackopsautoworks.com\/products\/energy-suspension-8oz-tub-of-lubricant\" title=\"Energy Suspension 8oz Silicone Lubricant\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDetailed installation notes (including torque specs, tips, and steps for our Jeep control arms\/suspension components) are available in this guide:\u003cbr\u003e\u003ca href=\"https:\/\/drive.google.com\/file\/d\/1X0Vv8msFgBtUb12RLg4zZw45fPYMvws4\/view?usp=sharing\" title=\"Jeep Suspension Arms Installation Notes\"\u003eClick Here for Installation Instructions (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe happily ship within the USA, including to your preferred forwarder for international orders. For full details on shipping rates, lead times, policies on custom orders, damage claims, and more, please review our official policies \u003ca href=\"https:\/\/www.blackopsautoworks.com\/pages\/policies\" title=\"Black Ops Auto Works Shipping \u0026amp; Policies\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eOrders typically ship within 5–10 business days for in-stock items. Feel free to reach out if you have any questions!\u003c\/p\u003e","brand":"Black Ops Auto Works","offers":[{"title":"Default Title","offer_id":9477334277,"sku":"300.2001J","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/billet-arms-tab-adjustment.png?v=1768664214"},{"product_id":"jeep-grand-cherokee-adjustable-front-control-arms","title":"Black Ops Auto Works Adjustable Front Upper Control Arms - 2017-2021 Jeep Grand Cherokee SRT\/Trackhawk","description":"\u003cp\u003eDial in your alignment with Black Ops Auto Works Adjustable Front Upper Control Arms, built for the 2017-2021 Jeep Grand Cherokee SRT and Trackhawk (WK2 chassis). These CNC-machined billet aluminum arms replace the factory upper control arms and use a swappable tab system to correct camber and caster after a lowered or lifted suspension setup, without the deflection you get from worn factory bushings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrecision Billet Aluminum Construction – CNC-machined 6061-T6 aluminum for maximum strength and lightweight design.\u003c\/li\u003e\n\u003cli\u003eAdjustable Camber\/Caster – Innovative swappable tab system provides precise alignment corrections without threaded wear.\u003c\/li\u003e\n\u003cli\u003eHigh-Durometer Polyurethane Bushings – Energy Suspension bushings minimize deflection and oscillation for sharper response.\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On Fitment – Occupies OEM space with no modifications required.\u003c\/li\u003e\n\u003cli\u003ePair of Adjustable Front Upper Control Arms.\u003c\/li\u003e\n\u003cli\u003eEnergy Suspension polyurethane bushings (pre-installed).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2021\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGrand Cherokee\u003c\/td\u003e\n\u003ctd\u003eSRT and Trackhawk (WK2 chassis)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBlack Ops Auto Works\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront Upper Control Arms, Pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushings\u003c\/td\u003e\n\u003ctd\u003eEnergy Suspension High-Durometer Polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eCamber and Caster via Swappable Tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodized or Raw, Application Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eBlack Ops Auto Works Limited Lifetime Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Pair of Adjustable Front Upper Control Arms\u003c\/li\u003e\n\u003cli\u003eEnergy Suspension Polyurethane Bushings, Pre-Installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Black Ops Auto Works\u003c\/h4\u003e\n\u003cp\u003eBlack Ops Auto Works designs and machines adjustable suspension components for Jeep and Mopar performance vehicles, including this front upper control arm built specifically for the SRT and Trackhawk Grand Cherokee. Each set is CNC-machined and quality checked before it ships.\u003c\/p\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need an alignment after installing these arms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. A professional alignment is required after installation to properly set your camber and caster using the tab system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these arms work with a lowered Grand Cherokee?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. They are designed to correct the camber and caster geometry that shifts out of range on a lowered SRT or Trackhawk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these fit a non-SRT Grand Cherokee?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese are designed for the SRT and Trackhawk WK2 Grand Cherokee. Confirm your exact trim's front suspension geometry before ordering if you have a different trim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the bushings pre-installed or do I need to press them in myself?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Energy Suspension polyurethane bushings come pre-installed in the arms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much camber and caster adjustment do the tabs provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe tab system allows multiple offset positions so you can dial in camber and caster correction to match your specific ride height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs any cutting or drilling required to install these arms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. They bolt directly into the factory mounting locations with no cutting or drilling needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does installation typically take?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlan for roughly two to four hours with the vehicle raised and supported on jack stands, plus time for a post-installation alignment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I pair these with rear adjustable arms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Pairing front and rear adjustable arms gives you a more complete alignment correction if you have also modified your ride height at the rear.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRaise and support the vehicle by the frame, then remove the front wheel and tire assembly.\u003c\/li\u003e\n\u003cli\u003eRemove the factory upper control arm following the manufacturer's procedure for your Grand Cherokee.\u003c\/li\u003e\n\u003cli\u003eInstall the Black Ops control arm into the factory frame mounting points and torque the hardware to specification.\u003c\/li\u003e\n\u003cli\u003eConnect the ball joint to the steering knuckle and torque to specification.\u003c\/li\u003e\n\u003cli\u003eSet the tab position for your desired camber and caster correction before fully tightening the arm in place.\u003c\/li\u003e\n\u003cli\u003eReinstall the wheel and tire, lower the vehicle, and have a professional alignment performed to finalize camber and caster.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Black Ops Auto Works","offers":[{"title":"Default Title","offer_id":46035101548623,"sku":"300.2004.J17","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/black-ops-300-2004-jeep-grand-cherokee-front-control-arms.png?v=1782501222"},{"product_id":"aad-dodge-charger-challenger-300-magnum-billet-front-upper-control-arms","title":"AAD Dodge Charger Challenger 300 Magnum Billet Front Upper Control Arms","description":"\u003ch4\u003eBillet Front Upper Control Arms That Put Camber Back In Spec\u003c\/h4\u003e\n\u003cp\u003eThe AAD Performance C004-0000 billet front upper control arms replace the factory 2WD front uppers on the LX and LC platform so a lowered Charger, Challenger, Magnum, Chrysler 300 or Hellcat can be aligned properly again. The arms use an on-vehicle tab-lock system for repeatable camber adjustment and carry a Teflon lined spherical bearing angled five degrees to keep the joint from binding at full droop.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eCharger\u003c\/td\u003e\n\u003ctd\u003e2006-2022\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003e2008-2022\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChrysler\u003c\/td\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e2006-2022\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eMagnum\u003c\/td\u003e\n\u003ctd\u003e2006-2008\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eTwo-wheel-drive front suspension only. The manufacturer lists application as 2WD Charger, Challenger, Magnum, 300 and Hellcat. Confirm the vehicle against this list before ordering the C004-0000.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number family\u003c\/td\u003e\n\u003ctd\u003eC004-0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6511 billet aluminum and 17-4 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing\u003c\/td\u003e\n\u003ctd\u003eSpheriflex Delrin spherical bearing plus FK Teflon lined stainless spherical bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCamber adjustment\u003c\/td\u003e\n\u003ctd\u003eUp to 8 mm either direction versus stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing angle\u003c\/td\u003e\n\u003ctd\u003e5 degrees to prevent joint bind\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003ePair, driver and passenger side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e12.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinishes offered here\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Electric Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll specifications listed here are published by the manufacturer for the C004-0000.\u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDriver and passenger side C004-0000 front upper control arms\u003c\/li\u003e\n\u003cli\u003eHigh-strength plated mounting hardware\u003c\/li\u003e\n\u003cli\u003eLaser-cut adjustment tabs\u003c\/li\u003e\n\u003cli\u003eSilicone lubricant for the bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout AAD Performance\u003c\/h4\u003e\n\u003cp\u003eAAD Performance, also listed under the All Angles Design vendor name, designs and machines billet aluminum suspension, driveline and engine hardware in Kansas City, Missouri. The company is known for its patent pending Spheriflex bearing, its tab-lock adjustment system and OEM-CAD derived fitment, and it manufactures, assembles and packages its parts in the United States.\u003c\/p\u003e\n\u003cp\u003eWarranty: AADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aad-billet-rear-upper-control-arms-dodge-charger-challenger-300-magnum\"\u003eAAD Billet Rear Upper Control Arms\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aad-billet-trailing-tension-arms\"\u003eAAD Billet Trailing Tension Arms\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/control-arm-adjustment-tabs-from-8-to-9-mm\"\u003eControl Arm Adjustment Tabs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the C004-0000?\u003c\/strong\u003e\u003cp\u003eIt is the AAD Performance billet front upper control arm family for LX and LC platform Dodge, Chrysler and Hellcat models, supplied as a driver and passenger pair.\u003c\/p\u003e\n\u003cstrong\u003eHow much camber adjustment do these arms provide?\u003c\/strong\u003e\u003cp\u003eThe tab-lock system allows up to eight millimetres of movement in either direction compared with the stock setting.\u003c\/p\u003e\n\u003cstrong\u003eDo I need to remove the arm from the car to change camber?\u003c\/strong\u003e\u003cp\u003eNo. The tab-lock system is designed for on-vehicle adjustment, which is why it is used instead of a threaded sleeve.\u003c\/p\u003e\n\u003cstrong\u003eAre the spherical bearings serviceable?\u003c\/strong\u003e\u003cp\u003eYes. The FK stainless Teflon lined bearing is replaceable and the Spheriflex assembly is rebuildable.\u003c\/p\u003e\n\u003cstrong\u003eWill these arms bind at full droop?\u003c\/strong\u003e\u003cp\u003eThe spherical bearing is angled five degrees specifically to avoid joint bind when the suspension reaches full droop.\u003c\/p\u003e\n\u003cstrong\u003eAre these arms lighter than the factory parts?\u003c\/strong\u003e\u003cp\u003eEach arm is approximately one pound lighter than the factory component while being significantly stronger in all directions.\u003c\/p\u003e\n\u003cstrong\u003eDo they fit all-wheel-drive cars?\u003c\/strong\u003e\u003cp\u003eNo. The manufacturer lists this arm for two-wheel-drive front suspension applications.\u003c\/p\u003e\n\u003cstrong\u003eWhich finishes are available in this listing?\u003c\/strong\u003e\u003cp\u003eBlack, Red and Electric Blue anodized finishes are stocked here, each with Spheriflex bearings.\u003c\/p\u003e\n\u003cstrong\u003eIs an alignment required after installation?\u003c\/strong\u003e\u003cp\u003eYes. A full four-wheel alignment should be performed once the arms are installed and the tabs are set.\u003c\/p\u003e\n\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cp\u003eAADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eSupport the vehicle safely on a level surface and remove the front wheels.\u003c\/li\u003e\n\u003cli\u003eUnload the front suspension and separate the factory upper control arm from the knuckle.\u003c\/li\u003e\n\u003cli\u003eRemove the factory upper control arm from the shock tower.\u003c\/li\u003e\n\u003cli\u003eApply the supplied silicone lubricant to the bushing surfaces to prevent squeak.\u003c\/li\u003e\n\u003cli\u003eInstall the new arm at the chassis, leaving hardware loose.\u003c\/li\u003e\n\u003cli\u003eSelect the tab position that gives the camber target and lock the tabs.\u003c\/li\u003e\n\u003cli\u003eReconnect the arm to the knuckle and torque all fasteners to factory specification.\u003c\/li\u003e\n\u003cli\u003eRefit the wheels, lower the vehicle and have a full four-wheel alignment performed.\u003c\/li\u003e\n\u003cli\u003eFollow the manufacturer LXLC Front UCA instruction sheet for torque values and sequence.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"All Angles Design","offers":[{"title":"Black with Spheriflex bearings","offer_id":39297565917263,"sku":"02AADFCA-B","price":849.0,"currency_code":"USD","in_stock":true},{"title":"Red arms with Spheriflex bearings","offer_id":39297565950031,"sku":"02AADFCA-2","price":849.0,"currency_code":"USD","in_stock":true},{"title":"Electric Blue with Spheriflex bearings","offer_id":40595637698639,"sku":"02AADFCA-3","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/products\/aad-performance-c004-0000-front-upper-control-arms-front-view-01.jpg?v=1786290031"},{"product_id":"aad-billet-rear-upper-control-arms-dodge-charger-challenger-300-magnum","title":"AAD Billet Rear Upper Control Arms Dodge Charger, Challenger, 300, Magnum","description":"\u003ch4\u003eBillet Rear Upper Control Arms For Lowered And Tracked Mopars\u003c\/h4\u003e\n\u003cp\u003eThe AAD Performance C003-0000 billet rear upper control arms are CNC milled from billet aluminum and finished in Brite-Dip anodize for lowered or track driven LX and LC platform cars. Fitment is derived from OEM CAD data and the tab-lock alignment mechanism replaces guesswork with fixed, repeatable camber settings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCNC milled billet construction with Brite-Dip anodized finish\u003c\/li\u003e\n\u003cli\u003eOEM CAD derived geometry for direct replacement of the factory rear uppers\u003c\/li\u003e\n\u003cli\u003eTab-lock alignment mechanism gives fixed and repeatable camber settings\u003c\/li\u003e\n\u003cli\u003eEnergy Suspension polyurethane bushings at both ends, supplied pre-lubricated\u003c\/li\u003e\n\u003cli\u003eThree sets of tabs shipped with every C003-0000 pair so camber can be dialled in without buying extras\u003c\/li\u003e\n\u003cli\u003eSold as a matched pair for the left and right side of the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eCharger\u003c\/td\u003e\n\u003ctd\u003e2006-2023\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003e2008-2023\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChrysler\u003c\/td\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e2005-2023\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eMagnum\u003c\/td\u003e\n\u003ctd\u003e2005-2008\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eManufacturer application is the L-series Mopar rear suspension, with the retailer listing Charger, Challenger, 300 and Magnum. Confirm the vehicle against this list before ordering the C003-0000.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number family\u003c\/td\u003e\n\u003ctd\u003eC003-0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCNC milled billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBrite-Dip anodize\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushings\u003c\/td\u003e\n\u003ctd\u003eEnergy Suspension polyurethane, both ends, pre-lubricated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eTab-lock mechanism, 2 mm tabs installed with 4 mm and 6 mm tabs supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003ePair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e13.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinishes offered here\u003c\/td\u003e\n\u003ctd\u003eBlack, Blood Red, Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll specifications listed here are published by the manufacturer for the C003-0000.\u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePair of C003-0000 billet rear upper control arms\u003c\/li\u003e\n\u003cli\u003eThree sets of adjustment tabs: 2 mm installed plus 4 mm and 6 mm spares\u003c\/li\u003e\n\u003cli\u003eExtra bushing lubricant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout AAD Performance\u003c\/h4\u003e\n\u003cp\u003eAAD Performance, also listed under the All Angles Design vendor name, designs and machines billet aluminum suspension, driveline and engine hardware in Kansas City, Missouri. The company is known for its patent pending Spheriflex bearing, its tab-lock adjustment system and OEM-CAD derived fitment, and it manufactures, assembles and packages its parts in the United States.\u003c\/p\u003e\n\u003cp\u003eWarranty: AADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aad-dodge-charger-challenger-300-magnum-billet-front-upper-control-arms\"\u003eAAD Billet Front Upper Control Arms\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aad-wheel-hop-eliminator-kit\"\u003eAAD Wheel Hop Eliminator Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/control-arm-adjustment-tabs-from-8-to-9-mm\"\u003eControl Arm Adjustment Tabs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the C003-0000?\u003c\/strong\u003e\u003cp\u003eIt is the AAD Performance billet rear upper control arm family for L-series Mopar platforms, supplied as a left and right pair.\u003c\/p\u003e\n\u003cstrong\u003eDo I have to drop the rear cradle to install these?\u003c\/strong\u003e\u003cp\u003eNo, but installing with the cradle in place requires two grade 10.9 or better M12-1.75 x 60 bolts, which the manufacturer sells separately.\u003c\/p\u003e\n\u003cstrong\u003eWhat bushings are used?\u003c\/strong\u003e\u003cp\u003eEnergy Suspension polyurethane bushings are fitted at both ends and arrive pre-lubricated.\u003c\/p\u003e\n\u003cstrong\u003eHow is camber adjusted?\u003c\/strong\u003e\u003cp\u003eA tab-lock mechanism sets camber in fixed increments, so the setting cannot drift once the tabs are locked.\u003c\/p\u003e\n\u003cstrong\u003eWhich tab sizes are included?\u003c\/strong\u003e\u003cp\u003eThe two millimetre offset tabs are installed and four millimetre and six millimetre tabs are supplied in the box.\u003c\/p\u003e\n\u003cstrong\u003eAre these arms suitable for track use?\u003c\/strong\u003e\u003cp\u003eYes. The manufacturer positions them for lowered and track driven cars where the factory arms limit alignment.\u003c\/p\u003e\n\u003cstrong\u003eIs the finish anodized?\u003c\/strong\u003e\u003cp\u003eYes, the arms are finished in Brite-Dip anodize, and Black, Blood Red and Blue options are listed here.\u003c\/p\u003e\n\u003cstrong\u003eWill these correct camber on a lowered car?\u003c\/strong\u003e\u003cp\u003eThat is their purpose. The tab system moves camber back toward specification after a ride-height change.\u003c\/p\u003e\n\u003cstrong\u003eDo they include lubricant?\u003c\/strong\u003e\u003cp\u003eExtra bushing lubricant is included so the polyurethane bushings stay quiet.\u003c\/p\u003e\n\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cp\u003eAADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eRaise and safely support the rear of the vehicle and remove the rear wheels.\u003c\/li\u003e\n\u003cli\u003eSupport the rear cradle and unload the rear suspension.\u003c\/li\u003e\n\u003cli\u003eRemove the factory rear upper control arm hardware and withdraw the arm.\u003c\/li\u003e\n\u003cli\u003eFit the selected offset tabs to the new arm and leave the tab hardware loose.\u003c\/li\u003e\n\u003cli\u003eInstall the arm at the cradle and knuckle using the factory or supplied hardware.\u003c\/li\u003e\n\u003cli\u003eSet the tab position for the required camber and tighten the tab hardware.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to factory specification with the suspension at ride height.\u003c\/li\u003e\n\u003cli\u003eRepeat on the opposite side, then align the vehicle.\u003c\/li\u003e\n\u003cli\u003eInstalling without dropping the rear cradle requires two grade 10.9 or better M12-1.75 x 60 bolts, available from the manufacturer.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"All Angles Design","offers":[{"title":"Black","offer_id":39297561886799,"sku":"005-0081","price":749.0,"currency_code":"USD","in_stock":true},{"title":"Blood Red","offer_id":39297561919567,"sku":"00AADRCA-2","price":749.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":40595646709839,"sku":"00AADRCA-3","price":749.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/products\/aad-performance-c003-0000-rear-upper-control-arms-main-view-01.jpg?v=1786290046"},{"product_id":"aad-billet-trailing-tension-arms","title":"AAD Billet Trailing Tension Arms","description":"\u003ch4\u003eBillet Rear Trailing And Tension Arms With Spheriflex Bearings\u003c\/h4\u003e\n\u003cp\u003eThe AAD Performance C001-0000 billet trailing and tension arms replace the rear lower arms on LX and LC platform Dodge Charger, Challenger, Chrysler 300 and Dodge Magnum models. Machined from 6061-T651 billet, they come standard with the patent pending Spheriflex bearing so rear axle movement is controlled without the harshness of a solid bushing.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eCharger\u003c\/td\u003e\n\u003ctd\u003e2006-2023\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003e2008-2023\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChrysler\u003c\/td\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e2005-2023\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eMagnum\u003c\/td\u003e\n\u003ctd\u003e2005-2008\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eManufacturer application is the LX and LC platform rear lower trailing and tension arm position. Confirm the vehicle against this list before ordering the C001-0000.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number family\u003c\/td\u003e\n\u003ctd\u003eC001-0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T651 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing\u003c\/td\u003e\n\u003ctd\u003eSpheriflex spherical bearing sprung between Teflon impregnated Delrin races\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eServiceability\u003c\/td\u003e\n\u003ctd\u003eFully rebuildable bearing assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003ePair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e6.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinishes offered here\u003c\/td\u003e\n\u003ctd\u003eRed, Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll specifications listed here are published by the manufacturer for the C001-0000.\u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePair of C001-0000 billet trailing and tension arms fitted with Spheriflex bearings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout AAD Performance\u003c\/h4\u003e\n\u003cp\u003eAAD Performance, also listed under the All Angles Design vendor name, designs and machines billet aluminum suspension, driveline and engine hardware in Kansas City, Missouri. The company is known for its patent pending Spheriflex bearing, its tab-lock adjustment system and OEM-CAD derived fitment, and it manufactures, assembles and packages its parts in the United States.\u003c\/p\u003e\n\u003cp\u003eWarranty: AADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aad-billet-rear-upper-control-arms-dodge-charger-challenger-300-magnum\"\u003eAAD Billet Rear Upper Control Arms\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aad-wheel-hop-eliminator-kit\"\u003eAAD Wheel Hop Eliminator Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aad-adjustable-billet-rear-toe-arms-links-for-dodge-challenger-charger-magnum-300-hellcat-demon\"\u003eAAD Adjustable Billet Rear Toe Arms\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the C001-0000?\u003c\/strong\u003e\u003cp\u003eIt is the AAD Performance billet rear trailing and tension arm family for LX and LC platform Mopar models, sold as a pair.\u003c\/p\u003e\n\u003cstrong\u003eWhat does the Spheriflex bearing do?\u003c\/strong\u003e\u003cp\u003eIt is a spherical bearing sprung between two Teflon impregnated Delrin races, so deflection is removed without the noise a solid bushing creates.\u003c\/p\u003e\n\u003cstrong\u003eCan the bearing be rebuilt?\u003c\/strong\u003e\u003cp\u003eYes. The bearing assembly is designed to be serviced rather than replaced as a complete arm.\u003c\/p\u003e\n\u003cstrong\u003eWill these help with wheel hop?\u003c\/strong\u003e\u003cp\u003eThey control rear lower arm deflection, which is one of the contributors to wheel hop under hard launches.\u003c\/p\u003e\n\u003cstrong\u003eWhat material are the arms?\u003c\/strong\u003e\u003cp\u003eThey are machined from 6061-T651 billet aluminum.\u003c\/p\u003e\n\u003cstrong\u003eAre these stronger than the factory arms?\u003c\/strong\u003e\u003cp\u003eThe retailer states they are more than twice as strong as the factory parts.\u003c\/p\u003e\n\u003cstrong\u003eWhich finishes are stocked here?\u003c\/strong\u003e\u003cp\u003eRed and Black anodized arms, both with Spheriflex bearings.\u003c\/p\u003e\n\u003cstrong\u003eDo they add noise to the car?\u003c\/strong\u003e\u003cp\u003eThe manufacturer states the design reduces compliance without increasing noise, vibration or harshness.\u003c\/p\u003e\n\u003cstrong\u003eAre hardware and instructions needed from the vehicle?\u003c\/strong\u003e\u003cp\u003eThe factory fasteners locate the arm, and the manufacturer publishes a trailing arm instruction sheet for torque values.\u003c\/p\u003e\n\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cp\u003eAADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eRaise and safely support the rear of the vehicle and remove the rear wheels.\u003c\/li\u003e\n\u003cli\u003eUnload the rear suspension so the trailing arm hardware is not under load.\u003c\/li\u003e\n\u003cli\u003eRemove the factory rear lower trailing arm fasteners and withdraw the arm.\u003c\/li\u003e\n\u003cli\u003eCompare the new arm to the factory arm to confirm orientation.\u003c\/li\u003e\n\u003cli\u003eInstall the arm at the cradle and at the knuckle, leaving fasteners loose.\u003c\/li\u003e\n\u003cli\u003eBring the suspension to ride height.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to factory specification.\u003c\/li\u003e\n\u003cli\u003eRepeat on the opposite side and check rear alignment.\u003c\/li\u003e\n\u003cli\u003eRefer to the manufacturer LXLC trailing arm instruction sheet for torque values.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"All Angles Design","offers":[{"title":"Red with Spheriflex Bearings","offer_id":13599119278159,"sku":"AADTA-2","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Black with Spheriflex Bearings","offer_id":13599119245391,"sku":"AADTA-1","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/products\/aad-performance-c001-0000-trailing-tension-arms-main-view-01.jpg?v=1789047408"},{"product_id":"jeep-wk1-billet-adjustable-front-upper-control-arm-2006-2010","title":"Jeep WK1 Billet Adjustable Front Upper Control Arm 2006-2010","description":"\u003cp\u003eThe AAD Performance J001-0000 billet adjustable front upper control arms are built for the WK1 Jeep Grand Cherokee using the same construction as the company's Charger and Challenger front arms. They carry five millimetres of camber correction built in at the neutral setting and can move eight millimetres in either direction from there.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGrand Cherokee\u003c\/td\u003e\n\u003ctd\u003e2006-2010\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eWK1 generation Grand Cherokee front upper control arm position. Confirm the vehicle against this list before ordering the J001-0000.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number family\u003c\/td\u003e\n\u003ctd\u003eJ001-0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eBillet aluminum with stainless steel hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearings\u003c\/td\u003e\n\u003ctd\u003eSpheriflex bushing plus stainless FK Teflon lined spherical bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuilt-in correction\u003c\/td\u003e\n\u003ctd\u003e5 mm of camber correction at neutral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment range\u003c\/td\u003e\n\u003ctd\u003e8 mm in either direction from neutral\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard finish\u003c\/td\u003e\n\u003ctd\u003eBright black anodize\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e15.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll specifications listed here are published by the manufacturer for the J001-0000.\u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePair of J001-0000 billet adjustable front upper control arms\u003c\/li\u003e\n\u003cli\u003eMounting and adjustment hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout AAD Performance\u003c\/h4\u003e\n\u003cp\u003eAAD Performance, also listed under the All Angles Design vendor name, designs and machines billet aluminum suspension, driveline and engine hardware in Kansas City, Missouri. The company is known for its patent pending Spheriflex bearing, its tab-lock adjustment system and OEM-CAD derived fitment, and it manufactures, assembles and packages its parts in the United States.\u003c\/p\u003e\n\u003cp\u003eWarranty: AADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/control-arm-adjustment-tabs-from-8-to-9-mm\"\u003eControl Arm Adjustment Tabs\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aad-charger-jeep-challenger-billet-fuel-rails\"\u003eAAD Billet Fuel Rails\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the J001-0000?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is the AAD Performance billet adjustable front upper control arm family for the WK1 Jeep Grand Cherokee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much camber correction is built in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFive millimetres of correction is built in at the neutral setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far can the arms be adjusted?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEight millimetres in either direction from the neutral position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bearings are used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA Spheriflex bushing is used along with a stainless FK Teflon lined spherical bearing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat finish do the arms ship in?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey are delivered in bright black anodize; the manufacturer quotes custom colours separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these the same as the Charger arms?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThey are built the same way as the company's top of the line Charger and Challenger front arms, but with WK1 geometry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they suit a lifted or lowered Jeep?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe adjustment range covers settings from slightly negative to noticeably positive camber relative to stock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs stock always available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe manufacturer asks buyers to check before ordering because WK1 parts are not shipped in high volume.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs an alignment needed afterwards?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes, align the vehicle after the arms are installed and the tabs are set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSupport the Jeep safely and remove the front wheels.\u003c\/li\u003e\n\u003cli\u003eUnload the front suspension and separate the factory upper arm from the knuckle.\u003c\/li\u003e\n\u003cli\u003eRemove the factory arm from the chassis mount.\u003c\/li\u003e\n\u003cli\u003eInstall the new arm at the chassis mount with the tabs set to neutral.\u003c\/li\u003e\n\u003cli\u003eReconnect the outboard joint to the knuckle.\u003c\/li\u003e\n\u003cli\u003eAdjust the tab position if additional negative or positive camber is required.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to factory specification at ride height.\u003c\/li\u003e\n\u003cli\u003eRepeat on the opposite side and have the vehicle aligned.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"All Angles Design","offers":[{"title":"Default Title","offer_id":31858229706831,"sku":"AADWK1FA","price":829.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/all-angles-design-aadwk1fa-product-image-01-0671200335.jpg?v=1790715788"},{"product_id":"aad-mustang-s550-2015-rear-camber-arm-trailing-arm","title":"AAD Mustang S550 2015+ Rear Camber Arm \u0026 Trailing arm","description":"\u003ch4\u003eAdjustable Rear Camber Arms For The S550 And S650 Mustang\u003c\/h4\u003e\n\u003cp\u003eThe AAD Performance S002-0000 rear camber arm and link kit gives the 2015 and later Mustang fixed, repeatable rear camber adjustment. A tab adjustment system and a tongue-and-groove bolted joint replace the vague factory slot, and the kit ships with lockouts for the factory adjustment slots as standard.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTab adjustment system for fixed and repeatable rear camber settings\u003c\/li\u003e\n\u003cli\u003eTongue-and-groove bolted joint keeps the setting from moving under load\u003c\/li\u003e\n\u003cli\u003ePatented Spheriflex bearing at the outboard end\u003c\/li\u003e\n\u003cli\u003eEnergy Suspension polyurethane bushing at the inboard end\u003c\/li\u003e\n\u003cli\u003eLighter than the factory arm and than most aftermarket alternatives\u003c\/li\u003e\n\u003cli\u003eThe S002-0000 kit includes factory adjustment slot lockouts as standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003e2015-2026\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eManufacturer application is the S550 and S650 Mustang from 2015 onward. Confirm the vehicle against this list before ordering the S002-0000.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number family\u003c\/td\u003e\n\u003ctd\u003eS002-0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eTab system with tongue-and-groove bolted joint\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutboard bearing\u003c\/td\u003e\n\u003ctd\u003ePatented Spheriflex bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInboard bushing\u003c\/td\u003e\n\u003ctd\u003eEnergy Suspension polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eLighter than factory and most aftermarket arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e8.0 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinishes offered here\u003c\/td\u003e\n\u003ctd\u003eBlack, Blood Red, Electric Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll specifications listed here are published by the manufacturer for the S002-0000.\u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePair of S002-0000 rear camber arms and links\u003c\/li\u003e\n\u003cli\u003eFactory adjustment slot lockouts\u003c\/li\u003e\n\u003cli\u003eAdjustment tabs and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout AAD Performance\u003c\/h4\u003e\n\u003cp\u003eAAD Performance, also listed under the All Angles Design vendor name, designs and machines billet aluminum suspension, driveline and engine hardware in Kansas City, Missouri. The company is known for its patent pending Spheriflex bearing, its tab-lock adjustment system and OEM-CAD derived fitment, and it manufactures, assembles and packages its parts in the United States.\u003c\/p\u003e\n\u003cp\u003eWarranty: AADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/control-arm-adjustment-tabs-from-8-to-9-mm\"\u003eControl Arm Adjustment Tabs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the S002-0000?\u003c\/strong\u003e\u003cp\u003eIt is the AAD Performance rear camber arm and link kit family for the S550 and S650 Mustang.\u003c\/p\u003e\n\u003cstrong\u003eWhy use tabs instead of a threaded adjuster?\u003c\/strong\u003e\u003cp\u003eTabs give a fixed, repeatable setting, so alignment does not drift the way a slot or sleeve can.\u003c\/p\u003e\n\u003cstrong\u003eAre the factory slot lockouts included?\u003c\/strong\u003e\u003cp\u003eYes. Lockouts for the factory adjustment slot are included as standard.\u003c\/p\u003e\n\u003cstrong\u003eWhat bearing is used outboard?\u003c\/strong\u003e\u003cp\u003eThe patented Spheriflex bearing is used at the outboard end.\u003c\/p\u003e\n\u003cstrong\u003eWhat bushing is used inboard?\u003c\/strong\u003e\u003cp\u003eAn Energy Suspension polyurethane bushing is fitted inboard.\u003c\/p\u003e\n\u003cstrong\u003eAre these lighter than the stock arms?\u003c\/strong\u003e\u003cp\u003eThe manufacturer states they are lighter than the factory arm and than most aftermarket arms.\u003c\/p\u003e\n\u003cstrong\u003eWhich model years are covered?\u003c\/strong\u003e\u003cp\u003eThe manufacturer lists the S550 and S650 Mustang from 2015 onward.\u003c\/p\u003e\n\u003cstrong\u003eWhich finishes are offered here?\u003c\/strong\u003e\u003cp\u003eBlack, Blood Red and Electric Blue.\u003c\/p\u003e\n\u003cstrong\u003eIs an alignment required?\u003c\/strong\u003e\u003cp\u003eYes. Align the car once the arms are fitted and the tabs are set.\u003c\/p\u003e\n\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cp\u003eAADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eRaise and safely support the rear of the Mustang and remove the rear wheels.\u003c\/li\u003e\n\u003cli\u003eUnload the rear suspension before loosening the camber arm hardware.\u003c\/li\u003e\n\u003cli\u003eRemove the factory rear camber arm from the knuckle and the chassis.\u003c\/li\u003e\n\u003cli\u003eInstall the supplied lockouts in the factory adjustment slot.\u003c\/li\u003e\n\u003cli\u003eFit the new arm with the tabs set to the desired camber position.\u003c\/li\u003e\n\u003cli\u003eTighten the tongue-and-groove joint so the setting is locked.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to factory specification at ride height.\u003c\/li\u003e\n\u003cli\u003eRepeat on the opposite side and align the vehicle.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"All Angles Design","offers":[{"title":"Black","offer_id":40595657621583,"sku":"","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Blood Red","offer_id":40595657654351,"sku":"","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Electric Blue","offer_id":40595657687119,"sku":"","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/products\/aad-performance-s002-0000-s550-rear-camber-arms-main-view-01.jpg?v=1786290129"},{"product_id":"aad-adjustable-billet-rear-toe-arms-links-for-dodge-challenger-charger-magnum-300-hellcat-demon","title":"AAD Adjustable Billet Rear Toe Arms Links for Dodge Challenger\/Charger\/Magnum\/300\/Hellcat\/Demon","description":"\u003ch4\u003eAdjustable Billet Rear Toe Arms That Replace The Factory Cam Bolts\u003c\/h4\u003e\n\u003cp\u003eThe AAD Performance C014-0000 adjustable billet rear toe arms give a Dodge Challenger, Charger, Magnum or Chrysler 300 a fixed, repeatable rear toe setting. A tab system replaces the factory cam bolts, an Energy Suspension polyurethane bushing sits inboard and a Spheriflex bushing controls the outboard end.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eCharger\u003c\/td\u003e\n\u003ctd\u003e2006-2020\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003e2008-2020\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChrysler\u003c\/td\u003e\n\u003ctd\u003e300\u003c\/td\u003e\n\u003ctd\u003e2006-2020\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eMagnum\u003c\/td\u003e\n\u003ctd\u003e2006-2008\u003c\/td\u003e\n\u003ctd\u003eAll listed submodels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe manufacturer lists 2006 to 2020 Dodge Challenger, Charger, Magnum and Chrysler 300. Confirm the vehicle against this list before ordering the C014-0000.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number family\u003c\/td\u003e\n\u003ctd\u003eC014-0000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner bushing\u003c\/td\u003e\n\u003ctd\u003eEnergy Suspension polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter bushing\u003c\/td\u003e\n\u003ctd\u003eSpheriflex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eTab system replacing factory cam bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel clearance\u003c\/td\u003e\n\u003ctd\u003eClears most 15 inch wheels without modification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003e7.5 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinishes offered here\u003c\/td\u003e\n\u003ctd\u003eBlack, Red, Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eAll specifications listed here are published by the manufacturer for the C014-0000.\u003c\/p\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePair of C014-0000 adjustable billet rear toe arms\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003cli\u003eCustom made lockout plates\u003c\/li\u003e\n\u003cli\u003ePrinted instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout AAD Performance\u003c\/h4\u003e\n\u003cp\u003eAAD Performance, also listed under the All Angles Design vendor name, designs and machines billet aluminum suspension, driveline and engine hardware in Kansas City, Missouri. The company is known for its patent pending Spheriflex bearing, its tab-lock adjustment system and OEM-CAD derived fitment, and it manufactures, assembles and packages its parts in the United States.\u003c\/p\u003e\n\u003cp\u003eWarranty: AADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aad-billet-rear-upper-control-arms-dodge-charger-challenger-300-magnum\"\u003eAAD Billet Rear Upper Control Arms\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/aad-billet-trailing-tension-arms\"\u003eAAD Billet Trailing Tension Arms\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/control-arm-adjustment-tabs-from-8-to-9-mm\"\u003eControl Arm Adjustment Tabs\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the C014-0000?\u003c\/strong\u003e\u003cp\u003eIt is the AAD Performance adjustable billet rear toe arm family for Challenger, Charger, Magnum and Chrysler 300 models.\u003c\/p\u003e\n\u003cstrong\u003eDo these replace the factory cam bolts?\u003c\/strong\u003e\u003cp\u003eYes. The tab system takes over from the factory cam bolt adjustment and lockout plates hold the factory adjusters still.\u003c\/p\u003e\n\u003cstrong\u003eWhat bushings are used?\u003c\/strong\u003e\u003cp\u003eAn Energy Suspension polyurethane bushing inboard and a Spheriflex bushing outboard.\u003c\/p\u003e\n\u003cstrong\u003eWill they clear small wheels?\u003c\/strong\u003e\u003cp\u003eThe manufacturer states they clear most fifteen inch wheels with no modification.\u003c\/p\u003e\n\u003cstrong\u003eWhich years does the manufacturer list?\u003c\/strong\u003e\u003cp\u003e2006 through 2020 for Challenger, Charger, Magnum and Chrysler 300.\u003c\/p\u003e\n\u003cstrong\u003eAre lockout plates included?\u003c\/strong\u003e\u003cp\u003eYes, custom made lockout plates are supplied with the arms.\u003c\/p\u003e\n\u003cstrong\u003eIs clearance an issue on a very low car?\u003c\/strong\u003e\u003cp\u003eThe manufacturer warns that clearance is limited on very low cars, so check before ordering.\u003c\/p\u003e\n\u003cstrong\u003eWhich finishes are stocked here?\u003c\/strong\u003e\u003cp\u003eBlack, Red and Blue.\u003c\/p\u003e\n\u003cstrong\u003eIs a rear alignment needed?\u003c\/strong\u003e\u003cp\u003eYes. Set the tabs and then confirm rear toe on an alignment rack.\u003c\/p\u003e\n\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cp\u003eAADPerformance Limited One Year Warranty. Defect coverage runs one year from the date of original purchase and applies to the original purchaser only. Installed parts cannot be returned, and unused non-warranty returns are subject to a 15 percent restocking fee.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eRaise and safely support the rear of the vehicle and remove the rear wheels.\u003c\/li\u003e\n\u003cli\u003eUnload the rear suspension before loosening the toe link hardware.\u003c\/li\u003e\n\u003cli\u003eRemove the factory toe link and the factory cam bolt hardware.\u003c\/li\u003e\n\u003cli\u003eFit the custom lockout plates so the factory adjustment cannot move.\u003c\/li\u003e\n\u003cli\u003eInstall the new arm with the tabs set for the target toe value.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to factory specification at ride height.\u003c\/li\u003e\n\u003cli\u003eRepeat on the opposite side.\u003c\/li\u003e\n\u003cli\u003eAlign the rear axle and confirm the toe reading, noting that very low cars have limited clearance.\u003c\/li\u003e\n\u003cli\u003eRefer to the manufacturer LCLX rear toe instruction sheet for torque values.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"All Angles Design","offers":[{"title":"Black","offer_id":39297567064143,"sku":"C014-0000-Bk","price":419.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":39297567096911,"sku":"C014-0000-R","price":419.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":45364957675599,"sku":"C014-0000-Blu","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/all-angles-design-c014-0000-bk-product-image-01-6413051983.png?v=1790715727"},{"product_id":"jeep-grand-cherokee-billet-rear-toe-links","title":"Jeep Grand Cherokee Billet Rear Toe Links","description":"\u003cdiv\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 300.20022\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eBlack Ops Auto Works Billet Aluminum Rear Toe Links for 2011–2021 Jeep Grand Cherokee WK2 (incl. SRT \/ Trackhawk)\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eStrengthen the rear suspension of your 2011–2021 Jeep Grand Cherokee WK2 with Black Ops Auto Works Billet Aluminum Rear Toe Links. These precision-engineered links are designed to withstand hard acceleration and high-power applications where stock toe links commonly bend. Crafted from 6061-T6 billet aluminum with Energy Suspension polyurethane bushings, they are 0.5 lbs lighter per side than factory units while providing superior strength and reduced flex for improved handling and stability.\u003c\/p\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable width=\"100%\" cellspacing=\"0\" cellpadding=\"8\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBlack Ops Auto Works\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBillet Aluminum Rear Toe Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2011–2021 Jeep Grand Cherokee WK2 (incl. SRT \/ Trackhawk)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushings\u003c\/td\u003e\n\u003ctd\u003eEnergy Suspension Polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Brite Dip Anodize\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eBlack Ops Auto Works Limited Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhats Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePair of Billet Aluminum Rear Toe Links\u003c\/li\u003e\n\u003cli\u003eEnergy Suspension Polyurethane Bushings (Pre-Installed)\u003c\/li\u003e\n\u003cli\u003eE-Brake Cable Clips\u003c\/li\u003e\n\u003cli\u003eSoft Foam Protective Packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for high-power and performance applications to prevent bending under load\u003c\/li\u003e\n\u003cli\u003eApply silicone lubricant to bushings during installation to prevent squeaking\u003c\/li\u003e\n\u003cli\u003eProfessional installation and alignment recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThis Part Fits\u003c\/h4\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"8\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011–2021\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGrand Cherokee WK2\u003c\/td\u003e\n\u003ctd\u003eAll Trims including SRT and Trackhawk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhy Choose Black Ops Auto Works?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpecialist in premium billet aluminum suspension components for modern Jeeps\u003c\/li\u003e\n\u003cli\u003eSignificant weight savings and increased strength over stock parts\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA with attention to detail and durability\u003c\/li\u003e\n\u003cli\u003eTrusted by Grand Cherokee enthusiasts for reliable performance upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Will these toe links fit my 2018 Jeep Grand Cherokee Trackhawk?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Yes. They are designed specifically for all 2011–2021 Grand Cherokee WK2 models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e How much lighter are these compared to stock?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Each side is approximately 0.5 lbs lighter than the factory toe links.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Is professional installation recommended?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Yes. Proper installation and alignment are critical for safety and handling performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eShipping \u0026amp; Handling\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod:\u003c\/strong\u003e UPS Ground or FedEx Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e In stock – ships same or next business day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Secure custom foam protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Black Ops Auto Works","offers":[{"title":"Default Title","offer_id":32853925724239,"sku":"300.20022","price":348.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/black-ops-auto-works-300-20022-product-image-01-5187661903.png?v=1790716364"},{"product_id":"bbk-1986-1998-mustang-rear-lower-and-upper-control-arm-kit-4","title":"BBK 1986-1998 Mustang Rear Lower And Upper Control Arm Kit (4)","description":"\u003cp\u003eThis BBK suspension or chassis component is designed for the exact vehicle or component configuration identified on this page. Review the verified fitment or universal interface, specifications, included parts, and installation requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComplete Kit Includes Both Lower and Upper Control Arms.\u003c\/li\u003e\n\u003cli\u003eImproves Traction for Better Launch and Handling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1994-1998\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1996-1998\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1981\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGhia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1984\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1985-1986\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eLX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eBBK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e2526\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eControl Arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread or Fitting\u003c\/th\u003e\n\u003ctd\u003e1986-1998, 79-98, 1979-1998, 3-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEngine or Platform Requirement\u003c\/th\u003e\n\u003ctd\u003eV6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific, verify the complete application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new BBK product identified by manufacturer part number 2526. Gaskets, fasteners, wiring, sensors, fittings, clamps, filters, fluids, tuning, and companion components are included only when expressly stated for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout BBK\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBBK develops intake, throttle-body, exhaust, fuel, oil-separation, and chassis products for domestic performance vehicles. Product selection remains exact-application and exact-part-number specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated BBK Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bbk-99-04-mustang-rear-lower-and-upper-control-arm-kit-4\"\u003eBBK 99-04 Mustang Rear Lower And Upper Control Arm Kit (4)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bbk-1986-1998-mustang-rear-lower-control-arm-kit\"\u003eBBK 1986-1998 Mustang Rear Lower Control Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bbk-1986-2004-mustang-bbk-rear-lower-control-arm-replacement-bushing-kit\"\u003eBBK 1986-2004 Mustang BBK Rear Lower Control Arm Replacement Bushing Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/bbk\"\u003eBBK collection\u003c\/a\u003e for related airflow, exhaust, fuel, and chassis components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this BBK suspension or chassis component fit my 1994-1998 Ford Mustang Base?\u003c\/strong\u003e\u003cbr\u003eThat application is listed, but confirm the engine in Specifications, transmission, drivetrain, body style, emissions equipment, production split, and every BBK note before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill alignment be required after installation?\u003c\/strong\u003e\u003cbr\u003eAlignment is recommended whenever the part changes suspension position or geometry. Confirm torque and inspect tire and component clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this be installed with other suspension modifications?\u003c\/strong\u003e\u003cbr\u003eCompatibility depends on ride height, dampers, springs, brakes, wheels, tires, and companion arms or mounts. Test all clearances through full travel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current BBK instructions and vehicle service information for this exact part number. Confirm the application, interfaces, tools, hardware, fluids, torque values, wiring, clearances, emissions equipment, calibration, leak checks, and startup procedure before returning the vehicle to service. Professional installation is recommended for fuel, exhaust, suspension, drivetrain, or electronic throttle work.\u003c\/p\u003e","brand":"BBK","offers":[{"title":"Default Title","offer_id":39663577464911,"sku":"BBK2526","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/bbk-86-98-mustang-rear-lower-and-upper-control-arm-kit-4-control-arms-bbk.jpg?v=1698672046"},{"product_id":"belltech-shock-extension-kit-99-06-gm-gmc","title":"Belltech SHOCK EXTENSION KIT 99-06 GM\/GMC","description":"\u003cp\u003eThis Belltech shock or strut is engineered for the verified 1999-2006 Chevrolet Silverado 1500 All cabs application listed below. It is selected by exact manufacturer part number 6654, so confirm every fitment note, suspension configuration, ride-height requirement, and included component before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOn aggressively lowered vehicles, this aids in correcting shock angle and increasing travel.\u003c\/li\u003e\n\u003cli\u003eMade of stamped heavy gauge P\u0026amp;O steel, then powdercoated for a quality finish and durability.\u003c\/li\u003e\n\u003cli\u003eBelltech shock extensions are designed to relocate the connecting point of the lower shock mount.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eAll cabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eAll cabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eBelltech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e6654\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eShock Mounts \u0026amp; Camber Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific, verify the complete application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Belltech product identified by manufacturer part number 6654. Mounts, isolators, fasteners, alignment parts, bump stops, tools, and companion components are included only when expressly stated for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Belltech\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBelltech develops lowering, lifting, shock, strut, coilover, spring, sway-bar, spindle, and related suspension products for trucks, SUVs, and performance vehicles. Product selection remains exact-application and exact-part-number specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Belltech Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belltech-shock-extension-kit-88-98-gm-gmc\"\u003eBelltech SHOCK EXTENSION KIT 88-98 GM\/GMC\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belltech-99-06-gmc-sierra-1500-chevrolet-silverado-1500-nitro-drop-2-shock-absorber-set\"\u003eBelltech 99-06 GMC Sierra 1500 \/ Chevrolet Silverado 1500 Nitro Drop 2 Shock Absorber Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belltech-shock-extension-kit-00-tahoe-suburban-avalanche\"\u003eBelltech SHOCK EXTENSION KIT 00+ TAHOE\/SUBURBAN\/AVALANCHE\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/belltech\"\u003eBelltech collection\u003c\/a\u003e for related suspension components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this Belltech part fit my 1999-2006 Chevrolet Silverado 1500 All cabs?\u003c\/strong\u003e\u003cbr\u003eThat application is listed, but confirm the drivetrain, cab or body style, bed length, factory suspension, production split, current ride height, and every Belltech application note before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need an alignment after installation?\u003c\/strong\u003e\u003cbr\u003eAn alignment is recommended whenever ride height or suspension geometry changes. Verify tire clearance, steering travel, brake-line routing, headlight aim, and all fastener torque after the work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include every part needed for installation?\u003c\/strong\u003e\u003cbr\u003eOnly parts expressly stated for this exact manufacturer part number are included. Reuse or replacement of mounts, isolators, hardware, alignment parts, bump stops, and related components depends on the application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current Belltech instructions and vehicle service information for this exact part number. Support the vehicle safely, use the specified tools and torque values, inspect all mounts and hardware, verify brake-line and tire clearance, settle the suspension, and complete an alignment when geometry or ride height changes. Professional installation is recommended.\u003c\/p\u003e","brand":"Belltech","offers":[{"title":"Default Title","offer_id":39663944663119,"sku":"BEL6654","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/belltech-shock-extension-kit-99-06-gmgmc-shock-mounts-camber-plates-belltech.jpg?v=1722003976"},{"product_id":"belltech-shock-extension-kit-97-03-f150-std-ext-cab-only","title":"Belltech SHOCK EXTENSION KIT 97-03 F150 STD\/EXT CAB ONLY","description":"\u003cp\u003eThis Belltech shock or strut is engineered for the verified 1997-2003 Ford F-150 Extended cab application listed below. It is selected by exact manufacturer part number 6656, so confirm every fitment note, suspension configuration, ride-height requirement, and included component before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOn aggressively lowered vehicles, this aids in correcting shock angle and increasing travel.\u003c\/li\u003e\n\u003cli\u003eMade of stamped heavy gauge P\u0026amp;O steel, then powdercoated for a quality finish and durability.\u003c\/li\u003e\n\u003cli\u003eBelltech shock extensions are designed to relocate the connecting point of the lower shock mount.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1997-2003\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eExtended cab\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eBelltech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e6656\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eShock Mounts \u0026amp; Camber Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific, verify the complete application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Belltech product identified by manufacturer part number 6656. Mounts, isolators, fasteners, alignment parts, bump stops, tools, and companion components are included only when expressly stated for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Belltech\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBelltech develops lowering, lifting, shock, strut, coilover, spring, sway-bar, spindle, and related suspension products for trucks, SUVs, and performance vehicles. Product selection remains exact-application and exact-part-number specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Belltech Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belltech-shock-extension-kit-00-tahoe-suburban-avalanche\"\u003eBelltech SHOCK EXTENSION KIT 00+ TAHOE\/SUBURBAN\/AVALANCHE\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belltech-shock-extension-kit-88-98-gm-gmc\"\u003eBelltech SHOCK EXTENSION KIT 88-98 GM\/GMC\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belltech-shock-extension-kit-99-06-gm-gmc\"\u003eBelltech SHOCK EXTENSION KIT 99-06 GM\/GMC\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/belltech\"\u003eBelltech collection\u003c\/a\u003e for related suspension components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this Belltech part fit my 1997-2003 Ford F-150 Extended cab?\u003c\/strong\u003e\u003cbr\u003eThat application is listed, but confirm the drivetrain, cab or body style, bed length, factory suspension, production split, current ride height, and every Belltech application note before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need an alignment after installation?\u003c\/strong\u003e\u003cbr\u003eAn alignment is recommended whenever ride height or suspension geometry changes. Verify tire clearance, steering travel, brake-line routing, headlight aim, and all fastener torque after the work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include every part needed for installation?\u003c\/strong\u003e\u003cbr\u003eOnly parts expressly stated for this exact manufacturer part number are included. Reuse or replacement of mounts, isolators, hardware, alignment parts, bump stops, and related components depends on the application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current Belltech instructions and vehicle service information for this exact part number. Support the vehicle safely, use the specified tools and torque values, inspect all mounts and hardware, verify brake-line and tire clearance, settle the suspension, and complete an alignment when geometry or ride height changes. Professional installation is recommended.\u003c\/p\u003e","brand":"Belltech","offers":[{"title":"Default Title","offer_id":39663944990799,"sku":"BEL6656","price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/belltech-shock-extension-kit-97-03-f150-stdext-cab-only-shock-mounts-camber-plates-belltech.jpg?v=1698681124"},{"product_id":"fleece-performance-2500-and-3500-low-profile-shock-mounts","title":"Fleece Performance 2500 and 3500 Low Profile Shock Mounts","description":"\u003cp\u003eThese low profile shock mounts are built from high quality 1\/4\" 304 stainless steel and are perfect for gaining the necessary room under the hood of your Dodge when installing an aftermarket turbo, compound turbos, or when you just want more room to work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBuilt from high quality 1\/4 inch 304 stainless steel and are perfect for gaining the necessary room under the hood of your Dodge when installing an aftermarket turbo, compund turbos, or when you just want more room to work.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1994-2002\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, drivetrain, body configuration, factory equipment, and connector or mounting details\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, drivetrain, body configuration, factory equipment, and connector or mounting details\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2010\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, drivetrain, body configuration, factory equipment, and connector or mounting details\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2014\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e2500\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, drivetrain, body configuration, factory equipment, and connector or mounting details\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2014\u003c\/td\u003e\n\u003ctd\u003eRam\u003c\/td\u003e\n\u003ctd\u003e3500\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, drivetrain, body configuration, factory equipment, and connector or mounting details\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFleece Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eFPE-LPSM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eShock Mounts \u0026amp; Camber Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003estainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Fleece Performance product identified by manufacturer part number FPE-LPSM. Additional fittings, fluids, hoses, wiring, tuning, tools, and hardware are included only when expressly stated for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Fleece Performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFleece Performance Engineering develops diesel fuel-system, turbocharger, cooling, valvetrain, engine, and electrical components for Cummins, Duramax, Power Stroke, and related applications. Correct selection depends on the exact part number and complete application details.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Fleece Performance Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/fleece-performance\"\u003eShop all Fleece Performance products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fleece-07-5-18-dodge-ram-2500-6-7l-cummins-fuel-injection-line-set\"\u003eFleece 07.5-18 Dodge Ram 2500 6.7L Cummins Fuel Injection Line Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fleece-performance-00-18-dodge-2500-3500cummins-5-9l-6-7l-fuel-heater-connector-6in-pigtail\"\u003eFleece Performance 00-18 Dodge 2500\/3500Cummins 5.9L\/6.7L Fuel Heater Connector \u0026amp; 6in Pigtail\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fleece-performance-03-12-dodge-2500-3500-cummins-5-9l-6-7l-heater-feed-and-return-hose-kit\"\u003eFleece Performance 03-12 Dodge 2500\/3500 Cummins 5.9L\/6.7L Heater Feed and Return Hose Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Fleece Performance FPE-LPSM fits?\u003c\/strong\u003e\u003cbr\u003eMatch every year, make, model, and application note in the fitment table. Confirm engine, drivetrain, body configuration, factory equipment, connectors, and any exclusions before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with Fleece Performance FPE-LPSM?\u003c\/strong\u003e\u003cbr\u003eThe listing includes only the components stated in the What's Included section. Related fittings, wiring, fluids, tools, and supporting parts are not included unless expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installation require tuning or additional parts?\u003c\/strong\u003e\u003cbr\u003eRequirements vary by application. Confirm tuning, calibration, fluids, seals, fittings, wiring, specialty tools, and supporting modifications before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eVerify the exact application and inspect every included component before installation.\u003c\/li\u003e\n\u003cli\u003eFollow the current Fleece Performance instructions for the exact part number, including all torque, sealing, wiring, fluid, clearance, priming, and calibration requirements.\u003c\/li\u003e\n\u003cli\u003eCheck for leaks, fault codes, abnormal operation, and loose connections after startup and again after the initial drive.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Fleece Performance","offers":[{"title":"Default Title","offer_id":39665457266767,"sku":"FPEFPE-LPSM","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/fleece-performance-fpefpe-lpsm-shock-mounts-camber-plates-image-01.png?v=1788641931"},{"product_id":"hotchkis-02-mini-rear-camber-links-2-lower-links","title":"Hotchkis 02+ Mini Rear Camber Links 2 Lower Links","description":"\u003cp\u003eThe Hotchkis 02+ Mini Rear Camber Links 2 Lower Links is a camber kits for the normalized year, make, and model applications shown below. Match manufacturer part number 13800, year, make, model, chassis, axle position, suspension package, ride height, dimensions, and package contents before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith the Links pre-set to the stock length you can then use that camber setting as your new baseline.\u003c\/li\u003e\n\u003cli\u003eThe Links themselves are made up of two tubular steel outer arms with a billet aluminum hex center.\u003c\/li\u003e\n\u003cli\u003eThe polyurethane bushings can be greased by utilizing the zerk fittings at each end.\u003c\/li\u003e\n\u003cli\u003eHotchkis Sport Suspension 13800 Sport Rear Camber Links for 2002-2009 Mini Cooper and Copper S have an adjustment range from zero to negative four degrees for increased rear grip are fully built and pre-set to the stock length with greasable bushings.\u003c\/li\u003e\n\u003cli\u003eThe Sport Rear Camber Links are designed and tested to suit any street or track environment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2002-2012\u003c\/td\u003e\n\u003ctd\u003eMini\u003c\/td\u003e\n\u003ctd\u003eCooper\u003c\/td\u003e\n\u003ctd\u003eConfirm chassis, suspension package, axle position, ride height, and every exact Hotchkis application note\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHotchkis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e13800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Type\u003c\/th\u003e\n\u003ctd\u003eRear Camber Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle Platform\u003c\/th\u003e\n\u003ctd\u003eMini Cooper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdjustment Range\u003c\/th\u003e\n\u003ctd\u003e0 to -4 Degrees Camber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdjustable\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePreset Length\u003c\/th\u003e\n\u003ctd\u003eStock Length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Arm Material\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Arm Construction\u003c\/th\u003e\n\u003ctd\u003eTubular\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenter Section\u003c\/th\u003e\n\u003ctd\u003eBillet Aluminum Hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBushing Material\u003c\/th\u003e\n\u003ctd\u003ePolyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Hotchkis camber kits package identified by manufacturer part number 13800, in the configuration and quantity stated by the title. Bars, springs, links, arms, bushings, brackets, joints, shocks, tools, lubricant, and mounting hardware are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Hotchkis\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHotchkis Sport Suspension develops sway bars, springs, chassis braces, control arms, end links, dampers, and related suspension components for street and performance vehicle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Hotchkis Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hotchkis\"\u003eShop all Hotchkis products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-02-mini-rear-camber-links-2-upper-lower-links\"\u003eHotchkis 02+ Mini Rear Camber Links 2 Upper \u0026amp; Lower Links\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-02-06-mini-competition-rear-sway-bar\"\u003eHotchkis 02-06 Mini Competition Rear Sway Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-02-06-mini-cooper-competition-rear-sway-bar-rebuild-kit-22810r\"\u003eHotchkis 02-06 Mini Cooper Competition Rear Sway Bar Rebuild Kit (22810R)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this Hotchkis component fit my exact vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the year, make, and model in the Fitment table, then confirm chassis, suspension package, axle position, brake or spindle configuration, ride height, and every application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include all required mounting hardware?\u003c\/strong\u003e\u003cbr\u003ePackage contents vary by part number. Confirm the title, specifications, and current Hotchkis instructions for bushings, brackets, joints, fasteners, spacers, and any factory hardware that must be reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill installation require an alignment?\u003c\/strong\u003e\u003cbr\u003ePlan for a professional alignment whenever control arms, links, ball joints, camber parts, springs, or mounting geometry are changed. Chassis braces and service parts may not require alignment when installed without disturbing adjustment points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow current Hotchkis instructions and the vehicle service manual for part number 13800. Support the vehicle safely, preserve component orientation, use the specified lubricant and fasteners, torque every connection at the directed suspension position, confirm brake-line, tire, exhaust, and chassis clearance, test full suspension travel, align the vehicle when geometry changes, and recheck hardware after the initial drive.\u003c\/p\u003e","brand":"Hotchkis","offers":[{"title":"Default Title","offer_id":39671793975375,"sku":"HOT13800","price":337.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/hotchkis-hot13800-camber-kits-image-01.jpg?v=1788699262"},{"product_id":"hotchkis-02-mini-rear-camber-links-2-upper-lower-links","title":"Hotchkis 02+ Mini Rear Camber Links 2 Upper \u0026  Lower Links","description":"\u003cp\u003eThe Hotchkis 02+ Mini Rear Camber Links 2 Upper \u0026amp; Lower Links is a camber kits for the normalized year, make, and model applications shown below. Match manufacturer part number 13810, year, make, model, chassis, axle position, suspension package, ride height, dimensions, and package contents before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWith the Links pre-set to the stock length you can then use that camber setting as your new baseline.\u003c\/li\u003e\n\u003cli\u003eThe Links themselves are made up of two tubular steel outer arms with a billet aluminum hex center.\u003c\/li\u003e\n\u003cli\u003eThe polyurethane bushings can be greased by utilizing the zerk fittings at each end.\u003c\/li\u003e\n\u003cli\u003eHotchkis Sport Suspension 13810 Competition or Street Rear Camber Links for 2002-2009 Mini Cooper and Copper S have a zero to negative four degrees for increased rear grip are fully built and pre-set to the stock length with greasable bushings.\u003c\/li\u003e\n\u003cli\u003eThe Sport Rear Camber Links are designed and tested to suit any street or track environment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2002-2012\u003c\/td\u003e\n\u003ctd\u003eMini\u003c\/td\u003e\n\u003ctd\u003eCooper\u003c\/td\u003e\n\u003ctd\u003eConfirm chassis, suspension package, axle position, ride height, and every exact Hotchkis application note\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHotchkis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e13810\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Type\u003c\/th\u003e\n\u003ctd\u003eCompetition Rear Camber Link Set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle Platform\u003c\/th\u003e\n\u003ctd\u003eMini Cooper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamber Adjustment Range\u003c\/th\u003e\n\u003ctd\u003e0 to -4 Degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCamber Adjustable\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eToe Adjustment Capability\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUpper Links Included\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLower Links Included\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePreset Length\u003c\/th\u003e\n\u003ctd\u003eStock Length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOuter Arm Material\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Hotchkis camber kits package identified by manufacturer part number 13810, in the configuration and quantity stated by the title. Bars, springs, links, arms, bushings, brackets, joints, shocks, tools, lubricant, and mounting hardware are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Hotchkis\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHotchkis Sport Suspension develops sway bars, springs, chassis braces, control arms, end links, dampers, and related suspension components for street and performance vehicle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Hotchkis Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hotchkis\"\u003eShop all Hotchkis products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-02-mini-rear-camber-links-2-lower-links\"\u003eHotchkis 02+ Mini Rear Camber Links 2 Lower Links\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-02-06-mini-competition-rear-sway-bar\"\u003eHotchkis 02-06 Mini Competition Rear Sway Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-02-06-mini-cooper-competition-rear-sway-bar-rebuild-kit-22810r\"\u003eHotchkis 02-06 Mini Cooper Competition Rear Sway Bar Rebuild Kit (22810R)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this Hotchkis component fit my exact vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the year, make, and model in the Fitment table, then confirm chassis, suspension package, axle position, brake or spindle configuration, ride height, and every application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this listing include all required mounting hardware?\u003c\/strong\u003e\u003cbr\u003ePackage contents vary by part number. Confirm the title, specifications, and current Hotchkis instructions for bushings, brackets, joints, fasteners, spacers, and any factory hardware that must be reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill installation require an alignment?\u003c\/strong\u003e\u003cbr\u003ePlan for a professional alignment whenever control arms, links, ball joints, camber parts, springs, or mounting geometry are changed. Chassis braces and service parts may not require alignment when installed without disturbing adjustment points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow current Hotchkis instructions and the vehicle service manual for part number 13810. Support the vehicle safely, preserve component orientation, use the specified lubricant and fasteners, torque every connection at the directed suspension position, confirm brake-line, tire, exhaust, and chassis clearance, test full suspension travel, align the vehicle when geometry changes, and recheck hardware after the initial drive.\u003c\/p\u003e","brand":"Hotchkis","offers":[{"title":"Default Title","offer_id":39671794073679,"sku":"HOT13810","price":651.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/hotchkis-hot13810-camber-kits-image-01.jpg?v=1788699262"},{"product_id":"hotchkis-64-5-66-ford-mustang-front-shock-mount-brackets","title":"Hotchkis 64.5-66 Ford Mustang Front Shock Mount Brackets","description":"\u003cp\u003eThe Hotchkis 64.5-66 Ford Mustang Front Shock Mount Brackets is a shock mounts \u0026amp; camber plates for the normalized year, make, and model applications shown below. Match manufacturer part number 23414, year, make, model, chassis, axle position, suspension package, ride height, dimensions, and package contents before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe cut outs allow for easy access.\u003c\/li\u003e\n\u003cli\u003eOur shock mounts are laser cut and formed and welded in our own facility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eConfirm chassis, suspension package, axle position, ride height, and every exact Hotchkis application note\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHotchkis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e23414\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eShock Mounts \u0026amp; Camber Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Type\u003c\/th\u003e\n\u003ctd\u003eSway Bar Mounting Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle Specific\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eOne kit or set as supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Hotchkis shock mounts \u0026amp; camber plates package identified by manufacturer part number 23414, in the configuration and quantity stated by the title. Bars, springs, links, arms, bushings, brackets, joints, shocks, tools, lubricant, and mounting hardware are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Hotchkis\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHotchkis Sport Suspension develops sway bars, springs, chassis braces, control arms, end links, dampers, and related suspension components for street and performance vehicle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Hotchkis Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hotchkis\"\u003eShop all Hotchkis products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-67-70-ford-mustang-front-shock-mount-brackets\"\u003eHotchkis 67-70 Ford Mustang Front Shock Mount Brackets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-64-5-70-ford-mustang-subframe-connector-kit\"\u003eHotchkis 64.5-70 Ford Mustang Subframe Connector Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-67-70-ford-mustang-sport-swaybar-set\"\u003eHotchkis 67-70 Ford Mustang Sport Swaybar Set\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this Hotchkis shock or mount fit my suspension?\u003c\/strong\u003e\u003cbr\u003eMatch the verified vehicle application, axle position, mount style, ride-height range, and companion spring or suspension package before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this sold as one shock or as a pair?\u003c\/strong\u003e\u003cbr\u003eQuantity varies by exact part number. Use the product title and current package specification to confirm whether the listing includes one component, a pair, or a complete kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this component require an alignment?\u003c\/strong\u003e\u003cbr\u003eAn alignment is recommended when installation changes ride height, camber, caster, toe, or suspension mounting position. Follow the vehicle service procedure and current Hotchkis instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow current Hotchkis instructions and the vehicle service manual for part number 23414. Support the vehicle safely, preserve component orientation, use the specified lubricant and fasteners, torque every connection at the directed suspension position, confirm brake-line, tire, exhaust, and chassis clearance, test full suspension travel, align the vehicle when geometry changes, and recheck hardware after the initial drive.\u003c\/p\u003e","brand":"Hotchkis","offers":[{"title":"Default Title","offer_id":39671825367119,"sku":"HOT23414","price":168.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/hotchkis-hot23414-shock-mounts-camber-plates-image-01.jpg?v=1788699311"},{"product_id":"hotchkis-67-70-ford-mustang-front-shock-mount-brackets","title":"Hotchkis 67-70 Ford Mustang Front Shock Mount Brackets","description":"\u003cp\u003eThe Hotchkis 67-70 Ford Mustang Front Shock Mount Brackets is a shock mounts \u0026amp; camber plates for the normalized year, make, and model applications shown below. Match manufacturer part number 23415, year, make, model, chassis, axle position, suspension package, ride height, dimensions, and package contents before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe cut outs allow for easy access.\u003c\/li\u003e\n\u003cli\u003eOur shock mounts are laser cut and formed and welded in our own facility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1967-1970\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eConfirm chassis, suspension package, axle position, ride height, and every exact Hotchkis application note\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHotchkis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e23415\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eShock Mounts \u0026amp; Camber Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Type\u003c\/th\u003e\n\u003ctd\u003eSway Bar Mounting Brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle Specific\u003c\/th\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eOne kit or set as supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Hotchkis shock mounts \u0026amp; camber plates package identified by manufacturer part number 23415, in the configuration and quantity stated by the title. Bars, springs, links, arms, bushings, brackets, joints, shocks, tools, lubricant, and mounting hardware are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Hotchkis\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHotchkis Sport Suspension develops sway bars, springs, chassis braces, control arms, end links, dampers, and related suspension components for street and performance vehicle applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Hotchkis Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/hotchkis\"\u003eShop all Hotchkis products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-64-5-66-ford-mustang-front-shock-mount-brackets\"\u003eHotchkis 64.5-66 Ford Mustang Front Shock Mount Brackets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-64-5-70-ford-mustang-subframe-connector-kit\"\u003eHotchkis 64.5-70 Ford Mustang Subframe Connector Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/hotchkis-67-70-ford-mustang-sport-swaybar-set\"\u003eHotchkis 67-70 Ford Mustang Sport Swaybar Set\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this Hotchkis shock or mount fit my suspension?\u003c\/strong\u003e\u003cbr\u003eMatch the verified vehicle application, axle position, mount style, ride-height range, and companion spring or suspension package before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this sold as one shock or as a pair?\u003c\/strong\u003e\u003cbr\u003eQuantity varies by exact part number. Use the product title and current package specification to confirm whether the listing includes one component, a pair, or a complete kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this component require an alignment?\u003c\/strong\u003e\u003cbr\u003eAn alignment is recommended when installation changes ride height, camber, caster, toe, or suspension mounting position. Follow the vehicle service procedure and current Hotchkis instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow current Hotchkis instructions and the vehicle service manual for part number 23415. Support the vehicle safely, preserve component orientation, use the specified lubricant and fasteners, torque every connection at the directed suspension position, confirm brake-line, tire, exhaust, and chassis clearance, test full suspension travel, align the vehicle when geometry changes, and recheck hardware after the initial drive.\u003c\/p\u003e","brand":"Hotchkis","offers":[{"title":"Default Title","offer_id":39671825432655,"sku":"HOT23415","price":168.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/hotchkis-hot23415-shock-mounts-camber-plates-image-01.jpg?v=1788699311"},{"product_id":"ford-racing-2005-2010-mustang-gt-front-lower-control-arm-upgrade-kit","title":"Ford Racing 2005-2010 Mustang GT Front Lower Control Arm Upgrade Kit","description":"\u003cp\u003eElevate your Mustang GT's drive with our Front Lower Arm Kit, designed for superior handling and durability. Originally crafted for the Shelby GT500, this upgrade boasts robust ball joints for unmatched performance and reliability on the road.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlease Note: This control arm upgrade kit will ONLY fit 2010 Mustangs built on or before 08\/03\/2009.\u003c\/li\u003e\n\u003cli\u003eThese control arms are constructed from OEM-quality stamped steel for long-lasting use.\u003c\/li\u003e\n\u003cli\u003eThe original equipment on 2007, 2008, and 2009 Shelby GT500s, these Ford Performance Front Lower Control Arms will fit all 2005, 2006, 2007, 2008, 2009, and 2010 V6 and GT Mustangs as a direct fit upgrade.\u003c\/li\u003e\n\u003cli\u003eFord Performance Front Lower Control Arm Upgrade Kit for all 2005, 2006, 2007, 2008, 2009 and 2010 Mustangs.\u003c\/li\u003e\n\u003cli\u003eEach front lower control arm assembly features strong, low-friction, ball joints and a high-quality nylon bearing that drastically improves impact harshness.\u003c\/li\u003e\n\u003cli\u003eReplace the factory front lower control arms on your 2005-2010 V6 or GT Mustang and step up to Ford Performance's Front Lower Control Arm Upgrade Kit, featuring 2007-2009 Shelby GT500 OE front lower control arms for improved traction and handling!\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2005-2010\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eFits 2005-2010 Mustang GT built on or before 8\/3\/09 with 18mm ball joint shaft\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFord Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eM-3075-E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eControl Arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003esteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Ford Racing product identified by manufacturer part number M-3075-E. Additional fittings, fluids, hoses, wiring, tuning, tools, and hardware are included only when expressly stated for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Ford Racing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFord Racing, now known as Ford Performance, develops factory-engineered powertrain, chassis, suspension, braking, wheel, appearance, and vehicle accessory parts. Correct selection depends on the exact Ford Performance part number and every documented vehicle, engine, drivetrain, body, and factory-equipment requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Ford Racing Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/ford-racing\"\u003eShop all Ford Performance products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ford-racing-2015-2016-mustang-performance-pack-front-control-arm-kit\"\u003eFord Racing 2015-2016 Mustang Performance Pack Front Control Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ford-performance-18-21-mustang-performance-pack-2-front-splitter-kit\"\u003eFord Performance 18-21 Mustang Performance Pack 2 Front Splitter Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ford-performance-2011-2014-mustang-5-0l-cold-spark-plug-set\"\u003eFord Performance 2011-2014 Mustang 5.0L Cold Spark Plug Set\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Ford Racing M-3075-E fits?\u003c\/strong\u003e\u003cbr\u003eMatch every year, make, model, and application note in the fitment table. Confirm engine, drivetrain, body configuration, factory equipment, connectors, and any exclusions before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with Ford Racing M-3075-E?\u003c\/strong\u003e\u003cbr\u003eThe listing includes only the components stated in the What's Included section. Related fittings, wiring, fluids, tools, and supporting parts are not included unless expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installation require tuning or additional parts?\u003c\/strong\u003e\u003cbr\u003eRequirements vary by application. Confirm tuning, calibration, fluids, seals, fittings, wiring, specialty tools, and supporting modifications before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eVerify the exact application and inspect every included component before installation.\u003c\/li\u003e\n\u003cli\u003eFollow the current Ford Racing instructions for the exact part number, including all torque, sealing, wiring, fluid, clearance, priming, and calibration requirements.\u003c\/li\u003e\n\u003cli\u003eCheck for leaks, fault codes, abnormal operation, and loose connections after startup and again after the initial drive.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ford Racing","offers":[{"title":"Default Title","offer_id":39680271974479,"sku":"FRPM-3075-E","price":362.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/ford-racing-frpm-3075-e-control-arms-image-01.jpg?v=1788644668"},{"product_id":"ford-racing-2015-2016-mustang-performance-pack-front-control-arm-kit","title":"Ford Racing 2015-2016 Mustang Performance Pack Front Control Arm Kit","description":"\u003cp\u003eUpgrade your Mustang GT or EcoBoost with our Performance Pack Front Lower Control Arm Kit, featuring forged steel arms for unmatched stability. Experience precision handling and enhanced brake cooling with spherical bearings and built-in air deflectors on every drive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese front lower control arm kits enable the owners of Ford vehicles to upgrade them with low-friction ball joints and improved inner bushings.\u003c\/li\u003e\n\u003cli\u003eThey feature a higher quality nylon bearing that dramatically improves impact harshness, resulting in a better ride.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eFits 2015-2020 Mustang GT and 2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eFord Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eM-3075-F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eControl Arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Ford Racing product identified by manufacturer part number M-3075-F. Additional fittings, fluids, hoses, wiring, tuning, tools, and hardware are included only when expressly stated for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Ford Racing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFord Racing, now known as Ford Performance, develops factory-engineered powertrain, chassis, suspension, braking, wheel, appearance, and vehicle accessory parts. Correct selection depends on the exact Ford Performance part number and every documented vehicle, engine, drivetrain, body, and factory-equipment requirement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Ford Racing Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/ford-racing\"\u003eShop all Ford Performance products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ford-racing-2005-2010-mustang-gt-front-lower-control-arm-upgrade-kit\"\u003eFord Racing 2005-2010 Mustang GT Front Lower Control Arm Upgrade Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ford-performance-18-21-mustang-performance-pack-2-front-splitter-kit\"\u003eFord Performance 18-21 Mustang Performance Pack 2 Front Splitter Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ford-performance-2011-2014-mustang-5-0l-cold-spark-plug-set\"\u003eFord Performance 2011-2014 Mustang 5.0L Cold Spark Plug Set\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Ford Racing M-3075-F fits?\u003c\/strong\u003e\u003cbr\u003eMatch every year, make, model, and application note in the fitment table. Confirm engine, drivetrain, body configuration, factory equipment, connectors, and any exclusions before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with Ford Racing M-3075-F?\u003c\/strong\u003e\u003cbr\u003eThe listing includes only the components stated in the What's Included section. Related fittings, wiring, fluids, tools, and supporting parts are not included unless expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes installation require tuning or additional parts?\u003c\/strong\u003e\u003cbr\u003eRequirements vary by application. Confirm tuning, calibration, fluids, seals, fittings, wiring, specialty tools, and supporting modifications before installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eVerify the exact application and inspect every included component before installation.\u003c\/li\u003e\n\u003cli\u003eFollow the current Ford Racing instructions for the exact part number, including all torque, sealing, wiring, fluid, clearance, priming, and calibration requirements.\u003c\/li\u003e\n\u003cli\u003eCheck for leaks, fault codes, abnormal operation, and loose connections after startup and again after the initial drive.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ford Racing","offers":[{"title":"Default Title","offer_id":39680272007247,"sku":"FRPM-3075-F","price":300.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/ford-racing-frpm-3075-f-control-arms-image-01.jpg?v=1788644684"},{"product_id":"dodge-durango-adjustable-front-upper-control-arms","title":"Dodge Durango Adjustable Front Upper Control Arms 2011-2016","description":"\u003cdiv\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 300.2004\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eBlack Ops Auto Works Adjustable Front Upper Control Arms for 2011-2016 Dodge Durango\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eUpgrade your suspension geometry and handling with Black Ops Auto Works Adjustable Front Upper Control Arms for 2012+ Dodge Durango and 2012–2021 Jeep Grand Cherokee WK2. These precision CNC-machined billet aluminum arms eliminate factory bushing deflection and provide easy camber\/caster adjustment for lowered, lifted, or performance setups. Engineered using Finite Element Analysis (FEA) for superior strength, these arms deliver sharper handling, reduced tire wear, and reliable performance for street, track, or off-road use.\u003c\/p\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBlack Ops Auto Works\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAdjustable Front Upper Control Arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2011-2016 Dodge Durango \/ 2011–2016 Jeep Grand Cherokee WK2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushings\u003c\/td\u003e\n\u003ctd\u003eEnergy Suspension High-Durometer Polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eBlack Ops Auto Works Limited Lifetime Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhats Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePair of Adjustable Front Upper Control Arms\u003c\/li\u003e\n\u003cli\u003eEnergy Suspension Polyurethane Bushings (Pre-Installed)\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for lowered or performance-tuned vehicles to correct geometry and reduce bump steer\u003c\/li\u003e\n\u003cli\u003eApply included silicone lubricant to bushings during installation to prevent squeaking\u003c\/li\u003e\n\u003cli\u003ePair with rear adjustable arms for complete suspension tuning\u003c\/li\u003e\n\u003cli\u003eProfessional installation and alignment are strongly recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThis Part Fits\u003c\/h4\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011–2016\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eDurango\u003c\/td\u003e\n\u003ctd\u003eAll Trims (incl. SRT, Hellcat)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011–2016\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGrand Cherokee WK2\u003c\/td\u003e\n\u003ctd\u003eAll Trims (incl. SRT \/ Trackhawk)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhy Choose Black Ops Auto Works?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePioneers of adjustable control arms for modern Jeep and Dodge platforms\u003c\/li\u003e\n\u003cli\u003eBillet aluminum construction with FEA engineering for maximum strength\u003c\/li\u003e\n\u003cli\u003eEliminates factory deflection for sharper handling and reduced tire wear\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA with premium components and lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e How much adjustment do these arms provide?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Multiple tab offsets allow precise camber and caster corrections, ideal for lowered or lifted setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Will these fit my 2022 Dodge Durango SRT?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Yes. They are designed for all 2011+ Durango and 2011–2021 Grand Cherokee WK2 models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Is professional installation and alignment required?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Yes. A full professional alignment is essential after installation to set proper geometry and ensure safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ\u003c\/strong\u003e: Why don’t my arms fit in the oem location they seem bigger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA\u003c\/strong\u003e: These arms are adjustable so it is recommended to take them apart and put the left and right sections in first. Once those are in you can then put the center section in since it’s adjustable they are able to be opened and closed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ\u003c\/strong\u003e: Why don’t they fit the one space where they bolt in? \u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eA: \u003c\/b\u003eThey will be tight you can take a rubber mallet and tap them in if they are loose you will get a clunk sound. If the bolt don’t fit you may need to file the sleeve in the bushing as the cut during manufacturing can leave a burr blocking the bolt. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eShipping \u0026amp; Handling\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod:\u003c\/strong\u003e UPS Ground or FedEx Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e In stock – ships 3-5 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Secure custom foam protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Black Ops Auto Works","offers":[{"title":"Default Title","offer_id":40953802653775,"sku":"300.2004.D11","price":849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/black-ops-auto-works-300-2004-d11-control-arms-dodge-durango-a033f3b7-1000x1000.webp?v=1792723724"},{"product_id":"dodge-durango-adjustable-rear-control-arms-2011","title":"Dodge Durango Adjustable Rear Control Arms 2011+","description":"\u003cdiv\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 300.2001D\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eBlack Ops Auto Works Billet Adjustable Rear Upper Control Arms for 2011+ Dodge Durango\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eEnhance alignment control, reduce tire wear, and improve handling on your 2011+ Dodge Durango with Black Ops Auto Works Billet Adjustable Rear Upper Control Arms. These precision-engineered arms eliminate factory bushing deflection and axial loading issues while providing easy camber\/toe adjustment for lowered, lifted, or performance setups. CNC-machined from 6061-T6 billet aluminum with plated steel adjustment tabs and high-durometer polyurethane bushings, these arms are race-proven and optimized using Finite Element Analysis (FEA) by Stress Engineering for superior strength and reliability.\u003c\/p\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBlack Ops Auto Works\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBillet Adjustable Rear Upper Control Arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2011+ Dodge Durango (All Models)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Billet Aluminum with Plated Steel Tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushings\u003c\/td\u003e\n\u003ctd\u003e85 Durometer Polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eCamber\/Toe via Swappable Tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eBlack Ops Auto Works Limited Lifetime Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhats Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePair of Adjustable Rear Upper Control Arms\u003c\/li\u003e\n\u003cli\u003eHigh-Durometer Polyurethane Bushings (Pre-Installed)\u003c\/li\u003e\n\u003cli\u003eSilicone Lubricant\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for lowered or performance-tuned Durango models to correct geometry and eliminate bump steer\u003c\/li\u003e\n\u003cli\u003eApply included silicone lubricant to bushings during installation to prevent squeaking\u003c\/li\u003e\n\u003cli\u003ePair with front adjustable arms for complete suspension tuning\u003c\/li\u003e\n\u003cli\u003eProfessional installation and alignment are strongly recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThis Part Fits\u003c\/h4\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011–2026\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eDurango\u003c\/td\u003e\n\u003ctd\u003eAll Trims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhy Choose Black Ops Auto Works?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePioneers of adjustable control arms for modern Jeep and Dodge platforms\u003c\/li\u003e\n\u003cli\u003eBillet aluminum construction with FEA engineering for unmatched strength\u003c\/li\u003e\n\u003cli\u003eRace-proven tab design outperforms threaded alternatives\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA with premium components and lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e How much adjustment do these arms provide?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Multiple tab offsets allow for ±1.5°+ camber\/toe correction, ideal for lowered or lifted setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Will these fit my 2023 Dodge Durango SRT?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Yes. They are designed for all 2011+ Dodge Durango models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Is alignment required after installation?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Yes. A full professional alignment is essential to set proper camber and toe angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eShipping \u0026amp; Handling\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod:\u003c\/strong\u003e UPS Ground or FedEx Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e In stock – ships 3-5 business days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Secure custom foam protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou can purchase the 8oz tub directly from us \u003ca title=\"Energy Suspension 8oz Silicone Lubricant\" href=\"https:\/\/www.blackopsautoworks.com\/products\/energy-suspension-8oz-tub-of-lubricant\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDetailed installation notes (including torque specs, tips, and steps for our Jeep control arms\/suspension components) are available in this guide:\u003cbr\u003e\u003ca title=\"Jeep Suspension Arms Installation Notes\" href=\"https:\/\/drive.google.com\/file\/d\/1X0Vv8msFgBtUb12RLg4zZw45fPYMvws4\/view?usp=sharing\"\u003eClick Here for Installation Instructions (PDF)\u003c\/a\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Black Ops Auto Works","offers":[{"title":"Default Title","offer_id":39686706856015,"sku":"300.2001D","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/black-ops-auto-works-300-2001d-control-arms-dodge-durango-744ba272-1000x1000.webp?v=1792723724"},{"product_id":"dodge-durango-billet-rear-toe-links","title":"Dodge Durango Billet Rear Toe Links","description":"\u003cdiv\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 300.2002\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003e2011–2026 Dodge Durango Billet Aluminum Rear Toe Links\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eStrengthen the rear suspension of your 2011–2024 Dodge Durango with these premium Billet Aluminum Rear Toe Links. Made from high-strength T6061 billet aluminum and equipped with Energy Suspension polyurethane bushings, these links are engineered for racers and high-power builds where stock toe links commonly bend under hard acceleration. Lighter and significantly stronger than factory units, these toe links reduce flex, improve handling precision, and provide reliable performance under aggressive driving conditions.\u003c\/p\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable width=\"100%\" cellspacing=\"0\" cellpadding=\"8\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBlack Ops Auto Works\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBillet Aluminum Rear Toe Links\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle\u003c\/td\u003e\n\u003ctd\u003e2011–2026 Dodge Durango\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eT6061 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushings\u003c\/td\u003e\n\u003ctd\u003eEnergy Suspension Polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack Brite Dip Anodize\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eBlack Ops Auto Works Limited Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhats Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePair of Billet Aluminum Rear Toe Links\u003c\/li\u003e\n\u003cli\u003eEnergy Suspension Polyurethane Bushings\u003c\/li\u003e\n\u003cli\u003eE-Brake Cable Clips\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Notes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for 2011–2026 Dodge Durango models\u003c\/li\u003e\n\u003cli\u003eGreat upgrade for high-power, track, or aggressive street use\u003c\/li\u003e\n\u003cli\u003eProfessional installation and alignment are strongly recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThis Part Fits\u003c\/h4\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"8\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011–2026\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eDurango\u003c\/td\u003e\n\u003ctd\u003eAll Models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhy Choose Black Ops Auto Works?\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpecialist in premium performance parts for modern muscle and SUVs\u003c\/li\u003e\n\u003cli\u003eBillet aluminum components offer superior strength and weight savings\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA with attention to detail and durability\u003c\/li\u003e\n\u003cli\u003eTrusted by enthusiasts seeking reliable upgrades for high-power builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Will these toe links fit my 2018 Dodge Durango?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Yes. They are designed specifically for 2011–2026 Dodge Durango models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e How much lighter are these compared to stock?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Each side is approximately 0.5 lbs lighter than the factory toe links.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ:\u003c\/strong\u003e Is professional installation recommended?\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003e Yes. Professional installation and a proper alignment are critical for safety and handling performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eShipping \u0026amp; Handling\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethod:\u003c\/strong\u003e UPS Ground or FedEx Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailability:\u003c\/strong\u003e In stock – ships same or next business day\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e Secure custom foam protective packaging\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Black Ops Auto Works","offers":[{"title":"Default Title","offer_id":39725825130575,"sku":"300.2002","price":348.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/black-ops-auto-works-300-2002-control-arms-dodge-durango-c61ac96e-1000x1000.webp?v=1792723724"},{"product_id":"blox-racing-competition-front-camber-kit-1996-2000-honda-civic","title":"BLOX Racing Competition Front Camber Kit - 1996-2000 Honda Civic","description":"\u003cp\u003eBLOX Racing’s Competition adjustable front camber kits are designed to replace the vehicle’s factory upper control arms. BLOX Racing adjustable front camber kits allow the user to adjust and fine tune the front suspension’s camber settings for optimum driving and cornering performance. By properly adjusting the front camber settings, premature and uneven tire wear can be reduced while greater tire contact patch can be created. The BLOX Racing Competition front camber kit features its new sliding ball joint. With\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Camber Range: -0.5\u0026amp;deg. to -3.0\u0026amp;deg. per side for fine-tuned alignment on street or track setups.\u003c\/li\u003e\n\u003cli\u003eCNC Machined Construction: Billet 6061-T6 aluminum ensures lightweight strength and durability under high stress.\u003c\/li\u003e\n\u003cli\u003eStainless Steel Hardware: Includes bolts spacers and washers for secure fastening and rust prevention.\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Finish: Provides corrosion resistance and long-lasting appearance in harsh conditions.\u003c\/li\u003e\n\u003cli\u003eCNC machined from 6061-T6 billet aluminum with black anodizing and stainless steel hardware.\u003c\/li\u003e\n\u003cli\u003eBolts to OEM strut mounting locations no drilling or modification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1996-2000\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eCX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1996-2000\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eDX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1996-2000\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eEX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-2000\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eGX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1996-2000\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eHX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1996-2000\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eLX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2000\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eSi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eValue Package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eBLOX Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eBXSS-20209\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific, verify the complete application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new BLOX Racing product in the exact configuration identified by manufacturer part number BXSS-20209. Only components expressly stated for this exact part number are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout BLOX Racing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBLOX Racing develops performance intake, exhaust, fuel, engine, drivetrain, suspension, wheel-hardware, and interior components for street and competition applications. Selection remains exact-part-number and exact-application specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated BLOX Racing Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blox-racing-rear-camber-kit-1990-2001-acura-integra-1988-2000-honda-civic-crx-del-sol\"\u003eBLOX Racing Rear Camber Kit - 1990-2001 Acura Integra \/ 1988-2000 Honda Civic CRX Del Sol\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blox-racing-2012-2015-honda-civic-spherical-bearing-kit-9th-gen-civic-front-lca\"\u003eBLOX Racing 2012 - 2015 Honda Civic Spherical Bearing Kit - 9Th Gen Civic Front LCA\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blox-racing-front-lca-bearing-kit-black-02-05-honda-civic-ep3-06-honda-civic\"\u003eBLOX Racing Front LCA Bearing Kit Black - 02-05 Honda Civic EP3 06+ Honda Civic\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/blox-racing\"\u003eBLOX Racing collection\u003c\/a\u003e for related performance components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this fit my 1996-2000 Honda Civic CX?\u003c\/strong\u003e\u003cbr\u003eThat application is listed, but confirm the complete year, make, model, trim, transmission, factory equipment, dimensions, and every BLOX Racing fitment note before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include everything needed for installation?\u003c\/strong\u003e\u003cbr\u003eOnly the components expressly listed for this exact BLOX Racing part number are included. Gaskets, fluids, tuning, adapters, fasteners, wiring, tools, and companion parts may be required depending on the application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill an alignment be needed after installation?\u003c\/strong\u003e\u003cbr\u003eAn alignment is recommended whenever ride height or suspension geometry changes. Verify tire clearance, steering travel, fastener torque, and all adjustable settings after installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current BLOX Racing instructions and vehicle service information for this exact part number. Verify fitment and included components before disassembly, use the specified tools and torque values, check all clearances and connections, and inspect the installation before operation. Professional installation is recommended.\u003c\/p\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":39743342051407,"sku":"BLOBXSS-20209","price":141.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/blox-racing-competition-front-camber-kit-1996-2000-honda-civic-blox-racing.jpg?v=1768509484"},{"product_id":"eibach-pro-alignment-front-camber-kit-for-2016-toyota-tacoma","title":"Eibach Pro-Alignment Front Camber Kit for 2016+ Toyota Tacoma","description":"\u003cp\u003eEibach part EIB5.25470K is a component in the control arms category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Camber Bolts: +\/-1.75 degrees per side for exact alignment correction on lowered or lifted Tacomas.\u003c\/li\u003e\n\u003cli\u003eHigh-Strength Steel: Forged alloy steel construction resists corrosion with black oxide finish for long-term durability.\u003c\/li\u003e\n\u003cli\u003eBolt-On Design: Direct replacement for stock camber bolts, no drilling or modifications needed.\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM control arms; includes (2) 14mm camber bolts and nuts.\u003c\/li\u003e\n\u003cli\u003eHigh-tensile alloy steel with black oxide coating for rust resistance and strength up to 14mm diameter.\u003c\/li\u003e\n\u003cli\u003eTire Wear Reduction: Even contact patch prevents uneven wear, saving costs on replacement tires.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.25470K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eControl Arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach control arms in the exact configuration identified by part number EIB5.25470K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-22-25-ford-maverick-2-0l-ecoboost-awd-c2-rear-camber-arm-pro-alignment-kit\"\u003eEibach 22-25 Ford Maverick 2.0L EcoBoost AWD C2 Rear Camber Arm Pro-Alignment Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-camber-arm-kit-18-21-jeep-grand-cherokee\"\u003eEibach Alignment Camber Arm Kit 18+ Jeep Grand Cherokee\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-camber-arm-kit-for-09-14-chrysler-300-2wd-09-14-dodge-challenger\"\u003eEibach Pro-Alignment Camber Arm Kit for 09-14 Chrysler 300 2WD\/09-14 Dodge Challenger\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.25470K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.25470K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755431772239,"sku":"EIB5.25470K","price":870.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-25470k-control-arms-image-01.webp?v=1791839884"},{"product_id":"eibach-pro-alignment-camber-arm-kit-for-09-14-chrysler-300-2wd-09-14-dodge-challenger","title":"Eibach Pro-Alignment Camber Arm Kit for 09-14 Chrysler 300 2WD\/09-14 Dodge Challenger","description":"\u003cp\u003eEibach part EIB5.66045K is a component in the control arms category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy-Duty Steel Construction: Tubular steel arms with reinforced ends resist flex under high loads for long-lasting durability.\u003c\/li\u003e\n\u003cli\u003ePolyurethane Bushings: Maintenance-free bushings with grease zerks reduce deflection and allow easy servicing for consistent performance.\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation: Direct OEM replacement using factory mounting points—no cutting or welding required.\u003c\/li\u003e\n\u003cli\u003eHigh-strength tubular steel with polyurethane bushings and zinc plating for corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBolt-on with basic tools; wheel alignment required afterward to set camber\/caster precisely.\u003c\/li\u003e\n\u003cli\u003ePair with wheel alignment after installation to dial in specs for your setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.66045K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eControl Arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach control arms in the exact configuration identified by part number EIB5.66045K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-22-25-ford-maverick-2-0l-ecoboost-awd-c2-rear-camber-arm-pro-alignment-kit\"\u003eEibach 22-25 Ford Maverick 2.0L EcoBoost AWD C2 Rear Camber Arm Pro-Alignment Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-camber-arm-kit-18-21-jeep-grand-cherokee\"\u003eEibach Alignment Camber Arm Kit 18+ Jeep Grand Cherokee\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-front-camber-kit-for-2016-toyota-tacoma\"\u003eEibach Pro-Alignment Front Camber Kit for 2016+ Toyota Tacoma\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.66045K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.66045K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755433869391,"sku":"EIB5.66045K","price":586.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-66045k-control-arms-image-01.webp?v=1791839945"},{"product_id":"eibach-pro-alignment-camber-rear-kit-for-05-10-chrysler-300-300c-2wd-09-11-dodge-challenger","title":"Eibach Pro-Alignment Camber Rear Kit for 05-10 Chrysler 300\/300C 2WD \/ 09-11 Dodge Challenger","description":"\u003cp\u003eEibach part EIB5.66050K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Camber Range: ±1.75° per side for precise tuning after lowering.\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation: Replaces OEM camber bolts uses existing rear control arm points.\u003c\/li\u003e\n\u003cli\u003eComplete Kit: Includes left\/right eccentric bolts, nuts, and washers for both rear wheels.\u003c\/li\u003e\n\u003cli\u003ePrecision CAD\/CAM Engineered: Tested for OEM fit and maximum adjustability.\u003c\/li\u003e\n\u003cli\u003eHigh-Strength Forged Steel Construction: Aircraft-grade durability for street and track use.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement no drilling or modifications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.66050K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.66050K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.66050K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.66050K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755434590287,"sku":"EIB5.66050K","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-66050k-camber-kits-image-01.webp?v=1791839961"},{"product_id":"eibach-pro-alignment-rear-camber-kit-for-04-08-acura-tl","title":"Eibach Pro-Alignment Rear Camber Kit for 04-08 Acura TL","description":"\u003cp\u003eEibach part EIB5.67095K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBolt-On Design: Direct replacement for stock arms with no cutting or welding required for straightforward fitment.\u003c\/li\u003e\n\u003cli\u003eHigh-Strength Aluminum: CNC-machined billet aluminum construction resists flex under load for durable performance.\u003c\/li\u003e\n\u003cli\u003ePolyurethane Bushings: Included bushings reduce deflection and provide smooth articulation compared to OEM rubber.\u003c\/li\u003e\n\u003cli\u003eWide Adjustment Range: +4.0 to -2.0 degrees of rear camber adjustment allows precise setup for street or track use on lowered TL models.\u003c\/li\u003e\n\u003cli\u003eRequires basic hand tools and alignment after install; torque to Eibach specs (75 ft-lbs).\u003c\/li\u003e\n\u003cli\u003eBillet 6061-T6 aluminum with greaseable polyurethane bushings for strength and maintenance-free operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.67095K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.67095K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.67095K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.67095K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755435638863,"sku":"EIB5.67095K","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-67095k-camber-kits-image-01.webp?v=1791839920"},{"product_id":"eibach-pro-alignment-rear-kit-for-00-05-bmw-325i-6-92-4-99-325i-328i-6-cyl","title":"Eibach Pro-Alignment Rear Kit for 00-05 BMW 325i \/ 6\/92-4\/99 325i\/328i 6 cyl","description":"\u003cp\u003eEibach part EIB5.67110K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-Strength Steel: Forged alloy steel construction resists corrosion and withstands high cornering loads for long-term durability.\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On: Replaces OEM camber bolts with no modifications, maintaining suspension geometry and NVH levels.\u003c\/li\u003e\n\u003cli\u003eCamber Adjustment: Eccentric bolts provide ±1.75 degrees of rear camber correction per side to match lowered ride heights precisely.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty forged alloy steel with corrosion-resistant finish for street and track endurance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.67110K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.67110K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.67110K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.67110K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755435868239,"sku":"EIB5.67110K","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-67110k-camber-kits-image-01.webp?v=1791839905"},{"product_id":"eibach-pro-alignment-rear-camber-arm-kit-for-2018-honda-accord-1-5l-turbo","title":"Eibach Pro-Alignment Rear Camber Arm Kit for 2018+ Honda Accord 1.5L Turbo","description":"\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003eEibach part EIB5.67476K is a component in the camber kits category that requires exact application verification. Confirm the complete vehicle or engine, dimensions, interface, intended use, required supporting parts, and every manufacturer application note before ordering.\u003c\/p\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h4\u003e\u003cul style=\"margin: 12px 0 26px; padding-left: 24px; list-style-type: disc;\"\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eForged Aluminum Construction: Lightweight, high-strength arms resist flex and endure daily driving stresses.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eGreaseable Polyurethane Bushings: Reduce deflection, absorb vibrations, and maintain alignment over time.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eHex-Cast Aluminum Adjuster: Tool-free adjustments with lock-down feature for secure settings.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eBox dimensions: 18.5\" x 7\" x 3\"; net weight 5.6 lbs; ships via standard ground.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eBlack Anodized Finish: Corrosion-resistant coating protects against road salt, brake dust, and harsh weather.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eDirect bolt-on replacement for OEM rear lower control arms; no cutting or welding required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Status\u003c\/th\u003e\n\u003ctd\u003eFitment Verification Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired Verification\u003c\/th\u003e\n\u003ctd\u003eExact manufacturer part number and complete vehicle, engine, dimensional, and installation requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.67476K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eFitment verification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h4\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.67476K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/h4\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"margin: 12px 0 26px; padding-left: 24px; list-style-type: disc;\"\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h4\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.67476K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003eReview the current instructions for exact part number EIB5.67476K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755437572175,"sku":"EIB5.67476K","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-67476k-camber-kits-image-01.webp?v=1791839846"},{"product_id":"eibach-pro-alignment-rear-camber-arm-kit-for-11-16-scion-tc","title":"Eibach Pro-Alignment Rear Camber Arm Kit for 11-16 Scion tC","description":"\u003cp\u003eEibach part EIB5.67487K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjustable Camber Range: Fine-tune rear camber from -1.75° to +0.75° with laser-etched markings for exact settings during alignment.\u003c\/li\u003e\n\u003cli\u003eHigh-Strength Aluminum: CNC-machined from 6061-T6 billet aluminum to withstand high cornering loads without flexing.\u003c\/li\u003e\n\u003cli\u003eBolt-On Design: Direct replacement for stock arms with included hardware for straightforward installation.\u003c\/li\u003e\n\u003cli\u003eBlack Anodized Finish: Durable corrosion-resistant coating resists road salt, brake dust, and harsh conditions.\u003c\/li\u003e\n\u003cli\u003eRequires 19mm socket and torque wrench; alignment mandatory post-install.\u003c\/li\u003e\n\u003cli\u003eManufactured in Germany with tolerances under 0.01mm for perfect fit and function.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page and confirm the exact configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.67487K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.67487K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.67487K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.67487K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755437768783,"sku":"EIB5.67487K","price":472.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-67487k-camber-kits-image-01.webp?v=1791839899"},{"product_id":"eibach-pro-alignment-rear-camber-kit-for-09-acura-tl-tsx-08-honda-accord-3-5lv6-08-09-accord-2","title":"Eibach Pro-Alignment Rear Camber Kit for 09 Acura TL\/TSX \/ 08 Honda Accord 3.5LV6 \/ 08-09 Accord 2.","description":"\u003cp\u003eEibach part EIB5.67540K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-Strength Steel Construction: Forged from premium alloy steel for durability under high loads and repeated track use.\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On Fit: OEM-quality threading and dimensions ensure seamless installation without modifications.\u003c\/li\u003e\n\u003cli\u003eComplete Kit: Includes two adjustable camber bolts with washers for both rear wheels.\u003c\/li\u003e\n\u003cli\u003e±1.75° Camber Adjustment: Eccentric bolt design provides exact rear camber tuning from -1.75° to +1.75° for track or street setups.\u003c\/li\u003e\n\u003cli\u003ePerformance Handling Gains: Corrects excessive negative camber from lowered springs or coilovers for balanced grip and reduced inner tire wear.\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM hardware; torque bolts to 61 ft-lbs per Honda\/Acura specs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.67540K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.67540K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.67540K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.67540K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755438194767,"sku":"EIB5.67540K","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-67540k-camber-kits-image-01.webp?v=1791839885"},{"product_id":"eibach-pro-alignment-rear-camber-toe-kit-for-01-07-subaru-wrx","title":"Eibach Pro-Alignment Rear Camber\/Toe Kit for 01-07 Subaru WRX","description":"\u003cp\u003eEibach part EIB5.67640K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBolt-On Design: Direct OE replacement arms install using factory mounting points, no cutting or welding needed.\u003c\/li\u003e\n\u003cli\u003eHigh-Strength Construction: CNC-machined alloy steel arms with black powder coat finish resist corrosion and daily abuse.\u003c\/li\u003e\n\u003cli\u003eCamber Adjustment: +\/-1.5° range sets optimal negative camber for maximum tire contact in corners and reduced sidewall scrub.\u003c\/li\u003e\n\u003cli\u003eHigh-tensile strength alloy steel, precision machined and finished with durable black powder coating for rust protection.\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM rear control arm hardware and bushings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.67640K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.67640K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.67640K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.67640K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755438293071,"sku":"EIB5.67640K","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-67640k-camber-kits-image-01.webp?v=1791839869"},{"product_id":"eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby","title":"Eibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby","description":"\u003cp\u003eEibach part EIB5.72045K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-Strength Steel Construction: Forged 14mm diameter camber bolts withstand high stress and track abuse while maintaining accuracy.\u003c\/li\u003e\n\u003cli\u003eBolt-On Design: Direct replacement for stock bolts on S197 Mustang front lower control arms, no drilling or modifications needed.\u003c\/li\u003e\n\u003cli\u003eHigh-tensile forged steel with black oxide finish for corrosion resistance and strength up to 14mm diameter.\u003c\/li\u003e\n\u003cli\u003ePrecise Camber Adjustment: Provides up to ±1.75° front camber adjustment range using offset eccentric bolts for exact alignment tuning.\u003c\/li\u003e\n\u003cli\u003eExtended Tire Life: Proper alignment settings minimize uneven wear, ensuring longer tire longevity on street or track.\u003c\/li\u003e\n\u003cli\u003eRequires 4-wheel alignment post-installation; compatible with stock and aftermarket control arms.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.72045K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.72045K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-camber-kit-for-04-08-acura-tsx-03-07-honda-accord-coupe-06-07-accord-sedan\"\u003eEibach Pro-Alignment Camber Kit for 04-08 Acura TSX \/ 03-07 Honda Accord Coupe \/ 06-07 Accord Sedan\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.72045K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.72045K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755440554063,"sku":"EIB5.72045K","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-72045k-camber-kits-image-01.webp?v=1791839928"},{"product_id":"eibach-pro-alignment-rear-camber-toe-kit-for-03-08-nissan-350z-03-07-infiniti-g35-coupe-03-06","title":"Eibach Pro-Alignment Rear Camber \/ Toe Kit for 03-08 Nissan 350z \/ 03-07 Infiniti G35 Coupe \/ 03-06","description":"\u003cp\u003eEibach part EIB5.72050K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBillet Aluminum Construction: Lightweight, corrosion-resistant components ensure durability under high-stress racing conditions.\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On Fit: Replaces OEM rear upper links without fabrication, preserving suspension travel and ride quality.\u003c\/li\u003e\n\u003cli\u003eMade in USA: Precision CNC-machined from aircraft-grade materials for consistent performance and long-term reliability.\u003c\/li\u003e\n\u003cli\u003eRequires 4-post lift and alignment rack; torque to Eibach specs (85 ft-lbs).\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hardware; compatible with OEM and aftermarket shocks\/struts.\u003c\/li\u003e\n\u003cli\u003eYes, direct fit for all 2003-2007 G35 Coupe trims including Base, Sport and Journey; Sedan up to 2006.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.72050K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.72050K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.72050K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.72050K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755440586831,"sku":"EIB5.72050K","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-72050k-camber-kits-image-01.webp?v=1791839949"},{"product_id":"eibach-pro-alignment-rear-toe-only-adjustment-kit-for-03-08-nissan-350z-03-07-infiniti-g35-coupe","title":"Eibach Pro-Alignment Rear Toe Only Adjustment Kit for 03-08 Nissan 350z \/ 03-07 Infiniti G35 Coupe \/","description":"\u003cp\u003eEibach part EIB5.72055K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrecise Toe Adjustment: +\/- 1.75 degrees rear toe range corrects excessive inner tire wear from lowered ride height.\u003c\/li\u003e\n\u003cli\u003eAnodized Aluminum Construction: Lightweight, corrosion-resistant arms withstand track and street demands for long-term durability.\u003c\/li\u003e\n\u003cli\u003eBolt-On Design: Replaces OEM toe link with no cutting or welding required for straightforward alignment tuning.\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM and aftermarket rear subframes; torque to 70 ft-lbs.\u003c\/li\u003e\n\u003cli\u003eDirect-fit components tested on OEM chassis for consistent results.\u003c\/li\u003e\n\u003cli\u003eHigh-strength 6061-T6 aluminum with black anodized finish for corrosion resistance and reduced unsprung weight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.72055K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.72055K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.72055K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.72055K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755440947279,"sku":"EIB5.72055K","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-72055k-camber-kits-image-01.webp?v=1791839907"},{"product_id":"eibach-pro-alignment-front-camber-kit-for-07-08-infiniti-g35-sedan-infiniti-g37-sedan","title":"Eibach Pro-Alignment Front Camber Kit for 07-08 Infiniti G35 Sedan \/ Infiniti G37 Sedan","description":"\u003cp\u003eEibach part EIB5.72130K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBillet Aluminum Construction: Lightweight, high-strength components resist corrosion and ensure long-term durability.\u003c\/li\u003e\n\u003cli\u003eVehicle-Specific Engineering: Direct bolt-on fit for listed Infiniti G35\/G37 Sedan and Nissan 370Z without drilling or cutting.\u003c\/li\u003e\n\u003cli\u003eDoes not alter ride height or affect rear alignment.\u003c\/li\u003e\n\u003cli\u003ePrecision CNC-machined parts for OEM-level fitment.\u003c\/li\u003e\n\u003cli\u003eCNC-machined billet aluminum with anodized finish for strength and rust resistance.\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM struts and control arms; torque to factory specs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.72130K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.72130K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.72130K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.72130K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755442028623,"sku":"EIB5.72130K","price":844.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-72130k-camber-kits-image-01.webp?v=1791839892"},{"product_id":"eibach-pro-alignment-kit-for-07-11-ford-shelby-gt500-s197-5-4l-v8-05-11-mustang-conv-coupe-s197","title":"Eibach Pro-Alignment Kit for 07-11 Ford Shelby GT500\/S197 5.4L V8 \/ 05-11 Mustang Conv\/Coupe\/S197","description":"\u003cp\u003eEibach part EIB5.72345K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect Bolt-On Fit: Engineered for OEM rear lower control arm mounting points on S197 Mustang platforms, no modifications needed.\u003c\/li\u003e\n\u003cli\u003eGrade 10.9 Alloy Steel: High-tensile strength construction handles high cornering loads and daily driving stresses.\u003c\/li\u003e\n\u003cli\u003eComplete Kit Contents: Includes two camber bolts with washers for both rear sides, ready for immediate use.\u003c\/li\u003e\n\u003cli\u003e±1.75° Camber Adjustment: Eccentric rear camber bolts allow precise tuning to match lowered ride heights and suspension setups.\u003c\/li\u003e\n\u003cli\u003eIntended for vehicles lowered 1-2 inches or more; measure current alignment before install.\u003c\/li\u003e\n\u003cli\u003eReplace stock rear lower control arm-to-subframe bolts; torque to 129 ft-lbs (175 Nm) per Ford specs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.72345K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.72345K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.72345K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.72345K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755442618447,"sku":"EIB5.72345K","price":474.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-72345k-camber-kits-image-01.webp?v=1791839831"},{"product_id":"eibach-pro-alignment-rear-camber-kit-for-95-96-dodge-neon-03-06-neon-srt-4-9-97-10-99-hyundai-ac","title":"Eibach Pro-Alignment Rear Camber Kit for 95-96 Dodge Neon \/ 03-06 Neon SRT-4 \/ 9\/97-10\/99 Hyundai Ac","description":"\u003cp\u003eEibach part EIB5.81250K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-Strength Steel Construction: Cold-forged SAE-grade steel bolts with zinc plating resist corrosion and handle high loads.\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation: Uses existing suspension mounting points—no drilling, cutting or welding required.\u003c\/li\u003e\n\u003cli\u003ePrecision Engineering: CNC-machined eccentric design for exact adjustments, tested for OE-quality fit.\u003c\/li\u003e\n\u003cli\u003eMulti-Vehicle Compatibility: Direct fit for Neon, VW, Chevy, Saab, Mazda, Nissan and more listed models.\u003c\/li\u003e\n\u003cli\u003e±1.75° Camber Adjustment: Corrects excessive negative camber from lowered setups for full tire contact, reducing uneven wear and improving grip.\u003c\/li\u003e\n\u003cli\u003eAdjust camber after install using alignment rack; torque bolts to 70-90 ft-lbs per vehicle spec.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.81250K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.81250K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.81250K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.81250K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755442880591,"sku":"EIB5.81250K","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-81250k-camber-kits-image-01.webp?v=1791839885"},{"product_id":"eibach-pro-alignment-front-or-rear-camber-bolts-for-01-08-wrx-04-07-scion-xa-front-only-04-06-sci","title":"Eibach Pro-Alignment Front or Rear Camber bolts for 01-08 WRX \/ 04-07 Scion xA Front Only\/ 04-06 Sci","description":"\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003eEibach part EIB5.81260K is a component in the camber kits category that requires exact application verification. Confirm the complete vehicle or engine, dimensions, interface, intended use, required supporting parts, and every manufacturer application note before ordering.\u003c\/p\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h4\u003e\u003cul style=\"margin: 12px 0 26px; padding-left: 24px; list-style-type: disc;\"\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eHigh-Strength Steel Build: Forged steel bolts withstand daily driving stresses and high-g cornering without bending or stripping.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eComplete Kit Contents: Includes 2 camber bolts, washers, and nuts for one axle (front or rear); order quantity as needed for full vehicle.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eZinc-Plated Finish: Resists rust and corrosion for long-lasting performance in all weather conditions.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eOE Direct Replacement: Bolts into factory locations with no modifications, using existing strut or control arm holes.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eExact tolerances ensure bolt-on fit and repeatable alignment adjustments.\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003eHigh-strength alloy steel bolts with zinc plating for superior corrosion resistance and OEM-grade durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Status\u003c\/th\u003e\n\u003ctd\u003eFitment Verification Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRequired Verification\u003c\/th\u003e\n\u003ctd\u003eExact manufacturer part number and complete vehicle, engine, dimensional, and installation requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.81260K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eFitment verification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h4\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.81260K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/h4\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul style=\"margin: 12px 0 26px; padding-left: 24px; list-style-type: disc;\"\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli style=\"margin: 0 0 10px; line-height: 1.65;\"\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003ch4 style=\"margin: 30px 0 12px; line-height: 1.35;\"\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h4\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.81260K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp style=\"margin: 0 0 18px; line-height: 1.65;\"\u003eReview the current instructions for exact part number EIB5.81260K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755443109967,"sku":"EIB5.81260K","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-81260k-camber-kits-image-01.webp?v=1791839871"},{"product_id":"eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2","title":"Eibach Pro-Alignment  for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/","description":"\u003cp\u003eEibach part EIB5.81270K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-Strength Steel Construction: Forged from premium alloy steel for durability under high loads and daily driving.\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On Fit: Replaces stock camber bolts with no modifications on compatible vehicles.\u003c\/li\u003e\n\u003cli\u003eBlack Oxide Finish: Provides corrosion resistance and smooth operation in all weather conditions.\u003c\/li\u003e\n\u003cli\u003ePerformance Handling: Optimizes tire contact patch for sharper turns and reduced understeer.\u003c\/li\u003e\n\u003cli\u003eHigh-strength alloy steel with black oxide coating for strength and rust protection.\u003c\/li\u003e\n\u003cli\u003eRequires professional wheel alignment after installation for best results.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.81270K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.81270K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-camber-kit-for-04-08-acura-tsx-03-07-honda-accord-coupe-06-07-accord-sedan\"\u003eEibach Pro-Alignment Camber Kit for 04-08 Acura TSX \/ 03-07 Honda Accord Coupe \/ 06-07 Accord Sedan\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.81270K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.81270K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755443339343,"sku":"EIB5.81270K","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-81270k-camber-kits-image-01.webp?v=1791839854"},{"product_id":"eibach-pro-alignment-front-kit-for-06-08-eclipse-02-05-civic-02-06-civic-cr-v-02-04-rsx","title":"Eibach Pro-Alignment Front Kit for 06-08 Eclipse \/ 02-05 Civic \/ 02-06 Civic CR-V \/ 02-04 RSX","description":"\u003cp\u003eEibach part EIB5.81280K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-Strength Steel Build: Heavy-duty construction with black oxide finish resists corrosion and handles daily driving plus autocross demands.\u003c\/li\u003e\n\u003cli\u003eBolt-On Installation: No drilling or modification needed; installs in under 1 hour per side with basic tools.\u003c\/li\u003e\n\u003cli\u003eCamber Adjustment Range: Up to ±1.75 degrees negative for track or street setups, preventing inner tire wear on lowered vehicles.\u003c\/li\u003e\n\u003cli\u003eVehicle-Specific Engineering: Custom plates and eccentric bolts match OEM mounting points for 02-05 Civic Si, 02-04 RSX Type-S, 06-12 Eclipse GT and more.\u003c\/li\u003e\n\u003cli\u003ePerformance Proven: Tested on road courses, reduces understeer and stabilizes handling at high speeds.\u003c\/li\u003e\n\u003cli\u003eCNC-machined high-strength steel with black oxide coating for rust resistance and OEM-like appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.81280K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.81280K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.81280K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.81280K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755443535951,"sku":"EIB5.81280K","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-81280k-camber-kits-image-01.webp?v=1791839916"},{"product_id":"eibach-pro-alignment-front-kit-for-05-10-scion-tc-08-10-scion-xb-92-96-lexus-es-300","title":"Eibach Pro-Alignment Front Kit for 05-10 Scion tC \/ 08-10 Scion xB \/ 92-96 Lexus ES 300 \/","description":"\u003cp\u003eEibach part EIB5.81290K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eToe Adjustment: Includes adjustable toe bolts for precise alignment, improving straight-line stability and reducing scrub.\u003c\/li\u003e\n\u003cli\u003eCNC-Machined Aluminum: Lightweight, durable black anodized components resist corrosion and maintain shape under load.\u003c\/li\u003e\n\u003cli\u003eBolt-On Design: Direct fit with no fabrication; hardware included for quick install on compatible OEM knuckles.\u003c\/li\u003e\n\u003cli\u003eCamber Adjustment: Full range of -1.75° to +1.75° per side to counteract negative camber from lowered setups, ensuring even tire contact.\u003c\/li\u003e\n\u003cli\u003ePerformance Gains: Enhances grip, handling, and tire longevity on Camry, tC, and similar platforms after suspension changes.\u003c\/li\u003e\n\u003cli\u003eHigh-strength CNC-machined billet aluminum with black anodized finish for corrosion resistance and strength.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.81290K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.81290K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.81290K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.81290K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755443765327,"sku":"EIB5.81290K","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-81290k-camber-kits-image-01.webp?v=1791839935"},{"product_id":"eibach-pro-alignment-ez-camber-bolt-pair-12-subaru-brz-frs","title":"Eibach Pro-Alignment EZ Camber Bolt Pair 12+ Subaru BRZ\/FRS","description":"\u003cp\u003eEibach part EIB5.81305K is a component in the camber kits category for the vehicle applications listed in the fitment tool. Confirm the complete vehicle configuration, product dimensions, mounting points, finish, quantity, and every application-specific requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e14mm Bolt Diameter: Matches OEM specs for direct replacement and secure fit in front strut-to-knuckle mounts.\u003c\/li\u003e\n\u003cli\u003eHigh-Tensile Steel Construction: Engineered for strength and durability under high-performance driving conditions.\u003c\/li\u003e\n\u003cli\u003e±1.75° Camber Adjustment: Provides extensive range for lowered vehicles, ensuring even tire contact and improved cornering grip.\u003c\/li\u003e\n\u003cli\u003eEZ Alignment Design: Eccentric head allows quick, tool-free adjustments during alignment without removing components.\u003c\/li\u003e\n\u003cli\u003eHigh-tensile alloy steel with corrosion-resistant coating for long-term durability.\u003c\/li\u003e\n\u003cli\u003eDesigned for use after coilover or spring installation to correct excessive negative camber.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cp\u003eUse the vehicle fitment table on this page. Confirm the exact trim, engine, drivetrain and factory suspension requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEibach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eEIB5.81305K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eExact finish, size, quantity, and application shown in this listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Eibach camber kits in the exact configuration identified by part number EIB5.81305K. Hardware, gaskets, fittings, wiring, fluids, tuning, and accessories are included only when expressly listed for this part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Eibach\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEibach develops vehicle-specific and dimension-specific springs, dampers, sway bars, coilovers, alignment components, and suspension packages for street, off-road, towing, and motorsport applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eibach Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-15-17-ford-mustang-gt-s550-coupe-camber-arm-kit\"\u003eEibach 15-17 Ford Mustang GT S550 Coupe Camber Arm Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-alignment-kit-for-05-10-ford-mustang-s197-11-mustang-3-7l-11-mustang-5-0l-07-11-shelby\"\u003eEibach Alignment Kit for 05-10 Ford Mustang S197 \/ 11 Mustang 3.7L \/ 11 Mustang 5.0L \/ 07-11 Shelby\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/eibach-pro-alignment-for-08-10-scion-xd-front-only-rear-only-for-92-03-toyota-camry-91-95-mr2\"\u003eEibach Pro-Alignment for 08-10 Scion xD Front Only \/ Rear Only for 92-03 Toyota Camry \/ 91-95 MR2 \/\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/eibach\"\u003eEibach collection\u003c\/a\u003e for related components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Eibach EIB5.81305K fits my vehicle or coilover?\u003c\/strong\u003e\u003cbr\u003eMatch the exact year, make, model, trim, drivetrain, axle position, suspension package, spring dimensions, spring rate, damper type, and manufacturer part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the listed ride-height change be identical on every vehicle?\u003c\/strong\u003e\u003cbr\u003eNo. Actual ride height varies with vehicle equipment, curb weight, existing wear, wheel and tire setup, installed accessories, and measurement method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked after suspension installation?\u003c\/strong\u003e\u003cbr\u003eVerify fastener torque at the specified suspension position, spring seating, brake-line and sensor routing, bump and droop travel, wheel clearance, alignment, headlamp aim, and safe road behavior.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eReview the current instructions for exact part number EIB5.81305K, compare every component and mounting point before disassembly, use the specified tools and torque procedures, and verify safe operation before normal use. Professional installation is recommended when product or vehicle requirements call for it.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":39755443798095,"sku":"EIB5.81305K","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eibach-5-81305k-camber-kits-image-01.webp?v=1791839894"},{"product_id":"belltech-alignment-kit-99-08-gm-total-alignment-kit","title":"Belltech ALIGNMENT KIT 99-08 GM TOTAL ALIGNMENT KIT","description":"\u003cp\u003eThis Belltech alignment kits is engineered for the verified 1999-2018 Chevrolet Silverado 1500 2WD and 4WD application listed below. It is selected by exact manufacturer part number 4957, so confirm every fitment note, suspension configuration, ride-height requirement, and included component before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBelltech front end alignment kit options include new cam eccentrics or offset control arm bushings that both offer an increased range of adjustment (typically up to 2 degrees) above and beyond what is offered from the factory.\u003c\/li\u003e\n\u003cli\u003eBelltech front end alignment kits provide you the application specific solution for all your alignment needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2018\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003e2WD and 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2018\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003e2WD and 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2020\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2020\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eBelltech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e4957\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAlignment Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific, verify the complete application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Belltech product identified by manufacturer part number 4957. Mounts, isolators, fasteners, alignment parts, bump stops, tools, and companion components are included only when expressly stated for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Belltech\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBelltech develops lowering, lifting, shock, strut, coilover, spring, sway-bar, spindle, and related suspension products for trucks, SUVs, and performance vehicles. Product selection remains exact-application and exact-part-number specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Belltech Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belltech-alignment-kit-99-08-truck-suv-1-deg-cams\"\u003eBelltech ALIGNMENT KIT 99-08 TRUCK\/SUV 1-DEG CAMS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belltech-alignment-kit-88-98-gm-1500-2500-3500\"\u003eBelltech ALIGNMENT KIT 88-98 GM 1500\/2500\/3500\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/belltech-alignment-kit-97-03-f150-expedition\"\u003eBelltech ALIGNMENT KIT 97-03 F150\/EXPEDITION\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/collections\/belltech\"\u003eBelltech collection\u003c\/a\u003e for related suspension components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this Belltech part fit my 1999-2018 Chevrolet Silverado 1500 2WD and 4WD?\u003c\/strong\u003e\u003cbr\u003eThat application is listed, but confirm the drivetrain, cab or body style, bed length, factory suspension, production split, current ride height, and every Belltech application note before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill I need an alignment after installation?\u003c\/strong\u003e\u003cbr\u003eAn alignment is recommended whenever ride height or suspension geometry changes. Verify tire clearance, steering travel, brake-line routing, headlight aim, and all fastener torque after the work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this include every part needed for installation?\u003c\/strong\u003e\u003cbr\u003eOnly parts expressly stated for this exact manufacturer part number are included. Reuse or replacement of mounts, isolators, hardware, alignment parts, bump stops, and related components depends on the application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current Belltech instructions and vehicle service information for this exact part number. Support the vehicle safely, use the specified tools and torque values, inspect all mounts and hardware, verify brake-line and tire clearance, settle the suspension, and complete an alignment when geometry or ride height changes. Professional installation is recommended.\u003c\/p\u003e","brand":"Belltech","offers":[{"title":"Default Title","offer_id":39831529685071,"sku":"BEL4957","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/belltech-bel4957-product-image-01-3284167759.jpg?v=1790716878"},{"product_id":"whiteline-91-94-nissan-sentra-b13-95-99-nissan-sentra-b14-front-caster-adj-kit-control-arm","title":"Whiteline 91-94 Nissan Sentra B13 \/ 95-99 Nissan Sentra B14 Front Caster adj kit - control arm","description":"\u003cp\u003eWhiteline 91-94 Nissan Sentra B13 \/ 95-99 Nissan Sentra B14 Front Caster adj kit - control arm is the exact Whiteline caster kits identified by manufacturer part number KCA303. Match the part number, vehicle application, mounting position, dimensions, and suspension configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstallation Difficulty: Difficult Installation Time (hrs): 2.5 Kit Contents: 2 Bushings Website Position: Front Wheel Alignment Required: Yes.\u003c\/li\u003e\n\u003cli\u003eSupplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.\u003c\/li\u003e\n\u003cli\u003eINFINITI, Nissan Alignment Caster Kit - Front - Whiteline KCA303 \/ 09319924325368 Control Arm Lower - Inner Rear Bushing Kit-Double Offset Whiteline Control arm - lower inner rear bushing.\u003c\/li\u003e\n\u003cli\u003eWhiteline caster kits are designed to improve cornering grip and vehicle straight line stability through increased static caster and dynamic negative camber gain.\u003c\/li\u003e\n\u003cli\u003eIn addition, synthetic elastomer bushings provide improved steering feedback and braking performance.\u003c\/li\u003e\n\u003cli\u003eEngineered to alter\/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response \u0026amp; increase directional stability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVerified catalog applications: 1991-1996 Infiniti G20, 1993-1998 Nissan Altima, 1995-1999 Nissan Maxima, 1991-1993 Nissan NX, 1991-1999 Nissan Sentra. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1991-1996\u003c\/td\u003e\n\u003ctd\u003eInfiniti\u003c\/td\u003e\n\u003ctd\u003eG20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-1998\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eAltima\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1995-1999\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eMaxima\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1991-1993\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1991-1999\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eSentra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eWhiteline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eKCA303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eWHLKCA303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e9319924325368\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCaster Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalog Status\u003c\/th\u003e\n\u003ctd\u003eManufacturer Catalog Verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Whiteline caster kits identified by manufacturer part number KCA303, plus only the hardware expressly supplied by Whiteline for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Whiteline\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhiteline develops suspension components for street and performance applications, including sway bars, bushings, links, control arms, springs, and alignment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Whiteline Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/whiteline\"\u003eShop all Whiteline products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-02-07-subaru-wrx-sedan-and-wagon-03-07-subaru-impreza-non-turbo-04-07-subaru-sti-94\"\u003eWhiteline 02-07 Subaru WRX Sedan and Wagon \/ 03-07 Subaru Impreza Non-Turbo \/ 04-07 Subaru STi \/ 93-\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-06-15-mazda-mx-5-miata-dual-offset-caster-bushings\"\u003eWhiteline 06-15 Mazda MX-5 Miata Dual-Offset Caster Bushings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-09-ford-fiesta-09-mazda-2de-front-caster-correction-c-a-l-i-rear-bushing\"\u003eWhiteline 09+ Ford Fiesta \/ 09+ Mazda 2DE Front Caster Correction C\/A L\/I Rear Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Whiteline KCA303 fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eVerified catalog applications: 1991-1996 Infiniti G20, 1993-1998 Nissan Altima, 1995-1999 Nissan Maxima, 1991-1993 Nissan NX, 1991-1999 Nissan Sentra. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I verify before ordering?\u003c\/strong\u003e\u003cbr\u003eVerify the exact part number, year, make, model, suspension configuration, mounting position, dimensions, factory equipment, and manufacturer exclusions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe package contains only the Whiteline components and hardware specified for part number KCA303. Related service parts and tools are sold separately unless expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow Whiteline's current instructions for part number KCA303. Support the vehicle safely, test-fit every component, torque fasteners at the specified suspension position, and complete an alignment when the procedure requires it.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":39854723006543,"sku":"WHLKCA303","price":38.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/whiteline-91-94-nissan-sentra-b13-95-99-nissan-sentra-b14-front-caster-adj-kit-control-arm-caster-kits-whiteline.jpg?v=1723318085"},{"product_id":"whiteline-9-98-8-09-subaru-legacy-liberty-rear-toe-lock-bolt-kit","title":"Whiteline 9\/98-8\/09 Subaru Legacy\/Liberty Rear Toe Lock Bolt Kit","description":"\u003cp\u003eWhiteline 9\/98-8\/09 Subaru Legacy\/Liberty Rear Toe Lock Bolt Kit is the exact Whiteline alignment kits identified by manufacturer part number KCA307. Match the part number, vehicle application, mounting position, dimensions, and suspension configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstallation Difficulty: Moderate Installation Time (hrs): 2 Kit Contents: 2 Bolts, 4 Washers, 2 Nuts Website Position: Rear Wheel Alignment Required: Yes.\u003c\/li\u003e\n\u003cli\u003eLocks OEM toe adjustment - suits KTA124 and aftermarket adjustable arms.\u003c\/li\u003e\n\u003cli\u003eSubaru Suspension Control Arm Bolt Kit - Rear - Whiteline KCA307 \/ 09319924244249 Control Arm - Lock Bolt Kit Whiteline Control arm - lock bolt kit.\u003c\/li\u003e\n\u003cli\u003eProtective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.\u003c\/li\u003e\n\u003cli\u003eFeaturing anti geometry that works to aid traction by allowing the wheel to track the ground more precisely resulting in superior traction under power including cornering and dramatically reducing understeer and front wheel spin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVerified catalog applications: 1998-2009 Subaru Legacy, 2000-2009 Subaru Outback. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-2009\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eLegacy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2009\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eOutback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eWhiteline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eKCA307\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eWHLKCA307\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e9319924244249\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAlignment Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalog Status\u003c\/th\u003e\n\u003ctd\u003eManufacturer Catalog Verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Whiteline alignment kits identified by manufacturer part number KCA307, plus only the hardware expressly supplied by Whiteline for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Whiteline\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhiteline develops suspension components for street and performance applications, including sway bars, bushings, links, control arms, springs, and alignment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Whiteline Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/whiteline\"\u003eShop all Whiteline products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-02-07-subaru-wrx-sedan-and-wagon-03-07-subaru-impreza-non-turbo-04-07-subaru-sti-95\"\u003eWhiteline 02-07 Subaru WRX Sedan and Wagon \/ 03-07 Subaru Impreza Non-Turbo \/ 04-07 Subaru STi \/ 93-\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-sway-bar-aluminum-15-16mm-lateral-lock-kits\"\u003eWhiteline Sway Bar Aluminum 15-16mm Lateral Lock Kits\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-sway-bar-aluminum-17-18mm-lateral-lock-kits\"\u003eWhiteline Sway Bar Aluminum 17-18mm Lateral Lock Kits\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Whiteline KCA307 fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eVerified catalog applications: 1998-2009 Subaru Legacy, 2000-2009 Subaru Outback. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I verify before ordering?\u003c\/strong\u003e\u003cbr\u003eVerify the exact part number, year, make, model, suspension configuration, mounting position, dimensions, factory equipment, and manufacturer exclusions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe package contains only the Whiteline components and hardware specified for part number KCA307. Related service parts and tools are sold separately unless expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow Whiteline's current instructions for part number KCA307. Support the vehicle safely, test-fit every component, torque fasteners at the specified suspension position, and complete an alignment when the procedure requires it.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":39854723072079,"sku":"WHLKCA307","price":59.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/whiteline-998-809-subaru-legacyliberty-rear-toe-lock-bolt-kit-alignment-kits-whiteline-4.jpg?v=1792533770"},{"product_id":"whiteline-08-09-subaru-sti-12-brz-12-scion-fr-s-rear-camber-adj-kit-control-arm-upper-bushes","title":"Whiteline 08-09 Subaru STi\/12+ BRZ \/ 12+ Scion FR-S Rear Camber adj kit-control arm upper bushes","description":"\u003cp\u003eWhiteline 08-09 Subaru STi\/12+ BRZ \/ 12+ Scion FR-S Rear Camber adj kit-control arm upper bushes is the exact Whiteline camber kits identified by manufacturer part number KCA326. Match the part number, vehicle application, mounting position, dimensions, and suspension configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhiteline adjustable camber kits provide the ability to fine tune camber settings for optimum tire contact resulting in improved vehicle handling and increased tire life.\u003c\/li\u003e\n\u003cli\u003eThe kit includes low compliance synthetic elastomer bushings which help maintain preferred alignment settings as well as providing enhanced steering response.\u003c\/li\u003e\n\u003cli\u003eSupplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.\u003c\/li\u003e\n\u003cli\u003eScion, Subaru, Toyota Suspension Control Arm Bushing - Rear Upper Inner - Whiteline KCA326 \/ 09319924358847 Control Arm Upper - Inner Bushing Kit-Double Offset Whiteline Control arm - upper inner bushing.\u003c\/li\u003e\n\u003cli\u003eInternal grease reservoirs provide continual self lubrication for optimum friction management.\u003c\/li\u003e\n\u003cli\u003eProtective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVerified catalog applications: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ, 2022-2024 Subaru BRZ, 2008-2018 Subaru Forester, 2008-2017 Subaru Impreza, 2010-2019 Subaru Legacy, 2015-2019 Subaru Outback, 2015-2025 Subaru WRX, 2015-2021 Subaru WRX STI, 2013-2015 Subaru XV Crosstrek, 2017-2020 Toyota 86, 2022-2024 Toyota GR86. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2016\u003c\/td\u003e\n\u003ctd\u003eScion\u003c\/td\u003e\n\u003ctd\u003eFR-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eBRZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2024\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eBRZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2018\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eForester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2017\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eImpreza\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eLegacy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2019\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eOutback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2025\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX STI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2015\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eXV Crosstrek\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2024\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eGR86\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eWhiteline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eKCA326\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eWHLKCA326\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e9319924358847\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalog Status\u003c\/th\u003e\n\u003ctd\u003eManufacturer Catalog Verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Whiteline camber kits identified by manufacturer part number KCA326, plus only the hardware expressly supplied by Whiteline for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Whiteline\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhiteline develops suspension components for street and performance applications, including sway bars, bushings, links, control arms, springs, and alignment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Whiteline Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/whiteline\"\u003eShop all Whiteline products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-01-05-honda-civic-02-06-acura-rsx-type-s-12-subaru-brz-front-camber-adj-bolt-kit-16m\"\u003eWhiteline 01-05 Honda Civic \/ 02-06 Acura RSX Type S \/ 12+ Subaru BRZ Front Camber Adj Bolt Kit-16m\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-01-05-honda-civic-es-eu-02-06-acura-rsx-type-s-dc5-rear-camber-adj-kit-uppr-c-arm\"\u003eWhiteline 01-05 Honda Civic ES \u0026amp; EU \/ 02-06 Acura RSX Type S DC5 Rear Camber adj kit - uppr c\/arm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-02-07-wrx-f-r-03-07-impreza-na-f-r-04-07-sti-f-r-08-wrx-hatch-f-only-08-09-sti\"\u003eWhiteline 02-07 WRX F\u0026amp;R \/ 03-07 Impreza NA F\u0026amp;R \/ 04-07 STi F\u0026amp;R \/ 08+ WRX Hatch F Only \/ 08-09 STi\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Whiteline KCA326 fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eVerified catalog applications: 2013-2016 Scion FR-S, 2013-2020 Subaru BRZ, 2022-2024 Subaru BRZ, 2008-2018 Subaru Forester, 2008-2017 Subaru Impreza, 2010-2019 Subaru Legacy, 2015-2019 Subaru Outback, 2015-2025 Subaru WRX, 2015-2021 Subaru WRX STI, 2013-2015 Subaru XV Crosstrek, 2017-2020 Toyota 86, 2022-2024 Toyota GR86. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I verify before ordering?\u003c\/strong\u003e\u003cbr\u003eVerify the exact part number, year, make, model, suspension configuration, mounting position, dimensions, factory equipment, and manufacturer exclusions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe package contains only the Whiteline components and hardware specified for part number KCA326. Related service parts and tools are sold separately unless expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow Whiteline's current instructions for part number KCA326. Support the vehicle safely, test-fit every component, torque fasteners at the specified suspension position, and complete an alignment when the procedure requires it.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":39854725070927,"sku":"WHLKCA326","price":196.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/whiteline-08-09-subaru-sti12-brz-12-scion-fr-s-rear-camber-adj-kit-control-arm-upper-bushes-camber-kits-whiteline-5.jpg?v=1739394930"},{"product_id":"whiteline-04-07-subaru-wrx-sti-98-02-subaru-forester-front-upper-strut-mounts-offset-assembly","title":"Whiteline 04-07 Subaru WRX\/STi \/ 98-02 Subaru Forester Front Upper Strut Mounts - Offset Assembly","description":"\u003cp\u003eWhiteline 04-07 Subaru WRX\/STi \/ 98-02 Subaru Forester Front Upper Strut Mounts - Offset Assembly is the exact Whiteline shock mounts \u0026amp; camber plates identified by manufacturer part number KCA335. Match the part number, vehicle application, mounting position, dimensions, and suspension configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstallation Difficulty: Moderate Installation Time (hrs): 2 Kit Contents: 2 Strut Mounts Website Position: Front Wheel Alignment Required: Yes.\u003c\/li\u003e\n\u003cli\u003eSaab, Subaru Alignment Caster \/ Camber Kit - Front - Whiteline KCA335 \/ 09319924243266 Strut Mount - Kit Whiteline Strut mount.\u003c\/li\u003e\n\u003cli\u003eWhiteline offset strut mounts allow for adjustments of either caster or camber depending on driver requirements.\u003c\/li\u003e\n\u003cli\u003eManufactured from low compliance rubber and twin shielded bearing design, this strut top allows for gains in caster or camber depending on vehicle.\u003c\/li\u003e\n\u003cli\u003eEngineered to alter\/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response \u0026amp; increase directional stability.\u003c\/li\u003e\n\u003cli\u003eProtective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVerified catalog applications: 2005-2006 Saab 9-2X, 2013 Scion FR-S, 2013 Subaru BRZ, 1998-2008 Subaru Forester, 1993-2007 Subaru Impreza, 1990-2004 Subaru Legacy, 2000-2019 Subaru Outback. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2006\u003c\/td\u003e\n\u003ctd\u003eSaab\u003c\/td\u003e\n\u003ctd\u003e9-2X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eScion\u003c\/td\u003e\n\u003ctd\u003eFR-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eBRZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-2008\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eForester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2007\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eImpreza\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1990-2004\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eLegacy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2019\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eOutback\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eWhiteline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eKCA335\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eWHLKCA335\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e9319924243266\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eShock Mounts \u0026amp; Camber Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalog Status\u003c\/th\u003e\n\u003ctd\u003eManufacturer Catalog Verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Whiteline shock mounts \u0026amp; camber plates identified by manufacturer part number KCA335, plus only the hardware expressly supplied by Whiteline for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Whiteline\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhiteline develops suspension components for street and performance applications, including sway bars, bushings, links, control arms, springs, and alignment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Whiteline Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/whiteline\"\u003eShop all Whiteline products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-04-22-lexus-gx460-470-front-strut-spacer\"\u003eWhiteline 04-22 Lexus GX460\/470 Front Strut - Spacer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-15-16-audi-a3-15-19-vw-golf-r-front-strut-mount-camber-caster\"\u003eWhiteline 15-16 Audi A3 \/ 15-19 VW Golf R Front Strut Mount (Camber\/Caster)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-1965-1982-chevrolet-corvette-rear-spring-cushions\"\u003eWhiteline 1965-1982 Chevrolet Corvette Rear Spring Cushions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Whiteline KCA335 fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eVerified catalog applications: 2005-2006 Saab 9-2X, 2013 Scion FR-S, 2013 Subaru BRZ, 1998-2008 Subaru Forester, 1993-2007 Subaru Impreza, 1990-2004 Subaru Legacy, 2000-2019 Subaru Outback. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I verify before ordering?\u003c\/strong\u003e\u003cbr\u003eVerify the exact part number, year, make, model, suspension configuration, mounting position, dimensions, factory equipment, and manufacturer exclusions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe package contains only the Whiteline components and hardware specified for part number KCA335. Related service parts and tools are sold separately unless expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow Whiteline's current instructions for part number KCA335. Support the vehicle safely, test-fit every component, torque fasteners at the specified suspension position, and complete an alignment when the procedure requires it.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":39854727430223,"sku":"WHLKCA335","price":264.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/whiteline-04-07-subaru-wrxsti-98-02-subaru-forester-front-upper-strut-mounts-offset-assembly-shock-mounts-camber-plates-whiteline.jpg?v=1723318120"},{"product_id":"whiteline-96-00-honda-civic-ej-ek-front-caster-adj-kit-lwr-c-arm","title":"Whiteline 96-00 Honda Civic EJ \u0026 EK Front Caster adj kit - lwr c\/arm","description":"\u003cp\u003eWhiteline 96-00 Honda Civic EJ \u0026amp; EK Front Caster adj kit - lwr c\/arm is the exact Whiteline caster kits identified by manufacturer part number KCA366. Match the part number, vehicle application, mounting position, dimensions, and suspension configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstallation Difficulty: Difficult Installation Time (hrs): 2.5 Kit Contents: 2 Bushings, 2 Tubes, 2 Washers Website Position: Front Wheel Alignment Required: Yes.\u003c\/li\u003e\n\u003cli\u003eSupplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.\u003c\/li\u003e\n\u003cli\u003eHonda Alignment Caster Kit - Front - Whiteline KCA366 \/ 09319924342686 Control Arm Lower - Inner Rear Bushing Kit-Double Offset Whiteline Control arm - lower inner rear bushing.\u003c\/li\u003e\n\u003cli\u003eWhiteline caster kits are designed to improve cornering grip and vehicle straight line stability through increased static caster and dynamic negative camber gain.\u003c\/li\u003e\n\u003cli\u003eIn addition, synthetic elastomer bushings provide improved steering feedback and braking performance.\u003c\/li\u003e\n\u003cli\u003eEngineered to alter\/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response \u0026amp; increase directional stability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVerified catalog applications: 1998-2001 Honda CR-V, 1996-2000 Honda Civic. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-2001\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCR-V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1996-2000\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eWhiteline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eKCA366\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eWHLKCA366\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e9319924342686\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCaster Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalog Status\u003c\/th\u003e\n\u003ctd\u003eManufacturer Catalog Verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Whiteline caster kits identified by manufacturer part number KCA366, plus only the hardware expressly supplied by Whiteline for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Whiteline\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhiteline develops suspension components for street and performance applications, including sway bars, bushings, links, control arms, springs, and alignment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Whiteline Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/whiteline\"\u003eShop all Whiteline products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-02-07-subaru-wrx-sedan-and-wagon-03-07-subaru-impreza-non-turbo-04-07-subaru-sti-94\"\u003eWhiteline 02-07 Subaru WRX Sedan and Wagon \/ 03-07 Subaru Impreza Non-Turbo \/ 04-07 Subaru STi \/ 93-\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-06-15-mazda-mx-5-miata-dual-offset-caster-bushings\"\u003eWhiteline 06-15 Mazda MX-5 Miata Dual-Offset Caster Bushings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-09-ford-fiesta-09-mazda-2de-front-caster-correction-c-a-l-i-rear-bushing\"\u003eWhiteline 09+ Ford Fiesta \/ 09+ Mazda 2DE Front Caster Correction C\/A L\/I Rear Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Whiteline KCA366 fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eVerified catalog applications: 1998-2001 Honda CR-V, 1996-2000 Honda Civic. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I verify before ordering?\u003c\/strong\u003e\u003cbr\u003eVerify the exact part number, year, make, model, suspension configuration, mounting position, dimensions, factory equipment, and manufacturer exclusions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe package contains only the Whiteline components and hardware specified for part number KCA366. Related service parts and tools are sold separately unless expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow Whiteline's current instructions for part number KCA366. Support the vehicle safely, test-fit every component, torque fasteners at the specified suspension position, and complete an alignment when the procedure requires it.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":39854730182735,"sku":"WHLKCA366","price":46.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/whiteline-96-00-honda-civic-ej-ek-front-caster-adj-kit-lwr-carm-caster-kits-whiteline-2.jpg?v=1723318139"},{"product_id":"whiteline-01-05-honda-civic-es-eu-02-06-acura-rsx-type-s-dc5-rear-camber-adj-kit-uppr-c-arm","title":"Whiteline 01-05 Honda Civic ES \u0026 EU \/ 02-06 Acura RSX Type S DC5 Rear Camber adj kit - uppr c\/arm","description":"\u003cp\u003eWhiteline 01-05 Honda Civic ES \u0026amp; EU \/ 02-06 Acura RSX Type S DC5 Rear Camber adj kit - uppr c\/arm is the exact Whiteline camber kits identified by manufacturer part number KCA368. Match the part number, vehicle application, mounting position, dimensions, and suspension configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhiteline Adjustable Camber kits allow for easy on-car adjustment and fine tuning of camber settings resulting in improved traction, increased cornering grip and better tire life - ultimately improving overall performance.\u003c\/li\u003e\n\u003cli\u003eThe kit includes low compliance synthetic elastomer bushings which maintain preferred alignment settings as well as enhanced steering response.\u003c\/li\u003e\n\u003cli\u003eSupplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.\u003c\/li\u003e\n\u003cli\u003eAcura, Honda Suspension Control Arm Bushing - Rear Upper Outer - Whiteline KCA368 \/ 09319924342709 Control Arm Upper - Outer Bushing Kit-Double Offset Whiteline Control arm - upper outer bushing.\u003c\/li\u003e\n\u003cli\u003eProtective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.\u003c\/li\u003e\n\u003cli\u003eInternal grease reservoirs provide continual self lubrication for optimum friction management.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVerified catalog applications: 2002-2006 Acura RSX, 1997-2006 Honda CR-V, 2001-2005 Honda Civic. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eRSX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2006\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCR-V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2001-2005\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eWhiteline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eKCA368\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eWHLKCA368\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e9319924342709\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCamber Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalog Status\u003c\/th\u003e\n\u003ctd\u003eManufacturer Catalog Verified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Whiteline camber kits identified by manufacturer part number KCA368, plus only the hardware expressly supplied by Whiteline for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Whiteline\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhiteline develops suspension components for street and performance applications, including sway bars, bushings, links, control arms, springs, and alignment hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Whiteline Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/whiteline\"\u003eShop all Whiteline products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-01-05-honda-civic-02-06-acura-rsx-type-s-12-subaru-brz-front-camber-adj-bolt-kit-16m\"\u003eWhiteline 01-05 Honda Civic \/ 02-06 Acura RSX Type S \/ 12+ Subaru BRZ Front Camber Adj Bolt Kit-16m\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-02-07-wrx-f-r-03-07-impreza-na-f-r-04-07-sti-f-r-08-wrx-hatch-f-only-08-09-sti\"\u003eWhiteline 02-07 WRX F\u0026amp;R \/ 03-07 Impreza NA F\u0026amp;R \/ 04-07 STi F\u0026amp;R \/ 08+ WRX Hatch F Only \/ 08-09 STi\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/whiteline-05-mazda-miata-mx5-7-03-mazda-rx8-front-camber-correction-c-a-upper-inner-bushing\"\u003eWhiteline 05+ Mazda Miata\/MX5 \/ 7\/03+ Mazda RX8 Front Camber Correction C\/A Upper Inner Bushing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Whiteline KCA368 fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eVerified catalog applications: 2002-2006 Acura RSX, 1997-2006 Honda CR-V, 2001-2005 Honda Civic. Confirm trim, suspension configuration, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I verify before ordering?\u003c\/strong\u003e\u003cbr\u003eVerify the exact part number, year, make, model, suspension configuration, mounting position, dimensions, factory equipment, and manufacturer exclusions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe package contains only the Whiteline components and hardware specified for part number KCA368. Related service parts and tools are sold separately unless expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow Whiteline's current instructions for part number KCA368. Support the vehicle safely, test-fit every component, torque fasteners at the specified suspension position, and complete an alignment when the procedure requires it.\u003c\/p\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":39854730313807,"sku":"WHLKCA368","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/whiteline-01-05-honda-civic-es-eu-02-06-acura-rsx-type-s-dc5-rear-camber-adj-kit-uppr-carm-camber-kits-whiteline-5.jpg?v=1723318142"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/collections\/alignment-components.png?v=1782262153","url":"https:\/\/www.blackopsautoworks.com\/collections\/alignment-components.oembed?page=2","provider":"Black Ops Auto Works","version":"1.0","type":"link"}