{"title":"Artec Industries","description":"\u003cp\u003e\u003cstrong\u003eShop Artec Industries axle trusses, axle-swap kits, skid plates, steering components, suspension brackets, inner fenders, and fabrication hardware at Black Ops Auto Works.\u003c\/strong\u003e This collection includes application-specific upgrades for select Jeep Wrangler, Gladiator, Cherokee, Toyota Tacoma, Toyota 4Runner, Ford Super Duty, and custom axle builds.\u003c\/p\u003e\n\u003cp\u003eArtec Industries products range from direct bolt-on armor to advanced weld-on fabrication systems. Correct selection depends on the vehicle, axle housing, suspension geometry, drivetrain, engine, and intended conversion. Match the exact Artec part number and read the installation requirements before ordering.\u003c\/p\u003e\n\u003ch4\u003eArtec Industries Axle Trusses\u003c\/h4\u003e\n\u003cp\u003eAxle trusses reinforce compatible axle housings and can provide mounting locations for suspension links, springs, shocks, track bars, and other components. This collection includes trusses for selected Ford 8.8, Ford 9-inch, Ford Super Duty, Dana-style, and GM 14-bolt applications.\u003c\/p\u003e\n\u003cp\u003eAn axle description such as Ford 8.8, Ford 9-inch, Dana 60, or 14-bolt is not enough to confirm compatibility. Verify the housing generation, differential position, tube diameter, tube length, casting shape, pinion location, and intended suspension. Front and rear axle trusses are not interchangeable.\u003c\/p\u003e\n\u003ch4\u003eJeep Axle-Swap Kits and Brackets\u003c\/h4\u003e\n\u003cp\u003eArtec axle-swap systems combine trusses and suspension brackets designed around specific Jeep and axle combinations. Available products include a TJ Ford 8.8 swap kit and an APEX rear 14-bolt truss swap kit for selected Jeep JK applications.\u003c\/p\u003e\n\u003cp\u003eAxle swaps require accurate pinion angle, wheelbase, track width, caster, control-arm geometry, spring placement, shock position, driveshaft alignment, brake plumbing, and steering clearance. Confirm the axle casting and vehicle platform before welding any component. A swap kit does not necessarily include the axle, gears, differential, brakes, shafts, driveshaft, steering, or every component needed to complete the conversion.\u003c\/p\u003e\n\u003ch4\u003eWeld-On Trusses, Gussets, and Fabrication Parts\u003c\/h4\u003e\n\u003cp\u003eMany Artec trusses, gussets, shock tabs, track-bar brackets, and high-steer components require welding and general fabrication. The installer may need to measure, cut, grind, tack, cycle the suspension, and finish-weld the assembly. Heat introduced during welding can distort an axle housing if the work is performed incorrectly.\u003c\/p\u003e\n\u003cp\u003eThese components should be installed by a competent fabricator familiar with axle preparation, cast and mild-steel welding requirements, suspension geometry, and distortion control. Mock up the complete assembly and verify clearance before final welding or coating.\u003c\/p\u003e\n\u003ch4\u003eLower Control Arm Skids and Bracket Protection\u003c\/h4\u003e\n\u003cp\u003eArtec lower-control-arm skids help protect compatible factory brackets from contact with rocks and trail obstacles. The collection includes products for selected Jeep JK and JL front or rear axle locations. Some designs are weld-on, while the JL rear LCA skids listed by Artec are a direct bolt-on application that installs over compatible factory brackets.\u003c\/p\u003e\n\u003cp\u003eConfirm the axle position, bracket dimensions, suspension components, and joint clearance. “Front,” “rear,” “JK,” and “JL” identify different products. Review whether each listing is sold as a pair and whether factory hardware is reused.\u003c\/p\u003e\n\u003ch4\u003eToyota Tacoma and 4Runner Protection\u003c\/h4\u003e\n\u003cp\u003eThe collection includes a third-generation Toyota Tacoma full skid-plate system designed to protect multiple underbody areas. Artec specifies aluminum skid sections with steel mounting brackets for that system. Coverage includes the oil pan, transmission area, front exhaust, transfer case, and fuel tank according to the manufacturer’s current product information.\u003c\/p\u003e\n\u003cp\u003eConfirm the exact Tacoma generation, cab, wheelbase, drivetrain, engine, fuel tank, exhaust, and factory skid equipment. Aftermarket bumpers, suspension parts, exhaust systems, and other underbody modifications may affect clearance. A complete skid system is different from an individual replacement panel or mounting bracket.\u003c\/p\u003e\n\u003ch4\u003eSteering and Suspension Components\u003c\/h4\u003e\n\u003cp\u003eArtec steering and suspension products in this collection include an aluminum Super Duty steering kit, high-steer arms, track-bar brackets, coil-correction components, link kits, spacers, shackles, shock tabs, and related fabrication parts.\u003c\/p\u003e\n\u003cp\u003eSteering and suspension geometry directly affects vehicle control. Verify taper orientation, bolt size, misalignment spacing, joint width, axle diameter, track-bar position, drag-link angle, bump travel, and full steering clearance. A professional alignment and inspection may be required after installation.\u003c\/p\u003e\n\u003ch4\u003eJeep Inner Fenders and Light Mounts\u003c\/h4\u003e\n\u003cp\u003eVehicle-specific body products include vented front inner fenders, rear inner fenders, and hood-mounted light-bar brackets for selected Jeep JL and JT applications. Artec’s JL rear inner fenders are offered as driver and passenger components, while installation may require additional holes depending on the vehicle and surrounding fenders.\u003c\/p\u003e\n\u003cp\u003eConfirm the engine, factory fender configuration, shock or coilover clearance, wiring route, and required finish. Raw aluminum components may require preparation and coating for the desired appearance and long-term protection.\u003c\/p\u003e\n\u003ch4\u003eBefore You Order Artec Industries Parts\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the exact vehicle, axle housing, drivetrain, engine, and suspension.\u003c\/li\u003e\n\u003cli\u003eUse the complete Artec Industries part number as the primary identifier.\u003c\/li\u003e\n\u003cli\u003eDetermine whether the product is bolt-on, weld-on, or requires fabrication.\u003c\/li\u003e\n\u003cli\u003eVerify axle tube diameter, differential offset, casting, and bracket locations.\u003c\/li\u003e\n\u003cli\u003eCheck steering, driveshaft, exhaust, brake-line, and suspension clearance.\u003c\/li\u003e\n\u003cli\u003eReview included components and identify separately required parts.\u003c\/li\u003e\n\u003cli\u003eComplete all mock-up and suspension cycling before final welding or coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 style=\"margin-top: 24px;\"\u003e\u003c\/h4\u003e\n\u003ch4 style=\"margin-top: 24px;\"\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003ch5 style=\"margin: 16px 0 8px;\"\u003eAre Artec Industries axle trusses universal?\u003c\/h5\u003e\n\u003cp style=\"margin: 0 0 16px;\"\u003eNo. Trusses are designed around specific axle housings, castings, tube dimensions, and differential positions. Match the exact axle and Artec part number before ordering.\u003c\/p\u003e\n\u003ch5 style=\"margin: 16px 0 8px;\"\u003eDo Artec axle-swap kits require welding?\u003c\/h5\u003e\n\u003cp style=\"margin: 0 0 16px;\"\u003eMany do. Axle-swap kits and trusses commonly require substantial welding, accurate measurement, and suspension setup. Review the instructions for the exact product and use a qualified fabricator.\u003c\/p\u003e\n\u003ch5 style=\"margin: 16px 0 8px;\"\u003eDoes an axle-swap kit include a complete axle?\u003c\/h5\u003e\n\u003cp style=\"margin: 0 0 16px;\"\u003eNot unless the listing expressly says so. Many swap kits contain a truss and mounting brackets while the axle assembly, gears, brakes, steering, driveshaft, and other components are sourced separately.\u003c\/p\u003e\n\u003ch5 style=\"margin: 16px 0 8px;\"\u003eAre all Artec skid plates made from aluminum?\u003c\/h5\u003e\n\u003cp style=\"margin: 0 0 16px;\"\u003eNo. Material depends on the product. The Tacoma full system uses aluminum skid sections and steel brackets, while selected control-arm skids and fabrication components use steel. Confirm the individual listing.\u003c\/p\u003e\n\u003ch5 style=\"margin: 16px 0 8px;\"\u003eShould suspension alignment be checked after installation?\u003c\/h5\u003e\n\u003cp style=\"margin: 0 0 16px;\"\u003eYes when the installation changes axle position, steering, track-bar location, control-arm geometry, or ride height. Verify alignment, fastener torque, brake-line clearance, steering travel, and driveshaft operation before regular use.\u003c\/p\u003e\n\u003ch4 style=\"margin-top: 24px;\"\u003eShop Artec Industries Off-Road Parts\u003c\/h4\u003e\n\u003cp\u003eExplore Artec Industries trusses, swap kits, armor, steering parts, and fabrication components by exact vehicle and axle application. Browse our \u003ca href=\"\/collections\/body-armor\"\u003ebody armor and protection\u003c\/a\u003e and \u003ca href=\"\/collections\/drivetrain\"\u003edrivetrain parts\u003c\/a\u003e for related upgrades. Confirm the product number, installation method, and required supporting components before purchase.\u003c\/p\u003e","products":[{"product_id":"artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle","title":"Artec Industries Raised Trackbar Bracket for 3.5\" Diameter Front Axle","description":"\u003cp\u003eArtec Industries Raised Trackbar Bracket for 3.5\" Diameter Front Axle, part number BR1139, is selected by the published axle, joint, or fabrication dimensions rather than a direct vehicle application. Confirm every measurement and installation requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" steel\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and CNC bent for precise fit\u003c\/li\u003e\n\u003cli\u003eEngineered using 3D scan files\u003c\/li\u003e\n\u003cli\u003eReplaces factory bracket\u003c\/li\u003e\n\u003cli\u003eEngineered for lifts 3” or higher\u003c\/li\u003e\n\u003cli\u003eRaises roll center for increased stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by its axle, joint, or fabrication dimensions. No direct year, make, and model fitment is claimed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eBR1139\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eBrackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791026934\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number BR1139 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-heavy-duty-raised-tracbar-bracket\"\u003eArtec Industries 07-18 Jeep Wrangler JK Heavy Duty Raised Tracbar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-heavy-duty-stock-tracbar-bracket\"\u003eArtec Industries 07-18 Jeep Wrangler JK Heavy Duty Stock Tracbar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-97-06-jeep-wrangler-tj-stock-tracbar-bracket-replacement-for-tj-front-axle\"\u003eArtec Industries 97-06 Jeep Wrangler TJ Stock Tracbar Bracket Replacement For Tj Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part BR1139 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739115835471,"sku":"ARTBR1139","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/abb0282e73acd4d0dc2bd85a29339521L.jpg?v=1789011574"},{"product_id":"artec-industries-2005-2012-ford-f-250-f-350-crossover-weld-on-high-steer-arms-superduty-knuckle","title":"Artec Industries Crossover Weld-On High Steer Arms - 05+ SuperDuty","description":"\u003cp\u003eArtec Industries Crossover Weld-On High Steer Arms - 05+ SuperDuty, part number HS6150, is engineered for 2005-2012 Ford F-250 Super Duty, 2005-2012 Ford F-350 Super Duty. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConfigurable and affordable weld-on arms for optimal steering setup\u003c\/li\u003e\n\u003cli\u003eFully fabricated for best geometry and clearances\u003c\/li\u003e\n\u003cli\u003eAllows straight tie rods and clears deep differential covers\u003c\/li\u003e\n\u003cli\u003eIncludes knuckle bolts and tapered spacers for tight fit and increased strength\u003c\/li\u003e\n\u003cli\u003e3\/4\" bolt holes for uncompromising steering strength\u003c\/li\u003e\n\u003cli\u003ePrecision laser-cut from 1\/4\" steel and CNC bent for accurate fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2012\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2012\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eHS6150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eSteering Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791026866\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number HS6150 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-jk-jku-superduty-2005-7075-aluminum-steering-kit-for-jk\"\u003eArtec Industries 07-18 Jeep Jk Jku Superduty 2005+ 7075 Aluminum Steering Kit For Jk\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle\"\u003eArtec Industries Raised Tracbar Bracket For 3 1\/2 In Diameter Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part HS6150 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739115933775,"sku":"ARTHS6150","price":305.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/2257528a5924e1e12764d2a94942db58L.jpg?v=1789011575"},{"product_id":"artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit","title":"Artec Industries JK 1 TON - APEX Rear 14 bolt Truss Swap Kit","description":"\u003cp\u003eArtec Industries JK 1 TON - APEX Rear 14 bolt Truss Swap Kit, part number JK1415, is engineered for 2007-2018 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIn-house se CNC laser cut from ¼\" and 3\/16” mild steel\u003c\/li\u003e\n\u003cli\u003eLightweight and robust\u003c\/li\u003e\n\u003cli\u003eHassle-free installation: Reinforced truss – simply drop it in place and start welding\u003c\/li\u003e\n\u003cli\u003e3D models from Dana Corp and vehicle OEM for perfect fit and clearance\u003c\/li\u003e\n\u003cli\u003e70% less welding needed than previous designs for less warping, faster turnaround, lower costs\u003c\/li\u003e\n\u003cli\u003eDimpled holes provide light weight and rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2007-2018\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJK1415\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00810039900147\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number JK1415 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-1974-2010-chevrolet-gmc-k20-k30-14-bolt-apex-pinion-guard-with-bridge\"\u003eArtec Industries 1974-2010 Chevrolet \/ GMC K20 K30 14 Bolt Apex Pinion Guard With Bridge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part JK1415 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739116490831,"sku":"ARTJK1415","price":554.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/8111a989b331e57fefc2516109dd4e30L.jpg?v=1789011577"},{"product_id":"artec-industries-07-18-jeep-wrangler-jk-front-lca-skids","title":"Artec Industries JK Front LCA Skids","description":"\u003cp\u003eArtec Industries JK Front LCA Skids, part number JK4404, is engineered for 2007-2018 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated skid plate\u003c\/li\u003e\n\u003cli\u003eJoint protection from direct impact\u003c\/li\u003e\n\u003cli\u003eDecreases premature wear on joint\u003c\/li\u003e\n\u003cli\u003eDesigned to not interfere with joint movement\u003c\/li\u003e\n\u003cli\u003eSecured to axle better than OEM so it doesn’t rip off\u003c\/li\u003e\n\u003cli\u003e1\/4\" thick steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2007-2018\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJK4404\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eSkid Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791021717\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number JK4404 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-18-25-jeep-wrangler-jl-jt-jl-front-lca-skids\"\u003eArtec Industries 18-25 Jeep Wrangler JL Jt Jl Front Lca Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-18-25-jeep-wrangler-jl-sahara-jl-rear-lca-bolt-on-skids\"\u003eArtec Industries 18-25 Jeep Wrangler JL Sahara Jl Rear Lca Bolt-On Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-20-25-jeep-wrangler-sahara-jt-gladiator-t-case-fuel-skid-kit-only-3-6l-alum\"\u003eArtec Industries 20-25 Jeep Wrangler Sahara Jt Gladiator T-Case\/Fuel Skid Kit Only - 3.6L Alum\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part JK4404 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739117539407,"sku":"ARTJK4404","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/63e26482e380129ac23768af555ff61aL.jpg?v=1789011578"},{"product_id":"artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets","title":"Artec Industries JK Inner C Gussets","description":"\u003cp\u003eArtec Industries JK Inner C Gussets, part number JK4405, is engineered for 2007-2018 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrecision fit that wraps around axle inner C not just adds a flat gusset\u003c\/li\u003e\n\u003cli\u003eContoured inner C gusset adds reinforcement\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and CNC bent for precise fit\u003c\/li\u003e\n\u003cli\u003eEngineered using 3D scan files\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eJK made from ¼” Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2007-2018\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJK4405\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791021724\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number JK4405 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-1974-2010-chevrolet-gmc-k20-k30-14-bolt-apex-pinion-guard-with-bridge\"\u003eArtec Industries 1974-2010 Chevrolet \/ GMC K20 K30 14 Bolt Apex Pinion Guard With Bridge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part JK4405 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739117703247,"sku":"ARTJK4405","price":102.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/02a111cf0156d7883901beab0f327e82L.jpg?v=1789011580"},{"product_id":"artec-industries-07-18-jeep-wrangler-jk-heavy-duty-raised-tracbar-bracket","title":"Artec Industries JK Heavy Duty Raised Trackbar Bracket","description":"\u003cp\u003eArtec Industries JK Heavy Duty Raised Trackbar Bracket, part number JK4406, is engineered for 2007-2018 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" steel\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and CNC bent for precise fit\u003c\/li\u003e\n\u003cli\u003eEngineered using 3D scan files\u003c\/li\u003e\n\u003cli\u003eReplaces factory bracket\u003c\/li\u003e\n\u003cli\u003eEngineered for lifts 3” or higher\u003c\/li\u003e\n\u003cli\u003eRaises roll center for increased stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2007-2018\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJK4406\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eBrackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791021731\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number JK4406 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle\"\u003eArtec Industries Raised Tracbar Bracket For 3 1\/2 In Diameter Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-heavy-duty-stock-tracbar-bracket\"\u003eArtec Industries 07-18 Jeep Wrangler JK Heavy Duty Stock Tracbar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-97-06-jeep-wrangler-tj-stock-tracbar-bracket-replacement-for-tj-front-axle\"\u003eArtec Industries 97-06 Jeep Wrangler TJ Stock Tracbar Bracket Replacement For Tj Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part JK4406 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739117801551,"sku":"ARTJK4406","price":91.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/19611f629a3285988af55f02ec4ae71fL.jpg?v=1789011580"},{"product_id":"artec-industries-07-18-jeep-wrangler-jk-heavy-duty-stock-tracbar-bracket","title":"Artec Industries JK Heavy Duty Stock Trackbar Bracket","description":"\u003cp\u003eArtec Industries JK Heavy Duty Stock Trackbar Bracket, part number JK4407, is engineered for 2007-2018 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" steel\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and CNC bent for precise fit\u003c\/li\u003e\n\u003cli\u003eEngineered using 3D scan files\u003c\/li\u003e\n\u003cli\u003eReplaces factory bracket\u003c\/li\u003e\n\u003cli\u003eImproved ground clearance\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2007-2018\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJK4407\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eBrackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791021748\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number JK4407 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle\"\u003eArtec Industries Raised Tracbar Bracket For 3 1\/2 In Diameter Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-heavy-duty-raised-tracbar-bracket\"\u003eArtec Industries 07-18 Jeep Wrangler JK Heavy Duty Raised Tracbar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-97-06-jeep-wrangler-tj-stock-tracbar-bracket-replacement-for-tj-front-axle\"\u003eArtec Industries 97-06 Jeep Wrangler TJ Stock Tracbar Bracket Replacement For Tj Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part JK4407 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739117965391,"sku":"ARTJK4407","price":60.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/3b046b90d5a9dbf17aabb72112ff0cc2L.jpg?v=1789160337"},{"product_id":"artec-industries-18-25-jeep-wrangler-jl-jt-jl-front-lca-skids","title":"Artec Industries JL Front LCA Skids","description":"\u003cp\u003eArtec Industries JL Front LCA Skids, part number JL4504, is engineered for 2018-2025 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated skid plate\u003c\/li\u003e\n\u003cli\u003eJoint protection from direct impact\u003c\/li\u003e\n\u003cli\u003eDecreases premature wear on joint\u003c\/li\u003e\n\u003cli\u003eDesigned to not interfere with joint movement\u003c\/li\u003e\n\u003cli\u003eSecured to axle better than OEM so it doesn’t rip off\u003c\/li\u003e\n\u003cli\u003e1\/4\" thick steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2018-2025\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJL4504\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eSkid Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791028037\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number JL4504 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-front-lca-skids\"\u003eArtec Industries 07-18 Jeep Wrangler JK Front Lca Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-18-25-jeep-wrangler-jl-sahara-jl-rear-lca-bolt-on-skids\"\u003eArtec Industries 18-25 Jeep Wrangler JL Sahara Jl Rear Lca Bolt-On Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-20-25-jeep-wrangler-sahara-jt-gladiator-t-case-fuel-skid-kit-only-3-6l-alum\"\u003eArtec Industries 20-25 Jeep Wrangler Sahara Jt Gladiator T-Case\/Fuel Skid Kit Only - 3.6L Alum\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part JL4504 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739118129231,"sku":"ARTJL4504","price":60.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/4031f02d73415ccee1b12dff81502a87L.jpg?v=1789011584"},{"product_id":"artec-industries-18-25-jeep-wrangler-jl-sahara-jl-rear-lca-bolt-on-skids","title":"Artec Industries JL Rear Axle LCA Bolt-on Skids","description":"\u003cp\u003eArtec Industries JL Rear Axle LCA Bolt-on Skids, part number JL4599, is engineered for 2018-2025 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits over the OEM LCA bracket no trimming necessary\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on application\u003c\/li\u003e\n\u003cli\u003eMade from 3\/16\" thick boxed steel plate\u003c\/li\u003e\n\u003cli\u003eLightly textured black powder coat\u003c\/li\u003e\n\u003cli\u003eUtilizes factory hardware\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2018-2025\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJL4599\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eSkid Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791028648\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number JL4599 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-front-lca-skids\"\u003eArtec Industries 07-18 Jeep Wrangler JK Front Lca Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-18-25-jeep-wrangler-jl-jt-jl-front-lca-skids\"\u003eArtec Industries 18-25 Jeep Wrangler JL Jt Jl Front Lca Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-20-25-jeep-wrangler-sahara-jt-gladiator-t-case-fuel-skid-kit-only-3-6l-alum\"\u003eArtec Industries 20-25 Jeep Wrangler Sahara Jt Gladiator T-Case\/Fuel Skid Kit Only - 3.6L Alum\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part JL4599 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739118227535,"sku":"ARTJL4599","price":153.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/762b242e9f1fae4fdfef5fa226149deaL.jpg?v=1789011584"},{"product_id":"artec-industries-18-25-jeep-wrangler-jl-sahara-jl-jt-front-inner-fenders-all-engines-vented","title":"Artec Industries JL \/ JT Front Inner Fenders - All Engines - Vented","description":"\u003cp\u003eArtec Industries JL \/ JT Front Inner Fenders - All Engines - Vented, part number JL5113, is engineered for 2018-2025 Jeep Wrangler, 2020-2025 Jeep Gladiator. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAllows use of larger tires up to 40\" with suspension lift\u003c\/li\u003e\n\u003cli\u003eLightweight 1\/16\" aluminum construction\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and CNC bent for precise fit\u003c\/li\u003e\n\u003cli\u003eThe vented area can be retained while trimming for coilovers or bumpstops\u003c\/li\u003e\n\u003cli\u003eCompatible with trimmed OEM fenders\u003c\/li\u003e\n\u003cli\u003eLaser cut venting means no extra mesh bolt on\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2018-2025\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020-2025\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGladiator\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJL5113\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eFender Liners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791025777\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number JL5113 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle\"\u003eArtec Industries Raised Tracbar Bracket For 3 1\/2 In Diameter Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2005-2012-ford-f-250-f-350-crossover-weld-on-high-steer-arms-superduty-knuckle\"\u003eArtec Industries 2005-2012 Ford F-250 F-350 Crossover Weld-On High Steer Arms - Superduty Knuckle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part JL5113 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739118293071,"sku":"ARTJL5113","price":331.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/ed2c43dd238b36085d6682c5f8c4e496L.jpg?v=1789011586"},{"product_id":"artec-industries-18-25-jeep-wrangler-jl-sahara-jl-50-inch-led-light-bar-mount-hood","title":"Artec Industries JL 50 inch LED Light Bar Mounts - Hood","description":"\u003cp\u003eArtec Industries JL 50 inch LED Light Bar Mounts - Hood, part number JL5602, is engineered for 2018-2025 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for Rigid Industries D Series lights\u003c\/li\u003e\n\u003cli\u003e1\/8\" steel construction\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and CNC bent for precise fit\u003c\/li\u003e\n\u003cli\u003eEngineered using 3D scan files\u003c\/li\u003e\n\u003cli\u003eIncludes new hardware and spacers\u003c\/li\u003e\n\u003cli\u003eEasy installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2018-2025\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJL5602\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eLighting Mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791028570\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number JL5602 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle\"\u003eArtec Industries Raised Tracbar Bracket For 3 1\/2 In Diameter Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2005-2012-ford-f-250-f-350-crossover-weld-on-high-steer-arms-superduty-knuckle\"\u003eArtec Industries 2005-2012 Ford F-250 F-350 Crossover Weld-On High Steer Arms - Superduty Knuckle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part JL5602 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739118391375,"sku":"ARTJL5602","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/e6099cec9636fcd8cd4f74faf50420d3L.jpg?v=1789011587"},{"product_id":"artec-industries-20-25-jeep-wrangler-sahara-jt-gladiator-t-case-fuel-skid-kit-only-3-6l-alum","title":"Artec Industries JT Gladiator T-CASE\/FUEL SKID Kit ONLY - 3.6L ALUMINUM","description":"\u003cp\u003eArtec Industries JT Gladiator T-CASE\/FUEL SKID Kit ONLY - 3.6L ALUMINUM, part number JT4159, is engineered for 2020-2025 Jeep Gladiator. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComplete protection for Full Bellypan System or modular options for Oil and Transmission Pan, Fuel\u003c\/li\u003e\n\u003cli\u003eTank and Transfer Case, Etorque Skid, or Exhaust Skid\u003c\/li\u003e\n\u003cli\u003ePremium Materials: 1\/4” 6061 T6 heat treated aluminum skids\u003c\/li\u003e\n\u003cli\u003ePremium materials: Zinc-plated steel brackets\u003c\/li\u003e\n\u003cli\u003eDesigned from factory CAD files and 3D laser Creaform scan technology for precision and fit\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and formed for high strength and perfect fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2020-2025\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGladiator\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eJT4159\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eSkid Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00810039904763\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number JT4159 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-front-lca-skids\"\u003eArtec Industries 07-18 Jeep Wrangler JK Front Lca Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-18-25-jeep-wrangler-jl-jt-jl-front-lca-skids\"\u003eArtec Industries 18-25 Jeep Wrangler JL Jt Jl Front Lca Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-18-25-jeep-wrangler-jl-sahara-jl-rear-lca-bolt-on-skids\"\u003eArtec Industries 18-25 Jeep Wrangler JL Sahara Jl Rear Lca Bolt-On Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part JT4159 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739118620751,"sku":"ARTJT4159","price":2021.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/68b24a9bf5102d1b6c364cbd2d1452e2L.png?v=1789011590"},{"product_id":"artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar","title":"Artec Industries 4Runner 5G ALUMINUM Rear Link Kit with Track Bar","description":"\u003cp\u003eArtec Industries 4Runner 5G ALUMINUM Rear Link Kit with Track Bar, part number LK7401, is engineered for 2014-2023 Toyota 4Runner. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLightweight links offer better fuel mileage and less wear and tear\u003c\/li\u003e\n\u003cli\u003eEasy installation and less maintenance with lightweight aluminum construction\u003c\/li\u003e\n\u003cli\u003eRust-resistant aluminum means no need for frequent repainting\u003c\/li\u003e\n\u003cli\u003eNatural shininess adds curb appeal to your vehicle\u003c\/li\u003e\n\u003cli\u003eSignificant weight savings compared to steel links, improving overall performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2014-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e4Runner\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eLK7401\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00810039900796\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number LK7401 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-1974-2010-chevrolet-gmc-k20-k30-14-bolt-apex-pinion-guard-with-bridge\"\u003eArtec Industries 1974-2010 Chevrolet \/ GMC K20 K30 14 Bolt Apex Pinion Guard With Bridge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part LK7401 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739118719055,"sku":"ARTLK7401","price":1060.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/b48552c9e7ba9c5cdd93efd024a14effL.jpg?v=1789011590"},{"product_id":"artec-industries-1974-2010-chevrolet-gmc-k20-k30-14-bolt-apex-pinion-guard-with-bridge","title":"Artec Industries 14 bolt APEX Pinion Guard with Bridge","description":"\u003cp\u003eArtec Industries 14 bolt APEX Pinion Guard with Bridge, part number PG1404, is selected by the published axle, joint, or fabrication dimensions rather than a direct vehicle application. Confirm every measurement and installation requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\/8\" and 1\/4\" steel construction\u003c\/li\u003e\n\u003cli\u003eLow profile for ideal geometry\u003c\/li\u003e\n\u003cli\u003eIncludes Truss Bridge\u003c\/li\u003e\n\u003cli\u003eReinforced with interlocked gussets\u003c\/li\u003e\n\u003cli\u003eSleek and easy to fit\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by its axle, joint, or fabrication dimensions. No direct year, make, and model fitment is claimed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003ePG1404\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00810039900628\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number PG1404 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part PG1404 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739118784591,"sku":"ARTPG1404","price":184.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/b543f8a89faa092a40fc8bd47621fc24L.jpg?v=1789011591"},{"product_id":"artec-industries-07-18-jeep-jk-jku-superduty-2005-7075-aluminum-steering-kit-for-jk","title":"Artec Industries Superduty Swap ALUMINUM Steering Kit","description":"\u003cp\u003eArtec Industries Superduty Swap ALUMINUM Steering Kit, part number SK6006, is intended for modified or axle-swap applications. Confirm the vehicle, donor axle, geometry, measurements, and fabrication requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade from 7075 Aluminum\u003c\/li\u003e\n\u003cli\u003ePremium Tie Rod Ends\u003c\/li\u003e\n\u003cli\u003eRight- and Left-hand thread for easy alignment\u003c\/li\u003e\n\u003cli\u003eMachined wrench flats for easy tightening and a smooth look\u003c\/li\u003e\n\u003cli\u003eAXIS Aluminum Steering Kit for JL\/JT\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and CNC bent for precise fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is intended for modified or axle-swap applications. Confirm the vehicle, axle, steering geometry, measurements, and fabrication requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eSK6006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eSteering Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eFitment Verification Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00810039900468\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number SK6006 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2005-2012-ford-f-250-f-350-crossover-weld-on-high-steer-arms-superduty-knuckle\"\u003eArtec Industries 2005-2012 Ford F-250 F-350 Crossover Weld-On High Steer Arms - Superduty Knuckle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle\"\u003eArtec Industries Raised Tracbar Bracket For 3 1\/2 In Diameter Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part SK6006 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739118948431,"sku":"ARTSK6006","price":1283.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/2b4b302be1b6d862e60a6b46a0f45700L.jpg?v=1789011592"},{"product_id":"artec-industries-short-7-8-in-high-misalignment-spacers-ss-pair-3-4-inch","title":"Artec Industries Narrow 7\/8\" high misalignment spacers SS (pair)","description":"\u003cp\u003eArtec Industries Narrow 7\/8\" high misalignment spacers SS (pair), part number SP1403, is selected by the published axle, joint, or fabrication dimensions rather than a direct vehicle application. Confirm every measurement and installation requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArtec Industries High misalignment spacer\u003c\/li\u003e\n\u003cli\u003eSold in pairs\u003c\/li\u003e\n\u003cli\u003eUsed with various heims\u003c\/li\u003e\n\u003cli\u003eFaster ball rotation\u003c\/li\u003e\n\u003cli\u003eMaximum articulation\u003c\/li\u003e\n\u003cli\u003eEnhance your vehicle's flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by its axle, joint, or fabrication dimensions. No direct year, make, and model fitment is claimed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eSP1403\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eFabrication Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791023353\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number SP1403 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-flat-shock-tab-pair-long\"\u003eArtec Industries Flat Shock Tab (Pair) - Long\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle\"\u003eArtec Industries Raised Tracbar Bracket For 3 1\/2 In Diameter Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2005-2012-ford-f-250-f-350-crossover-weld-on-high-steer-arms-superduty-knuckle\"\u003eArtec Industries 2005-2012 Ford F-250 F-350 Crossover Weld-On High Steer Arms - Superduty Knuckle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part SP1403 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739119013967,"sku":"ARTSP1403","price":20.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/42c83944f1912234e75d36c6daab9f4aL.jpg?v=1789011594"},{"product_id":"artec-industries-flat-shock-tab-pair-long","title":"Artec Industries Flat Shock Tabs (pair)","description":"\u003cp\u003eArtec Industries Flat Shock Tabs (pair), part number TB1017, is selected by the published axle, joint, or fabrication dimensions rather than a direct vehicle application. Confirm every measurement and installation requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCNC cut 1\/4\" mild steel for reliability and easy installation\u003c\/li\u003e\n\u003cli\u003eCompatible with most shocks for easy integration\u003c\/li\u003e\n\u003cli\u003eArtec Industries' commitment to quality and performance\u003c\/li\u003e\n\u003cli\u003eUpgrade your suspension system with ease\u003c\/li\u003e\n\u003cli\u003eExperience superior handling both on and off the road\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by its axle, joint, or fabrication dimensions. No direct year, make, and model fitment is claimed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTB1017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eFabrication Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791023650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TB1017 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-short-7-8-in-high-misalignment-spacers-ss-pair-3-4-inch\"\u003eArtec Industries Short 7\/8 In High Misalignment Spacers Ss (Pair) 3\/4 Inch\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle\"\u003eArtec Industries Raised Tracbar Bracket For 3 1\/2 In Diameter Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2005-2012-ford-f-250-f-350-crossover-weld-on-high-steer-arms-superduty-knuckle\"\u003eArtec Industries 2005-2012 Ford F-250 F-350 Crossover Weld-On High Steer Arms - Superduty Knuckle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TB1017 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739119112271,"sku":"ARTTB1017","price":14.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/85f467fb8cfd0db202e6c3944e02d32aL.jpg?v=1789011594"},{"product_id":"artec-industries-97-06-jeep-wrangler-tj-rear-coil-correction-kit","title":"Artec Industries TJ Rear Coil Correction Kit","description":"\u003cp\u003eArtec Industries TJ Rear Coil Correction Kit, part number TJ2015, is engineered for 1997-2006 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes standard bridge, weld-on truss flange, and 7 grade 8 bolts and nuts\u003c\/li\u003e\n\u003cli\u003eMade of 1\/4\" steel, CNC cut and bent\u003c\/li\u003e\n\u003cli\u003eFixes bowing springs caused by OEM spring perches set at an angle\u003c\/li\u003e\n\u003cli\u003eAllows for any lift height without bowing\u003c\/li\u003e\n\u003cli\u003eIncludes provisions for a 1 inch stretch\u003c\/li\u003e\n\u003cli\u003eCompatible with all Artec 60 Front Trusses and Ram Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1997-2006\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTJ2015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eCoil Spring Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791027306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TJ2015 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle\"\u003eArtec Industries Raised Tracbar Bracket For 3 1\/2 In Diameter Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2005-2012-ford-f-250-f-350-crossover-weld-on-high-steer-arms-superduty-knuckle\"\u003eArtec Industries 2005-2012 Ford F-250 F-350 Crossover Weld-On High Steer Arms - Superduty Knuckle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TJ2015 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739119374415,"sku":"ARTTJ2015","price":173.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/8669a6dfde8f9d228536030fb00f09f7L.jpg?v=1789011596"},{"product_id":"artec-industries-97-06-jeep-wrangler-tj-stock-tracbar-bracket-replacement-for-tj-front-axle","title":"Artec Industries Stock Trackbar Bracket Replacement for TJ Front Axle","description":"\u003cp\u003eArtec Industries Stock Trackbar Bracket Replacement for TJ Front Axle, part number TJ2016, is engineered for 1984-2001 Jeep Cherokee, 1993-1998 Jeep Grand Cherokee, 1997-2006 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1\/4\" steel\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and CNC bent for precise fit\u003c\/li\u003e\n\u003cli\u003eEngineered using 3D scan files\u003c\/li\u003e\n\u003cli\u003eReplaces factory bracket\u003c\/li\u003e\n\u003cli\u003eImproved ground clearance\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1984-2001\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCherokee\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-1998\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGrand Cherokee\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2006\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTJ2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eBrackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791027412\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TJ2016 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-raised-tracbar-bracket-for-3-1-2-in-diameter-front-axle\"\u003eArtec Industries Raised Tracbar Bracket For 3 1\/2 In Diameter Front Axle\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-heavy-duty-raised-tracbar-bracket\"\u003eArtec Industries 07-18 Jeep Wrangler JK Heavy Duty Raised Tracbar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-heavy-duty-stock-tracbar-bracket\"\u003eArtec Industries 07-18 Jeep Wrangler JK Heavy Duty Stock Tracbar Bracket\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TJ2016 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739119472719,"sku":"ARTTJ2016","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/94b5ae0ff163ee29f8347eff79e8527dL.jpg?v=1789011596"},{"product_id":"artec-industries-93-06-jeep-wrangler-tj-lj-d30-front-axle-truss","title":"Artec Industries Front Axle Truss for TJ, LJ, ZJ","description":"\u003cp\u003eArtec Industries Front Axle Truss for TJ, LJ, ZJ, part number TJ3001, is engineered for 1993-1998 Jeep Grand Cherokee, 1997-2006 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApex design provides more rigidity than a flat top truss design. Patent Pending\u003c\/li\u003e\n\u003cli\u003eCNC precision laser cut\u003c\/li\u003e\n\u003cli\u003eDimpled holes provide light weight and rigidity\u003c\/li\u003e\n\u003cli\u003eCNC precision bending ensures perfect fitment\u003c\/li\u003e\n\u003cli\u003eHassle-free installation: Reinforced truss – simply drop it in place and start welding\u003c\/li\u003e\n\u003cli\u003e3D models from Dana Corp and vehicle OEM for perfect fit and clearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-1998\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGrand Cherokee\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2006\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTJ3001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791024213\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TJ3001 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TJ3001 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739119538255,"sku":"ARTTJ3001","price":153.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/4705345ff312d629b7e8b5e8655332efL.jpg?v=1789011597"},{"product_id":"artec-industries-93-06-jeep-wrangler-tj-lj-dana-30-inner-c-gussets","title":"Artec Industries Inner C Gussets","description":"\u003cp\u003eArtec Industries Inner C Gussets, part number TJ3010, is selected by the published axle, joint, or fabrication dimensions rather than a direct vehicle application. Confirm every measurement and installation requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrecision fit that wraps around axle inner C not just adds a flat gusset\u003c\/li\u003e\n\u003cli\u003eContoured inner C gusset adds reinforcement\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and CNC bent for precise fit\u003c\/li\u003e\n\u003cli\u003eEngineered using 3D scan files\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eJK made from ¼” Steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by its axle, joint, or fabrication dimensions. No direct year, make, and model fitment is claimed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTJ3010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791024275\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TJ3010 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TJ3010 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739119636559,"sku":"ARTTJ3010","price":97.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/294cb2e45bba65247f627eda7049de08L.jpg?v=1789011598"},{"product_id":"artec-industries-70-85-ford-f-150-9-inch-front-truss","title":"Artec Industries Ford 9 inch Front Truss","description":"\u003cp\u003eArtec Industries Ford 9 inch Front Truss, part number TR0910, is selected by the published axle, joint, or fabrication dimensions rather than a direct vehicle application. Confirm every measurement and installation requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReinforces entire axle and provides flat surface for upper link mounting\u003c\/li\u003e\n\u003cli\u003eBuilt to withstand serious abuse with 1\/4\" thick truss top and 10 gauge thick gussets\u003c\/li\u003e\n\u003cli\u003eStrengthened axle and link mounting surface with unique design\u003c\/li\u003e\n\u003cli\u003eFits fabricated and stamped axle housing and easily trimmed to shape\u003c\/li\u003e\n\u003cli\u003eFull-width and low profile design improves axle strength and fitment into any vehicle\u003c\/li\u003e\n\u003cli\u003eWorks well with Dana 44 and other 9\" Ring Gear class axles\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by its axle, joint, or fabrication dimensions. No direct year, make, and model fitment is claimed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTR0910\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791024428\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TR0910 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TR0910 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739119734863,"sku":"ARTTR0910","price":214.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/cc454220bb852b90b2fd044161191530L.jpg?v=1789011599"},{"product_id":"artec-industries-1970-2010-chevrolet-k30-k20-14-bolt-rear-short-truss","title":"Artec Industries 14 bolt Rear Short Truss","description":"\u003cp\u003eArtec Industries 14 bolt Rear Short Truss, part number TR1406, is selected by the published axle, joint, or fabrication dimensions rather than a direct vehicle application. Confirm every measurement and installation requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\/8\" thick truss top, 1\/4\" mild steel gussets: CNC cut and bent for precise fitment\u003c\/li\u003e\n\u003cli\u003eLow profile design: ideal link joint mounting at 9\" from axle centerline\u003c\/li\u003e\n\u003cli\u003eVersatile: fits between leaf springs or as a base for link suspension mounts\u003c\/li\u003e\n\u003cli\u003eReinforced with interlocked 1\/4\" thick gussets for maximum strength and easy assembly\u003c\/li\u003e\n\u003cli\u003eEnhances axle strength, sleekness, and compatibility without interfering with vehicle components\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by its axle, joint, or fabrication dimensions. No direct year, make, and model fitment is claimed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTR1406\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791026927\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TR1406 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TR1406 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739119800399,"sku":"ARTTR1406","price":214.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/bb67dfcbfa7763ace2dd2d84904463a9L.jpg?v=1789011600"},{"product_id":"artec-industries-1970-2010-chevrolet-k30-k20-14-bolt-front-truss","title":"Artec Industries 14 bolt Front Truss","description":"\u003cp\u003eArtec Industries 14 bolt Front Truss, part number TR1408, is selected by the published axle, joint, or fabrication dimensions rather than a direct vehicle application. Confirm every measurement and installation requirement before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModular Truss Ends: driver or passenger side differential options\u003c\/li\u003e\n\u003cli\u003eCustom width axles: easy trimming with Modular Truss End\u003c\/li\u003e\n\u003cli\u003e3\/8\" steel truss top, 1\/4\" gussets: CNC cut, bent for excellent fitment\u003c\/li\u003e\n\u003cli\u003eLow profile truss: ideal geometry for link joint mounting (7-10 inches)\u003c\/li\u003e\n\u003cli\u003eInterlocked 1\/4\" gussets: maximum strength and easy assembly\u003c\/li\u003e\n\u003cli\u003eLow profile design: stronger, sleeker axle, minimal vehicle interference\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by its axle, joint, or fabrication dimensions. No direct year, make, and model fitment is claimed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTR1408\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791027238\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TR1408 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TR1408 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739119865935,"sku":"ARTTR1408","price":338.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/7df44f637bf4807d7b88587bb2be96e7L.jpg?v=1789011601"},{"product_id":"artec-industries-78-79-ford-f-350-dana-60-ford-front-ram-mount-truss","title":"Artec Industries 60 FORD Front Ram Mount \u0026 Truss '78-79","description":"\u003cp\u003eArtec Industries 60 FORD Front Ram Mount \u0026amp; Truss '78-79, part number TR6030, is engineered for 1978-1979 Ford F-350. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCorrectly angled to account for Dodge knuckles\u003c\/li\u003e\n\u003cli\u003e3\/8\" thick truss top \u0026amp; 1\/4\" thick ram mount\/gussets, CNC cut and bent for precision fit\u003c\/li\u003e\n\u003cli\u003eLow profile truss allows ideal geometry for link joints\u003c\/li\u003e\n\u003cli\u003eComplete axle tube reinforcement, not just for mounting links\u003c\/li\u003e\n\u003cli\u003eInterlocked 1\/4\" gussets for easy assembly and maximum strength\u003c\/li\u003e\n\u003cli\u003e1\/4\" bridge connects truss to ram mount for extra protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1978-1979\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTR6030\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791024589\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TR6030 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TR6030 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739119964239,"sku":"ARTTR6030","price":651.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/626f4704af5130b256142d30df96ed08L.jpg?v=1789011602"},{"product_id":"artec-industries-2005-2023-ford-f-250-f-350-low-profile-ford-superduty-front-truss-2005","title":"Artec Industries Low Profile Ford SuperDuty Front Truss","description":"\u003cp\u003eArtec Industries Low Profile Ford SuperDuty Front Truss, part number TR6055, is engineered for 2005-2023 Ford F-250 Super Duty, 2005-2023 Ford F-350 Super Duty. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\/8\" and 1\/4\" mild steel truss and gussets, CNC cut and bent for great fitment\u003c\/li\u003e\n\u003cli\u003eLow profile design for more oil pan clearance and increased uptravel\u003c\/li\u003e\n\u003cli\u003eSpans entire length of axle for complete reinforcement of the axle tubes\u003c\/li\u003e\n\u003cli\u003eInterlocked 1\/4\" thick gussets provide maximum strength and easy assembly\u003c\/li\u003e\n\u003cli\u003eWider interlocking gussets add overall strength to the truss\u003c\/li\u003e\n\u003cli\u003eInternal gussets fit the differential contours for additional strength and rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTR6055\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791026613\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TR6055 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TR6055 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739120259151,"sku":"ARTTR6055","price":306.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/ae48db1f6fcedfcf2ae8e5ccbe9dc055L.jpg?v=1789011603"},{"product_id":"artec-industries-97-06-jeep-wrangler-tj8-8-swap-kit-with-truss","title":"Artec Industries TJ 8.8 Swap Kit with Truss","description":"\u003cp\u003eArtec Industries TJ 8.8 Swap Kit with Truss, part number TR8801, is engineered for 1997-2006 Jeep Wrangler. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIn-house CNC laser cut from ¼\" and 3\/16” mild steel\u003c\/li\u003e\n\u003cli\u003eLightweight and robust\u003c\/li\u003e\n\u003cli\u003eHassle-free installation: Reinforced truss – simply drop it in place and start welding\u003c\/li\u003e\n\u003cli\u003e3D models from Dana Corp and vehicle OEM for perfect fit and clearance\u003c\/li\u003e\n\u003cli\u003e70% less welding needed than previous designs for less warping, faster turnaround, lower costs\u003c\/li\u003e\n\u003cli\u003eDimpled holes provide light weight and rigidity\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1997-2006\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTR8801\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00816791024749\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TR8801 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-1-ton-apex-rear-14-bolt-truss-swap-kit\"\u003eArtec Industries 07-18 Jeep Wrangler JK 1 Ton - Apex Rear 14 Bolt Truss Swap Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-inner-c-gussets\"\u003eArtec Industries 07-18 Jeep Wrangler JK Inner C Gussets\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-2014-2023-toyota-4runner4runner-5g-aluminum-rear-link-kit-with-track-bar\"\u003eArtec Industries 2014-2023 Toyota 4Runner4Runner 5G Aluminum Rear Link Kit With Track Bar\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TR8801 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739120324687,"sku":"ARTTR8801","price":402.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/9049eb4016b39f567ef6175a240b9c36L.jpg?v=1789160272"},{"product_id":"artec-industries-2017-2023-toyota-tacoma-3rd-gen-full-skid-plate-system-a-arm-bellypan-fuel","title":"Artec Industries Toyota Tacoma 3rd Gen Full Skid Plate System - A-arm, Bellypan, Fuel","description":"\u003cp\u003eArtec Industries Toyota Tacoma 3rd Gen Full Skid Plate System - A-arm, Bellypan, Fuel, part number TY7060, is engineered for 2017-2023 Toyota Tacoma. Match the axle, suspension, drivetrain, and factory configuration before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComplete protection for the Oil Pan, Transmission Pan, Fuel Tank, Front Exhaust, and Transfer Case\u003c\/li\u003e\n\u003cli\u003ePremium Materials: 1\/4” 6061 T6 heat treated aluminum skids\u003c\/li\u003e\n\u003cli\u003ePremium materials: Zinc-plated steel brackets\u003c\/li\u003e\n\u003cli\u003eDesigned from factory CAD files and 3D laser Creaform scan technology for precision and fit\u003c\/li\u003e\n\u003cli\u003eCNC laser cut and formed for high strength and perfect fitment\u003c\/li\u003e\n\u003cli\u003eArtec Industries custom bolts countersunk bolts that match OEM thread\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2017-2023\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003eConfirm axle, suspension, drivetrain, and factory configuration\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eArtec Industries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTY7060\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eSkid Plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC or GTIN\u003c\/th\u003e\n\u003ctd\u003e00810039901328\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Artec Industries component identified by manufacturer part number TY7060 in the configuration shown. Related components, tools, coatings, welding supplies, and installation hardware are included only when expressly stated by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Artec Industries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArtec Industries designs and manufactures axle, suspension, steering, armor, and fabrication components for demanding off-road applications. Product selection depends on the exact vehicle, axle, geometry, dimensions, and installation method.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Artec Industries Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-07-18-jeep-wrangler-jk-front-lca-skids\"\u003eArtec Industries 07-18 Jeep Wrangler JK Front Lca Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-18-25-jeep-wrangler-jl-jt-jl-front-lca-skids\"\u003eArtec Industries 18-25 Jeep Wrangler JL Jt Jl Front Lca Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/artec-industries-18-25-jeep-wrangler-jl-sahara-jl-rear-lca-bolt-on-skids\"\u003eArtec Industries 18-25 Jeep Wrangler JL Sahara Jl Rear Lca Bolt-On Skids\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/artec-industries\"\u003eShop all Artec Industries products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Artec part TY7060 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, vehicle or axle application, dimensions, material, mounting location, and every installation note shown.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo axle or chassis codes belong in the vehicle model field?\u003c\/strong\u003e\u003cbr\u003eNo. Codes identify a platform, axle, or generation. Convermax fitment uses only the actual year, make, and vehicle model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs welding or fabrication required?\u003c\/strong\u003e\u003cbr\u003eMany Artec components require welding, grinding, coating, or custom fabrication. Review the current manufacturer instructions and use a qualified installer before modifying the vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConfirm every part and measurement before disassembly. Follow current Artec Industries instructions, use proper vehicle support and protective equipment, complete any welding with a qualified welder, coat bare metal, torque all fasteners to specification, and inspect clearance and operation before driving.\u003c\/p\u003e","brand":"Artec Industries","offers":[{"title":"Default Title","offer_id":46739120390223,"sku":"ARTTY7060","price":3378.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/ca6c0126208895683fd4e083edc779a0L.jpg?v=1789011605"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/collections\/artec-industries-logo-1000x1000.webp?v=1789161477","url":"https:\/\/www.blackopsautoworks.com\/collections\/artec-industries.oembed","provider":"Black Ops Auto Works","version":"1.0","type":"link"}