Due to Covid-19, Carbon Fiber & Select products have an 8 week lead time. Free Shipping - On 99% of products sitewide!
BLACK OPS KILLSHOT SUSPENSION PKG. JEEP 2012-19
Black Ops KILLSHOT Suspension Pack. JEEP 2017-2021
BLACK OPS KILLSHOT SUSPENSION PKG. JEEP 2012-19
Sold Out
  • SKU: SUSPENSIONPKG-06

Black Ops KILLSHOT Suspension Pack. JEEP 2017-2021

$ 2,814.00
    DESCRIPTION

    Fits all 2017-2021 Jeep Grand Cherokee 

    Package Includes:

    1 Set Black Ops Swift Spring WK2 2017-2021

    (4 springs per set)

    1 Set Adj. Front Upper A-Arms Jeep/Durango 2017-2021

    (2 arms per set)

    1 Set Adj. Rear Arms Jeep/Durango 2017-2021

    (4 arms per set)

    1 Set End links Jeep/Durango 2017-2021

    (4 pieces per set)

    1 Set Toe Links Jeep/ Durango2017-2021 

    (2 Links Per Set)

     

     Black Ops Auto Works Exclusive

    By Swift 

    This is a Pre Sale Only for the springs!

    ETA of Springs arriving at the end of May 

    Shipping possibly beginning of June to mid June 

    You will not get tracking and there will not be any info on them until the Ship date mentioned above.

    If you can not wait please do not order, we have no way of getting these here sooner than the dates mentioned below!

    Again these will ship Mid to late June possibly worse case.

    Don't miss out we expect them to sell out.

    Terms: Please note this is a pre order only if these do not ship by mid June you will get an email with the estimated lead time. The pandemic is holding a lot of the shipping channels up so delays are expected with what’s happening world wide. 

    Note: If you do order please know we are not holding anyone hostage this is a voluntary group buy so at any time if you would like or need a full refund we will be more than happy to refund you. Life happens and we fully understand this so it’s no issue whatsoever please ask and we will refund you immediately! Also we can not update the lead time every week via email if you are not ok with the lead time posted above please do NOT order. We have a hard time updating 100’s of orders weekly via email so again please do NOT order if you are not able to wait it out. These do sell out every month and are in very high demand we do our best to update timelines and eta’s but this has proven to be difficulty as of late with today’s happenings around the globe. Hope you understand we do appreciate everyone’s patience and understanding.


    "Swift will Not sell These to Anyone Direct"

    Spec-R Springs By SWIFT

    These Springs Will lower your 2012-2021 Jeep Grand Cherokee Drop Rate 1.6" in the front and 2.6" in the Rear for the best Track Experience Possible. 

    Swift's focus is to put more tire to pavement than any other spring.

    Built for track duty, Swift Spec-R springs are designed at the upper limits of the OEM shock valving. Tuned for optimum performance yet comfortable enough for a daily driver.

    Swift made Sport Springs keeps the quality ride you get from the showroom, and adds improved handling and lower ride height for driving enthusiasts and style minded drivers who demand only the best.

    From HPDE events to SCCA competition, Swift Spec-R Sport Springs are made for the track enthusiast looking to take their vehicle to the next level.

    Swift Spec-R Sport Springs were engineered with 3 characteristics in mind.

    1. Modified ride height compared to a Sport Springs to maximize optimal suspension geometry.
    2. Further increasing the spring rate to enhance overall performance. The increase in spring rate is based on the upper limits of the vehicles factory shock valving.
    3. Maintaining optimal comfort level for street use.

    WK2 Billet Adjustable Front Upper Control Arms  

    Black Ops Autoworks is proud to once again bring you the absolute best parts made to solve a real problem on the WK2 Chassis.

    For the many of you who have lowered your ride, you know that doing so causes your Camber to go out-of-spec negative Front and Rear.  Our popular Billet Adjustable Rear Upper Control Arms have helped hundreds of you get the rear adjusted back into spec, but until now there has not been a good solution for the front.

    These arms are designed to be stronger than the OEM stamped steel arms while at the same time allowing a full range of adjustment using our special, laser-cut stainless steel locking tabs.  These tabs allow approximately plus-or-minus 1.2 degrees of camber adjustment in the front (with a little more being available in special circumstances).

    We use a Made in the USA stainless steel, TEFLON-lined spherical bearing with all stainless retaining rings.  We even Loctite the bearing in place during assembly to ensure it never tries to move or spin.  Our new bearing cover keeps the top of the bearing clean which helps it to live a long and happy life.

    All hardware you need is included (factory inboard mount bolts are retained) and this system is 100% compatible with the factory ride-height sensor system.  So, install them easily, get to the alignment shop to get them dialed in, and put an end to excessive tire wear, unpredictable handling, and lack of traction from a bad alignment.

    Engineered, manufactured, assembled and packaged in the USA using nearly 100% USA-made parts, there simply is not a better front alignment solution in existence for the WK2 chassis.

    NOTE:
    Please make sure you use the supplied Silicone lube before install to avoid the Stiffer bushing from squeaking, Energy Suspension bushings are known to squeak if not lubed



    Adjustable Rear Control Arms

    Other solutions in the market offer standard threaded adjustments, this style lacks durability not to mention the threaded portions are not loaded axially. 

    Our arms incorporate some of the same technology as the GRAND-AM racing team on their LC race cars - Adjustment tabs.

    Each arm is precision machined from solid Blocks of 6061 billet aluminum and the tabs are laser-cut from steel and plated for an exact fit. 

    By changing out the tabs with different offsets, you can tune the alignment of your vehicle to suit your needs whether you're trying to increase or reduce camber. The arms are designed to occupy the same space the OEM arms do.

    Need Another reason to change from the OEM Arms to ours?

    A stock bushing protrudes out of the part (shell) about a half inch on both sides combined with the fact that the bushings are soft there is a lot of deflection. We machine our parts so there is only 1/8 on each side and use an 85 Durometer Poly. bushing, this minimizes deflection and helps control oscillation.

    TOTAL OF 4 ARMS INCLUDED!!!

    NOTE: These arms are Stress analyzed using Finite Element Analysis or FEA. They are not cut or welded by an amateur in a garage or machine shop. 

    Safety is key in a part like this!!!

    What is Finite Element Analysis?

    Finite Element Analysis is based on the premise that an approximate solution to any complex engineering problem can be reached by subdividing the problem into smaller, more manageable (finite) elements. Using finite elements, complex partial differential equations that describe the behavior of structures can be reduced to a set of linear equations that can easily be solved using the standard techniques of matrix algebra.

    Why use Finite Element Analysis?

    The finite element method is being used in virtually every engineering discipline. The aerospace, automotive, biomedical, chemicals, electronics, energy, geotechnical, manufacturing, and plastics industries routinely apply finite element analysis. In addition, it is not only used for analyzing classical static structural problems, but also for such diverse areas as mass transport, heat transfer, dynamics, stability, and radiation problems. Finite element analysis is the method of choice for optimizing new designs, verifying the fitness of existing facilities, predictive performance and evaluating new concepts. In addition, it has been used extensively for accident reconstruction and forensic investigations


     

    Black Ops Auto Works Swaybar Endlinks

    These replace the flimsy OEM links with rigid, CNC-machined billet aluminum parts. We use urethane ball sockets in the ends to ensure proper endlink function with no additional noise or vibration. 

    Sold by the set 4pcs (front and rears)

    NOTE: These arms are Stress analyzed using Finite Element Analysis or FEA. What is Finite Element Analysis?

    Finite Element Analysis is based on the premise that an approximate solution to any complex engineering problem can be reached by subdividing the problem into smaller, more manageable (finite) elements. Using finite elements, complex partial differential equations that describe the behavior of structures can be reduced to a set of linear equations that can easily be solved using the standard techniques of matrix algebra.


    Black Ops auto works

     

    100% Sourced USA Materials 

    MADE IN THE USA

    Hawaii and Alaska please email us Here for a shipping quote we cannot honor your checkout shipping costs. 

     

    NEW Orders Please allow 7-10 days assembly and inspection time
    Hawaii and Alaska please email us Here for a shipping quote we cannot honor your checkout shipping costs. 
     
    ALL International locations: We are always willing to ship inside the USA to your forwarder we do not ship internationally our Apologies.

    Important: Please click Here for Install requirements along with our Shipping Policies

     

    RELATED PRODUCTS

    BACK TO TOP