{"title":"ARP Head Studs","description":"\u003cp\u003eShop ARP head studs, main studs, rod bolts, flywheel and flexplate bolts, pressure-plate hardware, wheel studs, engine fasteners, assembly tools, and Ultra-Torque lubricant by exact manufacturer part number. Match every engine, vehicle, thread, length, material, strength series, quantity, lubricant, and preload requirement before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHead Studs and Main Studs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHead and main stud kits are specific to the engine family, block, cylinder head, main-cap arrangement, material, and required clamping load. Confirm the exact engine generation and ARP series, then follow the current lubricant, tightening sequence, torque, or stretch instructions supplied for that kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRod, Flywheel, Flexplate, and Pressure-Plate Hardware\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCritical rotating-assembly fasteners must match thread diameter and pitch, under-head or overall length, shank, head style, material, quantity, and mating component. Similar-looking fasteners are not interchangeable, and factory torque values may not apply to ARP hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWheel Studs and Chassis Fasteners\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWheel studs require exact knurl diameter, thread pitch, length, shoulder, hub thickness, wheel and spacer stack, lug-nut engagement, and installation method. Verify front or rear application and package quantity before pressing or pulling studs into a hub.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTools, Lubricant, and Installation Supplies\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the socket, stretch gauge, thread chaser, lubricant, washer, nut, and installation procedure specified for the exact fastener. Friction changes preload, so lubricant and torque values must be treated as one matched procedure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Choose the Correct ARP Part\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatch the exact ARP manufacturer part number\u003c\/li\u003e\n\u003cli\u003eConfirm engine family, model year, component, and application notes\u003c\/li\u003e\n\u003cli\u003eVerify thread pitch, length, material, series, head style, and quantity\u003c\/li\u003e\n\u003cli\u003eUse the specified ARP lubricant and tightening method\u003c\/li\u003e\n\u003cli\u003eMeasure clearance and thread engagement before final assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the factory torque specification with ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre ARP 2000 and Custom Age 625 Plus fasteners interchangeable?\u003c\/strong\u003e\u003cbr\u003eNo. Material, strength, application, lubricant, and tightening requirements differ. Select the exact series and part number specified for the build.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I verify an ARP wheel stud will fit?\u003c\/strong\u003e\u003cbr\u003eMatch knurl diameter, thread pitch, usable length, shoulder, hub thickness, wheel and spacer stack, lug-nut engagement, axle position, and required quantity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould ARP studs and bolts be reused?\u003c\/strong\u003e\u003cbr\u003eReuse depends on the exact fastener, condition, installation method, measured stretch, and ARP guidance. Replace any damaged, corroded, necked, or out-of-spec hardware.\u003c\/p\u003e\n\u003cp\u003eBrowse related \u003ca href=\"\/en-ca\/collections\/hardware\"\u003eperformance hardware\u003c\/a\u003e, \u003ca href=\"\/en-ca\/collections\/head-components\"\u003eengine head components\u003c\/a\u003e, \u003ca href=\"\/en-ca\/collections\/wheel-studs\"\u003ewheel studs\u003c\/a\u003e, and \u003ca href=\"\/en-ca\/collections\/wheels-tires\"\u003ewheels and tires\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"arp-chevy-duramax-6-6l-lb7-12pt-valve-cover-bolt-kit","title":"ARP Valve Cover Bolts for Chevy Duramax 6.6L (LB7)","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Valve Cover Bolts for Chevy Duramax 6.6L (LB7). Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese bolts deliver reliable clamping force to maintain gasket seals under high boost and vibration.\u003c\/li\u003e\n\u003cli\u003eEngine builders choose them for precise fit and consistent torque retention during performance upgrades.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7531\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eValve Cover Bolts for Chevy Duramax 6.6L (LB7)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e8740 chrome moly steel resists fatigue and stretching for long-term valve cover retention\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack oxide coating protects against rust and corrosion in engine bay conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eCompact 12-point heads allow access with standard sockets in tight spaces around the Duramax heads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003eIncludes 20 bolts (1\/4-20 x 1.900 inch) and flat washers for complete installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in USA with ARP precision machining for exact OEM replacement fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this kit fit 2004.5 or later Duramax engines? A: No, 100-7531 fits only 2001-2004 LB7 6.6L. use ARP 100-7907 for LLY and later\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact box 1 x 6 x 8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.80 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features Material\u003c\/th\u003e\n\u003ctd\u003e8740 chrome moly steel resists fatigue and stretching for long-term valve cover retention\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Valve Cover Bolts for Chevy Duramax 6.6L (LB7) fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7531, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861234303055,"sku":"ARP100-7531","price":93.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-valve-cover-bolts-for-chevy-duramax-6_6l-lb7-arp.jpg?v=1768369871"},{"product_id":"arp-94-04-ford-mustang-front-wheel-stud-kit-set-of-5","title":"ARP 94-04 Ford Mustang Front Wheel Stud Kit (Set of 5)","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the 94-04 Ford Mustang Front Wheel Stud Kit (Set of 5). Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eReplace worn factory front wheel studs on your 1994-2004 Ford Mustang with this ARP kit featuring a set of 5 high-strength press-in studs.\u003c\/li\u003e\n\u003cli\u003eDesigned for SN95 and New Edge Mustangs including GT Cobra and V6 models these studs deliver reliable wheel retention during aggressive driving and track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7724\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e94-04 Ford Mustang Front Wheel Stud Kit (Set of 5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chromoly Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel heat treated to 200,000 psi tensile strength resists breakage under high torque and impacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRolled Threads\u003c\/th\u003e\n\u003ctd\u003e1\/2\"-20 x 2.625\" rolled thread design boosts fatigue resistance over cut OEM threads for longer service life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePress-In Design\u003c\/th\u003e\n\u003ctd\u003e14mm diameter shank provides exact fit into Mustang front hubs eliminating wobble and ensuring even lug nut torque\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eResists corrosion and galling for easy installation and removal even after repeated track days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet of 5\u003c\/th\u003e\n\u003ctd\u003eComplete one-side front replacement matches factory 5-lug pattern for 94-04 Mustang wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit 2003-2004 Mustang Mach 1 or Terminator Cobra front hubs? A: Yes ARP 100-7724 fits all 1994-2004 Mustang front hubs including Mach 1 SVT Cobra GT and V6 models with identical 5-lug press-in design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective sleeve in 1 x 4 x 6 inch box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.55 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures 8740 Chromoly Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel heat treated to 200,000 psi tensile strength resists breakage under high torque and impacts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 94-04 Ford Mustang Front Wheel Stud Kit (Set of 5) fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7724, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861234565199,"sku":"ARP100-7724","price":66.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-94-04-ford-mustang-front-wheel-stud-kit-set-of-5-arp.jpg?v=1768369873"},{"product_id":"arp-late-model-gm-m12x1-50inx2-50in-wheel-stud-kit","title":"ARP Late Model GM M12x1.50inX2.50in Wheel Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Late Model GM M12x1.50inX2.50in Wheel Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThe 20-piece set installs via press-fit knurling to provide rock-solid wheel mounting under high-stress track or street conditions.\u003c\/li\u003e\n\u003cli\u003eBuilt from 8740 chromoly steel these studs resist stretching or failure for dependable lug nut retention.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7725\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eLate Model GM M12x1.50inX2.50in Wheel Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chromoly Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel alloy withstands extreme torque and heat up to 200000 PSI tensile strength.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKnurled Shank Design\u003c\/th\u003e\n\u003ctd\u003eEnsures secure press-fit into hub without thread damage or loosening over time.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecision Rolled Threads\u003c\/th\u003e\n\u003ctd\u003eM12x1.50 right-hand threads offer smooth lug nut engagement and consistent clamping force.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2.50in Overall Length\u003c\/th\u003e\n\u003ctd\u003eMatches OEM specs for proper wheel centering and brake clearance on GM hubs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e20-Piece Kit\u003c\/th\u003e\n\u003ctd\u003eComplete set for all four wheels with extras for spares or replacements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2016 Camaro SS? A: Yes ARP 100-7725 fits 2010-2024 Camaro SS ZL1 and Z\/28 models with M12x1.5 hubs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or FedEx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact box measuring 7.3 x 5.3 x 1.8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.9 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures 8740 Chromoly Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel alloy withstands extreme torque and heat up to 200000 PSI tensile strength.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Late Model GM M12x1.50inX2.50in Wheel Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7725, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861234597967,"sku":"ARP100-7725","price":33.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-late-model-gm-m12x1_50inx2_50in-wheel-stud-kit-arp.jpg?v=1768369874"},{"product_id":"arp-gm-late-model-m12-x-1-5-x-2-0-wheel-stud-kit","title":"ARP GM Late Model M12 X 1.5 X 2.0 Wheel Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the GM Late Model M12 X 1.5 X 2.0 Wheel Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eUpgrade your GM Late Model drag car with ARP 100-7726 wheel studs designed for high-performance wheel retention.\u003c\/li\u003e\n\u003cli\u003eThese M12 x 1.5 x 2.0-inch studs fit 2005-2015 Chevrolet Camaro SS ZL1 Z\/28 Corvette Z06 ZR1 and 2009 Pontiac G8 GT hubs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7726\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eGM Late Model M12 X 1.5 X 2.0 Wheel Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged 8740 chromoly steel heat treated to 200,000 psi tensile strength for extreme load handling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread Specs\u003c\/th\u003e\n\u003ctd\u003eM12 x 1.5 rolled threads ensure maximum strength and precise fit in GM Late Model hubs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength and Knurl\u003c\/th\u003e\n\u003ctd\u003e2.0-inch length with knurled shank provides secure press-fit installation without pull-through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eSet of 10 studs replaces all wheel position studs on 6-lug GM applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack oxide coating resists corrosion during track use and storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this kit fit my 2012 Camaro SS? A: Yes ARP 100-7726 fits 2010-2015 Camaro SS ZL1 Z\/28 with M12x1.5 hubs confirm your hub thread size matches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eARP protective box 7.5 x 5.5 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.8 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features Material\u003c\/th\u003e\n\u003ctd\u003eForged 8740 chromoly steel heat treated to 200,000 psi tensile strength for extreme load handling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the GM Late Model M12 X 1.5 X 2.0 Wheel Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7726, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861234663503,"sku":"ARP100-7726","price":33.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-gm-late-model-m12-x-1_5-x-2_0-wheel-stud-kit-arp.jpg?v=1768369876"},{"product_id":"arp-subaru-brz-scion-frs-wheel-stud-kit","title":"ARP Subaru BRZ\/Scion FRS Wheel Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Subaru BRZ\/Scion FRS Wheel Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese high-strength studs handle the demands of wider wheels, lower offsets, and high-torque track conditions without failure.\u003c\/li\u003e\n\u003cli\u003eBuilt for direct replacement, they install into stock hubs for immediate reliability gains.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7727\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSubaru BRZ\/Scion FRS Wheel Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chromoly Steel\u003c\/th\u003e\n\u003ctd\u003eForged construction delivers 200,000 PSI tensile strength to resist bending or stripping under heavy loads.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRolled Threads\u003c\/th\u003e\n\u003ctd\u003eIncreases fatigue resistance by 100% over cut threads while providing smoother nut engagement and reduced galling.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat Treatment\u003c\/th\u003e\n\u003ctd\u003eProcessed to ARP exacting standards for consistent hardness and ductility across the entire stud length.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e14mm Knurl Diameter\u003c\/th\u003e\n\u003ctd\u003eEnsures perfect press-fit into aluminum hubs without play or loosening over time.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Set of 20\u003c\/th\u003e\n\u003ctd\u003eCovers all four wheels with M12x1.5 threads and 55.5mm overall length for OEM lug nut compatibility.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2017 Toyota 86? A: Yes, ARP 100-7727 fits all 2017-2021 Toyota 86 models directly into factory hubs with no modifications.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective cardboard tube inside 7.5 x 5.5 x 1 inch box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features 8740 Chromoly Steel\u003c\/th\u003e\n\u003ctd\u003eForged construction delivers 200,000 PSI tensile strength to resist bending or stripping under heavy loads.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Subaru BRZ\/Scion FRS Wheel Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7727, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861234696271,"sku":"ARP100-7727","price":33.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-subaru-brzscion-frs-wheel-stud-kit-arp.jpg?v=1768369877"},{"product_id":"arp-subaru-wrx-brz-scion-frs-1-95-uhl-12mm-x-1-25-wheel-stud-kit-5-pack","title":"ARP Subaru WRX\/BRZ \u0026 Scion FRS 1.95 UHL 12mm x 1.25 Wheel Stud Kit (5 Pack)","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Subaru WRX\/BRZ \u0026amp; Scion FRS 1.95 UHL 12mm x 1.25 Wheel Stud Kit (5 Pack). Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eUpgrade your wheel retention with this ARP wheel stud kit featuring 1.95-inch under head length and 12mm x 1.25 threads.\u003c\/li\u003e\n\u003cli\u003eDesigned for Subaru WRX, BRZ and Scion FRS models, these studs deliver reliable clamping force for performance wheels and track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7728\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSubaru WRX\/BRZ \u0026amp; Scion FRS 1.95 UHL 12mm x 1.25 Wheel Stud Kit (5 Pack)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtended Length\u003c\/th\u003e\n\u003ctd\u003e1.95-inch under head length (UHL) allows fitment of deeper lug nuts and aftermarket wheels requiring extra thread engagement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHigh Strength Material\u003c\/th\u003e\n\u003ctd\u003eForged from 8740 chromoly steel with 200,000 PSI tensile strength surpasses OEM specs for extreme load handling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRolled Threads\u003c\/th\u003e\n\u003ctd\u003eThreads formed after heat treatment resist fatigue and stripping during high torque applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCorrosion Protection\u003c\/th\u003e\n\u003ctd\u003eBlack oxide finish guards against rust in harsh conditions like salted roads or track environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConvenient Pack Size\u003c\/th\u003e\n\u003ctd\u003e5 studs per kit services one wheel, with knurled shank for secure press-in hub installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2018 Subaru WRX with aftermarket wheels? A: Yes, it fits 2015-2021 WRX models including Base, Premium and Limited trims. The 1.95 UHL clears most big brake kits and wide wheels.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eDurable box 1in x 4in x 6in protects components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.70 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features Extended Length\u003c\/th\u003e\n\u003ctd\u003e1.95-inch under head length (UHL) allows fitment of deeper lug nuts and aftermarket wheels requiring extra thread engagement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Subaru WRX\/BRZ \u0026amp; Scion FRS 1.95 UHL 12mm x 1.25 Wheel Stud Kit (5 Pack) fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7728, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861234761807,"sku":"ARP100-7728","price":33.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-subaru-wrxbrz-scion-frs-1_95-uhl-12mm-x-1_25-wheel-stud-kit-5-pack-arp.jpg?v=1768369879"},{"product_id":"arp-2015-subaru-wrx-sti-and-13-brz-extended-5-wheel-stud-kit","title":"ARP 2015+ Subaru WRX\/STI and 13+ BRZ Extended 5 Wheel Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the 2015+ Subaru WRX\/STI and 13+ BRZ Extended 5 Wheel Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThe 5mm extension over OEM length allows fitment of aftermarket wheels with deeper pockets or larger hub-centric rings while delivering reliable clamping force.\u003c\/li\u003e\n\u003cli\u003eIdeal for performance driving where secure wheel mounting prevents failures under high loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7729\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e2015+ Subaru WRX\/STI and 13+ BRZ Extended 5 Wheel Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eForged 8740 Chromoly Steel\u003c\/th\u003e\n\u003ctd\u003eHigh-strength material heat-treated to 200000 psi tensile strength resists stretching or breaking during hard cornering or drag launches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRolled Threads\u003c\/th\u003e\n\u003ctd\u003ePrecision rolling process increases fatigue strength by 25 percent over cut threads for longer service life in demanding conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtended Length Design\u003c\/th\u003e\n\u003ctd\u003e51.75mm overall length with 14mm knurl diameter and M12x1.25 thread provides extra thread engagement for wheels needing 5mm more reach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eResists corrosion and galling during installation and repeated lug nut removal on track days\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\u003ctd\u003e12 studs match OEM quantity for complete front and rear replacement on one vehicle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2018 Subaru WRX with aftermarket wheels? A: Yes it fits all 2015-2021 WRX models and provides the extra 5mm length for wheels requiring more thread engagement beyond OEM studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCardboard box 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.00 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures Forged 8740 Chromoly Steel\u003c\/th\u003e\n\u003ctd\u003eHigh-strength material heat-treated to 200000 psi tensile strength resists stretching or breaking during hard cornering or drag launches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 2015+ Subaru WRX\/STI and 13+ BRZ Extended 5 Wheel Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7729, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861234794575,"sku":"ARP100-7729","price":34.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-2015-subaru-wrxsti-and-13-brz-extended-5-wheel-stud-kit-arp.jpg?v=1768369881"},{"product_id":"arp-2015-ford-mustang-gt-m14-1-2in-over-stock-length-wheel-stud-kit","title":"ARP Wheel Stud Kit for Ford Mustang 2015 1\/2in Over Stock Length","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Wheel Stud Kit for Ford Mustang 2015 1\/2in Over Stock Length. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eARP heat-treated 8740 chrome moly wheel studs replace factory units on 2015-2024 Ford Mustang models for drag racing and oval track use.\u003c\/li\u003e\n\u003cli\u003eThese studs deliver 190,000 PSI tensile strength to withstand acceleration shear and lateral elongation forces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7732\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eWheel Stud Kit for Ford Mustang 2015 1\/2in Over Stock Length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Material\u003c\/th\u003e\n\u003ctd\u003eHeat-treated for 190,000 PSI tensile strength to endure high-stress racing conditions without failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e1\/2in Over Stock Length\u003c\/th\u003e\n\u003ctd\u003e2.315in overall length with 1.630in underhead allows compatibility with spacers thicker lug nuts and aftermarket wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCadmium Plating\u003c\/th\u003e\n\u003ctd\u003eResists corrosion and galling for long-term durability in harsh track environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKnurled Shank Design\u003c\/th\u003e\n\u003ctd\u003e0.551in diameter shank provides reliable press-fit retention in hub and knuckle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e14x1.5 Thread\u003c\/th\u003e\n\u003ctd\u003ePrecise right-hand threading matches OEM specs for secure lug nut mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this kit fit 2015-2024 Mustang GT front and rear? A: Yes ARP 100-7732 fits all 2015-2024 Ford Mustang models including GT EcoBoost and V6 front and rear wheel positions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective cardboard box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.71 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures 8740 Chrome Moly Material\u003c\/th\u003e\n\u003ctd\u003eHeat-treated for 190,000 PSI tensile strength to endure high-stress racing conditions without failure 1\/2in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Wheel Stud Kit for Ford Mustang 2015 1\/2in Over Stock Length fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7732, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861234958415,"sku":"ARP100-7732","price":55.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-wheel-stud-kit-for-ford-mustang-2015-12in-over-stock-length-arp.jpg?v=1768369882"},{"product_id":"arp-2015-ford-mustang-m14-1in-over-stock-length-wheel-stud-kit","title":"ARP 2015 Ford Mustang M14 1in Over Stock Length Wheel Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the 2015 Ford Mustang M14 1in Over Stock Length Wheel Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThe M14 x 2.0 studs measure 1 inch longer than OEM for reliable hub-to-wheel retention under high loads.\u003c\/li\u003e\n\u003cli\u003eEngineered for direct replacement these studs install into factory hubs with precise fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7733\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e2015 Ford Mustang M14 1in Over Stock Length Wheel Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtended Length\u003c\/th\u003e\n\u003ctd\u003e1 inch over stock at 3.165 inches overall supports big brake kits 15-inch wheels and spacers without compromising security\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHigh-Strength Material\u003c\/th\u003e\n\u003ctd\u003eForged 8740 chromoly steel heat treated to ARP 2000 standards withstands track abuse and repeated torque cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecise Threading\u003c\/th\u003e\n\u003ctd\u003eM14 x 2.0 matches OEM hubs with 19mm hex head for easy service using common tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSecure Knurling\u003c\/th\u003e\n\u003ctd\u003e0.622-inch knurl diameter grips hub bores firmly during press-in preventing spin-out under stress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit\u003c\/th\u003e\n\u003ctd\u003eSet of 20 studs covers all four 5-lug wheels on S550 Mustang platforms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill these studs fit 2015-2023 Mustang GT with Brembo brakes? A: Yes the 1-inch extension clears larger rotors and calipers while maintaining full thread engagement in the hub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or FedEx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective cardboard tube 7 x 1 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.95 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features Extended Length\u003c\/th\u003e\n\u003ctd\u003e1 inch over stock at 3.165 inches overall supports big brake kits 15-inch wheels and spacers without compromising security\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 2015 Ford Mustang M14 1in Over Stock Length Wheel Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7733, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235056719,"sku":"ARP100-7733","price":55.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-2015-ford-mustang-m14-1in-over-stock-length-wheel-stud-kit-arp.jpg?v=1768369883"},{"product_id":"arp-chrysler-front-rear-m14-500in-over-stock-length-wheel-stud-kit","title":"ARP Chrysler Front\/Rear M14 .500in Over Stock Length Wheel Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Chrysler Front\/Rear M14 .500in Over Stock Length Wheel Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eUpgrade your classic Mopar with the ARP 100-7734 wheel stud kit featuring M14x1.5 threads and 0.500 inches extra length over stock for wheel spacers aftermarket alloys and performance builds.\u003c\/li\u003e\n\u003cli\u003eThis 20-piece set fits front and rear on 1960-1980 Chrysler Dodge Plymouth models including Chargers Challengers trucks and vans delivering reliable clamping force for drag strip or street duty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7734\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eChrysler Front\/Rear M14 .500in Over Stock Length Wheel Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eM14x1.5 Thread\u003c\/th\u003e\n\u003ctd\u003eDirect OEM replacement with precise rolled threads for maximum grip and resistance to thread galling during high-torque lug nut installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e0.500in Over Stock Length\u003c\/th\u003e\n\u003ctd\u003eExtended shank provides clearance for wheel spacers deep drop lug nuts and wider aftermarket wheels without compromising stud engagement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chromoly Steel\u003c\/th\u003e\n\u003ctd\u003eHeat-treated to 200000 psi tensile strength handles extreme horsepower and repeated track abuse far beyond factory studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKnurled Press-Fit Design\u003c\/th\u003e\n\u003ctd\u003eParallel knurling ensures secure interference fit in hubs eliminates pull-out risk even under heavy radial and axial loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eCorrosion-resistant coating protects against rust and chemicals while maintaining clean appearance on show cars or daily drivers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this fit my 1970 Dodge Charger with aftermarket wheels? A: Yes the ARP 100-7734 kit fits 1966-1974 Chargers front and rear with M14x1.5 hubs perfect for spacers or alloys up to 0.500in thicker than stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eARP branded box 7in x 4in x 1.5in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.85 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features M14x1.5 Thread\u003c\/th\u003e\n\u003ctd\u003eDirect OEM replacement with precise rolled threads for maximum grip and resistance to thread galling during high-torque lug nut installation 0.500in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Chrysler Front\/Rear M14 .500in Over Stock Length Wheel Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7734, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235089487,"sku":"ARP100-7734","price":55.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-chrysler-frontrear-m14-_500in-over-stock-length-wheel-stud-kit-arp.jpg?v=1768369885"},{"product_id":"arp-chrysler-front-rear-m14-1-000-over-stock-wheel-stud-kit","title":"ARP Chrysler Front \/ Rear M14 1.000 Over Stock Wheel Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Chrysler Front \/ Rear M14 1.000 Over Stock Wheel Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eUpgrade your classic Mopar with the ARP 100-7735 wheel stud kit featuring M14 x 1.50 threads extended 1 inch longer than stock for deeper wheel seating.\u003c\/li\u003e\n\u003cli\u003eThis 20-piece set fits front and rear on 1962-1979 Dodge and Plymouth B and E-body models including Charger Challenger Barracuda.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7735\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eChrysler Front \/ Rear M14 1.000 Over Stock Wheel Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtended Length\u003c\/th\u003e\n\u003ctd\u003e2.638 inches overall adds 1.000 inch over stock enabling use of wheel spacers deep dish wheels or low offset setups without compromising security\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHigh Strength Material\u003c\/th\u003e\n\u003ctd\u003e8740 chromoly steel heat treated to 180000 psi tensile strength with rolled threads for fatigue resistance under extreme track loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecise Dimensions\u003c\/th\u003e\n\u003ctd\u003e0.595 inch knurl diameter 1.750 inch underhead length and 13\/16 inch hex for exact OEM replacement fit and easy installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCorrosion Protection\u003c\/th\u003e\n\u003ctd\u003eBlack oxide finish resists rust and galling for long term durability in harsh undercarriage environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit\u003c\/th\u003e\n\u003ctd\u003e20 studs cover all four corners providing balanced performance upgrade for drag street or circle track applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 1970 Dodge Challenger with disc brakes? A: Yes ARP 100-7735 fits 1970-1974 Challenger front rear with factory M14 x 1.50 hubs including disc brake setups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact ARP box 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features Extended Length\u003c\/th\u003e\n\u003ctd\u003e2.638 inches overall adds 1.000 inch over stock enabling use of wheel spacers deep dish wheels or low offset setups without compromising security\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Chrysler Front \/ Rear M14 1.000 Over Stock Wheel Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7735, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235122255,"sku":"ARP100-7735","price":55.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-chrysler-front-rear-m14-1_000-over-stock-wheel-stud-kit-arp.jpg?v=1768369887"},{"product_id":"arp-2015-2017-chevrolet-camaro-m14-500in-over-stock-length-wheel-stud-kit","title":"ARP 2015-2017 Chevrolet Camaro M14 .500in Over Stock Length Wheel Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the 2015-2017 Chevrolet Camaro M14 .500in Over Stock Length Wheel Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThe factory studs on 2015-2017 Chevrolet Camaro models with M14 x 2.0 threads that extend 0.500 inches beyond stock length.\u003c\/li\u003e\n\u003cli\u003eThe set of 20 studs delivers reliable wheel retention for high-performance driving track days or street use with wider wheels and spacers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7736\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e2015-2017 Chevrolet Camaro M14 .500in Over Stock Length Wheel Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread Size\u003c\/th\u003e\n\u003ctd\u003eM14 x 2.0 matches OEM hubs perfectly for direct replacement without modifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e2.630 inches overall with 0.500in extension over stock supports spacers deep lug wheels and aftermarket setups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged ARP 2000 alloy steel rated at 200000 psi tensile strength resists fatigue and failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eKnurled collar provides secure press-fit grip in hubs prevents loosening from vibration or heat cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eBlack oxide coating resists corrosion and eases installation with ARP thread lubricant compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this kit fit 2016-2017 Camaro SS models with factory wheels? A: Yes it fits all 2016-2017 Camaro trims including SS ZL1 and LT with direct M14 hub compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or FedEx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective ARP box 10in x 6in x 2in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.15 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features Thread Size\u003c\/th\u003e\n\u003ctd\u003eM14 x 2.0 matches OEM hubs perfectly for direct replacement without modifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 2015-2017 Chevrolet Camaro M14 .500in Over Stock Length Wheel Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7736, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235220559,"sku":"ARP100-7736","price":55.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-2015-2017-chevrolet-camaro-m14-_500in-over-stock-length-wheel-stud-kit-arp.jpg?v=1768369889"},{"product_id":"arp-10-17-chevrolet-camaro-m14-1in-over-stock-length-wheel-stud-kit","title":"ARP 10-17 Chevrolet Camaro M14 1in Over Stock Length Wheel Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the 10-17 Chevrolet Camaro M14 1in Over Stock Length Wheel Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eUpgrade your 2010-2017 Chevrolet Camaro with ARP's extended length wheel stud kit featuring M14x2.0 threads and 2.740 inch overall length.\u003c\/li\u003e\n\u003cli\u003eThis set of 20 studs provides a secure press fit for wider wheels, spacers, or deep dish rims while delivering fatigue-resistant strength under high track loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7737\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e10-17 Chevrolet Camaro M14 1in Over Stock Length Wheel Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtended Length\u003c\/th\u003e\n\u003ctd\u003e2.740 inches overall, 1 inch longer than stock to clear large brakes, spacers, and aggressive wheel offsets without compromising hub engagement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHigh-Strength Material\u003c\/th\u003e\n\u003ctd\u003eHeat-treated 8740 chromoly steel with 200,000 psi tensile strength and rolled threads that resist fatigue and thread galling during repeated track use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecise Knurl\u003c\/th\u003e\n\u003ctd\u003e0.625 inch knurl diameter and 0.393 inch shank ensure flawless press fit into Camaro hubs for zero movement under extreme cornering forces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCorrosion Protection\u003c\/th\u003e\n\u003ctd\u003eBlack oxide finish guards against rust and maintains appearance on street-driven performance cars exposed to road salt and moisture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit\u003c\/th\u003e\n\u003ctd\u003e20 studs with 13mm hex socket heads match OEM lug nut size for direct bolt-on compatibility across all four wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit 2016-2017 Camaro ZL1 with Brembo brakes? A: Yes, the 2.740 inch length clears all OEM and aftermarket big brake kits on 2010-2017 Camaro models including ZL1, SS 1LE, and base trims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or FedEx Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective plastic tube inside cardboard box, 8 x 6 x 2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.05 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features Extended Length\u003c\/th\u003e\n\u003ctd\u003e2.740 inches overall, 1 inch longer than stock to clear large brakes, spacers, and aggressive wheel offsets without compromising hub engagement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 10-17 Chevrolet Camaro M14 1in Over Stock Length Wheel Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7737, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235286095,"sku":"ARP100-7737","price":55.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-10-17-chevrolet-camaro-m14-1in-over-stock-length-wheel-stud-kit-arp.jpg?v=1768369890"},{"product_id":"arp-17-honda-civic-r-si-wheel-stud-kit","title":"ARP 17+ Honda Civic R \/ Si Wheel Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the 17+ Honda Civic R \/ Si Wheel Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese studs resist fatigue and stretching under high loads from wide wheels lowered suspensions and track abuse.\u003c\/li\u003e\n\u003cli\u003eInstall them for dependable wheel retention during spirited driving.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e100-7744\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eWheel Studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003e17+ Honda Civic R \/ Si Wheel Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chromoly Steel Construction\u003c\/th\u003e\n\u003ctd\u003eDelivers 200000 PSI tensile strength to handle extreme torque and impacts better than OEM steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRolled Threads\u003c\/th\u003e\n\u003ctd\u003eIncreases fatigue strength by up to 1000 percent over cut threads preventing thread galling and strip-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecision Knurl Diameter (0.595 in)\u003c\/th\u003e\n\u003ctd\u003eEnsures secure press fit into hub bores without distortion or loosening over time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e2.720 in Overall Length and Hex Head\u003c\/th\u003e\n\u003ctd\u003eProvides clearance for OEM and aftermarket lug nuts with easy service access\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit 2022+ Honda Civic Si models? A: No ARP 100-7744 fits only 2017-2021 10th generation Civic Type R and Si hatchback use 100-7950 for 2022+ 11th gen Si\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSecure padded box 5.25 x 3 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.10 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChromoly Steel Construction\u003c\/th\u003e\n\u003ctd\u003eDelivers 200000 PSI tensile strength to handle extreme torque and impacts better than\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOEM steel Rolled Threads\u003c\/th\u003e\n\u003ctd\u003eIncreases fatigue strength by up to 1000 percent over cut threads preventing thread galling and strip-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP wheel stud in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-evo-8-9-wheel-stud-kit-5-studs-one-wheel\"\u003eARP 03-06 Evo 8\/9 Wheel Stud Kit (5 Studs\/One Wheel)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-front-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Front Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-05-14-ford-mustang-rear-wheel-stud-kit-5-studs\"\u003eARP 05-14 Ford Mustang Rear Wheel Stud Kit (5 studs)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the 17+ Honda Civic R \/ Si Wheel Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 100-7744, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235482703,"sku":"ARP100-7744","price":55.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-17-honda-civic-r-si-wheel-stud-kit-arp.jpg?v=1768369891"},{"product_id":"arp-mini-1-6l-w11-b16-pressure-plate-bolt-kit","title":"ARP High Performance Pressure Plate Bolt Kit for Mini Cooper 1.6L W1\/B16","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the High Performance Pressure Plate Bolt Kit for Mini Cooper 1.6L W1\/B16. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure your clutch system with ARP's application-specific pressure plate bolt kit designed for 2002-2006 MINI Cooper S models equipped with the 1.6L W11B16 supercharged engine.\u003c\/li\u003e\n\u003cli\u003eThese bolts deliver reliable clamping force under extreme racing or street performance conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e101-2202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHigh Performance Pressure Plate Bolt Kit for Mini Cooper 1.6L W1\/B16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Material\u003c\/th\u003e\n\u003ctd\u003eProvides exceptional strength and durability for demanding performance environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e180,000 PSI Tensile Strength\u003c\/th\u003e\n\u003ctd\u003eHandles higher loads than stock fasteners for consistent clutch engagement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eResists corrosion and reduces friction for long-term reliability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLarge Diameter Low-Profile Design\u003c\/th\u003e\n\u003ctd\u003eEnsures optimal thread engagement and easy installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes Washers\u003c\/th\u003e\n\u003ctd\u003eComplete kit ready for immediate use with proper hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2004 MINI Cooper S R53? A: Yes it is engineered specifically for 2002-2006 MINI Cooper S Hatchback R53 with 1.6L W11B16 engines including stock and JCW variants.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority Mail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSecure compact box 6 x 4 x 1.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.25 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures 8740 Chrome Moly Material\u003c\/th\u003e\n\u003ctd\u003eProvides exceptional strength and durability for demanding performance environments 180,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the High Performance Pressure Plate Bolt Kit for Mini Cooper 1.6L W1\/B16 fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 101-2202, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235712079,"sku":"ARP101-2202","price":21.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-high-performance-pressure-plate-bolt-kit-for-mini-cooper-1_6l-w1b16-arp.jpg?v=1768369892"},{"product_id":"arp-mini-cooper-s-flywheel-bolt-kit","title":"ARP Flywheel Bolt Kit for Mini Cooper 1.6L N12, N14, N16, N18, 4-cylinder","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Flywheel Bolt Kit for Mini Cooper 1.6L N12, N14, N16, N18, 4-cylinder. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThe flywheel on Mini Cooper 1.6L N12, N14, N16, N18 4-cylinder engines found in 2007-2016 models including R56 and F56.\u003c\/li\u003e\n\u003cli\u003eBuilt with 180,000 PSI tensile strength, these bolts deliver reliable clamping force beyond OEM levels for street driving and track demands.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e101-2802\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eFlywheel Bolt Kit for Mini Cooper 1.6L N12, N14, N16, N18, 4-cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eForged aerospace-grade alloy heat-treated before thread rolling for extreme durability and fatigue resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e180,000 PSI Tensile Strength\u003c\/th\u003e\n\u003ctd\u003eHigh Performance Series rating provides secure flywheel retention under high-rpm stress\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Head Design\u003c\/th\u003e\n\u003ctd\u003eFlat 12-point heads ensure precise wrench engagement without stripping or cam-out\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLarger Shank Diameter\u003c\/th\u003e\n\u003ctd\u003eExceeds stock size for better flywheel register and increased shear strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eUSA-made with corrosion-resistant coating for long-term protection in harsh environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2012 R56 Mini Cooper S 1.6L turbo? A: Yes, designed for N12 and N14 engines in 2007-2013 R56 Cooper S and JCW models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact ARP retail box 5 x 3 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eForged aerospace-grade alloy heat-treated before thread rolling for extreme durability and fatigue resistance 180,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Flywheel Bolt Kit for Mini Cooper 1.6L N12, N14, N16, N18, 4-cylinder fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 101-2802, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235744847,"sku":"ARP101-2802","price":41.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-flywheel-bolt-kit-for-mini-cooper-1_6l-n12-n14-n16-n18-4-cylinder-arp.jpg?v=1768369894"},{"product_id":"arp-nissan-rb26-balancer-bolt-kit","title":"ARP Harmonic Damper Bolt Kit for Nissan 2.6L (RB26) Inline 6","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Harmonic Damper Bolt Kit for Nissan 2.6L (RB26) Inline 6. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThe harmonic balancer in place on Nissan RB26DETT 2.6L inline-6 engines in Skyline GT-R models.\u003c\/li\u003e\n\u003cli\u003eAs crankshaft flexes under high RPM and torque, these bolts absorb massive energy to prevent slippage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e102-2501\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHarmonic Damper Bolt Kit for Nissan 2.6L (RB26) Inline 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e190,000 PSI Tensile Strength\u003c\/th\u003e\n\u003ctd\u003eDelivers extreme clamping force to hold damper secure during peak engine loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e1\/4-Inch Thick Wide Washer\u003c\/th\u003e\n\u003ctd\u003eDistributes load evenly and increases holding power against vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtra Tall 12-Point Head\u003c\/th\u003e\n\u003ctd\u003eAccepts deep socket for precise torque without stripping risk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated alloy steel resists fatigue and maintains strength over time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProvides corrosion resistance for long-term engine bay durability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this fit all RB26DETT engines in Skyline GT-R? A: Yes, direct replacement for 1989-2002 R32 R33 R34 GT-R models with stock or aftermarket harmonic dampers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact protective box 3.5 x 2.5 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.15 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePSI Tensile Strength\u003c\/th\u003e\n\u003ctd\u003eDelivers extreme clamping force to hold damper secure during peak engine loads 1\/4-Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Harmonic Damper Bolt Kit for Nissan 2.6L (RB26) Inline 6 fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 102-2501, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235810383,"sku":"ARP102-2501","price":34.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-harmonic-damper-bolt-kit-for-nissan-2_6l-rb26-inline-6-arp.jpg?v=1768369895"},{"product_id":"arp-nissan-2-0l-rb25-and-2-6l-rb26-flexplate-bolt-kit","title":"ARP Flexplate Bolt Kit for Nissan 2.5L (RB25) \u0026 2.6L (RB26) inline 6","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Flexplate Bolt Kit for Nissan 2.5L (RB25) \u0026amp; 2.6L (RB26) inline 6. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese bolts use 8740 chromoly steel rated at 180,000 PSI tensile strength for reliable power handling in performance builds.\u003c\/li\u003e\n\u003cli\u003eThe 12-point head and larger shank diameter ensure secure fit and resistance to loosening under high torque.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e102-2901\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eFlexplate Bolt Kit for Nissan 2.5L (RB25) \u0026amp; 2.6L (RB26) inline 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Material\u003c\/th\u003e\n\u003ctd\u003eForged steel construction with 180,000 PSI tensile strength handles extreme loads in high-horsepower RB engine setups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Flat Head Design\u003c\/th\u003e\n\u003ctd\u003eProvides positive wrench engagement to prevent cam-over and stripping during installation and service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLarger Shank Diameter\u003c\/th\u003e\n\u003ctd\u003eIncreases clamp load strength and centers flexplate accurately for vibration-free operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProtects against corrosion and lubricants for long-term durability in engine environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in USA\u003c\/th\u003e\n\u003ctd\u003ePrecision machined to ARP exacting standards for consistent quality and fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit 1999-2002 R34 Skyline GT-R RB26DETT with automatic? A: Yes it directly replaces OEM bolts on R34 GT-R automatic flexplate applications for secure mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact 3 x 3 x 1 inch box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.2 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures 8740 Chrome Moly Material\u003c\/th\u003e\n\u003ctd\u003eForged steel construction with 180,000 PSI tensile strength handles extreme loads in high-horsepower RB engine setups 12-Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Flexplate Bolt Kit for Nissan 2.5L (RB25) \u0026amp; 2.6L (RB26) inline 6 fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 102-2901, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235843151,"sku":"ARP102-2901","price":33.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-flexplate-bolt-kit-for-nissan-2_5l-rb25-2_6l-rb26-inline-6-arp.jpg?v=1768369897"},{"product_id":"arp-nissan-3-0l-vg30de-dett-dohc-v6-main-stud-kit","title":"ARP Nissan 3.0L (VG30DE\/DETT( DOHC V6 Main Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Nissan 3.0L (VG30DE\/DETT( DOHC V6 Main Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eARP main stud kit strengthens bottom end clamping in Nissan 3.0L VG30DE and VG30DETT DOHC V6 engines powering 1989-1996 Nissan 300ZX models and 1992-1997 Infiniti J30.\u003c\/li\u003e\n\u003cli\u003eReplaces weak factory bolts to handle increased cylinder pressures from turbocharging boosted power or high-revving naturally aspirated setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e102-5402\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMain Stud \u0026amp; Bolt Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eNissan 3.0L (VG30DE\/DETT( DOHC V6 Main Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eARP2000 Alloy Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel composition provides 220,000 psi tensile strength to resist fatigue and stretching in high-horsepower applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecise Thread Design\u003c\/th\u003e\n\u003ctd\u003eRolled threads deliver accurate fit into Nissan VG30 blocks preventing cross-threading and ensuring even load distribution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit Contents\u003c\/th\u003e\n\u003ctd\u003eIncludes 10 main studs 12-point nuts and hardened parallel washers for full main cap girdle assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat Treatment Process\u003c\/th\u003e\n\u003ctd\u003eDouble-tempered for durability under 1000+ hp builds common in 300ZX turbo swaps and race motors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReusable Design\u003c\/th\u003e\n\u003ctd\u003eWithstands multiple engine teardowns without replacement unlike torque-to-yield OEM bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit twin-turbo 300ZX models? A: Yes it fits all 1990-1996 Nissan 300ZX VG30DETT engines providing secure main fastening for stock or upgraded turbo setups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective tray in 6 x 5 x 2 inch box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.95 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures ARP2000 Alloy Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel composition provides 220,000 psi tensile strength to resist fatigue and stretching in high-horsepower applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP main stud \u0026amp; bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-mazda-2-3l-dohc-16v-main-stud-kit\"\u003eARP 03 Mazda 2.3L DOHC 16V Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-mitsubishi-evo-main-stud-kit\"\u003eARP 03-06 Mitsubishi Evo Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-06-chevy-duramax-diesel-lbz-lmm-main-stud-kit\"\u003eARP 06+ Chevy Duramax Diesel LBZ\/LMM Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Nissan 3.0L (VG30DE\/DETT( DOHC V6 Main Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 102-5402, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861235941455,"sku":"ARP102-5402","price":83.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-nissan-3_0l-vg30dedett-dohc-v6-main-stud-kit-arp.jpg?v=1768369898"},{"product_id":"arp-honda-1-5l-l15-4cyl-main-stud-kit","title":"ARP Honda 1.5L L15 4Cyl Main Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Honda 1.5L L15 4Cyl Main Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eARP 108-5401 main stud kit upgrades the factory main bolts on Honda 1.5L L15A7 4-cylinder engines found in 2009-2013 Honda Fit models.\u003c\/li\u003e\n\u003cli\u003eThese studs provide secure clamping of main caps to withstand high cylinder pressures from boosted or high-RPM applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e108-5401\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMain Stud \u0026amp; Bolt Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHonda 1.5L L15 4Cyl Main Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chromoly Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated steel offers 200,000 psi tensile strength to resist stretching under extreme loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Nuts\u003c\/th\u003e\n\u003ctd\u003ePrecision-machined for accurate torque application and even clamping pressure on main caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eParallel Ground Washers\u003c\/th\u003e\n\u003ctd\u003eEnsure flat seating surfaces for consistent load distribution and prevent distortion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExact-Fit Threads\u003c\/th\u003e\n\u003ctd\u003eMatch OEM main cap threads perfectly for drop-in installation without machining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eResists corrosion during long-term engine use and storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit 2014 and newer Honda Fit models? A: No, it fits only 2009-2013 Honda Fit with L15A7 1.5L SOHC engine, not later L15B engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eGround shipping via UPS or FedEx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective retail box 2 x 6 x 7 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures 8740 Chromoly Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated steel offers 200,000 psi tensile strength to resist stretching under extreme loads 12-Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP main stud \u0026amp; bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-mazda-2-3l-dohc-16v-main-stud-kit\"\u003eARP 03 Mazda 2.3L DOHC 16V Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-mitsubishi-evo-main-stud-kit\"\u003eARP 03-06 Mitsubishi Evo Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-06-chevy-duramax-diesel-lbz-lmm-main-stud-kit\"\u003eARP 06+ Chevy Duramax Diesel LBZ\/LMM Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Honda 1.5L L15 4Cyl Main Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 108-5401, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861236203599,"sku":"ARP108-5401","price":119.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-honda-1_5l-l15-4cyl-main-stud-kit-arp.jpg?v=1768369899"},{"product_id":"arp-buick-350-timing-cover-and-water-pump-hex-bolt-kit","title":"ARP Buick 350 Timing Cover and Water Pump Hex Bolt Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Buick 350 Timing Cover and Water Pump Hex Bolt Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure your Buick 350 V8 engine with this ARP hex bolt kit designed specifically for timing cover and water pump mounting.\u003c\/li\u003e\n\u003cli\u003eEngineered for 1968-1981 Buick models like Skylark, GS, and Special equipped with the 350 engine.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e120-3202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eBuick 350 Timing Cover and Water Pump Hex Bolt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chromoly Steel\u003c\/th\u003e\n\u003ctd\u003eForged construction with 200,000 psi tensile strength withstands extreme engine loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat Treatment\u003c\/th\u003e\n\u003ctd\u003eProcessed to ARP 200,000 psi specs and proof-loaded to 185,000 psi for consistent performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProtects against rust and corrosion in harsh underhood environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHex Head Design\u003c\/th\u003e\n\u003ctd\u003eEnables accurate wrench fit and torque application without stripping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit\u003c\/th\u003e\n\u003ctd\u003eIncludes all required bolts for timing cover and water pump installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit Buick 400 or 455 engines? A: No, this kit matches only the Buick 350 V8 timing cover bolt pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eARP manufacturer box 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.31 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features 8740 Chromoly Steel\u003c\/th\u003e\n\u003ctd\u003eForged construction with 200,000 psi tensile strength withstands extreme engine loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Buick 350 Timing Cover and Water Pump Hex Bolt Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 120-3202, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861236334671,"sku":"ARP120-3202","price":32.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-buick-350-timing-cover-and-water-pump-hex-bolt-kit-arp.jpg?v=1768369901"},{"product_id":"arp-gm-duramax-6-6l-harmonic-balancer-bolt-kit","title":"ARP GM Duramax 6.6L Harmonic Balancer Bolt Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the GM Duramax 6.6L Harmonic Balancer Bolt Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThe factory bolt on GM Duramax 6.6L diesel engines in 2001-2016 Chevrolet Silverado GMC Sierra heavy-duty trucks and vans.\u003c\/li\u003e\n\u003cli\u003eThis kit prevents balancer slippage and failure in tuned high-horsepower applications with stock harmonic balancers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e129-2503\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eGM Duramax 6.6L Harmonic Balancer Bolt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eARP2000 Alloy Construction\u003c\/th\u003e\n\u003ctd\u003eForged from high-tensile 8740 chromoly steel with over 220,000 psi strength to withstand 1000+ hp builds.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit Contents\u003c\/th\u003e\n\u003ctd\u003eIncludes one M16 x 140mm main bolt one 12-point head nut and heavy-duty washer for full replacement.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHigh Torque Rating\u003c\/th\u003e\n\u003ctd\u003eRated for 300 ft-lbs dry or 340 ft-lbs wet torque far beyond OEM specs for rock-solid hold.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecision Machined Threads\u003c\/th\u003e\n\u003ctd\u003ePerfect fit into crankshaft nose eliminates cross-threading and ensures even clamping load.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDirect OEM Replacement\u003c\/th\u003e\n\u003ctd\u003eBolts in without modifications maintains stock balancer alignment and timing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this fit my 2011-2016 LML Duramax Silverado? A: Yes ARP 129-2503 fits all 2001-2016 GM 6.6L Duramax LB7 LLY LBZ LMM LML engines in trucks and vans.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSecure padded envelope 5 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.25 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures ARP2000 Alloy Construction\u003c\/th\u003e\n\u003ctd\u003eForged from high-tensile 8740 chromoly steel with over 220,000 psi strength to withstand 1000+ hp builds.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the GM Duramax 6.6L Harmonic Balancer Bolt Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 129-2503, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861236465743,"sku":"ARP129-2503","price":26.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-gm-duramax-6_6l-harmonic-balancer-bolt-kit-arp.jpg?v=1768369902"},{"product_id":"arp-gm-ls-hex-bellhousing-bolt-kit","title":"ARP GM LS Hex Bellhousing Bolt Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the GM LS Hex Bellhousing Bolt Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure the bellhousing on GM LS-series engines with the ARP 134-0901 Hex Bellhousing Bolt Kit.\u003c\/li\u003e\n\u003cli\u003eThis kit fits 1997 and later Chevrolet Corvettes, Camaros, Silverados, and other vehicles powered by LS1, LS2, LS6, or LS7 engines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e134-0901\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eGM LS Hex Bellhousing Bolt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eARP2000 Alloy Steel\u003c\/th\u003e\n\u003ctd\u003eForged material rated at 200,000 psi tensile strength handles extreme stress in performance applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit of 8 Bolts\u003c\/th\u003e\n\u003ctd\u003eM10 x 1.5 thread size x 70mm length ensures exact replacement for OEM hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHex Head Design\u003c\/th\u003e\n\u003ctd\u003e14mm hex heads allow use of common wrenches for straightforward installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProvides corrosion protection in harsh engine bay environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecision Machined Threads\u003c\/th\u003e\n\u003ctd\u003eGuarantees smooth engagement and even clamping force\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWhich GM engines does the 134-0901 kit fit? A: Fits all Gen III and Gen IV LS engines including LS1 LS2 LS6 LS7 in cars trucks and SUVs from 1997 to present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact box 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.31 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features ARP2000 Alloy Steel\u003c\/th\u003e\n\u003ctd\u003eForged material rated at 200,000 psi tensile strength handles extreme stress in performance applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the GM LS Hex Bellhousing Bolt Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 134-0901, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861236727887,"sku":"ARP134-0901","price":25.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-gm-ls-hex-bellhousing-bolt-kit-arp.jpg?v=1768369904"},{"product_id":"arp-gm-ls-12pt-bellhousing-bolt-kit","title":"ARP GM LS 12pt Bellhousing Bolt Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the GM LS 12pt Bellhousing Bolt Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure your LS engine bellhousing with the ARP 134-0902 bolt kit featuring eight 12-point high-strength bolts.\u003c\/li\u003e\n\u003cli\u003eDesigned for GM Gen III\/IV LS engines in vehicles like Chevrolet Corvette Camaro and Pontiac Firebird GTO these bolts provide reliable clamping force under extreme power levels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e134-0902\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eGM LS 12pt Bellhousing Bolt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eARP2000 Alloy Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel with 220000 psi tensile strength resists fatigue and stretching in high-torque setups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Head Design\u003c\/th\u003e\n\u003ctd\u003eAllows higher torque application up to 70 ft-lbs with reduced cam-out for precise installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecise Dimensions\u003c\/th\u003e\n\u003ctd\u003e7\/16-14 thread x 3.225 inch length matches OEM specs for perfect fit on LS blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProvides corrosion resistance for long-term durability in engine bays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit of 8 Bolts\u003c\/th\u003e\n\u003ctd\u003eIncludes all necessary hardware for one bellhousing installation saving time on rebuilds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit a 2001 Camaro LS1 with T56 transmission? A: Yes it directly replaces OEM bolts on all Gen III LS1 engines including 1998-2002 Camaro Firebird with manual transmissions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSecure ARP retail box 6in x 4in x 1in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.95 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures ARP2000 Alloy Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel with 220000 psi tensile strength resists fatigue and stretching in high-torque setups 12-Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the GM LS 12pt Bellhousing Bolt Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 134-0902, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861236793423,"sku":"ARP134-0902","price":27.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-gm-ls-12pt-bellhousing-bolt-kit-arp.jpg?v=1768369906"},{"product_id":"arp-chevy-ls-1-4in-flange-hex-header-bolt-kit","title":"ARP Header Bolt Kit For Chevrolet 1\/4˝ wide header flange Black Oxide Hex Head","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Header Bolt Kit For Chevrolet 1\/4˝ wide header flange Black Oxide Hex Head. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure your exhaust headers with this ARP bolt kit designed for Chevrolet small block and big block V8 engines using 1\/4-inch wide flanges.\u003c\/li\u003e\n\u003cli\u003eCrafted from 8740 chrome moly steel with black oxide finish these hex head bolts deliver 180,000 PSI tensile strength for dependable clamping under high heat and vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e134-1101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHeader Bolt Kit For Chevrolet 1\/4˝ wide header flange Black Oxide Hex Head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eDelivers 180,000 PSI tensile strength far exceeding Grade 8 hardware for lasting header retention in performance builds.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eResists corrosion from exhaust gases and road conditions while minimizing galling during installation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHex Head Design\u003c\/th\u003e\n\u003ctd\u003eAccepts standard 9\/16-inch sockets for quick torquing even in tight engine bay spaces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecise 3\/8-16 x 1.000 Inch Threads\u003c\/th\u003e\n\u003ctd\u003eMatches Chevrolet 1\/4-inch wide header flanges perfectly preventing cross-threading and ensuring full thread engagement.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in USA\u003c\/th\u003e\n\u003ctd\u003eBuilt to ARP exacting standards with rolled threads for superior fatigue resistance over cut threads.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit LS-series engines? A: No this kit fits Gen I small block 262-400 c.i.d. and Mark IV big block 366-502 c.i.d. V8s with 1\/4-inch wide header flanges. LS engines require specific ARP kits like 234-1101.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact ARP branded box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eDelivers 180,000 PSI tensile strength far exceeding Grade 8 hardware for lasting header retention in performance builds.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Header Bolt Kit For Chevrolet 1\/4˝ wide header flange Black Oxide Hex Head fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 134-1101, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861236858959,"sku":"ARP134-1101","price":31.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-header-bolt-kit-for-chevrolet-14-wide-header-flange-black-oxide-hex-head-arp.jpg?v=1768369907"},{"product_id":"arp-chevy-ls-3-8in-flange-hex-header-bolt-kit","title":"ARP Header Bolt Kit For Chevrolet 3\/8˝ wide header flange Black Oxide Hex Head","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Header Bolt Kit For Chevrolet 3\/8˝ wide header flange Black Oxide Hex Head. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure exhaust headers on Chevrolet Small Block V8 engines using this ARP bolt kit designed for 3\/8-inch wide flanges.\u003c\/li\u003e\n\u003cli\u003eCrafted from 8740 chrome moly steel with black oxide finish, these hex head bolts deliver 180,000 PSI tensile strength to maintain tight seals under high heat and vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e134-1102\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHeader Bolt Kit For Chevrolet 3\/8˝ wide header flange Black Oxide Hex Head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eDelivers 180,000 PSI tensile strength, exceeding Grade 8 hardware for reliable clamping force on headers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eResists corrosion and galling in hot exhaust environments for long-lasting performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHex Head Design\u003c\/th\u003e\n\u003ctd\u003eProvides straightforward socket access near header pipes for faster installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSA Manufactured\u003c\/th\u003e\n\u003ctd\u003eBuilt to precise tolerances ensuring consistent fit and durability in racing applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeader-Specific Engineering\u003c\/th\u003e\n\u003ctd\u003eMatches 3\/8-inch wide Chevrolet Small Block flanges for leak-free exhaust sealing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWhich Chevrolet engines does this header bolt kit fit? A: Fits all Chevrolet Small Block V8 engines 262-400 cubic inches with 3\/8-inch wide header flanges from 1955-2002 including 283, 327, 350, and 383 stroker builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact protective box 6 x 4 x 2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.75 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eDelivers 180,000 PSI tensile strength, exceeding Grade 8 hardware for reliable clamping force on headers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Header Bolt Kit For Chevrolet 3\/8˝ wide header flange Black Oxide Hex Head fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 134-1102, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861236891727,"sku":"ARP134-1102","price":31.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-header-bolt-kit-for-chevrolet-38-wide-header-flange-black-oxide-hex-head-arp.jpg?v=1768369909"},{"product_id":"arp-sbc-6-2l-lt1-12pt-header-bolt-kit","title":"ARP Header Bolt Kit For Chevrolet 3\/8˝ wide header flange - 6.2L (LT1\/LT4) Black Oxide 12-Pt Head","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Header Bolt Kit For Chevrolet 3\/8˝ wide header flange - 6.2L (LT1\/LT4) Black Oxide 12-Pt Head. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThis kit fits 2014-2019 Corvette, 2016-2024 Camaro, and 2016-2019 Cadillac CTS-V models.\u003c\/li\u003e\n\u003cli\u003eBlack oxide 12-point bolts from 8740 chrome moly withstand extreme heat and vibration for leak-free performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e134-1103\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHeader Bolt Kit For Chevrolet 3\/8˝ wide header flange - 6.2L (LT1\/LT4) Black Oxide 12-Pt Head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eProvides 180,000 PSI tensile strength, far exceeding Grade 8 hardware for header retention under high boost and heat.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eResists corrosion in harsh exhaust environments while maintaining a durable low-profile appearance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Heads\u003c\/th\u003e\n\u003ctd\u003eAllow socket access near tight header pipes for straightforward installation without stripping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSA Manufactured\u003c\/th\u003e\n\u003ctd\u003ePrecision machined for exact flange fit on LT-series cylinder heads.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Bolt Kit\u003c\/th\u003e\n\u003ctd\u003eIncludes all necessary bolts for full header replacement or upgrade on 6.2L LT1 LT4 setups.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTorque to ARP specifications\u003c\/th\u003e\n\u003ctd\u003e25-30 ft-lbs depending on header gasket. use thread lube.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this kit fit 2015-2019 Corvette Z06 LT4? A: Yes, ARP 134-1103 bolts match the 3\/8-inch header flanges on all Gen V LT1 LT4 cylinder heads including Corvette Z06 LT4 models.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSecure ARP box 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.70 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Header Bolt Kit For Chevrolet 3\/8˝ wide header flange - 6.2L (LT1\/LT4) Black Oxide 12-Pt Head fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 134-1103, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861236957263,"sku":"ARP134-1103","price":27.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-header-bolt-kit-for-chevrolet-38-wide-header-flange-6_2l-lt1lt4-black-oxide-12-pt-head-arp.jpg?v=1768369910"},{"product_id":"arp-sbc-6-2l-lt1-hex-header-bolt-kit","title":"ARP Header Bolt Kit For Chevrolet 3\/8˝ wide header flange - 6.2L (LT1\/LT4) Black Oxide Hex Head","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Header Bolt Kit For Chevrolet 3\/8˝ wide header flange - 6.2L (LT1\/LT4) Black Oxide Hex Head. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eARP Header Bolt Kit 134-1104 delivers secure fastening for exhaust headers on 6.2L LT1 and LT4 engines in Chevrolet Corvette Camaro and Cadillac CTS-V models.\u003c\/li\u003e\n\u003cli\u003eCrafted for 3\/8-inch wide header flanges these black oxide hex head bolts withstand extreme heat and vibration in performance applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e134-1104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHeader Bolt Kit For Chevrolet 3\/8˝ wide header flange - 6.2L (LT1\/LT4) Black Oxide Hex Head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eHigh-strength alloy resists fatigue and maintains clamp load under high exhaust temperatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProvides corrosion resistance in harsh engine bay environments without flaking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e180,000 PSI Tensile Strength\u003c\/th\u003e\n\u003ctd\u003eFar exceeds Grade 8 bolts ensuring headers stay locked during aggressive driving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHex Head Design\u003c\/th\u003e\n\u003ctd\u003eAccepts standard sockets for quick precise installation near tight header pipes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSA Made Precision\u003c\/th\u003e\n\u003ctd\u003eARP quality control guarantees consistent threading and fit for LT-series cylinder heads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWhich vehicles and engines does this kit fit? A: Fits 6.2L LT1\/LT4 engines in 2014-2019 Chevy Corvette Stingray Grand Sport Z06, 2016-2023 Camaro SS ZL1, and 2016-2019 Cadillac CTS-V with 3\/8-inch wide header flanges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective tray in 6 x 3.75 x 1 inch box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.40 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eHigh-strength alloy resists fatigue and maintains clamp load under high exhaust temperatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Header Bolt Kit For Chevrolet 3\/8˝ wide header flange - 6.2L (LT1\/LT4) Black Oxide Hex Head fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 134-1104, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861237022799,"sku":"ARP134-1104","price":26.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-header-bolt-kit-for-chevrolet-38-wide-header-flange-6_2l-lt1lt4-black-oxide-hex-head-arp.jpg?v=1787763814"},{"product_id":"arp-sbc-genii-ls-1-4-flange-12pt-header-bolt-kit","title":"ARP Header Bolt Kit For Chevrolet 1\/4˝ wide header flange Black Oxide 12-Pt Head","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Header Bolt Kit For Chevrolet 1\/4˝ wide header flange Black Oxide 12-Pt Head. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure your exhaust headers with the ARP Header Bolt Kit designed for Chevrolet Small Block V8 engines equipped with 1\/4-inch wide flanges from 1955 to current models.\u003c\/li\u003e\n\u003cli\u003eThese bolts feature 8740 chrome moly construction with black oxide finish and 12-point heads for reliable clamping force rated at 180,000 PSI tensile strength, exceeding Grade 8 hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e134-1201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHeader Bolt Kit For Chevrolet 1\/4˝ wide header flange Black Oxide 12-Pt Head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Material\u003c\/th\u003e\n\u003ctd\u003eDelivers heat resistance and durability for long-term header retention in racing and street applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e180,000 PSI Tensile Strength\u003c\/th\u003e\n\u003ctd\u003eProvides clamping power that resists loosening under extreme exhaust temperatures and engine vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProtects against corrosion and galling for sustained performance in harsh underhood environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Head Design\u003c\/th\u003e\n\u003ctd\u003eEnables precise wrenching with sockets that fit closely to header tubes without slippage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSA Made\u003c\/th\u003e\n\u003ctd\u003eEnsures consistent quality and precision threading for Chevrolet Small Block header compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWhat material and finish are used on these header bolts? A: Constructed from 8740 chrome moly steel with black oxide finish for superior heat tolerance, corrosion protection, and thread preservation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective box 1 x 5 x 7 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.95 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures 8740 Chrome Moly Material\u003c\/th\u003e\n\u003ctd\u003eDelivers heat resistance and durability for long-term header retention in racing and street applications 180,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Header Bolt Kit For Chevrolet 1\/4˝ wide header flange Black Oxide 12-Pt Head fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 134-1201, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861237055567,"sku":"ARP134-1201","price":31.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-header-bolt-kit-for-chevrolet-14-wide-header-flange-black-oxide-12-pt-head-arp.jpg?v=1768369913"},{"product_id":"arp-sbc-geniii-ls-3-8-flange-12pt-header-bolt-kit","title":"ARP SBC\/GENIII LS 3\/8 Flange 12pt Header Bolt Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the SBC\/GENIII LS 3\/8 Flange 12pt Header Bolt Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure exhaust headers on Small Block Chevy engines from 1955-2013 and Gen III LS engines from 1997-2007 with the ARP SBC\/GENIII LS 3\/8 Flange 12pt Header Bolt Kit.\u003c\/li\u003e\n\u003cli\u003eThis complete kit of twelve 3\/8-16 x 1-inch bolts fits 3\/8-inch thick flanges on performance headers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e134-1202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eSBC\/GENIII LS 3\/8 Flange 12pt Header Bolt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChromoly Steel Build\u003c\/th\u003e\n\u003ctd\u003eForged 8740 alloy heat-treated to 180,000 psi tensile strength resists fatigue from exhaust heat cycles and torque loads.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Head Design\u003c\/th\u003e\n\u003ctd\u003eDelivers firm grip during installation allowing full torque application without cam-out or rounding.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eShields against rust and seizing in humid or salty environments for repeated removal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecision 3\/8-16 Threads\u003c\/th\u003e\n\u003ctd\u003eRolled threads provide smooth engagement and consistent preload on 3\/8-inch flanges.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit of 12 Bolts\u003c\/th\u003e\n\u003ctd\u003eExact quantity for both cylinder banks on V8 SBC and Gen III LS header setups.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this fit Gen IV LS engines? A: Designed for Gen III LS and SBC with 3\/8-inch flanges. Gen IV headers often use thicker flanges measure yours to confirm compatibility.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eOriginal ARP box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features Chromoly Steel Build\u003c\/th\u003e\n\u003ctd\u003eForged 8740 alloy heat-treated to 180,000 psi tensile strength resists fatigue from exhaust heat cycles and torque loads. 12-Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the SBC\/GENIII LS 3\/8 Flange 12pt Header Bolt Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 134-1202, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861237121103,"sku":"ARP134-1202","price":32.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-sbcgeniii-ls-38-flange-12pt-header-bolt-kit-arp.jpg?v=1768369915"},{"product_id":"arp-ls-w-12in-pressure-plate-bolt-kit","title":"ARP LS w\/ 12in Pressure Plate Bolt Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the LS w\/ 12in Pressure Plate Bolt Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese bolts prevent slippage and failure under extreme loads.\u003c\/li\u003e\n\u003cli\u003eA: Yes fits all GM LS-series engines LS1 through LS9 when using 12-inch diameter pressure plates regardless of transmission or vehicle Q: What material are these bolts made from?\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e134-2203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eLS w\/ 12in Pressure Plate Bolt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel with proprietary heat treatment provides tensile strength over 200000 psi for demanding power levels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Head Design\u003c\/th\u003e\n\u003ctd\u003eEnsures positive engagement with 13mm socket reducing rounding and enabling accurate torquing to 22-25 ft-lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecise Thread Fit\u003c\/th\u003e\n\u003ctd\u003eM10 x 1.5 threads match OEM specs with 1.740-inch length for flush installation on flywheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardened Parallel Washers\u003c\/th\u003e\n\u003ctd\u003eIncluded washers distribute load evenly preventing plate distortion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e6-Piece Kit\u003c\/th\u003e\n\u003ctd\u003eComplete set covers all pressure plate mounting points with ARP2000 marking for authenticity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my LS swap with 12-inch clutch? A: Yes fits all GM LS-series engines LS1 through LS9 when using 12-inch diameter pressure plates regardless of transmission or vehicle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact box 3 x 5 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.20 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel with proprietary heat treatment provides tensile strength over 200000 psi for demanding power levels 12-Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the LS w\/ 12in Pressure Plate Bolt Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 134-2203, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861237481551,"sku":"ARP134-2203","price":18.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-ls-w-12in-pressure-plate-bolt-kit-arp.jpg?v=1768369916"},{"product_id":"arp-small-block-chrysler-5-7-6-1l-hemi-hex-aluminum-intake-manifold-bolt-kit","title":"ARP Hex Head Black Oxide Intake Manifold Bolts for Chrysler 5.7L \u0026 6.1L Hemi with aluminum intake manifo","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Hex Head Black Oxide Intake Manifold Bolts for Chrysler 5.7L \u0026amp; 6.1L Hemi with aluminum intake manifo. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eARP Hex Head Black Oxide Intake Manifold Bolts secure aluminum intake manifolds on 2003-2010 Chrysler Dodge Jeep vehicles with 5.7L and 6.1L Hemi engines.\u003c\/li\u003e\n\u003cli\u003eThese bolts replace stock hardware to eliminate leaks and ensure consistent sealing under high-performance conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e144-2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHex Head Black Oxide Intake Manifold Bolts for Chrysler 5.7L \u0026amp; 6.1L Hemi with aluminum intake manifo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e180,000 PSI Rating\u003c\/th\u003e\n\u003ctd\u003eDelivers strong clamping force to hold gaskets tight against heat pressure and vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Steel\u003c\/th\u003e\n\u003ctd\u003eForged alloy construction resists fatigue for dependable long-term engine use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProtects against rust and corrosion in harsh underhood environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecision Rolled Threads\u003c\/th\u003e\n\u003ctd\u003eAllows smooth installation without galling while enabling even torque distribution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWide Flange and Washers\u003c\/th\u003e\n\u003ctd\u003eSpreads load uniformly to safeguard manifold surfaces and promote leak-free performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWhat material and strength do these bolts have? A: Made from 8740 chrome moly steel with nominal 180,000 PSI tensile strength and black oxide finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eOriginal ARP box approximately 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.41 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePSI Rating\u003c\/th\u003e\n\u003ctd\u003eDelivers strong clamping force to hold gaskets tight against heat pressure and vibration 8740\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Hex Head Black Oxide Intake Manifold Bolts for Chrysler 5.7L \u0026amp; 6.1L Hemi with aluminum intake manifo fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 144-2003, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861239447631,"sku":"ARP144-2003","price":37.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-hex-head-black-oxide-intake-manifold-bolts-for-chrysler-5_7l-6_1l-hemi-with-aluminum-intake-manifo-arp.jpg?v=1787763942"},{"product_id":"arp-jeep-4-0l-inline-6-flywheel-bolt-kit","title":"ARP Flywheel Bolt Kit for Jeep 4.0L inline 6cyl","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Flywheel Bolt Kit for Jeep 4.0L inline 6cyl. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure your Jeep 4.0L inline-six engine with this ARP flywheel bolt kit designed for 1987-2006 models including Cherokee Wrangler and Grand Cherokee.\u003c\/li\u003e\n\u003cli\u003eThese bolts replace weak factory hardware to handle high engine torque and RPM.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e146-2801\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eFlywheel Bolt Kit for Jeep 4.0L inline 6cyl\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHigh Strength Rating\u003c\/th\u003e\n\u003ctd\u003e180000 PSI tensile strength exceeds OEM bolts for resistance to fatigue and failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged 8740 chrome moly steel provides toughness and consistent performance under load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Design\u003c\/th\u003e\n\u003ctd\u003eExclusive 12-point flat head allows higher torque application without slipping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShank Diameter\u003c\/th\u003e\n\u003ctd\u003eLarger than stock size improves flywheel registration and clamping force\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish and Hardware\u003c\/th\u003e\n\u003ctd\u003eBlack oxide coating resists corrosion kit includes washers and nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWhich Jeep 4.0L models does this kit fit? A: Fits 1987-2006 Jeep 4.0L inline-six in Cherokee XJ Wrangler YJ\/TJ Comanche Grand Cherokee ZJ\/WJ direct bolt-on replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact box 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features High Strength Rating\u003c\/th\u003e\n\u003ctd\u003e180000 PSI tensile strength exceeds OEM bolts for resistance to fatigue and failure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Flywheel Bolt Kit for Jeep 4.0L inline 6cyl fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 146-2801, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861239644239,"sku":"ARP146-2801","price":29.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-flywheel-bolt-kit-for-jeep-4_0l-inline-6cyl-arp.jpg?v=1768369919"},{"product_id":"arp-jeep-4-0l-inline-6cyl-head-bolt-kit","title":"ARP Cylinder Head Bolt Kit for Jeep 4.0L (242 cid) inline 6 - 1\/2˝","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Cylinder Head Bolt Kit for Jeep 4.0L (242 cid) inline 6 - 1\/2˝. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThis ARP cylinder head bolt kit delivers secure clamping for Jeep 4.0L inline-six engines in models from 1987 to 2006.\u003c\/li\u003e\n\u003cli\u003ePrecision 1\/2-inch bolts from 8740 chrome moly steel resist fatigue in high-compression builds or daily drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e146-3601\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHead Stud \u0026amp; Bolt Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eCylinder Head Bolt Kit for Jeep 4.0L (242 cid) inline 6 - 1\/2˝\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e8740 chrome moly steel withstands extreme cylinder pressures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrength\u003c\/th\u003e\n\u003ctd\u003e180,000 PSI rating exceeds Grade 8 bolts by 15 percent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead Design\u003c\/th\u003e\n\u003ctd\u003eWide flanged heads enable retorquing without valve train removal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFastener Specs\u003c\/th\u003e\n\u003ctd\u003e1\/2”-20 thread x 4.000-inch under head length quantity 10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded Hardware\u003c\/th\u003e\n\u003ctd\u003eHardened parallel-ground washers ensure precise torque application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this fit 2004 Grand Cherokee 4.0L? A: Yes covers all WJ Grand Cherokee models 1999-2004 with 4.0L engine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSecure ARP box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features Material\u003c\/th\u003e\n\u003ctd\u003e8740 chrome moly steel withstands extreme cylinder pressures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP head stud \u0026amp; bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-head-stud-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Head Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-02-06-mini-cooper-head-bolt-kit\"\u003eARP 02-06 Mini Cooper Head Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-02-06-mini-cooper-s-head-stud-kit\"\u003eARP 02-06 Mini Cooper S Head Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Cylinder Head Bolt Kit for Jeep 4.0L (242 cid) inline 6 - 1\/2˝ fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 146-3601, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861239742543,"sku":"ARP146-3601","price":66.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-cylinder-head-bolt-kit-for-jeep-4_0l-242-cid-inline-6-12-arp.jpg?v=1768369921"},{"product_id":"arp-jeep-4-0l-inline-6-head-stud-kit","title":"ARP Cylinder Head Stud Kit for Jeep 4.0L inline 6, 1\/2˝ (two lengths)","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Cylinder Head Stud Kit for Jeep 4.0L inline 6, 1\/2˝ (two lengths). Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese 1\/2˝ studs come in two lengths for precise intake and exhaust side fitment.\u003c\/li\u003e\n\u003cli\u003eThey deliver consistent clamping force to maintain head gasket integrity under high boost or high compression builds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e146-4201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHead Stud \u0026amp; Bolt Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eCylinder Head Stud Kit for Jeep 4.0L inline 6, 1\/2˝ (two lengths)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Alloy\u003c\/th\u003e\n\u003ctd\u003eHeat-treated to 190,000 PSI tensile strength for durability beyond aircraft-grade steels used in lesser kits.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePost-Heat-Treat Thread Rolling\u003c\/th\u003e\n\u003ctd\u003eProvides 2000% greater fatigue resistance compared to pre-heat-treat threading common in other studs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenterless Ground\u003c\/th\u003e\n\u003ctd\u003eEnsures concentricity so cylinder heads and gaskets align perfectly without binding or misalignment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUndercut Design\u003c\/th\u003e\n\u003ctd\u003eEqualizes stretch across studs for uniform clamping that accounts for head gasket compression and resists gasket blowout.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eMade in USA with ARP stamp on each stud for verified quality and corrosion resistance.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit includes 10 studs\u003c\/th\u003e\n\u003ctd\u003eshorter 7.800˝ and longer 12.250˝ lengths with 1\/2˝-20 threads for complete cylinder head fastening.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this kit fit 1999-2004 Jeep Grand Cherokee WJ 4.0L? A: No, ARP 146-4201 fits 1987-2006 models listed. WJ requires 146-4301 kit due to different stud lengths.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or FedEx Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eOriginal ARP kit box, 12.5 x 8.5 x 2.5 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3.85 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP head stud \u0026amp; bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-head-stud-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Head Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-02-06-mini-cooper-head-bolt-kit\"\u003eARP 02-06 Mini Cooper Head Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-02-06-mini-cooper-s-head-stud-kit\"\u003eARP 02-06 Mini Cooper S Head Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Cylinder Head Stud Kit for Jeep 4.0L inline 6, 1\/2˝ (two lengths) fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 146-4201, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861239873615,"sku":"ARP146-4201","price":137.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-cylinder-head-stud-kit-for-jeep-4_0l-inline-6-12-two-lengths-arp.jpg?v=1768369922"},{"product_id":"arp-jeep-4-0l-inline-6-cyl-main-stud-kit","title":"ARP Jeep 4.0L Inline 6 Cyl Main Stud Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Jeep 4.0L Inline 6 Cyl Main Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eARP2000 alloy construction handles extreme cylinder pressures in high-performance and boosted applications delivering dependable clamping force.\u003c\/li\u003e\n\u003cli\u003eA: Yes ARP 146-5401 fits all 1987-2006 Jeep 4.0L inline 6 engines including TJ Wrangler models with no modifications required Q: What material are the studs made from?\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e146-5401\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMain Stud \u0026amp; Bolt Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eJeep 4.0L Inline 6 Cyl Main Stud Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eARP2000 Alloy Steel\u003c\/th\u003e\n\u003ctd\u003eForged studs with 220000 psi tensile strength and 135000 psi yield strength resist fatigue and stretching for long-term engine reliability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Nuts and Hardened Washers\u003c\/th\u003e\n\u003ctd\u003eIncluded precision components allow accurate torquing and prevent loosening under vibration and heat cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProvides corrosion resistance and reduces galling during installation on aluminum blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExact OEM Dimensions\u003c\/th\u003e\n\u003ctd\u003eM11 x 1.5mm main studs match factory locations for drop-in replacement without block modifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHigh Clamp Load\u003c\/th\u003e\n\u003ctd\u003eSupports 1000+ horsepower builds while maintaining main bearing alignment and oil clearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 1999 Jeep Wrangler 4.0L TJ? A: Yes ARP 146-5401 fits all 1987-2006 Jeep 4.0L inline 6 engines including TJ Wrangler models with no modifications required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCardboard box 2.25 x 6 x 7.75 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.1 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features ARP2000 Alloy Steel\u003c\/th\u003e\n\u003ctd\u003eForged studs with 220000 psi tensile strength and 135000 psi yield strength resist fatigue and stretching for long-term engine reliability 12-Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP main stud \u0026amp; bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-mazda-2-3l-dohc-16v-main-stud-kit\"\u003eARP 03 Mazda 2.3L DOHC 16V Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-mitsubishi-evo-main-stud-kit\"\u003eARP 03-06 Mitsubishi Evo Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-06-chevy-duramax-diesel-lbz-lmm-main-stud-kit\"\u003eARP 06+ Chevy Duramax Diesel LBZ\/LMM Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Jeep 4.0L Inline 6 Cyl Main Stud Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 146-5401, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861239971919,"sku":"ARP146-5401","price":94.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-jeep-4_0l-inline-6-cyl-main-stud-kit-arp.jpg?v=1768369924"},{"product_id":"arp-dodge-cummins-5-97l-12v-24v-balancer-bolt-kit","title":"ARP Dodge Cummins 5.97L 12V\/24V Balancer Bolt Kit","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Dodge Cummins 5.97L 12V\/24V Balancer Bolt Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure your Dodge Cummins harmonic balancer with the ARP 147-2502 bolt kit designed for 5.9L 12-valve and 24-valve diesel engines in 1989-2002 Ram trucks.\u003c\/li\u003e\n\u003cli\u003eThis kit replaces the factory bolt prone to stretching and breaking under high stress or boost.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e147-2502\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eDodge Cummins 5.97L 12V\/24V Balancer Bolt Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eARP2000 Alloy Steel\u003c\/th\u003e\n\u003ctd\u003eForged material delivers 220,000 psi tensile strength to handle extreme torque and vibration in modified Cummins engines.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Hardware Set\u003c\/th\u003e\n\u003ctd\u003eIncludes 5\/8\"-18 x 3.800\" main bolt, 5\/16\"-18 x 1.000\" stud, three 5\/16\"-24 x 1.000\" socket head capscrews, and heavy-duty washer for full replacement.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHigh Torque Capacity\u003c\/th\u003e\n\u003ctd\u003eRated for 250 ft-lbs installation torque to lock balancer firmly against crankshaft under high horsepower loads.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFatigue Resistance\u003c\/th\u003e\n\u003ctd\u003eResists loosening from harmonic vibrations common in 12V\/24V Cummins builds with cams, injectors, or turbos.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCorrosion Protection\u003c\/th\u003e\n\u003ctd\u003eBlack oxide finish guards against rust in harsh diesel environments for long-term durability.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit work on both 12V and 24V 5.9L Cummins engines? A: Yes, ARP 147-2502 fits all 1989-2002 Dodge Cummins 5.9L 12-valve and 24-valve diesel engines in listed Ram models.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact protective box 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.2 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features ARP2000 Alloy Steel\u003c\/th\u003e\n\u003ctd\u003eForged material delivers 220,000 psi tensile strength to handle extreme torque and vibration in modified Cummins engines.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Dodge Cummins 5.97L 12V\/24V Balancer Bolt Kit fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 147-2502, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861240070223,"sku":"ARP147-2502","price":38.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-dodge-cummins-5_97l-12v24v-balancer-bolt-kit-arp.jpg?v=1768369925"},{"product_id":"arp-dodge-cummins-6-7l-24v-balancer-bolt-kit","title":"ARP Harmonic Damper Bolt Kit Dodge\/Cummins 5.9L \u0026 6.7L 24V (2008 \u0026 later) (4 pcs.)","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Harmonic Damper Bolt Kit Dodge\/Cummins 5.9L \u0026amp; 6.7L 24V (2008 \u0026amp; later) (4 pcs.). Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThe harmonic balancer in place on Dodge Ram trucks with Cummins 5.9L and 6.7L 24V common rail diesel engines from 2003 onward.\u003c\/li\u003e\n\u003cli\u003eThese high-strength bolts absorb massive kinetic energy from crankshaft twist and flex for reliable engine operation under high loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e147-2503\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHarmonic Damper Bolt Kit Dodge\/Cummins 5.9L \u0026amp; 6.7L 24V (2008 \u0026amp; later) (4 pcs.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e190,000 PSI Tensile Strength\u003c\/th\u003e\n\u003ctd\u003eHandles extreme torque and vibration without yielding for long-term durability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eForged steel alloy provides superior fatigue resistance in high-stress diesel applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eResists corrosion and eases installation while maintaining a professional appearance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e1\/4-Inch Thick Wide-Area Washer\u003c\/th\u003e\n\u003ctd\u003eDistributes clamping load evenly to protect surfaces and ensure secure fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtra-Tall 12-Point Head\u003c\/th\u003e\n\u003ctd\u003eAccepts deep 3\/4-inch socket to prevent stripping and simplify wrenching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this kit fit 2007.5-2008 early 6.7L Cummins engines? A: Yes ARP 147-2503 fits all 2007.5+ 6.7L 24V common rail Cummins as well as 2003-2007 5.9L 24V common rail in Dodge Ram trucks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground \/ USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eARP protective box 5 x 3.5 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.31 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePSI Tensile Strength\u003c\/th\u003e\n\u003ctd\u003eHandles extreme torque and vibration without yielding for long-term durability 8740\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Harmonic Damper Bolt Kit Dodge\/Cummins 5.9L \u0026amp; 6.7L 24V (2008 \u0026amp; later) (4 pcs.) fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 147-2503, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861240102991,"sku":"ARP147-2503","price":38.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-harmonic-damper-bolt-kit-dodgecummins-5_9l-6_7l-24v-2008-later-4-pcs_-arp.jpg?v=1768369927"},{"product_id":"arp-ford-6-4l-diesel-balancer-bolt-kit","title":"ARP Harmonic Damper Kit for Ford 6.0L \u0026 6.4L Power Stroke - bolt \u0026 washer","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Harmonic Damper Kit for Ford 6.0L \u0026amp; 6.4L Power Stroke - bolt \u0026amp; washer. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThe ARP Harmonic Damper Kit delivers a high-strength bolt and washer to lock the harmonic damper on Ford F-Series Super Duty trucks and Excursion models powered by 6.0L or 6.4L Power Stroke diesel engines from 2003 to\u003c\/li\u003e\n\u003cli\u003eCrankshaft flex and twist generate massive kinetic energy that this kit absorbs while providing unyielding clamping force to prevent slippage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e150-2505\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHarmonic Damper Kit for Ford 6.0L \u0026amp; 6.4L Power Stroke - bolt \u0026amp; washer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e190,000 PSI Tensile Strength\u003c\/th\u003e\n\u003ctd\u003eDelivers extreme clamping load to keep the harmonic damper firmly in place during high-rpm operation and heavy towing.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated alloy resists fatigue and maintains integrity in hot oily engine environments.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProvides corrosion protection for reliable performance in harsh underhood conditions.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e1\/4-Inch Thick Wide-Area Washer\u003c\/th\u003e\n\u003ctd\u003eSpreads clamping pressure evenly across the damper hub to avoid distortion and ensure precise alignment.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtra Tall 12-Point Bolt Head\u003c\/th\u003e\n\u003ctd\u003eAccepts deep impact sockets for secure torquing without stripping even under maximum effort.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2006 F-350 6.0L Power Stroke? A: Yes it fits all 2003-2007 Ford Super Duty trucks with 6.0L Power Stroke and 2008-2010 models with 6.4L including F-250 F-350 F-450 F-550 and 2003-2005 Excursion.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact retail box 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.38 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePSI Tensile Strength\u003c\/th\u003e\n\u003ctd\u003eDelivers extreme clamping load to keep the harmonic damper firmly in place during high-rpm operation and heavy towing. 8740\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Harmonic Damper Kit for Ford 6.0L \u0026amp; 6.4L Power Stroke - bolt \u0026amp; washer fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 150-2505, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861240266831,"sku":"ARP150-2505","price":43.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-harmonic-damper-kit-for-ford-6_0l-6_4l-power-stroke-bolt-washer-arp.jpg?v=1768369928"},{"product_id":"arp-ford-6-4l-diesel-flexplate-bolt-kit","title":"ARP Flexplate Bolt Kit for Ford 6.0L \u0026 6.4L Power Stroke diesel","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Flexplate Bolt Kit for Ford 6.0L \u0026amp; 6.4L Power Stroke diesel. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThis kit fits 2003-2010 Super Duty F-250 F-350 F-450 F-550 and Excursion models preventing common stock bolt failures under high torque loads.\u003c\/li\u003e\n\u003cli\u003eEight high-strength bolts deliver reliable power transfer in demanding diesel applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e150-2902\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eFlexplate Bolt Kit for Ford 6.0L \u0026amp; 6.4L Power Stroke diesel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePro Series Strength\u003c\/th\u003e\n\u003ctd\u003eRated at 190,000 PSI tensile strength exceeds OEM bolts for failure resistance during high-horsepower operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Head Design\u003c\/th\u003e\n\u003ctd\u003eFlat 12-point heads provide secure wrench engagement and prevent cam-out during installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLarger Shank Diameter\u003c\/th\u003e\n\u003ctd\u003eIncreased diameter improves flywheel register and overall clamping force over stock hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated alloy steel ensures maximum fatigue resistance and longevity in diesel engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eCorrosion-resistant coating made in USA for durability in harsh underhood environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2006 F-350 dually with 6.0L Power Stroke? A: Yes ARP 150-2902 fits all 2003-2007 Ford F-350 Super Duty models with 6.0L diesel automatic transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact box measures 1.75 x 5.25 x 6.75 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.38 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features Pro Series Strength\u003c\/th\u003e\n\u003ctd\u003eRated at 190,000 PSI tensile strength exceeds OEM bolts for failure resistance during high-horsepower operation 12-Point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Flexplate Bolt Kit for Ford 6.0L \u0026amp; 6.4L Power Stroke diesel fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 150-2902, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861240528975,"sku":"ARP150-2902","price":66.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-flexplate-bolt-kit-for-ford-6_0l-6_4l-power-stroke-diesel-arp.jpg?v=1768369929"},{"product_id":"arp-ford-6-0l-main-stud-kit","title":"ARP Main Stud Kit for Ford Ford 6.0L Power Stroke","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Main Stud Kit for Ford Ford 6.0L Power Stroke. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThe factory main bolts in 2003-2007 Ford F-250, F-350, F-450, F-550 Super Duty pickups and chassis cabs plus Excursion models with 6.0L Power Stroke diesel engines.\u003c\/li\u003e\n\u003cli\u003eIt prevents main cap walk and fretting while safeguarding engine block threads during high-torque operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e150-5801\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMain Stud \u0026amp; Bolt Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eMain Stud Kit for Ford Ford 6.0L Power Stroke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated in-house to 190,000 psi tensile strength for durability under high cylinder pressures in tuned 6.0L engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecision J-Form Threads\u003c\/th\u003e\n\u003ctd\u003eRolled after heat treatment to deliver threads 2000% stronger than off-the-shelf fasteners, reducing stretch and failure risk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit Contents\u003c\/th\u003e\n\u003ctd\u003eIncludes parallel-ground hardened washers and premium nuts for secure assembly and even clamping force\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWindage Tray Compatibility\u003c\/th\u003e\n\u003ctd\u003eFeatures standoff studs with serrated lock nuts on select applications to lock trays firmly in place and control oil flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProvides corrosion resistance and a professional look inside the engine oil pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWhat material are the studs made from? A: High-grade 8740 chrome moly steel heat-treated to 190,000 psi, with rolled J-form threads for superior fatigue resistance over OEM bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSturdy cardboard box measuring 12\" x 8\" x 2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.85 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated in-house to 190,000 psi tensile strength for durability under high cylinder pressures in tuned 6.0L engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP main stud \u0026amp; bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-mazda-2-3l-dohc-16v-main-stud-kit\"\u003eARP 03 Mazda 2.3L DOHC 16V Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-mitsubishi-evo-main-stud-kit\"\u003eARP 03-06 Mitsubishi Evo Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-06-chevy-duramax-diesel-lbz-lmm-main-stud-kit\"\u003eARP 06+ Chevy Duramax Diesel LBZ\/LMM Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Main Stud Kit for Ford Ford 6.0L Power Stroke fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 150-5801, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861240561743,"sku":"ARP150-5801","price":418.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-main-stud-kit-for-ford-ford-6_0l-power-stroke-arp.jpg?v=1768369931"},{"product_id":"arp-ford-2-3l-duratech-cam-sprocket-bolt-kit","title":"ARP Cam Sprocket Bolt Kit for Ford 2.3L Duratec","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Cam Sprocket Bolt Kit for Ford 2.3L Duratec. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThis kit handles valve train harmonics and stress for consistent performance in modified or high-rpm engines.\u003c\/li\u003e\n\u003cli\u003eKey Features 8740 Chrome Moly Material: Provides high tensile strength to withstand extreme engine loads and prevent bolt stretch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e151-1001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eCam Sprocket Bolt Kit for Ford 2.3L Duratec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Material\u003c\/th\u003e\n\u003ctd\u003eProvides high tensile strength to withstand extreme engine loads and prevent bolt stretch.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eResists corrosion in engine environments and simplifies cleaning during service.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncreased Pre-Load Clamping Force\u003c\/th\u003e\n\u003ctd\u003eLocks cam sprocket securely to eliminate timing slippage under boost or high rpm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOversized Bolt Head Flange\u003c\/th\u003e\n\u003ctd\u003eRetains cam button position for accurate valve timing and reduced wear.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReduced Socket Head Size\u003c\/th\u003e\n\u003ctd\u003eEnables simple installation and removal using common 12-point sockets without clearance issues.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this fit 2007 Ford Ranger 2.3L Duratec? A: Yes fits all 2001-2011 Ford Ranger models with 2.3L Duratec L4 engine.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact protective box approx 4 x 3 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.25 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeatures 8740 Chrome Moly Material\u003c\/th\u003e\n\u003ctd\u003eProvides high tensile strength to withstand extreme engine loads and prevent bolt stretch.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Cam Sprocket Bolt Kit for Ford 2.3L Duratec fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 151-1001, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861240660047,"sku":"ARP151-1001","price":28.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-cam-sprocket-bolt-kit-for-ford-2_3l-duratec-arp.jpg?v=1768369932"},{"product_id":"arp-ford-ecoboost-2-3l-12-pt-head-stud-kit","title":"ARP Cylinder Head Stud Kit for Ford 2.3L EcoBoost","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Cylinder Head Stud Kit for Ford 2.3L EcoBoost. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThis Pro Series kit delivers consistent clamping force to maintain head gasket integrity under high boost and RPM.\u003c\/li\u003e\n\u003cli\u003eEngine builders select ARP studs for competition engines due to their strength and precision manufacturing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e151-4301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHead Stud \u0026amp; Bolt Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eCylinder Head Stud Kit for Ford 2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eARP2000 Alloy\u003c\/th\u003e\n\u003ctd\u003eHeat-treated to 220,000 PSI tensile strength for extreme durability in boosted applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProvides corrosion resistance and smooth installation on engine blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePost-Heat-Treat Thread Rolling\u003c\/th\u003e\n\u003ctd\u003eIncreases fatigue strength by 2000% compared to pre-heat-treat threading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenterless Ground Studs\u003c\/th\u003e\n\u003ctd\u003eEnsures concentricity so heads and gaskets align perfectly without binding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUndercut Stud Design\u003c\/th\u003e\n\u003ctd\u003eEqualizes stretch across studs for uniform clamping and gasket compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2016 Ford Focus RS 2.3L EcoBoost? A: Yes, ARP 151-4301 is direct fit for 2016-2018 Focus RS 2.3L and 2015-2023 Mustang EcoBoost 2.3L engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eARP branded box, 12 x 8 x 2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features ARP2000 Alloy\u003c\/th\u003e\n\u003ctd\u003eHeat-treated to 220,000 PSI tensile strength for extreme durability in boosted applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP head stud \u0026amp; bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-head-stud-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Head Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-02-06-mini-cooper-head-bolt-kit\"\u003eARP 02-06 Mini Cooper Head Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-02-06-mini-cooper-s-head-stud-kit\"\u003eARP 02-06 Mini Cooper S Head Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Cylinder Head Stud Kit for Ford 2.3L EcoBoost fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 151-4301, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861240692815,"sku":"ARP151-4301","price":176.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-cylinder-head-stud-kit-for-ford-2_3l-ecoboost-arp.jpg?v=1768369934"},{"product_id":"arp-ford-2-3l-ecoboost-main-stud-kit","title":"ARP Main Stud Kit for Ford 2.3L EcoBoost","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Main Stud Kit for Ford 2.3L EcoBoost. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese studs replace factory bolts to stop main cap walk and fretting while guarding block threads from damage.\u003c\/li\u003e\n\u003cli\u003eKits deliver dependable hold for high-horsepower builds in performance vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e151-5407\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMain Stud \u0026amp; Bolt Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eMain Stud Kit for Ford 2.3L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eARP2000 Material\u003c\/th\u003e\n\u003ctd\u003e8740 chrome moly steel heat-treated in-house to 190,000 PSI tensile strength for extreme durability under boost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRolled J-Form Threads\u003c\/th\u003e\n\u003ctd\u003ePrecision threads formed after heat-treat create 2000% stronger connection than off-the-shelf fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEliminates Cap Walk\u003c\/th\u003e\n\u003ctd\u003ePrevents main caps from shifting during high-RPM operation to maintain precise bearing alignment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThread Protection\u003c\/th\u003e\n\u003ctd\u003eShields engine block threads from galling and wear for long-term reliability\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit\u003c\/th\u003e\n\u003ctd\u003eIncludes hardened parallel-ground washers high-quality nuts and standoff studs with serrated lock nuts for windage tray mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2017 Ford Focus RS 2.3L EcoBoost? A: Yes ARP 151-5407 is direct fit for all 2016-2018 Focus RS 2.3L engines including high-boost tunes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eOriginal ARP box 10 x 6 x 2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.95 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features ARP2000 Material\u003c\/th\u003e\n\u003ctd\u003e8740 chrome moly steel heat-treated in-house to 190,000 PSI tensile strength for extreme durability under boost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP main stud \u0026amp; bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-mazda-2-3l-dohc-16v-main-stud-kit\"\u003eARP 03 Mazda 2.3L DOHC 16V Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-mitsubishi-evo-main-stud-kit\"\u003eARP 03-06 Mitsubishi Evo Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-06-chevy-duramax-diesel-lbz-lmm-main-stud-kit\"\u003eARP 06+ Chevy Duramax Diesel LBZ\/LMM Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Main Stud Kit for Ford 2.3L EcoBoost fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 151-5407, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861240725583,"sku":"ARP151-5407","price":153.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-main-stud-kit-for-ford-2_3l-ecoboost-arp.jpg?v=1768369935"},{"product_id":"arp-ford-4-0l-xr6-incline-6cyl-main-stud-kit","title":"ARP Main Stud Kit for Ford 4.0L XR6 inline 6","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Main Stud Kit for Ford 4.0L XR6 inline 6. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eARP main stud kit 152-5402 delivers secure main cap fastening for Ford Falcon XR6 models with 4.0L SOHC inline 6 engines from 1991 to 2002.\u003c\/li\u003e\n\u003cli\u003eIt prevents main cap walk and fretting while safeguarding engine block threads from damage during high-stress operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e152-5402\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMain Stud \u0026amp; Bolt Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eMain Stud Kit for Ford 4.0L XR6 inline 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated in-house to 190,000 PSI tensile strength for extreme durability under boost or high RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrecision Rolled J-Form Threads\u003c\/th\u003e\n\u003ctd\u003eFormed after heat treatment to deliver threads 2000% stronger than off-the-shelf fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eComplete Kit Contents\u003c\/th\u003e\n\u003ctd\u003eIncludes hardened parallel-ground washers and high-quality 12-point nuts for precise, even clamping\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProvides corrosion resistance and smooth installation in engine environments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUSA Manufactured\u003c\/th\u003e\n\u003ctd\u003eBuilt to exacting standards with full quality control from premium domestic materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this kit fit Ford Falcon XR6 Turbo models? A: Designed for non-turbo 4.0L SOHC inline 6 engines in XR6 models. verify engine code for turbo applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or FedEx Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eProtective ARP box 2.25 x 6.75 x 6.75 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.65 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eHeat-treated in-house to 190,000 PSI tensile strength for extreme durability under boost or high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP main stud \u0026amp; bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-mazda-2-3l-dohc-16v-main-stud-kit\"\u003eARP 03 Mazda 2.3L DOHC 16V Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-03-06-mitsubishi-evo-main-stud-kit\"\u003eARP 03-06 Mitsubishi Evo Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-06-chevy-duramax-diesel-lbz-lmm-main-stud-kit\"\u003eARP 06+ Chevy Duramax Diesel LBZ\/LMM Main Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Main Stud Kit for Ford 4.0L XR6 inline 6 fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 152-5402, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861240791119,"sku":"ARP152-5402","price":192.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-main-stud-kit-for-ford-4_0l-xr6-inline-6-arp.jpg?v=1768369937"},{"product_id":"arp-ford-ecoboost-3-5l-v6-12pt-head-stud-kit","title":"ARP Cylinder Head Stud Kit for Ford 3.5L EcoBoost","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Cylinder Head Stud Kit for Ford 3.5L EcoBoost. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese studs replace factory bolts to handle high boost and power levels with consistent clamping force.\u003c\/li\u003e\n\u003cli\u003eEngine builders choose them for precise fit and fatigue resistance during racing or street use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e153-4303\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHead Stud \u0026amp; Bolt Kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eCylinder Head Stud Kit for Ford 3.5L EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eARP2000 Alloy\u003c\/th\u003e\n\u003ctd\u003eHeat-treated to 220000 psi tensile strength for durability under extreme cylinder pressures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProvides corrosion resistance and smooth installation on aluminum heads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePost-Heat-Treat Thread Rolling\u003c\/th\u003e\n\u003ctd\u003eDelivers 2000% higher fatigue strength than pre-heat-treat threaded studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCenterless Ground\u003c\/th\u003e\n\u003ctd\u003eEnsures concentricity so heads and gaskets align perfectly without binding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUndercut Design\u003c\/th\u003e\n\u003ctd\u003eEqualizes stretch across studs for uniform clamping and gasket compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit my 2015 Ford Explorer 3.5L EcoBoost? A: Yes it fits 2011-2019 Explorer models with 3.5L EcoBoost engine including base and Sport trims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSecure ARP box designed for component protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.60 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features ARP2000 Alloy\u003c\/th\u003e\n\u003ctd\u003eHeat-treated to 220000 psi tensile strength for durability under extreme cylinder pressures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP head stud \u0026amp; bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-head-stud-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Head Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-02-06-mini-cooper-head-bolt-kit\"\u003eARP 02-06 Mini Cooper Head Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-02-06-mini-cooper-s-head-stud-kit\"\u003eARP 02-06 Mini Cooper S Head Stud Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Cylinder Head Stud Kit for Ford 3.5L EcoBoost fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 153-4303, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861240823887,"sku":"ARP153-4303","price":277.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-cylinder-head-stud-kit-for-ford-3_5l-ecoboost-arp.jpg?v=1768369938"},{"product_id":"arp-ford-coyote-5-0l-12pt-cam-tower-bolt-kit","title":"ARP High Perf. Cam Tower Bolt Kit for Ford 5.0L Coyote - 12pt","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the High Perf. Cam Tower Bolt Kit for Ford 5.0L Coyote - 12pt. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese bolts and studs maintain exact camshaft alignment under high RPM and boost for consistent valve timing.\u003c\/li\u003e\n\u003cli\u003eRolled threads after heat treatment deliver fatigue resistance that holds up in demanding builds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e156-1004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHigh Perf. Cam Tower Bolt Kit for Ford 5.0L Coyote - 12pt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eProvides high tensile strength and durability for overhead cam engines under extreme loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThreads Rolled After Heat Treat\u003c\/th\u003e\n\u003ctd\u003eCreates deeper, stronger threads that resist loosening and failure over thousands of cycles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Heads\u003c\/th\u003e\n\u003ctd\u003eAllow precise wrench engagement to apply torque evenly without stripping or rounding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eResists corrosion in engine bays exposed to heat and moisture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in USA\u003c\/th\u003e\n\u003ctd\u003eEnsures consistent quality from premium domestic manufacturing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit Gen 3 Coyote engines in 2018+ Mustangs? A: Yes, designed for all Coyote 5.0L variants including Gen 1 2011-2014, Gen 2 2015-2017, and Gen 3 2018-2023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact box 6 x 4 x 2 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.40 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eProvides high tensile strength and durability for overhead cam engines under extreme loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the High Perf. Cam Tower Bolt Kit for Ford 5.0L Coyote - 12pt fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 156-1004, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861241708623,"sku":"ARP156-1004","price":122.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-high-perf_-cam-tower-bolt-kit-for-ford-5_0l-coyote-12pt-arp.jpg?v=1768369940"},{"product_id":"arp-ford-coyote-5-0l-cam-tower-hex-bolt-kit","title":"ARP High Perf. Cam Tower Bolt Kit for Ford 5.0L Coyote - hex","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the High Perf. Cam Tower Bolt Kit for Ford 5.0L Coyote - hex. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese hex head bolts and studs from 8740 chrome moly steel feature threads rolled after heat treatment to resist fatigue under high RPM loads.\u003c\/li\u003e\n\u003cli\u003eDesigned for 2011+ Ford Mustang GT and F-150 5.0L models seeking reliable engine hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e156-1005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eHigh Perf. Cam Tower Bolt Kit for Ford 5.0L Coyote - hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Steel\u003c\/th\u003e\n\u003ctd\u003eForged for high tensile strength and resistance to stress in performance engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProtects against rust and wear in harsh engine bay conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThreads Rolled After Heat Treat\u003c\/th\u003e\n\u003ctd\u003eIncreases fatigue life and holding power compared to cut threads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHex Head Design\u003c\/th\u003e\n\u003ctd\u003eFits standard wrenches and sockets for precise torquing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMade in USA\u003c\/th\u003e\n\u003ctd\u003eBuilt with strict quality controls for consistent fit and performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this fit Gen 3 Coyote in 2018+ Mustangs? A: Yes, 156-1005 works on all 5.0L Coyote variants from 2011-2023 including Gen 1, 2, and 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact box 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.4 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKey Features 8740 Chrome Moly Steel\u003c\/th\u003e\n\u003ctd\u003eForged for high tensile strength and resistance to stress in performance engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the High Perf. Cam Tower Bolt Kit for Ford 5.0L Coyote - hex fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 156-1005, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861241741391,"sku":"ARP156-1005","price":111.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-high-perf_-cam-tower-bolt-kit-for-ford-5_0l-coyote-hex-arp.jpg?v=1768369941"},{"product_id":"arp-ford-coyote-5-0l-cam-drive-bolt-kit","title":"ARP Cam Bolt Kit for Ford 5.0L cam phaser bolt kit, 24 bolts","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Cam Bolt Kit for Ford 5.0L cam phaser bolt kit, 24 bolts. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eSecure your Ford 5.0L Coyote engine cam phasers with the ARP 156-1006 bolt kit including 24 high-strength fasteners.\u003c\/li\u003e\n\u003cli\u003eDesigned for 2011-2023 Ford Mustang GT and 2011-2020 F-150 5.0L models this kit replaces weak factory bolts prone to failure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e156-1006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eCam Bolt Kit for Ford 5.0L cam phaser bolt kit, 24 bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eDelivers high tensile strength to handle extreme loads and prevent fatigue failure under high RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncreased Pre-Load Clamping\u003c\/th\u003e\n\u003ctd\u003eLocks cam phasers in place eliminating timing chain walk and phaser rattle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePositive Timing Gear Register\u003c\/th\u003e\n\u003ctd\u003eEnsures accurate camshaft positioning for optimal valve timing and power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOversized Bolt Head Flange\u003c\/th\u003e\n\u003ctd\u003eProvides secure cam button retention during operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReduced Socket Head Size\u003c\/th\u003e\n\u003ctd\u003eSimplifies installation and removal in tight engine bays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eWill this kit fit 2018+ Ford Mustang 5.0L Coyote engines? A: Yes ARP 156-1006 bolts match Gen 3 Coyote cam phasers used in 2018-2023 Mustang GT models providing full compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground or USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eCompact box 6 x 4 x 1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.25 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChrome Moly Construction\u003c\/th\u003e\n\u003ctd\u003eDelivers high tensile strength to handle extreme loads and prevent fatigue failure under high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Cam Bolt Kit for Ford 5.0L cam phaser bolt kit, 24 bolts fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 156-1006, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861241806927,"sku":"ARP156-1006","price":69.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-cam-bolt-kit-for-ford-5_0l-cam-phaser-bolt-kit-24-bolts-arp.jpg?v=1768369942"},{"product_id":"arp-ford-coyote-5-0l-flywheel-bolt-kit","title":"ARP Flywheel Bolt Kit for Ford Coyote 5.0L","description":"\u003cp\u003eThis ARP performance fastener, stud, bolt, tool, or assembly is the Flywheel Bolt Kit for Ford Coyote 5.0L. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread, length, material, strength series, and included quantity are exact-part specific\u003c\/li\u003e\n\u003cli\u003eEngine, vehicle, component, and installation requirements must match the current ARP application\u003c\/li\u003e\n\u003cli\u003eThese Pro Series bolts deliver 190000 PSI tensile strength forged from 8740 chrome moly for dependable power handling in street and track builds.\u003c\/li\u003e\n\u003cli\u003eThe 12-point head and increased shank diameter ensure precise registration and clamp load under high RPM.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\u003ctd colspan=\"4\"\u003eUniversal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eARP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e156-2801\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eHardware Kits - Other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eFlywheel Bolt Kit for Ford Coyote 5.0L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e190000 PSI Rating\u003c\/th\u003e\n\u003ctd\u003eHandles extreme loads in competition engines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e8740 Chrome Moly\u003c\/th\u003e\n\u003ctd\u003eAerospace-grade steel heat-treated for fatigue resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e12-Point Flat Head\u003c\/th\u003e\n\u003ctd\u003eLocks tools securely prevents cam-out during install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLarger Shank Diameter\u003c\/th\u003e\n\u003ctd\u003eBoosts strength over stock fits flywheel perfectly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlack Oxide Finish\u003c\/th\u003e\n\u003ctd\u003eProtects against rust in harsh conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQ\u003c\/th\u003e\n\u003ctd\u003eDoes this fit 2018-2023 Ford Mustang GT 5.0L? A: Yes compatible with all Gen 1 2 3 Coyote 5.0L engines in Mustang F-150 and listed vehicles.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMethod\u003c\/th\u003e\n\u003ctd\u003eUPS Ground USPS Priority\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailability\u003c\/th\u003e\n\u003ctd\u003eIn stock - ships same or next business day\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e6 x 4 x 1 inch box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.3 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRPM. Key Features 190000 PSI Rating\u003c\/th\u003e\n\u003ctd\u003eHandles extreme loads in competition engines 8740\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new ARP hardware kits - other in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout ARP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAutomotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant Disclosures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCalifornia Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/arp-head-studs-and-fasteners\"\u003eShop all ARP products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-875in-od-x-7-16in-id-insert-washers-10-pack\"\u003eARP .875in OD  x 7\/16in ID Insert Washers (10 pack)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-06-6-6l-gm-duramax-diesel-flywheel-bolt-kit\"\u003eARP 01-06 6.6L GM Duramax Diesel Flywheel Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/arp-01-10-6-6l-gm-duramax-diesel-flexplate-bolt-kit\"\u003eARP 01-10 6.6L GM Duramax Diesel Flexplate Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the Flywheel Bolt Kit for Ford Coyote 5.0L fits my application?\u003c\/strong\u003e\u003cbr\u003eMatch the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I reuse the factory torque value with this ARP hardware?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with this ARP kit?\u003c\/strong\u003e\u003cbr\u003eOnly the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm ARP part number 156-2801, the complete application, and every required supporting component before beginning work.\u003c\/li\u003e\n\u003cli\u003eClean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.\u003c\/li\u003e\n\u003cli\u003eFollow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.\u003c\/li\u003e\n\u003cli\u003eVerify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":39861241839695,"sku":"ARP156-2801","price":41.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/arp-flywheel-bolt-kit-for-ford-coyote-5_0l-arp.jpg?v=1768369944"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/collections\/arp-head-studs.jpg?v=1782251739","url":"https:\/\/www.blackopsautoworks.com\/en-ca\/collections\/arp-head-studs-and-fasteners.oembed","provider":"Black Ops Auto Works","version":"1.0","type":"link"}