{"title":"Clips","description":"\u003cp\u003ePush pins, body clips, and retainer clips are the fasteners that hold trim panels, bumper covers, splash shields, and interior components securely in place. These small plastic and metal fasteners break during disassembly and are essential to have on hand before any body or interior work to avoid rattles and loose panels after the job.\u003c\/p\u003e\u003ch4\u003ePopular Upgrades\u003c\/h4\u003e\u003cp\u003eOEM-spec push pin retainers for bumper covers and fender liners are the most frequently replaced fasteners after any front-end or body panel removal. Door panel retainer clips that match factory specifications prevent interior rattles and ensure a tight fit without cracking the surrounding trim. Assorted clip kits covering multiple sizes are popular for shops and serious DIYers who want to have the right fastener on hand without ordering single pieces.\u003c\/p\u003e\u003ch4\u003eWhat clips hold bumper covers in place?\u003c\/h4\u003e\u003cp\u003eMost bumper covers use a combination of push-pin retainers along the top edge and plastic snap clips along the lower valance. The specific clip size and type varies by make, model, and year, so referencing your vehicle's OEM part number or a fitment chart ensures the correct replacement. Common sizes run from 6mm to 10mm diameter depending on the application.\u003c\/p\u003e\u003ch4\u003eDo aftermarket clips perform as well as OEM?\u003c\/h4\u003e\u003cp\u003eQuality aftermarket clips manufactured to OEM specifications perform equally well and are generally available at lower cost than dealer-sourced parts. Look for clips made from nylon or polypropylene that matches the original specification. Avoid low-quality substitutes that are brittle or undersized, as they will fail to hold panels securely over time.\u003c\/p\u003e\u003cp\u003eStock up on essential fasteners at Black Ops Auto Works. Browse our \u003ca href=\"\/en-ca\/collections\/exhaust\"\u003eexhaust systems\u003c\/a\u003e, \u003ca href=\"\/en-ca\/collections\/air-intake-systems\"\u003eair intake systems\u003c\/a\u003e, and \u003ca href=\"\/en-ca\/collections\/suspension\"\u003esuspension upgrades\u003c\/a\u003e for the rest of your build needs.\u003c\/p\u003e","products":[{"product_id":"omix-shift-lever-clip-87-06-jeep-wrangler","title":"Omix Shift Lever Clip 87-06 Jeep Wrangler","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX shift lever clip 87. It is identified by manufacturer part number 18885.32 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 18885.32\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clips configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1982-1983\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eShift Lever Clip 87. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1982-1986\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-7\u003c\/td\u003e\n\u003ctd\u003eShift Lever Clip 87. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e18885.32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clips package identified by manufacturer part number 18885.32. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-d300-shift-k-clip-80-86-jeep-cj\"\u003eOmix D300 Shift K Clip 80-86 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-amc20-1-piece-bearing-kit-76-86-jeep-cj-models\"\u003eOmix AMC20 1 Piece Bearing Kit 76-86 Jeep CJ Models\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-amc20-bearing-retainer-76-86-jeep-cj-models\"\u003eOmix AMC20 Bearing Retainer 76-86 Jeep CJ Models\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 18885.32 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat dimensions must be checked before ordering?\u003c\/strong\u003e\u003cbr\u003eConfirm every thread, hole spacing, connector, material, finish, position, quantity, and mating component identified for the exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the original hardware be reused?\u003c\/strong\u003e\u003cbr\u003eReuse only when the service procedure permits it and inspection confirms the fastener or component remains undamaged and within specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 18885.32. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40173225246799,"sku":"OMI18885.32","price":6.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi18885-32-clips-image-01.jpg?v=1788876230"},{"product_id":"omix-97-01-jeep-hood-prop-rod-clip","title":"Omix 97-01 Jeep Hood Prop Rod Clip","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX 97. It is identified by manufacturer part number 12032.02 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 12032.02\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clips configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1994-2001\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCherokee\u003c\/td\u003e\n\u003ctd\u003e97. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2001\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003e97. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e12032.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clips package identified by manufacturer part number 12032.02. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-12mm-push-pin-bumper-to-front-fascia-07-18-jk\"\u003eOmix 12mm Push Pin Bumper to Front Fascia- 07-18 JK\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-4-pc-fender-flare-kit-07-18-jk-1\"\u003eOmix 4-Pc Fender Flare Kit- 07-18 JK\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-4-piece-fender-flare-kit-87-95-jeep-wrangler-yj\"\u003eOmix 4-Piece Fender Flare Kit- 87-95 Jeep Wrangler YJ\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 12032.02 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs mounting hardware included with this body component?\u003c\/strong\u003e\u003cbr\u003eOnly hardware expressly listed for the exact part number is included. Inspect brackets, seals, clips, hinges, fasteners, and mounting surfaces before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked before tightening the body hardware?\u003c\/strong\u003e\u003cbr\u003eTest-fit the component, establish even gaps and alignment, confirm weather sealing and moving-part clearance, then tighten hardware in the specified sequence.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 12032.02. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":41167818489935,"sku":"OMI12032.02","price":4.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/products\/omix-omi12032-02-clips-image-01.jpg?v=1788876129"},{"product_id":"omix-d300-shift-k-clip-80-86-jeep-cj","title":"Omix D300 Shift K Clip 80-86 Jeep CJ","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX d300 shift k clip 80. It is identified by manufacturer part number 18674.24 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 18674.24\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clips configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980-1983\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eD300 Shift K Clip 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980-1986\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-7\u003c\/td\u003e\n\u003ctd\u003eD300 Shift K Clip 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1981-1985\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eScrambler\u003c\/td\u003e\n\u003ctd\u003eD300 Shift K Clip 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e18674.24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clips package identified by manufacturer part number 18674.24. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-shift-lever-clip-87-06-jeep-wrangler\"\u003eOmix Shift Lever Clip 87-06 Jeep Wrangler\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-amc20-1-piece-bearing-kit-76-86-jeep-cj-models\"\u003eOmix AMC20 1 Piece Bearing Kit 76-86 Jeep CJ Models\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-amc20-bearing-retainer-76-86-jeep-cj-models\"\u003eOmix AMC20 Bearing Retainer 76-86 Jeep CJ Models\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 18674.24 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat dimensions must be checked before ordering?\u003c\/strong\u003e\u003cbr\u003eConfirm every thread, hole spacing, connector, material, finish, position, quantity, and mating component identified for the exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the original hardware be reused?\u003c\/strong\u003e\u003cbr\u003eReuse only when the service procedure permits it and inspection confirms the fastener or component remains undamaged and within specification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 18674.24. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":41518752792655,"sku":"OMI18674.24","price":2.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi18674-24-clips-image-01.jpg?v=1788876166"},{"product_id":"eaton-52870-detroit-truetrac-c-clip-retaining-kit-no-569-dana-35-27-spline-jeep","title":"Eaton 52870 Detroit TrueTrac C-Clip Retaining Kit No. 569 Dana 35 27-Spline Jeep","description":"\u003cp\u003eEaton 52870 is an axle-retaining service kit selected by the exact differential, axle family, spline count, and retainer design. Do not select C-clips or retaining hardware by appearance alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAxle-retaining service hardware\u003c\/li\u003e\n\u003cli\u003eExact retainer and spline application\u003c\/li\u003e\n\u003cli\u003eSupports differential service or installation\u003c\/li\u003e\n\u003cli\u003eOriginal axle configuration must be verified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by axle family, position, spline count, shaft diameter, ratio range, and exact Eaton part number rather than vehicle year, make, and model. Confirm the installed axle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEaton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e52870\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eAxle and specification specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpline Count\u003c\/th\u003e\n\u003ctd\u003e27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAxle Family\u003c\/th\u003e\n\u003ctd\u003eDana 35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne Eaton axle-retaining service kit in the exact listed configuration\u003c\/li\u003e\n\u003cli\u003eManufacturer packaging and documentation supplied with the exact part number\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Eaton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEaton manufactures locking and limited-slip differentials, axle service parts, installation kits, and ELocker controls for performance, off-road, towing, and commercial applications. Correct selection depends on the exact axle and differential configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eaton Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-axle-c-clips-retain-kit-317\"\u003eEaton Axle C-Clips Retain Kit (317)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-axle-c-clips-retain-kit-368\"\u003eEaton Axle C-Clips Retain Kit (368)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-axle-c-clips-retain-kit-477\"\u003eEaton Axle C-Clips Retain Kit (477)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/en-ca\/collections\/eaton\"\u003eEaton collection\u003c\/a\u003e for related drivetrain components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I verify Eaton 52870 is the correct service kit?\u003c\/strong\u003e\u003cbr\u003eMatch the original Eaton differential part number, axle family, spline count, internal design, and every supplied component before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan similar Eaton service parts be substituted?\u003c\/strong\u003e\u003cbr\u003eNo. Retainers, armatures, stators, clips, and internal hardware can differ by axle and differential revision even when they look alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould the differential be inspected while it is apart?\u003c\/strong\u003e\u003cbr\u003eYes. A qualified technician should inspect bearings, races, gears, shafts, seals, wiring where applicable, backlash, preload, and contact pattern before reassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProfessional drivetrain installation is recommended. Confirm the axle and component identity before disassembly, inspect all reusable parts, follow current Eaton and vehicle service procedures, establish bearing preload and backlash, verify the gear contact pattern, use the specified lubricant, and test operation before returning the vehicle to service.\u003c\/p\u003e","brand":"Eaton","offers":[{"title":"Default Title","offer_id":45948984229967,"sku":"EAT52870","price":81.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eaton-52870-detroit-truetrac-c-clip-retaining-kit-dana-35.png?v=1782244984"},{"product_id":"eaton-axle-c-clips-retain-kit-368","title":"Eaton Axle C-Clips Retain Kit (368)","description":"\u003cp\u003eEaton 52737 is an axle-retaining service kit selected by the exact differential, axle family, spline count, and retainer design. Do not select C-clips or retaining hardware by appearance alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAxle-retaining service hardware\u003c\/li\u003e\n\u003cli\u003eExact retainer and spline application\u003c\/li\u003e\n\u003cli\u003eSupports differential service or installation\u003c\/li\u003e\n\u003cli\u003eOriginal axle configuration must be verified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by axle family, position, spline count, shaft diameter, ratio range, and exact Eaton part number rather than vehicle year, make, and model. Confirm the installed axle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEaton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e52737\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eAxle and specification specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne Eaton axle-retaining service kit in the exact listed configuration\u003c\/li\u003e\n\u003cli\u003eManufacturer packaging and documentation supplied with the exact part number\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Eaton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEaton manufactures locking and limited-slip differentials, axle service parts, installation kits, and ELocker controls for performance, off-road, towing, and commercial applications. Correct selection depends on the exact axle and differential configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eaton Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-axle-c-clips-retain-kit-317\"\u003eEaton Axle C-Clips Retain Kit (317)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-axle-c-clips-retain-kit-477\"\u003eEaton Axle C-Clips Retain Kit (477)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-52870-detroit-truetrac-c-clip-retaining-kit-no-569-dana-35-27-spline-jeep\"\u003eEaton 52870 Detroit TrueTrac C-Clip Retaining Kit No. 569 Dana 35 27-Spline Jeep\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/en-ca\/collections\/eaton\"\u003eEaton collection\u003c\/a\u003e for related drivetrain components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I verify Eaton 52737 is the correct service kit?\u003c\/strong\u003e\u003cbr\u003eMatch the original Eaton differential part number, axle family, spline count, internal design, and every supplied component before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan similar Eaton service parts be substituted?\u003c\/strong\u003e\u003cbr\u003eNo. Retainers, armatures, stators, clips, and internal hardware can differ by axle and differential revision even when they look alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould the differential be inspected while it is apart?\u003c\/strong\u003e\u003cbr\u003eYes. A qualified technician should inspect bearings, races, gears, shafts, seals, wiring where applicable, backlash, preload, and contact pattern before reassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProfessional drivetrain installation is recommended. Confirm the axle and component identity before disassembly, inspect all reusable parts, follow current Eaton and vehicle service procedures, establish bearing preload and backlash, verify the gear contact pattern, use the specified lubricant, and test operation before returning the vehicle to service.\u003c\/p\u003e","brand":"Eaton","offers":[{"title":"Default Title","offer_id":46601516744783,"sku":"EAT52737","price":81.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eaton-eat52737-clips-image-01.jpg?v=1788572427"},{"product_id":"eaton-axle-c-clips-retain-kit-317","title":"Eaton Axle C-Clips Retain Kit (317)","description":"\u003cp\u003eEaton 52738 is an axle-retaining service kit selected by the exact differential, axle family, spline count, and retainer design. Do not select C-clips or retaining hardware by appearance alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAxle-retaining service hardware\u003c\/li\u003e\n\u003cli\u003eExact retainer and spline application\u003c\/li\u003e\n\u003cli\u003eSupports differential service or installation\u003c\/li\u003e\n\u003cli\u003eOriginal axle configuration must be verified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by axle family, position, spline count, shaft diameter, ratio range, and exact Eaton part number rather than vehicle year, make, and model. Confirm the installed axle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEaton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e52738\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eAxle and specification specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne Eaton axle-retaining service kit in the exact listed configuration\u003c\/li\u003e\n\u003cli\u003eManufacturer packaging and documentation supplied with the exact part number\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Eaton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEaton manufactures locking and limited-slip differentials, axle service parts, installation kits, and ELocker controls for performance, off-road, towing, and commercial applications. Correct selection depends on the exact axle and differential configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eaton Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-axle-c-clips-retain-kit-368\"\u003eEaton Axle C-Clips Retain Kit (368)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-axle-c-clips-retain-kit-477\"\u003eEaton Axle C-Clips Retain Kit (477)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-52870-detroit-truetrac-c-clip-retaining-kit-no-569-dana-35-27-spline-jeep\"\u003eEaton 52870 Detroit TrueTrac C-Clip Retaining Kit No. 569 Dana 35 27-Spline Jeep\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/en-ca\/collections\/eaton\"\u003eEaton collection\u003c\/a\u003e for related drivetrain components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I verify Eaton 52738 is the correct service kit?\u003c\/strong\u003e\u003cbr\u003eMatch the original Eaton differential part number, axle family, spline count, internal design, and every supplied component before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan similar Eaton service parts be substituted?\u003c\/strong\u003e\u003cbr\u003eNo. Retainers, armatures, stators, clips, and internal hardware can differ by axle and differential revision even when they look alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould the differential be inspected while it is apart?\u003c\/strong\u003e\u003cbr\u003eYes. A qualified technician should inspect bearings, races, gears, shafts, seals, wiring where applicable, backlash, preload, and contact pattern before reassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProfessional drivetrain installation is recommended. Confirm the axle and component identity before disassembly, inspect all reusable parts, follow current Eaton and vehicle service procedures, establish bearing preload and backlash, verify the gear contact pattern, use the specified lubricant, and test operation before returning the vehicle to service.\u003c\/p\u003e","brand":"Eaton","offers":[{"title":"Default Title","offer_id":46601516810319,"sku":"EAT52738","price":81.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eaton-eat52738-clips-image-01.jpg?v=1788572427"},{"product_id":"eaton-axle-c-clips-retain-kit-477","title":"Eaton Axle C-Clips Retain Kit (477)","description":"\u003cp\u003eEaton 52741 is an axle-retaining service kit selected by the exact differential, axle family, spline count, and retainer design. Do not select C-clips or retaining hardware by appearance alone.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAxle-retaining service hardware\u003c\/li\u003e\n\u003cli\u003eExact retainer and spline application\u003c\/li\u003e\n\u003cli\u003eSupports differential service or installation\u003c\/li\u003e\n\u003cli\u003eOriginal axle configuration must be verified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis component is selected by axle family, position, spline count, shaft diameter, ratio range, and exact Eaton part number rather than vehicle year, make, and model. Confirm the installed axle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eEaton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e52741\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eAxle and specification specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne Eaton axle-retaining service kit in the exact listed configuration\u003c\/li\u003e\n\u003cli\u003eManufacturer packaging and documentation supplied with the exact part number\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAbout Eaton\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEaton manufactures locking and limited-slip differentials, axle service parts, installation kits, and ELocker controls for performance, off-road, towing, and commercial applications. Correct selection depends on the exact axle and differential configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Eaton Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-axle-c-clips-retain-kit-317\"\u003eEaton Axle C-Clips Retain Kit (317)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-axle-c-clips-retain-kit-368\"\u003eEaton Axle C-Clips Retain Kit (368)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/eaton-52870-detroit-truetrac-c-clip-retaining-kit-no-569-dana-35-27-spline-jeep\"\u003eEaton 52870 Detroit TrueTrac C-Clip Retaining Kit No. 569 Dana 35 27-Spline Jeep\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse the \u003ca href=\"\/en-ca\/collections\/eaton\"\u003eEaton collection\u003c\/a\u003e for related drivetrain components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I verify Eaton 52741 is the correct service kit?\u003c\/strong\u003e\u003cbr\u003eMatch the original Eaton differential part number, axle family, spline count, internal design, and every supplied component before disassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan similar Eaton service parts be substituted?\u003c\/strong\u003e\u003cbr\u003eNo. Retainers, armatures, stators, clips, and internal hardware can differ by axle and differential revision even when they look alike.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould the differential be inspected while it is apart?\u003c\/strong\u003e\u003cbr\u003eYes. A qualified technician should inspect bearings, races, gears, shafts, seals, wiring where applicable, backlash, preload, and contact pattern before reassembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProfessional drivetrain installation is recommended. Confirm the axle and component identity before disassembly, inspect all reusable parts, follow current Eaton and vehicle service procedures, establish bearing preload and backlash, verify the gear contact pattern, use the specified lubricant, and test operation before returning the vehicle to service.\u003c\/p\u003e","brand":"Eaton","offers":[{"title":"Default Title","offer_id":46601516908623,"sku":"EAT52741","price":81.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/eaton-eat52741-clips-image-01.jpg?v=1788572427"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/collections\/clips.jpg?v=1782251794","url":"https:\/\/www.blackopsautoworks.com\/en-ca\/collections\/clips.oembed","provider":"Black Ops Auto Works","version":"1.0","type":"link"}