{"title":"Clutch Forks","description":"\u003cp\u003eThe clutch fork, also called the clutch release arm or throwout bearing fork, pivots on a ball stud to push the release bearing against the pressure plate fingers when the clutch pedal is depressed. It is a high-wear item on performance builds and should be inspected any time the transmission is out for a clutch job.\u003c\/p\u003e\u003ch4\u003ePopular Upgrades\u003c\/h4\u003e\u003cp\u003eHeavy-duty steel clutch forks are the top upgrade for high-torque applications where OEM stamped-steel forks are prone to bending or cracking under repeated aggressive use. Ball stud and pivot socket upgrades in hardened steel extend the service life of the clutch fork pivot point, which is a common wear location on high-mileage clutch systems. For hydraulic clutch conversions, fork-delete bearing retainer kits that replace the fork entirely are available for several popular platforms.\u003c\/p\u003e\u003ch4\u003eWhat causes a clutch fork to fail?\u003c\/h4\u003e\u003cp\u003eClutch fork failures are most commonly caused by metal fatigue from repeated high-load engagement cycles on high-output builds, worn pivot ball sockets that allow excess play, or improper adjustment resulting in a bent fork. On stamped OEM forks, cracks typically initiate at stress points near the pivot socket under sustained torque load.\u003c\/p\u003e\u003ch4\u003eCan I replace just the clutch fork without replacing the full clutch?\u003c\/h4\u003e\u003cp\u003eYes, a clutch fork can be replaced independently if the disc, pressure plate, and release bearing are in good condition. However, since the fork is only accessible with the transmission removed, most technicians recommend inspecting or replacing the complete clutch assembly at the same time to avoid a repeat R\u0026amp;R labor charge in the near future.\u003c\/p\u003e\u003cp\u003eFind clutch forks and drivetrain parts at Black Ops Auto Works. Browse our \u003ca href=\"\/en-ca\/collections\/exhaust\"\u003eexhaust systems\u003c\/a\u003e, \u003ca href=\"\/en-ca\/collections\/suspension\"\u003esuspension upgrades\u003c\/a\u003e, and \u003ca href=\"\/en-ca\/collections\/air-intake-systems\"\u003eair intake systems\u003c\/a\u003e for additional performance upgrades.\u003c\/p\u003e","products":[{"product_id":"torque-solution-2015-subaru-impreza-wrx-6-speed-brz-billet-clutch-fork-pivot-black-oxide-coated","title":"Torque Solution 2015+ Subaru Impreza WRX 6-Speed \/ BRZ Billet Clutch Fork Pivot (Black Oxide Coated)","description":"\u003cp\u003eTorque Solution 2015+ Subaru Impreza WRX 6-Speed \/ BRZ Billet Clutch Fork Pivot (Black Oxide Coated) is the exact new Torque Solution clutch forks shown in this listing. Manufacturer part number TS-SU-519 matches Torque Solution's current manufacturer catalog. Confirm the complete application and specifications before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact manufacturer part number TS-SU-519\u003c\/li\u003e\n\u003cli\u003eProduct family: clutch forks\u003c\/li\u003e\n\u003cli\u003eApplication, dimensions, material, finish, and interface are part specific\u003c\/li\u003e\n\u003cli\u003eCurrent manufacturer identity and application guidance verified\u003c\/li\u003e\n\u003cli\u003eCatalog status: matches Torque Solution's current manufacturer catalog\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTorque Solution Billet Chromoly Clutch Fork Pivot Applications: Subaru 5 Speed \/ 15+ WRX 6 Speed \/ Subaru BRZ Torque Solution Billet Clutch Fork Pivot for Subaru 5 Speed \/ 15+ WRX 6 Speed \/ Subaru BRZ is made to be stronger than the OEM pivot and is a perfect complement to go with our billet chromoly clutch fork. Now nickel plated for greater corrosion resistance. - CNC Billet 4130 Chromoly Steel - Nickel Plated - Limited Lifetime Warranty Instal\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTorque Solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTS-SU-519\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication Type\u003c\/th\u003e\n\u003ctd\u003eFitment Verification Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBillet aluminum where specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Torque Solution clutch forks identified by manufacturer part number TS-SU-519, plus only the hardware expressly stated for this exact product. Other mating parts and optional accessories are not included unless listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Torque Solution\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTorque Solution develops application-specific billet mounts, shifter components, suspension hardware, turbo-system adapters, thermal products, hoses, tools, and related performance parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Torque Solution Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/torque-solution\"\u003eShop all Torque Solution products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-brz-fr-s-gt86-gr86-billet-chromoly-clutch-fork\"\u003eTorque Solution BRZ\/FR-S\/GT86\/GR86 Billet Chromoly Clutch Fork\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-billet-chromoly-clutch-fork-06-14-subaru-wrx-15-subaru-wrx\"\u003eTorque Solution Billet Chromoly Clutch Fork 06-14 Subaru WRX \/ 15+ Subaru WRX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-mitsubishi-evo-7-8-9-10-clutch-fork-stop\"\u003eTorque Solution Mitsubishi EVO 7\/8\/9\/10 Clutch Fork Stop\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Torque Solution TS-SU-519 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, listed year, make, model, transmission or engine requirement, dimensions, mounting interface, and every current manufacturer note. Similar-looking parts are not automatically interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with Torque Solution TS-SU-519?\u003c\/strong\u003e\u003cbr\u003eThis listing includes only the exact product and hardware expressly identified by Torque Solution for this part number. Mating components, tools, fluids, and optional accessories are not included unless stated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked before installing Torque Solution TS-SU-519?\u003c\/strong\u003e\u003cbr\u003eTest-fit the part, verify mounting points and clearances, inspect every mating component, follow the current Torque Solution instructions, use the specified torque values, and confirm proper operation before driving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current Torque Solution guidance for part TS-SU-519. Test-fit the component, inspect mating parts, maintain required clearance, use the specified hardware and torque values, and verify safe operation before driving. Professional installation is recommended when specialized tools, fabrication, or vehicle disassembly is required.\u003c\/p\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":39884450562127,"sku":"TQSTS-SU-519","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/torque-solution-2015-subaru-impreza-wrx-6-speed-brz-billet-clutch-fork-pivot-black-oxide-coated-torque-solution.jpg?v=1773127149"},{"product_id":"mcleod-fork-ford-cable-link-t45-3660-modified-longer-u-shape-2000up","title":"McLeod Fork Ford Cable Link T45 3660 Modified Longer \u0026 U-Shape 2000Up","description":"\u003cp\u003eThis McLeod Racing clutch or drivetrain component for the exact specified interface. Correct selection depends on the complete vehicle and drivetrain application, clutch configuration, transmission interface, dimensions, and intended power level.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplication-specific clutch or drivetrain design\u003c\/li\u003e\n\u003cli\u003eExact configuration remains manufacturer-part-number specific\u003c\/li\u003e\n\u003cli\u003eEngine, transmission, spline, flywheel, release-system, and hydraulic requirements must be verified\u003c\/li\u003e\n\u003cli\u003ePower capacity and engagement characteristics must suit the vehicle and intended use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1999-2004\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, transmission, spline, flywheel, production date, and all manufacturer notes\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eMcLeod Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16923\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle specific, verify drivetrain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new McLeod Racing product in the exact configuration and quantity identified by manufacturer part number 16923. Discs, pressure plates, flywheels, bearings, cylinders, lines, adapters, fittings, fasteners, fluid, and tools are included only when expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout McLeod Racing\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMcLeod Racing develops clutch, flywheel, release, hydraulic, and drivetrain products for street and competition vehicles. Correct selection remains exact-vehicle, exact-drivetrain, exact-interface, and exact-part-number specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated McLeod Racing Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/mcleod-racing\"\u003eShop all McLeod Racing products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/mcleod-ball-stud-adjustable-ford-cable-linkage-chevy-vega\"\u003eMcLeod Ball Stud Adjustable Ford Cable Linkage \u0026amp; Chevy Vega\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/mcleod-t-o-brg-ford-adjustable-to-3-lengths-cable-linkage\"\u003eMcLeod T.O.Brg Ford Adjustable To 3 Lengths Cable Linkage\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/mcleod-13-18-ford-focus-rs-st-steel-braided-clutch-line\"\u003eMcLeod 13-18 Ford Focus RS\/ST Steel Braided Clutch Line\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this McLeod Racing product fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then confirm the engine, transmission, input-shaft spline, crank pattern, flywheel, release system, production date, and every manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould related clutch and flywheel components be inspected during installation?\u003c\/strong\u003e\u003cbr\u003eYes. Inspect the flywheel, release bearing, pilot support, hydraulics, fasteners, seals, and mating surfaces. Replace or service worn components according to the manufacturer and factory procedures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a clutch break-in procedure required?\u003c\/strong\u003e\u003cbr\u003eFollow the current instructions for the exact part number. Street friction materials commonly require controlled engagement cycles before full-load use, while race configurations may use a different procedure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current McLeod Racing and factory service instructions for this exact part number. Verify every drivetrain interface before disassembly, inspect related wear components and seals, keep friction surfaces clean, use specified fasteners and torque sequences, bleed hydraulic components when applicable, confirm release travel, and complete the required break-in procedure before full-load use.\u003c\/p\u003e","brand":"McLeod Racing","offers":[{"title":"Default Title","offer_id":39991683448911,"sku":"MLR16923","price":65.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/mcleod-racing-mlr16923-clutch-forks-image-01.jpg?v=1788787221"},{"product_id":"radium-engineering-mitsubishi-evo-8-10-clutch-fork-stop","title":"Radium Engineering Mitsubishi Evo 8-10 Clutch Fork Stop","description":"\u003cp\u003eThe Radium Engineering Mitsubishi Evo 8-10 Clutch Fork Stop is a performance fuel-system component identified by its exact manufacturer part number. Confirm every interface, dimension, pressure requirement, fuel type, and required supporting part before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConfiguration is identified by the exact Radium Engineering part number\u003c\/li\u003e\n\u003cli\u003ePressure, fluid compatibility, dimensions, and connections must match\u003c\/li\u003e\n\u003cli\u003eProfessional assembly and leak testing are recommended for fuel-system work\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eValidated applications include 2003-2006 Mitsubishi Lancer Evolution, 2015 Mitsubishi Lancer Evolution Final Edition, 2008 Mitsubishi Lancer Evolution GSR, 2010-2015 Mitsubishi Lancer Evolution GSR, 2005-2006 Mitsubishi Lancer Evolution MR, 2008 Mitsubishi Lancer Evolution MR, 2010-2011 Mitsubishi Lancer Evolution MR Touring, 2005-2006 Mitsubishi Lancer Evolution RS, 2006 Mitsubishi Lancer Evolution SE, 2010 Mitsubishi Lancer Evolution SE. Confirm engine, fuel-system layout, intake or tank configuration, and all product notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRadium Engineering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e20-0262\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe Radium Engineering component identified by manufacturer part number 20-0262\u003c\/li\u003e\n\u003cli\u003eOnly fittings, seals, brackets, wiring, or hardware specifically listed for this exact configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBrand Information\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRadium Engineering develops fuel delivery, crankcase ventilation, fluid-control, and motorsport plumbing components. Port standards, pressure range, fuel compatibility, mounting, and vehicle fitment remain manufacturer-part-number specific.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Parts\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/radium-engineering\"\u003eRadium Engineering Fuel System Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/fuel-delivery\"\u003eFuel Delivery Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/fittings\"\u003eFuel Fittings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/fuel-pumps\"\u003eFuel Pumps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm this part belongs in my fuel-system layout?\u003c\/strong\u003e\u003cbr\u003eMatch its exact ports, pressure and flow role, fuel compatibility, mounting, and interfaces to a complete system plan before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan this component be used with E85 or other ethanol blends?\u003c\/strong\u003e\u003cbr\u003eFuel compatibility depends on the exact seals, element, hose, and component materials. Confirm the manufacturer specifications for every part in the system before using ethanol fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould this fuel-system part be installed professionally?\u003c\/strong\u003e\u003cbr\u003eProfessional installation is recommended whenever the work involves tank removal, custom plumbing, wiring, pressure adjustment, fabrication, or motorsport safety requirements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked before the first startup?\u003c\/strong\u003e\u003cbr\u003eVerify every connection, seal, fastener, hose route, electrical circuit, and pressure setting. Prime and pressure-test the complete system, then correct any leak before starting the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDepressurize the fuel or fluid system, disconnect power when required, work in a ventilated area away from ignition sources, and protect open lines from contamination. Assemble every connection with the correct seal and torque method, secure plumbing and wiring away from heat and abrasion, then prime and pressure-test the complete system before operation.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":40050357108815,"sku":"RAD20-0262","price":36.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/radium-engineering-rad20-0262-product-image-01-8625621071.jpg?v=1790716403"},{"product_id":"omix-clutch-fork-72-75-jeep-cj-5-cj-6","title":"Omix Clutch Fork 72-75 Jeep CJ-5 CJ-6","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX clutch fork 72. It is identified by manufacturer part number 16914.05 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 16914.05\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clutch forks configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1972-1975\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eClutch Fork 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1972-1975\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-6\u003c\/td\u003e\n\u003ctd\u003eClutch Fork 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16914.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clutch forks package identified by manufacturer part number 16914.05. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-76-87-jeep-cj-xj-mj-sj-j-trucks\"\u003eOmix Clutch Fork- 76-87 Jeep CJ\/XJ\/MJ\/SJ\/J-Trucks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-boot-72-75-jeep-cj\"\u003eOmix Clutch K Boot 72-75 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-boot-76-79-jeep-cj\"\u003eOmix Clutch K Boot 76-79 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 16914.05 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat must be matched before drivetrain installation?\u003c\/strong\u003e\u003cbr\u003eConfirm transmission, axle, spline, ratio, shaft, seal, bearing, clutch, transfer-case, and position details that apply to the exact vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be inspected during drivetrain service?\u003c\/strong\u003e\u003cbr\u003eInspect mating splines, bearings, seals, lubricant, fasteners, runout, end play, and companion components using the current vehicle service procedure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 16914.05. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40129677590607,"sku":"OMI16914.05","price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi16914-05-clutch-forks-image-01.jpg?v=1788876245"},{"product_id":"omix-clutch-fork-76-87-jeep-cj-xj-mj-sj-j-trucks","title":"Omix Clutch Fork- 76-87 Jeep CJ\/XJ\/MJ\/SJ\/J-Trucks","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX clutch fork. It is identified by manufacturer part number 16914.06 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 16914.06\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clutch forks configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1976-1983\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eClutch Fork. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1976-1986\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-7\u003c\/td\u003e\n\u003ctd\u003eClutch Fork. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1981-1985\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eScrambler\u003c\/td\u003e\n\u003ctd\u003eClutch Fork. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16914.06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clutch forks package identified by manufacturer part number 16914.06. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-72-75-jeep-cj-5-cj-6\"\u003eOmix Clutch Fork 72-75 Jeep CJ-5 CJ-6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-boot-72-75-jeep-cj\"\u003eOmix Clutch K Boot 72-75 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-boot-76-79-jeep-cj\"\u003eOmix Clutch K Boot 76-79 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 16914.06 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat must be matched before drivetrain installation?\u003c\/strong\u003e\u003cbr\u003eConfirm transmission, axle, spline, ratio, shaft, seal, bearing, clutch, transfer-case, and position details that apply to the exact vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be inspected during drivetrain service?\u003c\/strong\u003e\u003cbr\u003eInspect mating splines, bearings, seals, lubricant, fasteners, runout, end play, and companion components using the current vehicle service procedure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 16914.06. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40129677721679,"sku":"OMI16914.06","price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi16914-06-clutch-forks-image-01.jpg?v=1788876245"},{"product_id":"omix-clutch-k-boot-72-75-jeep-cj","title":"Omix Clutch K Boot 72-75 Jeep CJ","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX clutch k boot 72. It is identified by manufacturer part number 16918.01 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 16918.01\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clutch forks configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1972-1975\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eClutch K Boot 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1972-1975\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-6\u003c\/td\u003e\n\u003ctd\u003eClutch K Boot 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16918.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clutch forks package identified by manufacturer part number 16918.01. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-72-75-jeep-cj-5-cj-6\"\u003eOmix Clutch Fork 72-75 Jeep CJ-5 CJ-6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-76-87-jeep-cj-xj-mj-sj-j-trucks\"\u003eOmix Clutch Fork- 76-87 Jeep CJ\/XJ\/MJ\/SJ\/J-Trucks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-boot-76-79-jeep-cj\"\u003eOmix Clutch K Boot 76-79 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 16918.01 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat must be matched before drivetrain installation?\u003c\/strong\u003e\u003cbr\u003eConfirm transmission, axle, spline, ratio, shaft, seal, bearing, clutch, transfer-case, and position details that apply to the exact vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be inspected during drivetrain service?\u003c\/strong\u003e\u003cbr\u003eInspect mating splines, bearings, seals, lubricant, fasteners, runout, end play, and companion components using the current vehicle service procedure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 16918.01. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40129678475343,"sku":"OMI16918.01","price":3.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi16918-01-clutch-forks-image-01.jpg?v=1788876015"},{"product_id":"omix-clutch-k-boot-76-79-jeep-cj","title":"Omix Clutch K Boot 76-79 Jeep CJ","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX clutch k boot 76. It is identified by manufacturer part number 16918.02 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 16918.02\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clutch forks configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1976-1979\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eClutch K Boot 76. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1976-1979\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-7\u003c\/td\u003e\n\u003ctd\u003eClutch K Boot 76. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16918.02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clutch forks package identified by manufacturer part number 16918.02. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-72-75-jeep-cj-5-cj-6\"\u003eOmix Clutch Fork 72-75 Jeep CJ-5 CJ-6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-76-87-jeep-cj-xj-mj-sj-j-trucks\"\u003eOmix Clutch Fork- 76-87 Jeep CJ\/XJ\/MJ\/SJ\/J-Trucks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-boot-72-75-jeep-cj\"\u003eOmix Clutch K Boot 72-75 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 16918.02 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat must be matched before drivetrain installation?\u003c\/strong\u003e\u003cbr\u003eConfirm transmission, axle, spline, ratio, shaft, seal, bearing, clutch, transfer-case, and position details that apply to the exact vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be inspected during drivetrain service?\u003c\/strong\u003e\u003cbr\u003eInspect mating splines, bearings, seals, lubricant, fasteners, runout, end play, and companion components using the current vehicle service procedure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 16918.02. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40129678606415,"sku":"OMI16918.02","price":4.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi16918-02-clutch-forks-image-01.jpg?v=1788876015"},{"product_id":"omix-clutch-k-boot-80-86-jeep-cj","title":"Omix Clutch K Boot 80-86 Jeep CJ","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX clutch k boot 80. It is identified by manufacturer part number 16918.03 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 16918.03\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clutch forks configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980-1983\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eClutch K Boot 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980-1986\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-7\u003c\/td\u003e\n\u003ctd\u003eClutch K Boot 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1981-1985\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eScrambler\u003c\/td\u003e\n\u003ctd\u003eClutch K Boot 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16918.03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clutch forks package identified by manufacturer part number 16918.03. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-72-75-jeep-cj-5-cj-6\"\u003eOmix Clutch Fork 72-75 Jeep CJ-5 CJ-6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-76-87-jeep-cj-xj-mj-sj-j-trucks\"\u003eOmix Clutch Fork- 76-87 Jeep CJ\/XJ\/MJ\/SJ\/J-Trucks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-boot-72-75-jeep-cj\"\u003eOmix Clutch K Boot 72-75 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 16918.03 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat must be matched before drivetrain installation?\u003c\/strong\u003e\u003cbr\u003eConfirm transmission, axle, spline, ratio, shaft, seal, bearing, clutch, transfer-case, and position details that apply to the exact vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be inspected during drivetrain service?\u003c\/strong\u003e\u003cbr\u003eInspect mating splines, bearings, seals, lubricant, fasteners, runout, end play, and companion components using the current vehicle service procedure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 16918.03. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40129678934095,"sku":"OMI16918.03","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi16918-03-clutch-forks-image-01.jpg?v=1788876015"},{"product_id":"omix-clutch-k-pivot-ball-72-86-jeep-cj","title":"Omix Clutch K Pivot Ball 72-86 Jeep CJ","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX clutch k pivot ball 72. It is identified by manufacturer part number 16919.13 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 16919.13\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clutch forks configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1972-1983\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eClutch K Pivot Ball 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1972-1975\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-6\u003c\/td\u003e\n\u003ctd\u003eClutch K Pivot Ball 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1976-1986\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-7\u003c\/td\u003e\n\u003ctd\u003eClutch K Pivot Ball 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1981-1985\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eScrambler\u003c\/td\u003e\n\u003ctd\u003eClutch K Pivot Ball 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16919.13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clutch forks package identified by manufacturer part number 16919.13. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-72-75-jeep-cj-5-cj-6\"\u003eOmix Clutch Fork 72-75 Jeep CJ-5 CJ-6\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-76-87-jeep-cj-xj-mj-sj-j-trucks\"\u003eOmix Clutch Fork- 76-87 Jeep CJ\/XJ\/MJ\/SJ\/J-Trucks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-boot-72-75-jeep-cj\"\u003eOmix Clutch K Boot 72-75 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 16919.13 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat must be matched before drivetrain installation?\u003c\/strong\u003e\u003cbr\u003eConfirm transmission, axle, spline, ratio, shaft, seal, bearing, clutch, transfer-case, and position details that apply to the exact vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be inspected during drivetrain service?\u003c\/strong\u003e\u003cbr\u003eInspect mating splines, bearings, seals, lubricant, fasteners, runout, end play, and companion components using the current vehicle service procedure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 16919.13. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40129680900175,"sku":"OMI16919.13","price":2.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi16919-13-clutch-forks-image-01.jpg?v=1788876015"},{"product_id":"omix-clutch-k-outer-return-spring-72-86-jeep-cj","title":"Omix Clutch K Outer Return Spring 72-86 Jeep CJ","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX clutch k outer return spring 72. It is identified by manufacturer part number 16919.14 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 16919.14\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clutch forks configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1972-1983\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eClutch K Outer Return Spring 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1972-1975\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-6\u003c\/td\u003e\n\u003ctd\u003eClutch K Outer Return Spring 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1976-1986\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-7\u003c\/td\u003e\n\u003ctd\u003eClutch K Outer Return Spring 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1981-1985\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eScrambler\u003c\/td\u003e\n\u003ctd\u003eClutch K Outer Return Spring 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16919.14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clutch forks package identified by manufacturer part number 16919.14. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-spring-80-86-jeep-cj-models\"\u003eOmix Clutch Fork Spring 80-86 Jeep CJ Models\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-inner-return-spring-72-75-jeep-cj\"\u003eOmix Clutch K Inner Return Spring 72-75 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-72-75-jeep-cj-5-cj-6\"\u003eOmix Clutch Fork 72-75 Jeep CJ-5 CJ-6\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 16919.14 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould suspension parts be replaced in pairs?\u003c\/strong\u003e\u003cbr\u003eReplace paired wear components by axle when the service procedure calls for it, then inspect mounts, bushings, joints, springs, dampers, steering, and brake-line clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs an alignment required after installation?\u003c\/strong\u003e\u003cbr\u003eComplete an alignment whenever the repair changes steering or suspension geometry, then verify full travel, tire clearance, torque values, and the required fastener recheck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 16919.14. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40129681031247,"sku":"OMI16919.14","price":3.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi16919-14-clutch-forks-image-01.jpg?v=1788876015"},{"product_id":"omix-clutch-fork-spring-80-86-jeep-cj-models","title":"Omix Clutch Fork Spring 80-86 Jeep CJ Models","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX clutch fork spring 80. It is identified by manufacturer part number 16920.03 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 16920.03\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clutch forks configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1959-1960\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-3\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1959-1960\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968-1971\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1959-1960\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-6\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968-1971\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-6\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCommando\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1959-1960\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eDJ3\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967-1971\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eDJ5\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1968\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eDJ6\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1961-1967\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eDispatcher\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1958-1966\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eFC150\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eFC170\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1967-1971\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eJeepster\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1961-1962\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eUtility\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1946-1958\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWillys\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1941-1942\u003c\/td\u003e\n\u003ctd\u003eWillys\u003c\/td\u003e\n\u003ctd\u003eMB\u003c\/td\u003e\n\u003ctd\u003eClutch Fork Spring 80. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16920.03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clutch forks package identified by manufacturer part number 16920.03. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-inner-return-spring-72-75-jeep-cj\"\u003eOmix Clutch K Inner Return Spring 72-75 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-outer-return-spring-72-86-jeep-cj\"\u003eOmix Clutch K Outer Return Spring 72-86 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-72-75-jeep-cj-5-cj-6\"\u003eOmix Clutch Fork 72-75 Jeep CJ-5 CJ-6\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 16920.03 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould suspension parts be replaced in pairs?\u003c\/strong\u003e\u003cbr\u003eReplace paired wear components by axle when the service procedure calls for it, then inspect mounts, bushings, joints, springs, dampers, steering, and brake-line clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs an alignment required after installation?\u003c\/strong\u003e\u003cbr\u003eComplete an alignment whenever the repair changes steering or suspension geometry, then verify full travel, tire clearance, torque values, and the required fastener recheck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 16920.03. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40129683390543,"sku":"OMI16920.03","price":1.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi16920-03-clutch-forks-image-01.jpg?v=1788876016"},{"product_id":"omix-clutch-fork-93-18-jeep-xj-zj-kj-yj-tj-jk","title":"Omix Clutch Fork 93-18 Jeep XJ\/ZJ\/KJ\/YJ\/TJ\/JK","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX clutch fork 93. It is identified by manufacturer part number 16914.07 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 16914.07\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clutch forks configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1994-1999\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCherokee\u003c\/td\u003e\n\u003ctd\u003eClutch Fork 93. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1994-1998\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGrand Cherokee\u003c\/td\u003e\n\u003ctd\u003eClutch Fork 93. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1994-1995\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eClutch Fork 93. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1997-2006\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler\u003c\/td\u003e\n\u003ctd\u003eClutch Fork 93. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16914.07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clutch forks package identified by manufacturer part number 16914.07. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-auto-trans-rebuild-kit-tf6-87-03-wrangler\"\u003eOmix Auto Trans Rebuild Kit TF6 87-03 Wrangler\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-axle-snubber-rear-87-95-jeep-wrangler-yj\"\u003eOmix Axle Snubber Rear 87-95 Jeep Wrangler (YJ)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-axledisconnecthousingcovergasket84-95cherokee-wran\"\u003eOmix AxleDisconnectHousingCoverGasket84-95Cherokee \u0026amp; Wran\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 16914.07 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat must be matched before drivetrain installation?\u003c\/strong\u003e\u003cbr\u003eConfirm transmission, axle, spline, ratio, shaft, seal, bearing, clutch, transfer-case, and position details that apply to the exact vehicle.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be inspected during drivetrain service?\u003c\/strong\u003e\u003cbr\u003eInspect mating splines, bearings, seals, lubricant, fasteners, runout, end play, and companion components using the current vehicle service procedure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 16914.07. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40133705433167,"sku":"OMI16914.07","price":17.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi16914-07-clutch-forks-image-01.jpg?v=1788876037"},{"product_id":"omix-clutch-k-inner-return-spring-72-75-jeep-cj","title":"Omix Clutch K Inner Return Spring 72-75 Jeep CJ","description":"\u003cp\u003eRestore, repair, or complete the listed Jeep application with this OMIX clutch k inner return spring 72. It is identified by manufacturer part number 16919.15 and must be matched to the complete vehicle, mounting position, dimensions, and current manufacturer application notes before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact OMIX manufacturer part number 16919.15\u003c\/li\u003e\n\u003cli\u003ePart-number-specific clutch forks configuration\u003c\/li\u003e\n\u003cli\u003eDimensions, material, finish, position, and included hardware remain application specific\u003c\/li\u003e\n\u003cli\u003eDesigned for restoration, repair, or service of the verified vehicle application\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1972-1975\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-5\u003c\/td\u003e\n\u003ctd\u003eClutch K Inner Return Spring 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1972-1975\u003c\/td\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ-6\u003c\/td\u003e\n\u003ctd\u003eClutch K Inner Return Spring 72. Confirm trim, drivetrain, engine, body style, position, and all manufacturer notes separately.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOMIX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eOMIX-ADA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e16919.15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new OMIX clutch forks package identified by manufacturer part number 16919.15. Gaskets, seals, fasteners, wiring, brackets, fluids, and companion parts are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout OMIX\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOMIX supplies replacement, restoration, and service components for Jeep and Willys vehicles. Every component remains specific to its manufacturer part number, vehicle generation, position, dimensions, and related factory configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated OMIX Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/omix\"\u003eShop all OMIX Jeep restoration parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-spring-80-86-jeep-cj-models\"\u003eOmix Clutch Fork Spring 80-86 Jeep CJ Models\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-k-outer-return-spring-72-86-jeep-cj\"\u003eOmix Clutch K Outer Return Spring 72-86 Jeep CJ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/omix-clutch-fork-72-75-jeep-cj-5-cj-6\"\u003eOmix Clutch Fork 72-75 Jeep CJ-5 CJ-6\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm OMIX 16919.15 fits my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the listed year, make, and model, then verify trim, drivetrain, engine, body style, component position, and every current manufacturer application note.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould suspension parts be replaced in pairs?\u003c\/strong\u003e\u003cbr\u003eReplace paired wear components by axle when the service procedure calls for it, then inspect mounts, bushings, joints, springs, dampers, steering, and brake-line clearance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs an alignment required after installation?\u003c\/strong\u003e\u003cbr\u003eComplete an alignment whenever the repair changes steering or suspension geometry, then verify full travel, tire clearance, torque values, and the required fastener recheck.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current OMIX instructions and vehicle service information for part number 16919.15. Verify the vehicle is safely supported or electrically isolated as required, test-fit every interface, use the specified sealant, fluid, torque, aiming, adjustment, or alignment procedure, then inspect operation and clearance before returning the vehicle to service.\u003c\/p\u003e","brand":"OMIX","offers":[{"title":"Default Title","offer_id":40736167559247,"sku":"OMI16919.15","price":2.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/omix-omi16919-15-clutch-forks-image-01.jpg?v=1788876071"},{"product_id":"torque-solution-brz-fr-s-gt86-gr86-billet-chromoly-clutch-fork","title":"Torque Solution BRZ\/FR-S\/GT86\/GR86 Billet Chromoly Clutch Fork","description":"\u003cp\u003eTorque Solution BRZ\/FR-S\/GT86\/GR86 Billet Chromoly Clutch Fork is the exact new Torque Solution clutch forks shown in this listing. Manufacturer part number TS-SU-518B matches Torque Solution's current manufacturer catalog. Confirm the complete application and specifications before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact manufacturer part number TS-SU-518B\u003c\/li\u003e\n\u003cli\u003eProduct family: clutch forks\u003c\/li\u003e\n\u003cli\u003eApplication, dimensions, material, finish, and interface are part specific\u003c\/li\u003e\n\u003cli\u003eCurrent manufacturer identity and application guidance verified\u003c\/li\u003e\n\u003cli\u003eCatalog status: matches Torque Solution's current manufacturer catalog\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2016\u003c\/td\u003e\n\u003ctd\u003eScion\u003c\/td\u003e\n\u003ctd\u003eFR-S\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eBRZ\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2021\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e86\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2022-2024\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eGR86\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTorque Solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTS-SU-518B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBillet aluminum where specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Torque Solution clutch forks identified by manufacturer part number TS-SU-518B, plus only the hardware expressly stated for this exact product. Other mating parts and optional accessories are not included unless listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Torque Solution\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTorque Solution develops application-specific billet mounts, shifter components, suspension hardware, turbo-system adapters, thermal products, hoses, tools, and related performance parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Torque Solution Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/torque-solution\"\u003eShop all Torque Solution products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-2015-subaru-impreza-wrx-6-speed-brz-billet-clutch-fork-pivot-black-oxide-coated\"\u003eTorque Solution 2015+ Subaru Impreza WRX 6-Speed \/ BRZ Billet Clutch Fork Pivot (Black Oxide Coated)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-billet-chromoly-clutch-fork-06-14-subaru-wrx-15-subaru-wrx\"\u003eTorque Solution Billet Chromoly Clutch Fork 06-14 Subaru WRX \/ 15+ Subaru WRX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-mitsubishi-evo-7-8-9-10-clutch-fork-stop\"\u003eTorque Solution Mitsubishi EVO 7\/8\/9\/10 Clutch Fork Stop\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Torque Solution TS-SU-518B is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, listed year, make, model, transmission or engine requirement, dimensions, mounting interface, and every current manufacturer note. Similar-looking parts are not automatically interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with Torque Solution TS-SU-518B?\u003c\/strong\u003e\u003cbr\u003eThis listing includes only the exact product and hardware expressly identified by Torque Solution for this part number. Mating components, tools, fluids, and optional accessories are not included unless stated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked before installing Torque Solution TS-SU-518B?\u003c\/strong\u003e\u003cbr\u003eTest-fit the part, verify mounting points and clearances, inspect every mating component, follow the current Torque Solution instructions, use the specified torque values, and confirm proper operation before driving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current Torque Solution guidance for part TS-SU-518B. Test-fit the component, inspect mating parts, maintain required clearance, use the specified hardware and torque values, and verify safe operation before driving. Professional installation is recommended when specialized tools, fabrication, or vehicle disassembly is required.\u003c\/p\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":43429075419215,"sku":"TQSTS-SU-518B","price":165.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/torque-solution-tqsts-su-518b-product-image-01-8472201295.jpg?v=1790716139"},{"product_id":"torque-solution-mitsubishi-evo-7-8-9-10-clutch-fork-stop","title":"Torque Solution Mitsubishi EVO 7\/8\/9\/10 Clutch Fork Stop","description":"\u003cp\u003eTorque Solution Mitsubishi EVO 7\/8\/9\/10 Clutch Fork Stop is the exact new Torque Solution clutch forks shown in this listing. Manufacturer part number TS-EV-868 matches Torque Solution's current manufacturer catalog. Confirm the complete application and specifications before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact manufacturer part number TS-EV-868\u003c\/li\u003e\n\u003cli\u003eProduct family: clutch forks\u003c\/li\u003e\n\u003cli\u003eApplication, dimensions, material, finish, and interface are part specific\u003c\/li\u003e\n\u003cli\u003eCurrent manufacturer identity and application guidance verified\u003c\/li\u003e\n\u003cli\u003eCatalog status: matches Torque Solution's current manufacturer catalog\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2001\u003c\/td\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eLancer\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2016\u003c\/td\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eLancer\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTorque Solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTS-EV-868\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Torque Solution clutch forks identified by manufacturer part number TS-EV-868, plus only the hardware expressly stated for this exact product. Other mating parts and optional accessories are not included unless listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Torque Solution\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTorque Solution develops application-specific billet mounts, shifter components, suspension hardware, turbo-system adapters, thermal products, hoses, tools, and related performance parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Torque Solution Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/torque-solution\"\u003eShop all Torque Solution products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-2015-subaru-impreza-wrx-6-speed-brz-billet-clutch-fork-pivot-black-oxide-coated\"\u003eTorque Solution 2015+ Subaru Impreza WRX 6-Speed \/ BRZ Billet Clutch Fork Pivot (Black Oxide Coated)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-brz-fr-s-gt86-gr86-billet-chromoly-clutch-fork\"\u003eTorque Solution BRZ\/FR-S\/GT86\/GR86 Billet Chromoly Clutch Fork\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-billet-chromoly-clutch-fork-06-14-subaru-wrx-15-subaru-wrx\"\u003eTorque Solution Billet Chromoly Clutch Fork 06-14 Subaru WRX \/ 15+ Subaru WRX\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Torque Solution TS-EV-868 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, listed year, make, model, transmission or engine requirement, dimensions, mounting interface, and every current manufacturer note. Similar-looking parts are not automatically interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with Torque Solution TS-EV-868?\u003c\/strong\u003e\u003cbr\u003eThis listing includes only the exact product and hardware expressly identified by Torque Solution for this part number. Mating components, tools, fluids, and optional accessories are not included unless stated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked before installing Torque Solution TS-EV-868?\u003c\/strong\u003e\u003cbr\u003eTest-fit the part, verify mounting points and clearances, inspect every mating component, follow the current Torque Solution instructions, use the specified torque values, and confirm proper operation before driving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current Torque Solution guidance for part TS-EV-868. Test-fit the component, inspect mating parts, maintain required clearance, use the specified hardware and torque values, and verify safe operation before driving. Professional installation is recommended when specialized tools, fabrication, or vehicle disassembly is required.\u003c\/p\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":43522314141775,"sku":"TQSTS-EV-868","price":38.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/torque-solution-tqsts-ev-868-product-image-01-4150494287.png?v=1790715737"},{"product_id":"torque-solution-billet-chromoly-clutch-fork-06-14-subaru-wrx-15-subaru-wrx","title":"Torque Solution Billet Chromoly Clutch Fork 06-14 Subaru WRX \/ 15+ Subaru WRX","description":"\u003cp\u003eTorque Solution Billet Chromoly Clutch Fork 06-14 Subaru WRX \/ 15+ Subaru WRX is the exact new Torque Solution clutch forks shown in this listing. Manufacturer part number TS-SU-518 matches Torque Solution's current manufacturer catalog. Confirm the complete application and specifications before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact manufacturer part number TS-SU-518\u003c\/li\u003e\n\u003cli\u003eProduct family: clutch forks\u003c\/li\u003e\n\u003cli\u003eApplication, dimensions, material, finish, and interface are part specific\u003c\/li\u003e\n\u003cli\u003eCurrent manufacturer identity and application guidance verified\u003c\/li\u003e\n\u003cli\u003eCatalog status: matches Torque Solution's current manufacturer catalog\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2008\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eForester\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2014\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eImpreza\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2009\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eLegacy\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eOutback\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003ctd\u003eConfirm transmission, engine, trim, drivetrain, and every manufacturer note.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTorque Solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eTS-SU-518\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eClutch Forks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBillet aluminum where specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Torque Solution clutch forks identified by manufacturer part number TS-SU-518, plus only the hardware expressly stated for this exact product. Other mating parts and optional accessories are not included unless listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Torque Solution\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTorque Solution develops application-specific billet mounts, shifter components, suspension hardware, turbo-system adapters, thermal products, hoses, tools, and related performance parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Torque Solution Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/torque-solution\"\u003eShop all Torque Solution products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-2015-subaru-impreza-wrx-6-speed-brz-billet-clutch-fork-pivot-black-oxide-coated\"\u003eTorque Solution 2015+ Subaru Impreza WRX 6-Speed \/ BRZ Billet Clutch Fork Pivot (Black Oxide Coated)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-brz-fr-s-gt86-gr86-billet-chromoly-clutch-fork\"\u003eTorque Solution BRZ\/FR-S\/GT86\/GR86 Billet Chromoly Clutch Fork\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/torque-solution-mitsubishi-evo-7-8-9-10-clutch-fork-stop\"\u003eTorque Solution Mitsubishi EVO 7\/8\/9\/10 Clutch Fork Stop\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm Torque Solution TS-SU-518 is correct?\u003c\/strong\u003e\u003cbr\u003eMatch the complete manufacturer part number, listed year, make, model, transmission or engine requirement, dimensions, mounting interface, and every current manufacturer note. Similar-looking parts are not automatically interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with Torque Solution TS-SU-518?\u003c\/strong\u003e\u003cbr\u003eThis listing includes only the exact product and hardware expressly identified by Torque Solution for this part number. Mating components, tools, fluids, and optional accessories are not included unless stated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should be checked before installing Torque Solution TS-SU-518?\u003c\/strong\u003e\u003cbr\u003eTest-fit the part, verify mounting points and clearances, inspect every mating component, follow the current Torque Solution instructions, use the specified torque values, and confirm proper operation before driving.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current Torque Solution guidance for part TS-SU-518. Test-fit the component, inspect mating parts, maintain required clearance, use the specified hardware and torque values, and verify safe operation before driving. Professional installation is recommended when specialized tools, fabrication, or vehicle disassembly is required.\u003c\/p\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":43920211902543,"sku":"TQSTS-SU-518","price":170.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/torque-solution-tqsts-su-518-product-image-01-9819437135.jpg?v=1790717585"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/collections\/clutch-forks.jpg?v=1782251813","url":"https:\/\/www.blackopsautoworks.com\/en-ca\/collections\/clutch-forks.oembed","provider":"Black Ops Auto Works","version":"1.0","type":"link"}