{"title":"Fuel Injector Sets - Rotary","description":"\u003cp\u003eA matched set of fuel injectors ensures balanced fuel delivery across every port in rotary Wankel engine applications, preventing the port-to-port variation that causes uneven combustion, rich or lean conditions, and apex seal issues that accelerate with improper fueling. Rotary engines have unique fueling requirements compared to piston engines, with each rotor face acting as its own combustion chamber requiring precise sequential injection across multiple ports simultaneously. Factory injectors lose flow capacity and spray pattern quality over time due to deposits, coking, and solenoid wear, making a complete set replacement more reliable than swapping a single injector after a misfire or rough running diagnosis. Rotary EFI builds benefit especially from matched sets since the Wankel's sensitivity to mixture distribution makes balanced fuel delivery more critical than in conventional piston engines.\u003c\/p\u003e\n\u003ch4\u003ePopular Upgrades\u003c\/h4\u003e\n\u003cp\u003eTop-selling rotary injector sets include Bosch EV14 matched sets widely used in 13B and 20B rotary builds on the Mazda RX-7 and RX-8 platforms, RC Engineering flow-tested OEM sets for restoring aging factory injectors to original specification, and Injector Dynamics precision-flow sets for high-boost rotary applications on E85 or methanol. Denso OEM injectors for the RX-8 13B-MSP direct-injection port configuration are consistently in demand for service replacements. For competition rotary builds using peripheral port or bridge port intake configurations, custom high-flow single-element injectors from Bosch and Siemens Deka are matched and tested specifically for the non-standard port geometry.\u003c\/p\u003e\n\u003ch4\u003ePerformance and Handling\u003c\/h4\u003e\n\u003cp\u003eInjector matching tolerance, typically expressed as plus or minus one to two percent of the nominal flow rate, is especially critical in rotary applications because the engine's lack of a traditional valve train makes any injector imbalance immediately apparent in combustion quality and exhaust gas temperature readings. Tighter matching reduces the fuel trim corrections needed by the ECU, resulting in cleaner combustion and cooler apex seals across all rotor faces. For street-driven rotary builds, OEM-equivalent flow tolerance is sufficient, but competition rotary engines running high boost often use precision-matched sets verified within one percent to minimize any port-to-port fuel variation.\u003c\/p\u003e\n\u003ch4\u003eHow do I choose the right injector flow rate for a rotary engine build?\u003c\/h4\u003e\n\u003cp\u003eRotary fuel flow calculations differ from piston engines because the Wankel cycle produces three power strokes per rotor revolution rather than one, effectively tripling the combustion event frequency per revolution. A common starting point is to size injectors for the equivalent horsepower target as a piston engine of similar output, then add a 25 percent margin to account for the rotary's typical requirement for richer mixtures to manage heat. For ethanol or E85 builds, add another 30 percent to the injector flow target on top of the gasoline calculation to account for ethanol's lower energy density per unit volume.\u003c\/p\u003e\n\u003ch4\u003eDo I need to retune my ECU after installing a new rotary injector set?\u003c\/h4\u003e\n\u003cp\u003eYes, any change in injector flow rate requires updating the ECU's injector scaling parameters including the injector flow constant, dead time offset, and minimum pulse width values to prevent over-fueling or lean conditions at idle and light throttle. Rotary EFI tunes are particularly sensitive to injector dead time changes because the short injection windows at high RPM make dead time compensation more significant as a percentage of total pulse width. Starting with a professional base map calibration after installing new injectors is strongly recommended before attempting any self-tuning on a rotary EFI system.\u003c\/p\u003e\n\u003ch4\u003eWhy These Parts Fit Right\u003c\/h4\u003e\n\u003cp\u003eEvery rotary injector set in this collection is listed with flow rate, impedance, connector style, and compatible rotary engine families to ensure you order the correct set for your build. Flow data sheets are linked where available so you have the exact fueling constants needed for your ECU tune. Orders ship from US warehouses with fast delivery to keep your rotary build on schedule.\u003c\/p\u003e\n\u003cp\u003eSupport your rotary injectors with \u003ca href=\"\/en-ca\/collections\/air-intake-systems\"\u003ehigh-flow air intake systems\u003c\/a\u003e for maximum charge density, complete the package with \u003ca href=\"\/en-ca\/collections\/exhaust\"\u003eperformance exhaust systems\u003c\/a\u003e, and keep your build sorted with \u003ca href=\"\/en-ca\/collections\/suspension\"\u003esuspension upgrades\u003c\/a\u003e matched to your power output.\u003c\/p\u003e","products":[{"product_id":"grams-performance-79-92-mazda-rx7-rx8-1000cc-fuel-injectors-set-of-2","title":"Grams Performance 79-92 Mazda RX7 \/ RX8 1000cc Fuel Injectors (Set of 2)","description":"\u003cp\u003eThe Grams Performance 79-92 Mazda RX7 \/ RX8 1000cc Fuel Injectors (Set of 2) is designed for the 1979-1991 Mazda RX-7 and the other vehicles in the fitment table. Match manufacturer part number G2-1000-1000, the complete fuel-system configuration, dimensions, ports, electrical connector, fuel type, operating pressure, and calibration requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInjector flow and quantity are exact part-number specifications\u003c\/li\u003e\n\u003cli\u003eElectrical connector, injector height, seals, and rail interface must match\u003c\/li\u003e\n\u003cli\u003eFuel type, pressure, horsepower target, and duty cycle determine sizing\u003c\/li\u003e\n\u003cli\u003eECU calibration is required for the installed injector data\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1991\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eRX-7\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, fuel system, connector, and exact product interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-1995\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eRX-7\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, fuel system, connector, and exact product interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2011\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eRX-8\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, fuel system, connector, and exact product interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eGrams Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eG2-1000-1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eFuel Injector Sets - Rotary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInjector Flow Rate\u003c\/th\u003e\n\u003ctd\u003e1000 cc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInjector Quantity\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Grams Performance fuel injector sets - rotary identified by manufacturer part number G2-1000-1000, in the quantity stated by the title. Fittings, adapters, wiring, hoses, rails, pumps, regulators, tuning, and installation hardware are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Grams Performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGrams Performance develops fuel injectors, fuel-system components, intake manifolds, throttle bodies, pumps, filters, gauges, and related performance hardware for import and domestic applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Grams Performance Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/grams-performance\"\u003eShop all Grams Performance products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/grams-performance-79-92-mazda-rx7-rx8-550cc-fuel-injectors-set-of-2\"\u003eGrams Performance 79-92 Mazda RX7 \/ RX8 550cc Fuel Injectors (Set of 2)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/grams-performance-0-120-psi-fuel-pressure-gauge\"\u003eGrams Performance 0-120 PSI Fuel Pressure Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/grams-performance-0-30-psi-fuel-pressure-gauge\"\u003eGrams Performance 0-30 PSI Fuel Pressure Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these injectors the correct size for my power goal?\u003c\/strong\u003e\u003cbr\u003eInjector sizing depends on horsepower, fuel type, base fuel pressure, cylinder count, and target duty cycle. Confirm the calculation with the tuner before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these injectors plug directly into my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the exact vehicle application, injector height, rail and manifold interface, electrical connector, and required adapters. A year and model match alone does not confirm every modified fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the ECU need to be tuned after installation?\u003c\/strong\u003e\u003cbr\u003eYes. Use the correct injector characterization data for the exact part number and fuel pressure. Do not operate the engine under load until calibration and leak checks are complete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current Grams Performance and vehicle service instructions for part number G2-1000-1000. Relieve fuel pressure, disconnect the battery when required, compare every connector, seal, port, and mounting point before installation, and use fuel-compatible components. Pressure-test the completed system, inspect for leaks, verify fuel pressure and electrical operation, load the correct calibration data, and confirm safe operation before driving.\u003c\/p\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":40152024842319,"sku":"GRPG2-1000-1000","price":173.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/grams-performance-grpg2-1000-1000-fuel-injector-sets-rotary-image-01.jpg?v=1788676656"},{"product_id":"grams-performance-79-92-mazda-rx7-rx8-550cc-fuel-injectors-set-of-2","title":"Grams Performance 79-92 Mazda RX7 \/ RX8 550cc Fuel Injectors (Set of 2)","description":"\u003cp\u003eThe Grams Performance 79-92 Mazda RX7 \/ RX8 550cc Fuel Injectors (Set of 2) is designed for the 1979-1991 Mazda RX-7 and the other vehicles in the fitment table. Match manufacturer part number G2-0550-1000, the complete fuel-system configuration, dimensions, ports, electrical connector, fuel type, operating pressure, and calibration requirements before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInjector flow and quantity are exact part-number specifications\u003c\/li\u003e\n\u003cli\u003eElectrical connector, injector height, seals, and rail interface must match\u003c\/li\u003e\n\u003cli\u003eFuel type, pressure, horsepower target, and duty cycle determine sizing\u003c\/li\u003e\n\u003cli\u003eECU calibration is required for the installed injector data\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1991\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eRX-7\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, fuel system, connector, and exact product interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-1995\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eRX-7\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, fuel system, connector, and exact product interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2011\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eRX-8\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, fuel system, connector, and exact product interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eGrams Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eG2-0550-1000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eFuel Injector Sets - Rotary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInjector Flow Rate\u003c\/th\u003e\n\u003ctd\u003e550 cc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInjector Quantity\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Grams Performance fuel injector sets - rotary identified by manufacturer part number G2-0550-1000, in the quantity stated by the title. Fittings, adapters, wiring, hoses, rails, pumps, regulators, tuning, and installation hardware are included only when expressly listed for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Grams Performance\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGrams Performance develops fuel injectors, fuel-system components, intake manifolds, throttle bodies, pumps, filters, gauges, and related performance hardware for import and domestic applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Grams Performance Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/grams-performance\"\u003eShop all Grams Performance products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/grams-performance-79-92-mazda-rx7-rx8-1000cc-fuel-injectors-set-of-2\"\u003eGrams Performance 79-92 Mazda RX7 \/ RX8 1000cc Fuel Injectors (Set of 2)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/grams-performance-0-120-psi-fuel-pressure-gauge\"\u003eGrams Performance 0-120 PSI Fuel Pressure Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/grams-performance-0-30-psi-fuel-pressure-gauge\"\u003eGrams Performance 0-30 PSI Fuel Pressure Gauge\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre these injectors the correct size for my power goal?\u003c\/strong\u003e\u003cbr\u003eInjector sizing depends on horsepower, fuel type, base fuel pressure, cylinder count, and target duty cycle. Confirm the calculation with the tuner before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these injectors plug directly into my vehicle?\u003c\/strong\u003e\u003cbr\u003eMatch the exact vehicle application, injector height, rail and manifold interface, electrical connector, and required adapters. A year and model match alone does not confirm every modified fuel system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the ECU need to be tuned after installation?\u003c\/strong\u003e\u003cbr\u003eYes. Use the correct injector characterization data for the exact part number and fuel pressure. Do not operate the engine under load until calibration and leak checks are complete.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow the current Grams Performance and vehicle service instructions for part number G2-0550-1000. Relieve fuel pressure, disconnect the battery when required, compare every connector, seal, port, and mounting point before installation, and use fuel-compatible components. Pressure-test the completed system, inspect for leaks, verify fuel pressure and electrical operation, load the correct calibration data, and confirm safe operation before driving.\u003c\/p\u003e","brand":"Grams Performance","offers":[{"title":"Default Title","offer_id":41231222177871,"sku":"GRPG2-0550-1000","price":173.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/products\/grams-performance-grpg2-0550-1000-fuel-injector-sets-rotary-image-01.jpg?v=1788676693"},{"product_id":"injector-dynamics-1750-xds-93-95-mazda-rx-7-1750cc-injectors-set-of-2","title":"Injector Dynamics ID1750-XDS 14mm Fuel Injectors for Mazda RX-7 - Set of 2","description":"\u003cp\u003eThis Injector Dynamics fuel injector set, manufacturer part number 1750.11.06.60.14.2, is configured for the verified vehicle applications below. Confirm the injector rail, connector, upper and lower interface, quantity, fuel system, calibration requirements, and every application note before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExact Injector Dynamics configuration identified by manufacturer part number\u003c\/li\u003e\n\u003cli\u003eDimensions, connector, seals, adapters, and quantity are part-number specific\u003c\/li\u003e\n\u003cli\u003eFuel-system compatibility and calibration requirements must be confirmed before installation\u003c\/li\u003e\n\u003cli\u003ePackage contents include only the components expressly listed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1979-1995\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eRX-7\u003c\/td\u003e\n\u003ctd\u003eConfirm engine, rail, connector, adapter, fuel-system, and calibration requirements for this exact part number\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eInjector Dynamics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003e1750.11.06.60.14.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eFuel Injector Sets - Rotary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInjector Series\u003c\/th\u003e\n\u003ctd\u003eID1750-XDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eUSCAR unless the exact listing states an included plug-and-play adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOfficial Configuration\u003c\/th\u003e\n\u003ctd\u003e79-86 RX-7. 14mm (purple) adaptors. -204 \/ 14mm lower o-rings. Set of 2.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Injector Dynamics fuel injector set package identified by manufacturer part number 1750.11.06.60.14.2, in the exact quantity and configuration stated by the title. Fuel rails, fittings, adapters, wiring, sensors, service parts, and calibration support are included only when expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Injector Dynamics\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInjector Dynamics develops high-performance fuel injectors, fuel-system controls, filtration products, adapters, connectors, and service components with application and calibration data for supported products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Injector Dynamics Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/injector-dynamics\"\u003eShop all Injector Dynamics products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/injector-dynamics-12mm-clear-anodize-bottom-adapter-14mm-lower-o-ring\"\u003eInjector Dynamics +12mm Clear Anodize Bottom Adapter 14mm Lower O-Ring\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/injector-dynamics-14mm-bottom-adapter-14mm-lower-o-ring-black\"\u003eInjector Dynamics +14mm Bottom Adapter 14mm Lower O-Ring - Black\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/injector-dynamics-bottom-adapter-for-00-05-honda-s2000-intake-manifold-adapts-to-14mm-id\"\u003eInjector Dynamics Bottom Adapter for 00-05 Honda S2000 Intake Manifold (Adapts to 14mm ID)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these injectors work with my factory tune?\u003c\/strong\u003e\u003cbr\u003eNo. Injector calibration data and a compatible engine calibration are required. Confirm that your tuner supports the exact injector series and application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I confirm the injector fitment?\u003c\/strong\u003e\u003cbr\u003eMatch the exact part number, injector length, upper and lower interface, connector, rail configuration, quantity, and any application-specific adapters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these injectors be used with ethanol fuel?\u003c\/strong\u003e\u003cbr\u003eInjector Dynamics lists the XDS injector families for common racing and street fuels, but the entire fuel system and calibration must also be compatible with the selected fuel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRead the current Injector Dynamics instructions and calibration data for part number 1750.11.06.60.14.2. Depressurize the fuel system, work in a ventilated area away from ignition sources, inspect and lubricate seals as directed, confirm rail and connector engagement, check for leaks before starting the engine, and complete any required calibration before operation.\u003c\/p\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":46380802670671,"sku":"IDX1750.11.06.60.14.2","price":669.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/injector-dynamics-idx1750-11-06-60-14-2-fuel-injector-sets-rotary-image-01.jpg?v=1788709965"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/collections\/fuel-injector-sets-rotary.jpg?v=1782252439","url":"https:\/\/www.blackopsautoworks.com\/en-ca\/collections\/fuel-injector-sets-rotary.oembed","provider":"Black Ops Auto Works","version":"1.0","type":"link"}