{"product_id":"yukon-za-g26018080-axle-1991-1996-chevrolet-caprice-impala-8-5in","title":"Yukon Gear \u0026 Axle USA Standard Axle For 91-96 Caprice \u0026 91-93 Impala","description":"\u003cp\u003eYukon Gear \u0026amp; Axle USA Standard Axle For 91-96 Caprice \u0026amp; 91-93 Impala is the exact Yukon Gear \u0026amp; Axle axles identified by manufacturer part number ZA G26018080. Match the part number, vehicle, axle housing, differential, spline count, gear ratio, carrier break, position, dimensions, and intended use before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x USA Standard Gear ZA G26018080 Rear Axle Shaft\u003c\/li\u003e\n\u003cli\u003eRaise the vehicle and support it at the rear frame or axle housing using appropriately rated jack stands. Remove the wheel on the side being serviced.\u003c\/li\u003e\n\u003cli\u003eRemove the brake drum (for drum brake applications) or the caliper and rotor (for disc brake applications). Secure the caliper so it does not hang by the brake hose.\u003c\/li\u003e\n\u003cli\u003eRemove the differential cover and drain the gear oil into a suitable container.\u003c\/li\u003e\n\u003cli\u003eRemove the pinion shaft retaining bolt and slide the pinion shaft out of the carrier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVerified catalog applications: 1991-1993 Chevrolet Impala, 1991-1996 Chevrolet Caprice. Confirm axle housing, differential, spline count, gear ratio, carrier break, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1991-1993\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eImpala\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1991-1996\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eYukon Gear \u0026amp; Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd\u003eZA G26018080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eYUKZA G26018080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUPC\u003c\/th\u003e\n\u003ctd\u003e883584351078\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eAxles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment Type\u003c\/th\u003e\n\u003ctd\u003eVehicle Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCatalog Status\u003c\/th\u003e\n\u003ctd\u003eManufacturer Verification Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eOne new Yukon Gear \u0026amp; Axle axles identified by manufacturer part number ZA G26018080, plus only the bearings, seals, shims, fasteners, and hardware expressly supplied for this exact part number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbout Yukon Gear \u0026amp; Axle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYukon Gear \u0026amp; Axle develops ring and pinion sets, axles, differentials, bearings, seals, installation kits, and drivetrain service components for street, towing, off-road, and performance applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRelated Yukon Gear \u0026amp; Axle Products\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/collections\/yukon-gear-axle\"\u003eShop all Yukon Gear \u0026amp; Axle products\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/usa-standard-4340-chrome-moly-rplcmnt-axle-for-dana-44-rh-inner-uses-5-760x-u-joint\"\u003eYukon Gear \u0026amp; Axle USA Standard 4340 Chrome Moly Rplcmnt Axle For Dana 44 \/ RH Inner \/ Uses 5-760X U\/Joint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/usa-standard-4340-chrome-moly-axle-xj-tj-yj-rh-inner-27spl-uses-5-760x-u-joint\"\u003eYukon Gear \u0026amp; Axle USA Standard 4340 Chrome-Moly Axle \/ XJ\/TJ\/YJ RH Inner \/ 27Spl \/ Uses 5-760X U\/Joint\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-ca\/products\/usa-standard-4340-chrome-moly-axle-kit-for-79-87-gm-truck-blazer-gm-8-5in-30-spline\"\u003eYukon Gear \u0026amp; Axle USA Standard 4340 Chrome-Moly Axle Kit For 79-87 GM Truck \u0026amp; Blazer \/ GM 8.5in \/ 30 Spline\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill Yukon Gear \u0026amp; Axle ZA G26018080 fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eVerified catalog applications: 1991-1993 Chevrolet Impala, 1991-1996 Chevrolet Caprice. Confirm axle housing, differential, spline count, gear ratio, carrier break, position, and manufacturer exclusions for the exact vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat should I verify before ordering?\u003c\/strong\u003e\u003cbr\u003eVerify the exact part number, vehicle, axle housing, differential, spline count, gear ratio, carrier break, bearing dimensions, position, intended use, and manufacturer exclusions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included?\u003c\/strong\u003e\u003cbr\u003eThe package contains only the Yukon Gear \u0026amp; Axle components and hardware specified for part number ZA G26018080. Related bearings, seals, fluids, tools, and service parts are sold separately unless expressly listed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFollow Yukon Gear \u0026amp; Axle's current instructions for part number ZA G26018080. Confirm all measurements and clearances, inspect mating components, set bearing preload and gear backlash where applicable, verify contact pattern, use specified lubricants and torque values, and have precision differential work completed by a qualified drivetrain technician.\u003c\/p\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":45974397845583,"sku":"YUKZA G26018080","price":190.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/yukon-gear-axle-yukza-g26018080-product-image-01-7777518671.png?v=1790716814","url":"https:\/\/www.blackopsautoworks.com\/en-ca\/products\/yukon-za-g26018080-axle-1991-1996-chevrolet-caprice-impala-8-5in","provider":"Black Ops Auto Works","version":"1.0","type":"link"}