{"product_id":"action-clutch-stage-5-2ms-clutch-kit-1991-1995-toyota-mr2-turbo","title":"Action Clutch Stage 5 2MS Clutch Kit for 1991 to 1995 Toyota MR2 Turbo","description":"\u003ch4\u003eRace Ready Clutch Control for a Turbo MR2\u003c\/h4\u003e\n\u003cp\u003eThis Stage 5 clutch kit is built for 1991 to 1995 Toyota MR2 models with the 2.0L 3S-GTE turbo engine and manual transmission. Its sprung MIBA ceramic disc and dual clamp load pressure plate are intended for race applications and heavy track use, with light street use after the required break in. The manufacturer part number is ACR-2101.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStage 5 2MS clutch system with a six puck sprung MIBA ceramic disc\u003c\/li\u003e\n\u003cli\u003eDual clamp load heavy duty pressure plate with reinforced drive straps\u003c\/li\u003e\n\u003cli\u003eDuctile iron friction plate with four stage heat treated diaphragm springs\u003c\/li\u003e\n\u003cli\u003eAmerican grade rivets used in the pressure plate and disc assembly\u003c\/li\u003e\n\u003cli\u003eFully enclosed spring retainers to help contain the disc springs\u003c\/li\u003e\n\u003cli\u003eSprung hub for controlled engagement\u003c\/li\u003e\n\u003cli\u003eOne hundred percent dynamically spin balanced assembly\u003c\/li\u003e\n\u003cli\u003eRated at a 200 percent increase in holding capacity over the factory kit, measured at crank torque\u003c\/li\u003e\n\u003cli\u003eDesigned for race applications and heavy track use, with light street use\u003c\/li\u003e\n\u003cli\u003eSFI 1.1 specification\u003c\/li\u003e\n\u003cli\u003eACR-2101 identifies the exact six puck Toyota MR2 turbo application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eDrivetrain\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1991 to 1995\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eMR2\u003c\/td\u003e\n\u003ctd\u003e2.0L 3S-GTE turbo\u003c\/td\u003e\n\u003ctd\u003eManual transmission\u003c\/td\u003e\n\u003ctd\u003eTurbo application only\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eConfirm the model years, Toyota MR2 application, 2.0L 3S-GTE turbo engine, and manual transmission before ordering. The ACR-2101 application is not intended for a non turbo engine or an automatic transmission.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct line\u003c\/td\u003e\n\u003ctd\u003eAction Clutch Stage 5 2MS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003eACR-2101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFriction disc\u003c\/td\u003e\n\u003ctd\u003eSprung MIBA ceramic, six puck configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure plate\u003c\/td\u003e\n\u003ctd\u003eDual clamp load heavy duty design with reinforced drive straps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFriction plate\u003c\/td\u003e\n\u003ctd\u003eDuctile iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiaphragm springs\u003c\/td\u003e\n\u003ctd\u003eFour stage heat treated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring retainers\u003c\/td\u003e\n\u003ctd\u003eFully enclosed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisc hub\u003c\/td\u003e\n\u003ctd\u003eSprung\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRivets\u003c\/td\u003e\n\u003ctd\u003eAmerican grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBalance\u003c\/td\u003e\n\u003ctd\u003eOne hundred percent dynamically spin balanced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolding capacity\u003c\/td\u003e\n\u003ctd\u003e200 percent increase over the factory kit, rated at crank torque\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003eSFI 1.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRace applications and heavy track use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLight street use\u003c\/td\u003e\n\u003ctd\u003ePermitted only after proper break in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage weight\u003c\/td\u003e\n\u003ctd\u003e17 pounds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage dimensions\u003c\/td\u003e\n\u003ctd\u003e13 by 13 by 4 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStage 5 MIBA sprung clutch disc, six puck configuration\u003c\/li\u003e\n\u003cli\u003eDual heavy duty pressure plate\u003c\/li\u003e\n\u003cli\u003eRelease bearing\u003c\/li\u003e\n\u003cli\u003ePilot bearing or bushing when applicable\u003c\/li\u003e\n\u003cli\u003eClutch alignment tool\u003c\/li\u003e\n\u003cli\u003eInformation sheet\u003c\/li\u003e\n\u003cli\u003eAction Clutch swag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Action Clutch\u003c\/h4\u003e\n\u003cp\u003eAction Clutch produces performance clutch and flywheel systems for street, track, and race vehicles. Its Stage 5 2MS system combines high performance MIBA ceramic friction material with a dual clamp load pressure plate, reinforced drive straps, and enclosed spring retainers for aggressive applications.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the ACR-2101?\u003c\/strong\u003e\n\u003cp\u003eIt identifies this Stage 5 2MS clutch kit for the specified Toyota MR2 turbo application. Match the vehicle details before ordering.\u003c\/p\u003e\n\u003cstrong\u003eWill this fit my Toyota MR2?\u003c\/strong\u003e\n\u003cp\u003eIt fits 1991 to 1995 Toyota MR2 models with the 2.0L 3S-GTE turbo engine and a manual transmission. It does not fit a non turbo engine or an automatic transmission.\u003c\/p\u003e\n\u003cstrong\u003eWhat clutch disc configuration is included?\u003c\/strong\u003e\n\u003cp\u003eThe package includes a six puck sprung ceramic disc. Ceramic material provides aggressive engagement and increased holding capacity for track focused use.\u003c\/p\u003e\n\u003cstrong\u003eHow much holding capacity does the kit provide?\u003c\/strong\u003e\n\u003cp\u003eThe stated increase is 200 percent over the factory kit, measured at crank torque. Actual results depend on engine output, vehicle setup, and driving conditions.\u003c\/p\u003e\n\u003cstrong\u003eIs this suitable for daily driving?\u003c\/strong\u003e\n\u003cp\u003eIt is designed for race applications and heavy track use, with light street use after proper break in. Ceramic friction material can feel harsher and less forgiving than an organic street clutch.\u003c\/p\u003e\n\u003cstrong\u003eDoes the listed package include a flywheel?\u003c\/strong\u003e\n\u003cp\u003eA flywheel is not included in the listed package contents. Inspect the existing flywheel and resurface or replace it as needed before installation.\u003c\/p\u003e\n\u003cstrong\u003eWhat bearings are included?\u003c\/strong\u003e\n\u003cp\u003eThe listed contents include a release bearing and a pilot bearing or bushing when applicable. Confirm the vehicle requirement before installation.\u003c\/p\u003e\n\u003cstrong\u003eWhat break in procedure should I follow?\u003c\/strong\u003e\n\u003cp\u003eDrive about 500 street miles while keeping engine speed below 4,500 rpm, using no more than half throttle, and using no boost when applicable. Avoid hard launches and track use until the disc is bedded.\u003c\/p\u003e\n\u003cstrong\u003eCan clutch chatter occur?\u003c\/strong\u003e\n\u003cp\u003eSome chatter can occur during early use because of the ceramic friction material. It should be minimal after the disc is correctly bedded in.\u003c\/p\u003e\n\u003cstrong\u003eDoes the package include installation hardware?\u003c\/strong\u003e\n\u003cp\u003eThe listed contents include a clutch alignment tool, release bearing, pilot bearing or bushing when applicable, an information sheet, and Action Clutch swag. Verify any vehicle specific bolts or replacement hardware separately.\u003c\/p\u003e\n\u003cstrong\u003eWhat should I verify before ordering?\u003c\/strong\u003e\n\u003cp\u003eConfirm the model year, Toyota MR2 model, 2.0L 3S-GTE turbo engine, manual transmission, and intended use. A different engine, transmission, or model year can require a different clutch application.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eConfirm the vehicle application and match the order to ACR-2101 before opening the package.\u003c\/li\u003e\n\u003cli\u003eDisconnect the battery, chock the wheels, raise the vehicle, and support it securely on rated stands.\u003c\/li\u003e\n\u003cli\u003eRemove the components that block transmission removal, then disconnect the shift linkage, clutch hydraulics, wiring, and sensors connected to the transmission.\u003c\/li\u003e\n\u003cli\u003eSupport the engine and transmission, remove the mount and cross member, then separate the transmission from the engine.\u003c\/li\u003e\n\u003cli\u003eRemove the pressure plate evenly, take out the old disc, and inspect the release fork, pivot, pilot bearing, and rear main seal.\u003c\/li\u003e\n\u003cli\u003eInspect the flywheel for heat damage, warping, or glazing. Resurface or replace it when needed, then clean the friction surface with suitable brake cleaner.\u003c\/li\u003e\n\u003cli\u003ePlace the new disc in the correct direction with the alignment tool, then position the pressure plate over the locating dowels.\u003c\/li\u003e\n\u003cli\u003eTighten the pressure plate in stages using the vehicle service manual sequence and torque specification. Remove the alignment tool after the pressure plate is secure.\u003c\/li\u003e\n\u003cli\u003eInstall the release bearing and the pilot bearing or bushing when applicable. Inspect the fork and pivot, then apply only the lubricant specified for the contact points.\u003c\/li\u003e\n\u003cli\u003eReinstall the transmission, mount, cross member, linkage, hydraulics, wiring, and sensors. Refill the transmission fluid and bleed the clutch hydraulic system.\u003c\/li\u003e\n\u003cli\u003eComplete the break in with about 500 street miles below 4,500 rpm, at no more than half throttle, and with no boost when applicable. Avoid hard launches and track use until the friction material is bedded.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eProp 65 Warning\u003c\/h4\u003e\n\u003cp\u003eWARNING: California residents. This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. www.P65Warnings.ca.gov\u003c\/p\u003e","brand":"Action Clutch","offers":[{"title":"Default Title","offer_id":46504283439183,"sku":"AONACR-2101","price":485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/action-clutch-acr-2101-stage-5-2ms-toyota-mr2-turbo.png?v=1787961051","url":"https:\/\/www.blackopsautoworks.com\/products\/action-clutch-stage-5-2ms-clutch-kit-1991-1995-toyota-mr2-turbo","provider":"Black Ops Auto Works","version":"1.0","type":"link"}