{"product_id":"ams-performance-toyota-t24a-billet-throttle-body-inlet","title":"AMS Billet Throttle Body Inlet for Toyota T24A Turbo","description":"\u003ch4\u003eRemove the last restriction before the throttle body\u003c\/h4\u003e\u003cp\u003eAMS Performance AMS.60.08.0001-1 replaces the restrictive factory inlet elbow on Toyota's 2.4-liter T24A-FTS turbocharged engine. Its one-piece 6061-aluminum passage maintains a 60 mm internal diameter from the charge-pipe flange to the throttle body, giving the turbocharger a more direct airflow path without requiring an ECU calibration.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e60 mm internal diameter through the inlet passage\u003c\/li\u003e\n\u003cli\u003e70 percent more cross-sectional area than the narrowest portion of the factory elbow\u003c\/li\u003e\n\u003cli\u003eOne-piece 6061 billet-aluminum construction with no welded seams in the flow path\u003c\/li\u003e\n\u003cli\u003eRe-engineered bend angle directs airflow more smoothly into the throttle body\u003c\/li\u003e\n\u003cli\u003eAMS flow-bench testing recorded up to 85 percent less pressure drop than the factory inlet at the tested airflow point\u003c\/li\u003e\n\u003cli\u003eAMS dyno testing on a stock-tune 2024 Tacoma using 93-octane fuel recorded gains across the powerband, reaching a 15-wheel-horsepower peak\u003c\/li\u003e\n\u003cli\u003eCompatible with factory and AMS charge pipes\u003c\/li\u003e\n\u003cli\u003eAMS Performance AMS.60.08.0001-1 requires no cutting, trimming, or ECU calibration and can be returned to stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eApplication details and restrictions\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine and Powertrain\u003c\/th\u003e\n\u003cth\u003eVerified Configurations\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024 and newer\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003ctd\u003e2.4L T24A-FTS turbo; gas i-FORCE or hybrid i-FORCE MAX\u003c\/td\u003e\n\u003ctd\u003eSR, SR5, TRD PreRunner, TRD Sport, TRD Off-Road, Limited, Trailhunter, TRD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024 and newer\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eLand Cruiser\u003c\/td\u003e\n\u003ctd\u003e2.4L T24A-FTS turbo hybrid i-FORCE MAX only\u003c\/td\u003e\n\u003ctd\u003e1958, Base, First Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025 and newer\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e4Runner\u003c\/td\u003e\n\u003ctd\u003e2.4L T24A-FTS turbo; gas i-FORCE or hybrid i-FORCE MAX\u003c\/td\u003e\n\u003ctd\u003eSR5, TRD Sport, TRD Off-Road, TRD Sport Premium, TRD Off-Road Premium, Limited, Platinum, Trailhunter, TRD Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eAMS has not completed CARB or EPA compliance testing for this product. It is not available for emissions-controlled vehicles located in California or for shipment to California addresses without a completed AMS Race Waiver. International owners must follow local laws. The factory sealing ring and mounting bracket transfer to the new inlet, and installation access differs between gas and hybrid vehicles.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd\u003eAMS.60.08.0001-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eBillet throttle body inlet elbow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSingle-piece 6061 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Diameter\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharge-Pipe Compatibility\u003c\/td\u003e\n\u003ctd\u003eFactory or AMS charge pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalibration Requirement\u003c\/td\u003e\n\u003ctd\u003eNo ECU calibration required by AMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCutting or Trimming\u003c\/td\u003e\n\u003ctd\u003eNone required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePublished Weight\u003c\/td\u003e\n\u003ctd\u003e1.85 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePublished Package Dimensions\u003c\/td\u003e\n\u003ctd\u003e9 × 6.5 × 4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmissions Status\u003c\/td\u003e\n\u003ctd\u003eCARB and EPA compliance testing not completed; California restrictions apply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalifornia Proposition 65\u003c\/td\u003e\n\u003ctd\u003eManufacturer warning applies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne AMS Performance AMS.60.08.0001-1 billet throttle body inlet\u003c\/li\u003e\n\u003cli\u003eAMS installation instructions\u003c\/li\u003e\n\u003cli\u003eThe factory mounting bracket and factory sealing ring must be transferred from the original inlet and are not included as new replacement parts\u003c\/li\u003e\n\u003cli\u003eCharge pipe, throttle body, tools, and unrelated engine components are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout AMS Performance\u003c\/h4\u003e\u003cp\u003eAMS Performance develops forced-induction systems and airflow components through its SnailWorks engineering program. For this inlet, AMS used scans of the factory parts, mass-airflow flow-bench measurements, and back-to-back chassis-dyno testing to address the restriction immediately ahead of the T24A-FTS throttle body.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eNo related product is linked because charge-pipe and sealing components must be verified against AMS.60.08.0001-1, the exact vehicle, and the installed intake configuration.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the AMS.60.08.0001-1?\u003c\/strong\u003e\u003cp\u003eIt is AMS Performance's one-piece billet replacement for the restrictive factory throttle body inlet elbow on supported Toyota T24A-FTS turbo applications.\u003c\/p\u003e\u003cstrong\u003eWhich Toyota engines does this inlet fit?\u003c\/strong\u003e\u003cp\u003eIt fits the 2.4-liter T24A-FTS turbocharged engine in the listed Tacoma, Land Cruiser, and 4Runner applications, subject to the powertrain requirements in the fitment table.\u003c\/p\u003e\u003cstrong\u003eDoes it fit both gas and hybrid Tacoma models?\u003c\/strong\u003e\u003cp\u003eYes. AMS lists both gas i-FORCE and hybrid i-FORCE MAX Tacoma configurations. The installation sequence differs because hybrid models skip the belt and alternator removal steps.\u003c\/p\u003e\u003cstrong\u003eDoes it fit every current Land Cruiser powertrain?\u003c\/strong\u003e\u003cp\u003eAMS lists the 2.4-liter turbo hybrid i-FORCE MAX Land Cruiser application. Do not extend fitment to an unlisted engine or powertrain.\u003c\/p\u003e\u003cstrong\u003eWill it connect to the factory charge pipe?\u003c\/strong\u003e\u003cp\u003eYes. AMS states that the inlet works with the factory charge pipe and its compatible AMS charge pipe.\u003c\/p\u003e\u003cstrong\u003eIs an ECU calibration required?\u003c\/strong\u003e\u003cp\u003eNo. AMS states that no ECU calibration is required for this inlet.\u003c\/p\u003e\u003cstrong\u003eCan the vehicle be returned to stock?\u003c\/strong\u003e\u003cp\u003eYes. The installation is reversible because no cutting or trimming is required, provided the original inlet and transferred factory parts are retained.\u003c\/p\u003e\u003cstrong\u003eCan this product be shipped for a California emissions-controlled vehicle?\u003c\/strong\u003e\u003cp\u003eNot without the manufacturer-required AMS Race Waiver. AMS states that CARB and EPA compliance testing has not been completed for this product.\u003c\/p\u003e\u003cstrong\u003eWhich factory parts are reused?\u003c\/strong\u003e\u003cp\u003eThe mounting bracket, sealing ring, and applicable factory hardware transfer from the original throttle body inlet as directed by AMS.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eDisconnect the negative battery terminal and allow the engine to cool.\u003c\/li\u003e\n\u003cli\u003eUnlock the spring clips at the intercooler and throttle-body ends of the driver-side charge pipe, then remove the charge pipe.\u003c\/li\u003e\n\u003cli\u003eOn non-hybrid models, compress and retain the serpentine-belt tensioner, remove the belt, unclip the engine harness, disconnect the alternator harness and power wire, and remove the alternator. Hybrid models skip these belt and alternator steps.\u003c\/li\u003e\n\u003cli\u003eRemove the bolt that secures the throttle-body inlet bracket to the engine and the two front inlet bolts.\u003c\/li\u003e\n\u003cli\u003eAccess and remove the two rear inlet bolts from underneath the vehicle, then remove the factory inlet through the top of the engine bay.\u003c\/li\u003e\n\u003cli\u003eTransfer the factory bracket and sealing ring from the original inlet to the AMS inlet.\u003c\/li\u003e\n\u003cli\u003ePosition the new inlet and gently walk the bolt nearest the bracket past the housing before threading it.\u003c\/li\u003e\n\u003cli\u003eReinstall the remaining components in reverse order, lock both charge-pipe spring clips, reconnect the battery, and verify secure connections and leak-free operation before driving.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"AMS","offers":[{"title":"Default Title","offer_id":68236886343759,"sku":"AMSAMS.60.08.0001-1","price":299.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/ams-performance-ams-60-08-0001-1-t24a-throttle-body-inlet-01.webp?v=1795104298","url":"https:\/\/www.blackopsautoworks.com\/products\/ams-performance-toyota-t24a-billet-throttle-body-inlet","provider":"Black Ops Auto Works","version":"1.0","type":"link"}