{"product_id":"anderson-composites-2005-2009-ford-mustang-type-oe-style-hood","title":"Anderson Composites 2005-2009 Ford Mustang Type-OE Style Hood","description":"\u003ch4\u003eThe Oem-Style Direct Replacement Hood Built for the 2005-2009 Ford Mustang\u003c\/h4\u003e\n\u003cp\u003eThe AC-HD0506FDMU-OE is a precision-engineered carbon fiber hood for the 2005-2009 Ford Mustang, delivering the iconic carbon weave with up to 50% weight savings over the factory steel panel. Built from 3K 2x2 twill carbon fiber via a vacuum-infused wet layup, this OEM-style direct replacement hood uses your existing hinge bolts and factory mounting points for a true bolt-on swap. No cutting, no drilling, and no body modification required. The AC-HD0506FDMU-OE is the right call when you want a hood that performs as well as it looks, whether that means shaving weight for a track day or stepping up the street presence of your build.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 3K 2x2 twill carbon fiber, vacuum-infused wet layup\u003c\/li\u003e\n\u003cli\u003eFinish: marine-grade gel coat with UV inhibitors, hand-polished to a gloss finish\u003c\/li\u003e\n\u003cli\u003eFiberglass skeleton bonded to the underside for structural rigidity\u003c\/li\u003e\n\u003cli\u003eWeight savings: up to 50% vs. OEM steel hood\u003c\/li\u003e\n\u003cli\u003eHood style: OEM-style direct replacement\u003c\/li\u003e\n\u003cli\u003eBolt-on installation using OEM hinge hardware and factory mounting points\u003c\/li\u003e\n\u003cli\u003eHood pins required for all street and track driving applications\u003c\/li\u003e\n\u003cli\u003eOE gas struts not compatible, use a hood prop rod\u003c\/li\u003e\n\u003cli\u003eHeat shield transfer required during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2009\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eSee title for trim details\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eAC-HD0506FDMU-OE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAnderson Composites\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e3K 2x2 twill carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction Process\u003c\/td\u003e\n\u003ctd\u003evacuum-infused wet layup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Finish\u003c\/td\u003e\n\u003ctd\u003emarine-grade gel coat with UV inhibitors, hand-polished to a gloss finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Savings\u003c\/td\u003e\n\u003ctd\u003eUp to 50% vs. OEM steel hood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHood Style\u003c\/td\u003e\n\u003ctd\u003eOem-Style Direct Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDirect bolt-on, uses OEM hinge hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHood Pins\u003c\/td\u003e\n\u003ctd\u003eRequired (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat Shield\u003c\/td\u003e\n\u003ctd\u003eTransfer from OEM hood (required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnderson Composites carbon fiber hood (AC-HD0506FDMU-OE)\u003c\/li\u003e\n\u003cli\u003eOEM hinge hardware not included, reuses factory bolts\u003c\/li\u003e\n\u003cli\u003eHood pins not included, purchase separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\n\u003cstrong\u003eDoes this hood require drilling or cutting to install?\u003c\/strong\u003e\n\u003cp\u003eNo. This hood is precision-molded from the factory panel and uses the existing hinge bolts and OEM mounting points. Minor bump stop adjustments are normal during final fitment, but no structural body modification is required.\u003c\/p\u003e\n\n\u003cstrong\u003eAre hood pins required on a carbon fiber hood?\u003c\/strong\u003e\n\u003cp\u003eYes, and Anderson Composites requires them. Carbon fiber hoods are significantly lighter than steel, which means aerodynamic lift at speed can overcome the factory latch. AeroCatch and Quic-Latch flush-mount systems are popular options that keep the look clean.\u003c\/p\u003e\n\n\u003cstrong\u003eCan I reuse my OE gas struts?\u003c\/strong\u003e\n\u003cp\u003eNo. Anderson Composites strongly advises against reinstalling OE gas struts or dampers on any composite hood. The pressure these shocks apply can crack the panel over time. Use a hood prop rod instead, and always close the hood carefully by hand.\u003c\/p\u003e\n\n\u003cstrong\u003eIs a heat shield required?\u003c\/strong\u003e\n\u003cp\u003eYes. Transfer the OEM heat shield to the new hood during installation. If the hood style prevents a direct transfer, an aftermarket universal heat shield is available at most performance retailers. Never run a carbon fiber hood without heat protection between the panel and the engine bay.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat is the difference between standard carbon fiber and dry carbon?\u003c\/strong\u003e\n\u003cp\u003eStandard wet-layup carbon fiber uses 3K 2x2 twill weave over a fiberglass backing, vacuum-infused with resin, achieving up to 50% weight savings with a gloss gel coat finish. Dry carbon is pre-preg, cured in an autoclave under extreme heat and pressure, bonding the resin directly into the fiber structure for up to 70% weight savings and higher stiffness. Dry carbon is the same process used in Formula 1 and aerospace manufacturing.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat finish does the 2005-2009 Ford Mustang carbon fiber hood have?\u003c\/strong\u003e\n\u003cp\u003eThe hood arrives with a hand-polished marine-grade gel coat finish that has UV inhibitors built in. No additional clear coat is required, though applying a paint sealant or 2K clear coat over the gel coat adds an extra layer of scratch protection.\u003c\/p\u003e\n\n\u003cstrong\u003eWill this hood fit all trim levels of the Mustang?\u003c\/strong\u003e\n\u003cp\u003eRefer to the fitment table above for confirmed year ranges and trim compatibility. Minor adjustments to bump stops and hinge alignment are normal during final installation. For the cleanest result, professional installation by a shop experienced with composite panels is recommended.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes Anderson Composites offer a warranty?\u003c\/strong\u003e\n\u003cp\u003eAnderson Composites backs their hoods with a limited manufacturer warranty covering defects in materials and workmanship. The warranty does not cover damage from slamming, gas strut use, failure to install hood pins, or improper installation. Contact Anderson Composites directly for full warranty documentation.\u003c\/p\u003e\n\n\u003cstrong\u003eHow long does installation take?\u003c\/strong\u003e\n\u003cp\u003eMost experienced installers complete the swap in one to two hours. This includes removing the OEM hood, transferring the heat shield and latch hardware, test-fitting, and doing final gap alignment. Budget extra time if transferring the windshield washer nozzle system.\u003c\/p\u003e\n\n\u003cstrong\u003eCan this hood be painted?\u003c\/strong\u003e\n\u003cp\u003eYes. The gel coat surface accepts standard automotive paint. Sand lightly, apply a flexible composite primer, then basecoat and 2K clear coat for a factory color match. Many owners also run the natural gloss carbon weave.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Overview\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eProtect fenders with moving blankets or foam pads before starting\u003c\/li\u003e\n\u003cli\u003eRemove the OE gas strut, windshield washer nozzle assembly, and hood insulation clips\u003c\/li\u003e\n\u003cli\u003eWith a partner, unbolt the OEM hood from the hinges and set it safely aside\u003c\/li\u003e\n\u003cli\u003eTest-fit the new hood on the hinges without tightening to verify alignment\u003c\/li\u003e\n\u003cli\u003eTransfer the OEM heat shield, enlarging mounting holes with a file or dremel as needed\u003c\/li\u003e\n\u003cli\u003eTransfer the windshield washer hose and frame to the new hood\u003c\/li\u003e\n\u003cli\u003eTransfer the OEM striker from the factory hood\u003c\/li\u003e\n\u003cli\u003eBolt the hood to the hinges and adjust for even gap on both sides\u003c\/li\u003e\n\u003cli\u003eAdjust bump stops for proper height flush with the fender\u003c\/li\u003e\n\u003cli\u003eInstall hood pins per the kit instructions before any driving\u003c\/li\u003e\n\u003cli\u003eClose the hood carefully by hand, never slam or drop a composite panel\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Anderson Composites","offers":[{"title":"Default Title","offer_id":41143376773199,"sku":"ANDAC-HD0506FDMU-OE","price":1529.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/ac-hd0506fdmu-oe_01.jpg?v=1762450491","url":"https:\/\/www.blackopsautoworks.com\/products\/anderson-composites-2005-2009-ford-mustang-type-oe-style-hood","provider":"Black Ops Auto Works","version":"1.0","type":"link"}