{"product_id":"anderson-composites-2014-2015-chevrolet-camaro-type-oe-decklid","title":"Anderson Composites 2014–2015 Camaro OE Dry Carbon Decklid","description":"\u003ch4\u003eLightweight Dry Carbon Decklid That Transforms the Rear of Your 2014  Camaro\u003c\/h4\u003e\n\u003cp\u003eThe AC-TL14CHCAM-OE is an Anderson Composites dry carbon trunk lid built specifically for the 2014  Camaro, built with the same pre-preg autoclave process used in Formula 1, aerospace, and elite endurance motorsport, achieving up to 70% weight savings. Constructed from pre-preg 3K 2x2 twill carbon fiber, autoclave-cured via a pre-preg layup cured in an autoclave under extreme heat and pressure, this decklid installs using your factory hinge bolts and latch hardware with no modification required. Up to 70% weight savings over the OEM steel panel translates directly into improved front-to-rear balance and power-to-weight ratio, the kind of gain that costs nothing in drivability and pays back every time the car moves.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: pre-preg 3K 2x2 twill carbon fiber, autoclave-cured, pre-preg layup cured in an autoclave under extreme heat and pressure\u003c\/li\u003e\n\u003cli\u003eFinish: matte dry carbon surface, resin pre-impregnated directly into the fiber structure, no additional clear coat required\u003c\/li\u003e\n\u003cli\u003ePre-impregnated resin fully bonded into the fiber structure under autoclave pressure for maximum density and stiffness\u003c\/li\u003e\n\u003cli\u003eWeight savings: up to 70% vs. OEM steel decklid\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on using factory hinge and latch hardware\u003c\/li\u003e\n\u003cli\u003ePreserves factory trunk release, power trunk, and spoiler mounting provisions\u003c\/li\u003e\n\u003cli\u003ePrecision-molded from OEM panel for exact body line match\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSee title for trim details\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eAC-TL14CHCAM-OE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAnderson Composites\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003epre-preg 3K 2x2 twill carbon fiber, autoclave-cured\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003epre-preg layup cured in an autoclave under extreme heat and pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurface Finish\u003c\/td\u003e\n\u003ctd\u003ematte dry carbon surface, resin pre-impregnated directly into the fiber structure, no additional clear coat required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Savings\u003c\/td\u003e\n\u003ctd\u003eUp to 70% vs. OEM steel decklid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDirect bolt-on, OEM hinge hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAnderson Composites dry carbon trunk lid (AC-TL14CHCAM-OE)\u003c\/li\u003e\n\u003cli\u003eOEM hinge hardware not included, reuses factory bolts and latch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\n\u003cstrong\u003eDoes the AC-TL14CHCAM-OE preserve factory trunk release and latch function?\u003c\/strong\u003e\n\u003cp\u003eYes. The decklid is built around the OEM latch and release geometry. Factory power trunk release, key fob function, and interior handle all operate normally with this lid installed.\u003c\/p\u003e\n\n\u003cstrong\u003eCan I mount a factory or aftermarket spoiler on this trunk lid?\u003c\/strong\u003e\n\u003cp\u003eYes. Anderson Composites preserves factory spoiler mounting provisions. OEM spoilers transfer directly, and Anderson Composites' own carbon spoilers are designed to pair with this trunk lid for a fully coordinated rear setup.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat actual weight savings can I expect?\u003c\/strong\u003e\n\u003cp\u003eAnderson Composites dry carbon construction saves up to 70% over the factory steel panel. On most Camaro platforms the OEM steel decklid weighs between 20 and 40 pounds, so the reduction in high-mounted rear mass is meaningful for both handling balance and power-to-weight ratio.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes this trunk lid work with my backup camera?\u003c\/strong\u003e\n\u003cp\u003eOn vehicles where the backup camera is in the rear bumper or license plate area there is no conflict. On vehicles with a camera integrated into the factory trunk lid, verify the camera mounting location relative to the new lid before ordering.\u003c\/p\u003e\n\n\u003cstrong\u003eHow do I maintain the finish?\u003c\/strong\u003e\n\u003cp\u003eKeep dry carbon out of prolonged direct UV exposure when parked. Wipe with a microfiber cloth and mild soap. Avoid abrasive polishes and automatic car washes with stiff brushes.\u003c\/p\u003e\n\n\u003cstrong\u003eIs this trunk lid street legal?\u003c\/strong\u003e\n\u003cp\u003eYes. It is a direct OEM-style replacement panel and does not alter any safety systems. It is fully street legal in all 50 states. California residents should note the Prop 65 disclosure at the bottom of this page.\u003c\/p\u003e\n\n\u003cstrong\u003eCan the decklid be painted?\u003c\/strong\u003e\n\u003cp\u003eThe dry carbon surface can be painted with a flexible composite primer and compatible topcoat, though most owners leave the natural matte finish.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes Anderson Composites warranty trunk lids?\u003c\/strong\u003e\n\u003cp\u003eYes. A limited manufacturer warranty covers materials and workmanship defects. Impact damage, improper installation, and damage from slamming the lid are excluded. Contact Anderson Composites for full warranty documentation.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Overview\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eOpen the factory trunk and support the vehicle on a level surface\u003c\/li\u003e\n\u003cli\u003eDisconnect any OEM trunk damper or strut if present\u003c\/li\u003e\n\u003cli\u003eWith a partner, support the factory decklid and unbolt it from the hinges\u003c\/li\u003e\n\u003cli\u003eTransfer latch, striker, and spoiler hardware from the OEM lid to the AC-TL14CHCAM-OE\u003c\/li\u003e\n\u003cli\u003eWith a partner, bolt the new decklid to the hinges without final tightening\u003c\/li\u003e\n\u003cli\u003eAdjust hinge position for even gap on both sides and correct height flush with the body\u003c\/li\u003e\n\u003cli\u003eTighten all hinge bolts to factory torque specification\u003c\/li\u003e\n\u003cli\u003eTest the latch, release, and spoiler function before returning the vehicle to service\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Anderson Composites","offers":[{"title":"Default Title","offer_id":41143479205967,"sku":"ANDAC-TL14CHCAM-OE","price":1169.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/ac-tl14chcam-oe_01.jpg?v=1761840478","url":"https:\/\/www.blackopsautoworks.com\/products\/anderson-composites-2014-2015-chevrolet-camaro-type-oe-decklid","provider":"Black Ops Auto Works","version":"1.0","type":"link"}