{"product_id":"awe-3025-33306-switchpath-cat-back-2024-ford-ranger-raptor","title":"AWE 2024+ Ford Ranger Raptor 3.0L Switchpath Cat-Back Exhaust - Diamond Black Tips","description":"\u003ch4\u003eTwo Exhaust Personalities in One Bolt-On Kit for the 2024+ Ford Ranger Raptor 3.0L\u003c\/h4\u003e\n\u003cp\u003eThe AWE 3025-33306 SwitchPath Cat-Back Exhaust gives the 2024+ Ford Ranger Raptor a fully controlled dual soundtrack without modifying any factory wiring or electronics. Close the valve for a refined, highway-friendly tone.\u003c\/p\u003e\n\u003cp\u003eOpen it for a deep, aggressive exhaust note that matches the Raptor's off-road character. The 3025-33306 is handcrafted from 3-inch, .065-inch-wall T304L stainless steel in Pennsylvania, USA, and terminates in 5-inch double-walled diamond black tips.\u003c\/p\u003e\n\u003cp\u003eThe AWE SwitchPath valve integrates directly with the factory OEM tier-1 valve motor, retaining full button and throttle-input valve control without any additional controller or wiring harness. Installation is bolt-on with no cutting, no welding, and no check engine light. The 3025-33306 is backed by AWE's perfect fitment guarantee, no CEL guarantee, and a lifetime warranty.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchPath Dual Soundtrack:\u003c\/strong\u003e The AWE 3025-33306 SwitchPath muffler provides two distinct sound profiles controlled by the factory OEM valve button and throttle input, giving the 2024+ Ranger Raptor a quiet highway mode and an aggressive open mode in a single system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3in T304L Stainless Steel Construction:\u003c\/strong\u003e Every section of the 3025-33306 is CNC mandrel-bent from 3-inch, .065-inch-wall U.S.-sourced T304L stainless steel for maximum durability, corrosion resistance, and flow efficiency over the Ranger Raptor's 3.0L EcoBoost V6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5in Double-Walled Diamond Black Tips:\u003c\/strong\u003e Slash-cut 5-inch double-walled tips in AWE's signature diamond black coating give the rear of the Raptor a bold, purposeful appearance while staying protected from corrosion and discoloration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Tier-1 Valve Integration:\u003c\/strong\u003e The 3025-33306 retains the factory Ranger Raptor valve motor and controls exactly as designed, with no aftermarket controller required. The exhaust-mounted valve motor simulator bracket keeps the ECU from logging valve faults\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo CEL Guarantee:\u003c\/strong\u003e AWE guarantees the 3025-33306 will not trigger a check engine light on the 2024+ Ranger Raptor when installed correctly per AWE instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect Fitment Guarantee:\u003c\/strong\u003e AWE guarantees the 3025-33306 will bolt directly onto the 2024+ Ranger Raptor without modification, cutting, or fitment adjustments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandcrafted in Pennsylvania, USA:\u003c\/strong\u003e Every AWE exhaust is manufactured domestically to tight tolerances with American-sourced stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e AWE backs the 3025-33306 with a limited lifetime warranty against defects in materials and workmanship for the original purchaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThis Part Fits\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e3025-33306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e850084616617\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Type\u003c\/td\u003e\n\u003ctd\u003eCat-Back (SwitchPath)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine\u003c\/td\u003e\n\u003ctd\u003e3.0L V6 EcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTubing Material\u003c\/td\u003e\n\u003ctd\u003eT304L Stainless Steel, U.S.-sourced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTubing Diameter\u003c\/td\u003e\n\u003ctd\u003e3 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Thickness\u003c\/td\u003e\n\u003ctd\u003e.065 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Size\u003c\/td\u003e\n\u003ctd\u003e5 inches, double-walled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Finish\u003c\/td\u003e\n\u003ctd\u003eDiamond Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve Type\u003c\/td\u003e\n\u003ctd\u003eOEM Tier-1 (factory control retained)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA (Pennsylvania)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmissions\u003c\/td\u003e\n\u003ctd\u003e50-state legal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eAWE Limited Lifetime Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProp 65\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAWE 3025-33306 SwitchPath cat-back exhaust system, complete\u003c\/li\u003e\n\u003cli\u003e5-inch double-walled diamond black tips with locking collars\u003c\/li\u003e\n\u003cli\u003eExhaust-mounted valve motor simulator bracket\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware and exhaust hangers\u003c\/li\u003e\n\u003cli\u003eAWE installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout AWE Tuning\u003c\/h4\u003e\n\u003cp\u003eAWE Tuning has been engineering exhaust systems and performance parts in Pennsylvania, USA since 1991. Every AWE exhaust is designed on the dyno, validated on the road and track, and handcrafted from U.S.-sourced stainless steel before leaving the factory floor. The SwitchPath system was developed specifically for factory-valved exhaust platforms to deliver a true dual-soundtrack experience without sacrificing OEM integration or reliability. AWE backs every exhaust with a perfect fitment guarantee, a no CEL guarantee, and a limited lifetime warranty.\u003c\/p\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the AWE 3025-33306?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AWE 3025-33306 is the SwitchPath Cat-Back Exhaust for the 2024+ Ford Ranger Raptor 3.0L EcoBoost V6, finished with 5-inch double-walled diamond black tips. It uses the factory OEM valve to deliver two driver-selectable exhaust tones, is handcrafted in Pennsylvania from T304L stainless steel, and installs without cutting or welding. It is backed by AWE's perfect fitment guarantee, no CEL guarantee, and a lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat years does the AWE 3025-33306 fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 3025-33306 fits the 2024 and newer Ford Ranger Raptor equipped with the 3.0L V6 EcoBoost engine. It does not fit the standard Ranger 2.3L, prior-generation Rangers, or Ranger Raptor models sold outside the USA with different engine configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the SwitchPath valve work on the Ranger Raptor?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AWE 3025-33306 integrates with the factory OEM tier-1 valve motor already installed on the Ranger Raptor. No external controller is needed. The factory button on the dash and factory throttle-input valve control operate the SwitchPath valve exactly as designed by Ford. AWE also includes a valve motor simulator bracket to prevent ECU valve-fault codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the AWE 3025-33306 trigger a check engine light?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. AWE guarantees the 3025-33306 will not cause a check engine light on the 2024+ Ford Ranger Raptor when installed correctly. The included valve motor simulator bracket keeps the ECU from detecting any valve-related fault.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the AWE 3025-33306 50-state legal?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The AWE 3025-33306 is 50-state emissions legal and does not require a CARB exemption number for use on the 2024+ Ford Ranger Raptor in California or any other state.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow is the AWE 3025-33306 installed? Does it require cutting or welding?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 3025-33306 is a direct bolt-on replacement for the factory exhaust behind the catalytic converter. Installation uses factory mounting locations and includes all hardware. No cutting, welding, or custom fabrication is required. AWE estimates installation time at approximately 60 to 90 minutes with basic hand tools and a lift or jack stands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tip finish options are available for this exhaust?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAWE offers the Ford Ranger Raptor 3.0L SwitchPath cat-back in two tip finishes: diamond black (part number 3025-33306) and chrome silver (part number 3025-32306). Both systems are otherwise identical in construction and performance. Only the tip finish differs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty on the AWE 3025-33306?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAWE covers the 3025-33306 with a limited lifetime warranty against defects in materials and workmanship for the original purchaser. Warranty claims are handled directly through AWE Tuning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the AWE 3025-33306 change exhaust sound at idle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWith the SwitchPath valve closed, the 3025-33306 is subtle at idle and refined at highway speeds. With the valve open, the Ranger Raptor's 3.0L produces a significantly deeper, more aggressive exhaust note at all RPMs. The valve can be toggled at any time using the factory button or through throttle input.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eRaise and safely support the vehicle on a lift or jack stands with the engine fully cooled before beginning\u003c\/li\u003e\n\u003cli\u003eDisconnect the factory exhaust valve actuator harness and set aside. Install the AWE valve motor simulator bracket in its place to prevent ECU valve fault codes\u003c\/li\u003e\n\u003cli\u003eLoosen and remove all factory exhaust hangers behind the catalytic converter outlet flange, working from rear to front\u003c\/li\u003e\n\u003cli\u003eRemove the factory cat-back exhaust system and set aside\u003c\/li\u003e\n\u003cli\u003eDry-fit the AWE 3025-33306 sections to confirm routing and hanger alignment before final assembly\u003c\/li\u003e\n\u003cli\u003eAttach the AWE exhaust sections starting at the front flange, working rearward. Torque the front flange bolts to the specification in the AWE instruction sheet\u003c\/li\u003e\n\u003cli\u003eHang all AWE-supplied exhaust hangers and confirm the system is evenly supported with no contact to the underbody or fuel\/brake lines\u003c\/li\u003e\n\u003cli\u003eSlide the locking collars over the tip connections and tighten to lock the 5-inch tips in the desired rotational position\u003c\/li\u003e\n\u003cli\u003eReconnect the factory OEM valve motor harness to the AWE SwitchPath muffler valve actuator\u003c\/li\u003e\n\u003cli\u003eLower the vehicle, start the engine, and verify valve operation using the factory dash button. Test both valve positions at idle and during a short test drive\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":46044534931535,"sku":"AWE3025-33306","price":2495.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/AWE_Switchpath_Cat-Back_2024_Ford_Ranger_Raptor.png?v=1783958006","url":"https:\/\/www.blackopsautoworks.com\/products\/awe-3025-33306-switchpath-cat-back-2024-ford-ranger-raptor","provider":"Black Ops Auto Works","version":"1.0","type":"link"}