{"product_id":"awe-tuning-2024-lexus-gx-550-0fg-performance-exhaust-system-bashguard-only","title":"AWE 0FG Cat-Back Exhaust for Lexus GX 550 with BashGuard","description":"\u003ch4\u003eEngineered Sound, Confirmed Configuration\u003c\/h4\u003e\u003cp\u003eAWE 3015-28550 is the exact configuration described below. Give the twin-turbo GX a deeper exhaust note while keeping highway cruising comfortable and the rear exit tucked up for trail clearance.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDual-phase 180 Technology targets two frequencies responsible for cabin drone.\u003c\/li\u003e\n\u003cli\u003eEqual-length front pipes and a straight-through layout shape the exhaust note.\u003c\/li\u003e\n\u003cli\u003e3-inch and 2.5-inch T304L stainless tubing with 0.065-inch wall thickness.\u003c\/li\u003e\n\u003cli\u003eHigh-clearance BashGuard exit terminates after the rear axle with a reinforced outlet ring.\u003c\/li\u003e\n\u003cli\u003eFront routing preserves skid-plate clearance; AWE tested compatibility with a Hellivue spare-mounted auxiliary tank.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2024–2026\u003c\/td\u003e\n\u003ctd\u003eLexus\u003c\/td\u003e\n\u003ctd\u003eGX550\u003c\/td\u003e\n\u003ctd\u003e3.4L twin-turbo V6; verify factory exhaust and clearance\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eSelect 3015-28550 only for the stated engine and configuration. Confirm the original exhaust connection and any aftermarket underbody accessories before installation.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003e3015-28550\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAWE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eComplete cat-back with BashGuard exit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTubing\u003c\/td\u003e\n\u003ctd\u003e3 in and 2.5 in T304L stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e0.065 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip configuration\u003c\/td\u003e\n\u003ctd\u003eBashGuard outlet; no decorative rear bumper tips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cp\u003eThe 3015-28550 package contains:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo front pipes, mid resonator section, over-axle pipe and rear resonator\/BashGuard section.\u003c\/li\u003e\n\u003cli\u003eOne 2.5-inch and three 3-inch band clamps.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout AWE\u003c\/h4\u003e\u003cp\u003eAWE designs and manufactures performance exhaust systems in Pennsylvania, with vehicle-specific routing and sound-control engineering.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cp\u003e\u003ca href=\"\/products\/baer-spray-brake-cleaner-non-chlorinated-technical-grade-130z-12-case-aerosol\"\u003eBaer non-chlorinated brake-cleaner case\u003c\/a\u003e — a separate workshop supply for label-approved external metal components. Follow the cleaner label and keep it away from hot surfaces and finished exhaust tips.\u003c\/p\u003e\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\u003cstrong\u003eWhat is the 3015-28550?\u003c\/strong\u003e\u003cp\u003eIt is the AWE 0FG cat-back exhaust configuration specified in the table above.\u003c\/p\u003e\u003cstrong\u003eIs this just a BashGuard accessory?\u003c\/strong\u003e\u003cp\u003eNo. This SKU is the complete cat-back system, with the high-clearance BashGuard as its exit configuration.\u003c\/p\u003e\u003cstrong\u003eWhat controls the cruising sound?\u003c\/strong\u003e\u003cp\u003eAWE 180 Technology uses tuned chambers to reduce unwanted cabin frequencies.\u003c\/p\u003e\u003cstrong\u003eWhat material is used?\u003c\/strong\u003e\u003cp\u003eThe system is manufactured from T304L stainless steel.\u003c\/p\u003e\u003cstrong\u003eWhich tip finish is included?\u003c\/strong\u003e\u003cp\u003eThis configuration uses a high-clearance BashGuard outlet rather than decorative bumper tips.\u003c\/p\u003e\u003cstrong\u003eDoes it replace emissions-control hardware?\u003c\/strong\u003e\u003cp\u003eAWE describes this as a cat-back system that leaves factory emissions-control equipment in place.\u003c\/p\u003e\u003cstrong\u003eIs a tune required?\u003c\/strong\u003e\u003cp\u003eAWE lists this configuration as requiring no ECU tune when installed as intended.\u003c\/p\u003e\u003cstrong\u003eWhat should be checked before ordering?\u003c\/strong\u003e\u003cp\u003eConfirm the vehicle, engine, configuration and existing modifications, then review the exact installation manual.\u003c\/p\u003e\u003ch4\u003eInstallation\u003c\/h4\u003e\u003cp\u003eReview the manufacturer instructions for 3015-28550 before starting. No cutting of the replacement system is required. The manual reuses the original front flange hardware and rubber hangers.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/installation_instructions_awe_GX550_Rev1.1_2026.pdf\" target=\"_blank\" rel=\"noopener\"\u003eExact manufacturer installation manual\u003c\/a\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eAllow the exhaust to cool fully and support the vehicle securely.\u003c\/li\u003e\n\u003cli\u003eInventory the supplied sections and hardware before removing the original exhaust.\u003c\/li\u003e\n\u003cli\u003eFollow the exact manual for removal, reused hardware and staged pipe assembly.\u003c\/li\u003e\n\u003cli\u003eAlign the outlet or tips and check clearance to the body, suspension and other components.\u003c\/li\u003e\n\u003cli\u003eTighten all clamps and fasteners to the manual specifications, then check for leaks and contact.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch4\u003eCalifornia Proposition 65 Information\u003c\/h4\u003e\u003cp\u003eWARNING: AWE products in their physical form as sold do not present a chemical exposure hazard. However, operations including, but not limited to welding, brazing, or thermal cutting can expose you to chemicals including Chromium, Nickel, Cobalt, Arsenic, Cadmium, and Lead which are known to the State Of California to cause cancer, birth defects, or other reproductive harm. Likewise, operating, servicing, and maintaining an automobile can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust fumes, service your vehicle in a well-ventilated area, and wear gloves or wash your hands frequently when servicing your vehicle.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.awe-tuning.com\/pages\/prop65\" target=\"_blank\" rel=\"noopener\"\u003eAWE Proposition 65 information\u003c\/a\u003e\u003c\/p\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":67723050385487,"sku":"AWE3015-28550","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/awe-3015-28550-hero.webp?v=1792176275","url":"https:\/\/www.blackopsautoworks.com\/products\/awe-tuning-2024-lexus-gx-550-0fg-performance-exhaust-system-bashguard-only","provider":"Black Ops Auto Works","version":"1.0","type":"link"}