{"product_id":"baer-brakes-claw-performance-front-brake-rotors-for-2005-2020-select-chevrolet-gmc-and-cadillac-applications","title":"Baer Brakes Claw Performance Front Brake Rotors for 2005-2020 Select Chevrolet, GMC \u0026 Cadillac Applications","description":"\u003ch4\u003eDirect Replacement Rotors With a Real Upgrade in Feel\u003c\/h4\u003e\n\u003cp\u003eBaer Claw performance rotors are a direct replacement upgrade for the factory rotors. Each pair is cross drilled and slotted so the gas and dust that build up between pad and rotor have an escape route, which keeps pedal feel consistent and reduces brake fade, and each rotor is zinc plated for a clean look behind open centre wheels. This listing is Baer part number 55097-020 for Chevrolet, GMC \u0026amp; Cadillac.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair of direct replacement performance rotors for one axle\u003c\/li\u003e\n\u003cli\u003eCross drilled and slotted friction surface vents gas and dust from between the pad and rotor\u003c\/li\u003e\n\u003cli\u003eMore consistent pedal feel and reduced brake fade compared with the plain factory rotor\u003c\/li\u003e\n\u003cli\u003eZinc plated finish resists surface rust and looks clean behind open centre wheels\u003c\/li\u003e\n\u003cli\u003eUses the factory calipers, brackets, pads and hardware, so no relocation brackets are needed\u003c\/li\u003e\n\u003cli\u003eCast and finished by Baer Brakes in the United States\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet, GMC \u0026amp; Cadillac\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003ctd\u003eSelect applications only, confirm against part number 55097-020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSold as a pair for the front axle only.\u003c\/p\u003e\n\u003cp\u003eThis listing covers Baer part number 55097-020. Vehicles outside the years, engines and drivetrains listed above use a different Baer part number.\u003c\/p\u003e\n\u003cp\u003eThis part number covers a group of applications rather than a single vehicle. Send us your year, make, model, engine and drivetrain and we will confirm the application before shipping.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct line\u003c\/td\u003e\n\u003ctd\u003eBaer Claw Performance rotors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor type\u003c\/td\u003e\n\u003ctd\u003eOne piece, cross drilled and slotted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eZinc plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003ePair, one axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eDirect replacement using factory calipers and brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake position\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003e55097-020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBaer Brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Baer Claw performance brake rotors for the axle listed above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Baer Brakes\u003c\/h4\u003e\n\u003cp\u003eBaer Brakes has engineered and built high performance brake systems in Phoenix, Arizona since 1994. The company designs its own calipers, casts its own rotors and assembles complete systems in house, which is why Baer hardware is a common choice for muscle cars, trucks and modern performance vehicles that need more brake than the factory supplied.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is 55097-020?\u003c\/strong\u003e\n\u003cp\u003e55097-020 is the Baer Brakes part number for this brake rotor set. Ordering by that number is the only way to be certain you are getting this exact item, because listings that only describe the product can cover several different part numbers.\u003c\/p\u003e\n\u003cstrong\u003eDo I need new pads with these rotors?\u003c\/strong\u003e\n\u003cp\u003eNew pads are strongly recommended. Bedding fresh pads to fresh rotors gives the most even transfer layer, and used pads carry the wear pattern of the old rotor.\u003c\/p\u003e\n\u003cstrong\u003eDo drilled and slotted rotors crack?\u003c\/strong\u003e\n\u003cp\u003eBaer casts and machines these rotors for street and performance street use, and the drilling is chamfered to control stress at the hole edges. Sustained competition use is better served by a slot only rotor, which Baer supplies separately.\u003c\/p\u003e\n\u003cstrong\u003eWill these fit behind my factory wheels?\u003c\/strong\u003e\n\u003cp\u003eYes. Claw rotors are the same diameter as the factory rotor for the listed application, so wheel clearance does not change.\u003c\/p\u003e\n\u003cstrong\u003eIs this sold as one rotor or a pair?\u003c\/strong\u003e\n\u003cp\u003ePart number 55097-020 is a pair of rotors for one axle. If you are refreshing both ends of the car you need the matching front and rear part numbers.\u003c\/p\u003e\n\u003cstrong\u003eCan I use my existing pads?\u003c\/strong\u003e\n\u003cp\u003eYou can, but fresh pads bed to a fresh rotor far better. Reusing pads that were worn against the old rotor leaves an uneven contact pattern and can cause noise or vibration.\u003c\/p\u003e\n\u003cstrong\u003eIs this the genuine Baer Brakes part or a copy?\u003c\/strong\u003e\n\u003cp\u003eThis is genuine Baer Brakes product sold new in the manufacturer packaging under part number 55097-020. It is not a reproduction or a superseded number.\u003c\/p\u003e\n\u003cstrong\u003eDoes this part come with a warranty?\u003c\/strong\u003e\n\u003cp\u003eWarranty is handled under the Baer Brakes consumer warranty that applies to part number 55097-020 at the time of purchase. Keep your order confirmation, because warranty claims are processed against the original purchase record.\u003c\/p\u003e\n\u003cstrong\u003eWill you confirm fitment before it ships?\u003c\/strong\u003e\n\u003cp\u003eSend us the year, make, model, engine and drivetrain of the vehicle along with part number 55097-020 and we will check the application against the manufacturer data before the order goes out.\u003c\/p\u003e\n\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\n\u003cp\u003eOrders normally leave the warehouse within one to three business days once the order is verified. If part number 55097-020 is on factory backorder we will tell you before charging the order.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003ePark the vehicle on level ground, chock the wheels that stay on the ground and loosen the lug nuts on the axle you are working on before lifting.\u003c\/li\u003e\n\u003cli\u003eRaise the vehicle with a jack, support it on rated jack stands and remove the road wheels.\u003c\/li\u003e\n\u003cli\u003eUnbolt the brake caliper from its bracket, support the caliper so the hose is not loaded, and hang it out of the way.\u003c\/li\u003e\n\u003cli\u003eRemove the caliper bracket where required, then pull the factory rotor off the hub. Retaining clips or screws must come out first on some applications.\u003c\/li\u003e\n\u003cli\u003eClean the hub face completely so the new rotor sits flat. Any rust or debris left behind will show up as runout and pedal pulsation.\u003c\/li\u003e\n\u003cli\u003eWash the preservative coating off the new rotor friction surfaces with brake cleaner and fit the rotor to the hub.\u003c\/li\u003e\n\u003cli\u003eReinstall the caliper bracket and caliper with the correct fasteners, torquing everything to the vehicle service manual figures.\u003c\/li\u003e\n\u003cli\u003eFit new or clean pads, refit the wheels and torque the lug nuts to specification in a star pattern.\u003c\/li\u003e\n\u003cli\u003ePump the brake pedal until it is firm before moving the vehicle, then bed the pads and rotors in with a series of moderate stops from moderate speed, avoiding a full stop while hot.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eProp 65 Warning\u003c\/h4\u003e\n\u003cp\u003eWARNING: California residents. Cancer and reproductive harm. www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Baer Brakes","offers":[{"title":"Default Title","offer_id":46504228126799,"sku":"BAE55097-020","price":237.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/baer-55097-020-claw-performance-detail-3-7.jpg?v=1787866621","url":"https:\/\/www.blackopsautoworks.com\/products\/baer-brakes-claw-performance-front-brake-rotors-for-2005-2020-select-chevrolet-gmc-and-cadillac-applications","provider":"Black Ops Auto Works","version":"1.0","type":"link"}