{"product_id":"baer-brakes-eradispeed-plus-rear-brake-rotors-for-2020-2025-chevy-corvette-z51","title":"Baer Brakes EradiSpeed+ Rear Brake Rotors for 2020-2025 Chevy Corvette Z51","description":"\u003ch4\u003eTwo Piece Rotors That Cut Weight and Heat\u003c\/h4\u003e\n\u003cp\u003eThe Baer EradiSpeed+ upgrade is a two piece rotor built from a premium purpose cast iron ring mounted to a black anodized 6061-T6 aluminium hat with NAS aircraft grade hardware. The casting carries extra mass in the friction area and uses a curved vane design that moves more air and sheds heat faster than the factory rotor, while the slotted and drilled surface vents dust and gas for a more consistent pedal. This listing is Baer part number 2302076 for Chevy Corvette Z51.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo piece design with a purpose cast iron ring on a black anodized 6061-T6 aluminium hat\u003c\/li\u003e\n\u003cli\u003eAssembled with NAS aircraft grade hardware\u003c\/li\u003e\n\u003cli\u003eCurved internal vane design promotes airflow and faster heat dissipation\u003c\/li\u003e\n\u003cli\u003eIncreased mass in the friction area compared with the factory rotor\u003c\/li\u003e\n\u003cli\u003eSlotted and drilled friction surface vents dust and gas for consistent pedal feel\u003c\/li\u003e\n\u003cli\u003eZinc plated to resist rust and corrosion\u003c\/li\u003e\n\u003cli\u003eDirect bolt on system that does not require brake bleeding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020-2025\u003c\/td\u003e\n\u003ctd\u003eChevy Corvette Z51\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003ctd\u003eConfirm against the part number before ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSold as a pair for the rear axle only.\u003c\/p\u003e\n\u003cp\u003eThis listing covers Baer part number 2302076. Vehicles outside the years, engines and drivetrains listed above use a different Baer part number.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct line\u003c\/td\u003e\n\u003ctd\u003eBaer EradiSpeed+ two piece rotors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor construction\u003c\/td\u003e\n\u003ctd\u003eTwo piece, cast iron ring on 6061-T6 aluminium hat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHat finish\u003c\/td\u003e\n\u003ctd\u003eBlack anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eNAS aircraft grade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFriction surface\u003c\/td\u003e\n\u003ctd\u003eSlotted, drilled and zinc plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003ePair, one axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eDirect bolt on, no brake bleeding required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake position\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003e2302076\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBaer Brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo Baer EradiSpeed+ two piece performance rotors for the axle listed above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Baer Brakes\u003c\/h4\u003e\n\u003cp\u003eBaer Brakes has engineered and built high performance brake systems in Phoenix, Arizona since 1994. The company designs its own calipers, casts its own rotors and assembles complete systems in house, which is why Baer hardware is a common choice for muscle cars, trucks and modern performance vehicles that need more brake than the factory supplied.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is 2302076?\u003c\/strong\u003e\n\u003cp\u003e2302076 is the Baer Brakes part number for this brake rotor set. Ordering by that number is the only way to be certain you are getting this exact item, because listings that only describe the product can cover several different part numbers.\u003c\/p\u003e\n\u003cstrong\u003eWhat is the advantage of a two piece rotor?\u003c\/strong\u003e\n\u003cp\u003eSeparating the iron friction ring from an aluminium hat drops rotating weight and lets the ring grow and shrink with heat without dragging the hat with it, which helps keep the surface flat under hard use.\u003c\/p\u003e\n\u003cstrong\u003eDo I need to bleed the brakes?\u003c\/strong\u003e\n\u003cp\u003eNo. The EradiSpeed+ is a direct bolt on rotor swap and the hydraulic system is not opened.\u003c\/p\u003e\n\u003cstrong\u003eShould I run these on a dedicated track car?\u003c\/strong\u003e\n\u003cp\u003eBaer recommends and supplies a slot only version for autocross and track day use. The drilled and slotted version sold here is aimed at street and performance street driving.\u003c\/p\u003e\n\u003cstrong\u003eIs this sold as one rotor or a pair?\u003c\/strong\u003e\n\u003cp\u003ePart number 2302076 is a pair of rotors for one axle. If you are refreshing both ends of the car you need the matching front and rear part numbers.\u003c\/p\u003e\n\u003cstrong\u003eCan I use my existing pads?\u003c\/strong\u003e\n\u003cp\u003eYou can, but fresh pads bed to a fresh rotor far better. Reusing pads that were worn against the old rotor leaves an uneven contact pattern and can cause noise or vibration.\u003c\/p\u003e\n\u003cstrong\u003eIs this the genuine Baer Brakes part or a copy?\u003c\/strong\u003e\n\u003cp\u003eThis is genuine Baer Brakes product sold new in the manufacturer packaging under part number 2302076. It is not a reproduction or a superseded number.\u003c\/p\u003e\n\u003cstrong\u003eDoes this part come with a warranty?\u003c\/strong\u003e\n\u003cp\u003eWarranty is handled under the Baer Brakes consumer warranty that applies to part number 2302076 at the time of purchase. Keep your order confirmation, because warranty claims are processed against the original purchase record.\u003c\/p\u003e\n\u003cstrong\u003eWill you confirm fitment before it ships?\u003c\/strong\u003e\n\u003cp\u003eSend us the year, make, model, engine and drivetrain of the vehicle along with part number 2302076 and we will check the application against the manufacturer data before the order goes out.\u003c\/p\u003e\n\u003cstrong\u003eHow quickly does this ship?\u003c\/strong\u003e\n\u003cp\u003eOrders normally leave the warehouse within one to three business days once the order is verified. If part number 2302076 is on factory backorder we will tell you before charging the order.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003ePark the vehicle on level ground, chock the wheels that stay on the ground and loosen the lug nuts on the axle you are working on before lifting.\u003c\/li\u003e\n\u003cli\u003eRaise the vehicle with a jack, support it on rated jack stands and remove the road wheels.\u003c\/li\u003e\n\u003cli\u003eUnbolt the brake caliper from its bracket, support the caliper so the hose is not loaded, and hang it out of the way.\u003c\/li\u003e\n\u003cli\u003eRemove the caliper bracket where required, then pull the factory rotor off the hub. Retaining clips or screws must come out first on some applications.\u003c\/li\u003e\n\u003cli\u003eClean the hub face completely so the new rotor sits flat. Any rust or debris left behind will show up as runout and pedal pulsation.\u003c\/li\u003e\n\u003cli\u003eWash the preservative coating off the new rotor friction surfaces with brake cleaner and fit the rotor to the hub.\u003c\/li\u003e\n\u003cli\u003eReinstall the caliper bracket and caliper with the correct fasteners, torquing everything to the vehicle service manual figures.\u003c\/li\u003e\n\u003cli\u003eFit new or clean pads, refit the wheels and torque the lug nuts to specification in a star pattern.\u003c\/li\u003e\n\u003cli\u003ePump the brake pedal until it is firm before moving the vehicle, then bed the pads and rotors in with a series of moderate stops from moderate speed, avoiding a full stop while hot.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003eProp 65 Warning\u003c\/h4\u003e\n\u003cp\u003eWARNING: California residents. Cancer and reproductive harm. www.P65Warnings.ca.gov\u003c\/p\u003e\n","brand":"Baer Brakes","offers":[{"title":"Default Title","offer_id":46504226291791,"sku":"BAE2302076","price":868.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/baer-2302076-eradispeed-plus-main-1.jpg?v=1787865701","url":"https:\/\/www.blackopsautoworks.com\/products\/baer-brakes-eradispeed-plus-rear-brake-rotors-for-2020-2025-chevy-corvette-z51","provider":"Black Ops Auto Works","version":"1.0","type":"link"}