{"product_id":"baja-designs-448064-ford-raptor-onx6-10in-amber-behind-grill-kit","title":"Baja Designs 2021+ Ford Raptor OnX6 Behind Grill Kit -10in. Amber D\/C","description":"\u003ch4\u003eDual 10-Inch Baja Amber OnX6 Light Bars Purpose-Built for the 2021 and Newer Ford F-150 Raptor Grille Opening\u003c\/h4\u003e\n\n\u003cp\u003eThe Baja Designs 448064 is a complete behind-grille lighting kit for the 2021 to 2025 Ford F-150 Raptor. The kit includes two 10-inch OnX6 LED light bars in Baja Amber with a Driving\/Combo beam pattern, purpose-built mounting brackets that attach to the factory grille shutter mounting points, a splitter wiring harness, and an up-fitter harness that connects to the Raptor factory auxiliary switches without cutting any wires. The entire kit is designed to integrate cleanly behind the grille for a factory appearance with significant off-road lighting output.\u003c\/p\u003e\n\n\u003cp\u003eEach OnX6 10-inch bar in the 448064 produces 10,817 raw lumens on high and 9,230 on low, drawing 106.26 watts at 7.7 amps. The Driving\/Combo beam pattern combines a 9-degree spot lens with a 42-degree wide lens in a single bar, delivering usable light close and far simultaneously. The Baja Amber lens color improves contrast in dusty, foggy, and smoky conditions compared to clear output. The bars are built with aircraft-grade aluminum housing, mil-spec hard anodize, billet machined aluminum bezels, and stainless steel hardware throughout. IP69K waterproof and IK10 impact rated. Baja Designs backs the 448064 with a Limited Lifetime Warranty and a 30-Day Satisfaction Guarantee.\u003c\/p\u003e\n\n\u003ch4\u003e448064 Key Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 10-inch OnX6 LED light bars in Baja Amber \/ Driving Combo configuration\u003c\/li\u003e\n  \u003cli\u003e10,817 lumens per bar on high, 9,230 on low\u003c\/li\u003e\n  \u003cli\u003e106.26W \/ 7.7A per bar at 13.8V\u003c\/li\u003e\n  \u003cli\u003eDriving\/Combo beam: 9-degree spot plus 42-degree wide lens in one bar\u003c\/li\u003e\n  \u003cli\u003eBrackets mount to factory grille shutter points on the 2021 to 2025 F-150 Raptor\u003c\/li\u003e\n  \u003cli\u003eUp-fitter harness connects directly to factory Raptor auxiliary switches\u003c\/li\u003e\n  \u003cli\u003eAircraft-grade aluminum housing with Mil-Spec hard anodize\u003c\/li\u003e\n  \u003cli\u003eBillet machined aluminum bezels and stainless steel hardware\u003c\/li\u003e\n  \u003cli\u003eIP69K waterproof to 9 feet and pressure-wash safe\u003c\/li\u003e\n  \u003cli\u003eIK10 compliant for mechanical impact resistance\u003c\/li\u003e\n  \u003cli\u003eExceeds MIL-STD810G Mil-Spec testing\u003c\/li\u003e\n  \u003cli\u003eLED life rated at 49,930 hours\u003c\/li\u003e\n  \u003cli\u003e5000K daylight color temperature on high and low beams\u003c\/li\u003e\n  \u003cli\u003eLimited Lifetime Warranty and 30-Day Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePart Number (MPN)\u003c\/td\u003e\n\u003ctd\u003e448064\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBaja Designs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eOnX6 10-Inch LED Light Bar\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLight Bar Size\u003c\/td\u003e\n\u003ctd\u003e10 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 light bars (pair)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLumens per Bar (High)\u003c\/td\u003e\n\u003ctd\u003e10,817\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLumens per Bar (Low)\u003c\/td\u003e\n\u003ctd\u003e9,230\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWattage per Bar (High)\u003c\/td\u003e\n\u003ctd\u003e106.26W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAmperage per Bar (High)\u003c\/td\u003e\n\u003ctd\u003e7.7A at 13.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBeam Pattern\u003c\/td\u003e\n\u003ctd\u003eDriving\/Combo (9-degree Spot plus 42-degree Wide)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLens Color\u003c\/td\u003e\n\u003ctd\u003eBaja Amber\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLens Material\u003c\/td\u003e\n\u003ctd\u003eHard-Coated Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eColor Temperature\u003c\/td\u003e\n\u003ctd\u003e5000K Daylight\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBar Dimensions\u003c\/td\u003e\n\u003ctd\u003e10 in. x 4.29 in. x 2.69 in. (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBar Weight\u003c\/td\u003e\n\u003ctd\u003e4.25 lbs. each\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eAircraft-Grade Aluminum with Mil-Spec Hard Anodize\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBezel Material\u003c\/td\u003e\n\u003ctd\u003eBillet Machined Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHardware Material\u003c\/td\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperational Voltage\u003c\/td\u003e\n\u003ctd\u003e9-32V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP69K (waterproof to 9ft, pressure-wash safe)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eImpact Rating\u003c\/td\u003e\n\u003ctd\u003eIK10 Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMil-Spec\u003c\/td\u003e\n\u003ctd\u003eExceeds MIL-STD810G\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLED Life\u003c\/td\u003e\n\u003ctd\u003e49,930 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOvervoltage Protection\u003c\/td\u003e\n\u003ctd\u003eBuilt-in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime Warranty \/ 30-Day Satisfaction Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eVerify with supplier\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x Baja Designs 10-inch OnX6 LED Light Bars (Baja Amber \/ Driving Combo)\u003c\/li\u003e\n  \u003cli\u003e2 x Behind-grille mounting brackets for 2021 to 2025 Ford F-150 Raptor\u003c\/li\u003e\n  \u003cli\u003e1 x Splitter wiring harness\u003c\/li\u003e\n  \u003cli\u003e1 x Up-fitter wiring harness (connects to factory Raptor auxiliary switches)\u003c\/li\u003e\n  \u003cli\u003eAll necessary mounting hardware (stainless steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: This kit will not work with adaptive cruise control relocation kits.\u003c\/p\u003e\n\n\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e2024\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003e2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes the Baja Designs 448064 fit the 2024 and 2025 Ford F-150 Raptor?\u003c\/strong\u003e\u003cbr\u003e\nYes. The 448064 is compatible with 2021 through 2025 Ford F-150 Raptor models. The brackets attach to the factory grille shutter mounting points that are consistent across the Gen 3 Raptor production run. Note: this kit does not work with adaptive cruise control relocation kits.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 448064 amber kit and the clear version?\u003c\/strong\u003e\u003cbr\u003e\nThe 448064 uses Baja Amber lenses on both OnX6 bars. The amber lens converts the output to a warmer amber wavelength that cuts through dust, fog, and rain with less reflected glare. The clear version (448063) produces the same lumen output in white 5000K daylight. Both kits use identical brackets, hardware, and harness components.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow does the 448064 harness connect to the Ford Raptor?\u003c\/strong\u003e\u003cbr\u003e\nThe included up-fitter harness is designed to plug into the factory Raptor auxiliary switch wiring located behind the battery. No permanent wiring modification is needed. The factory auxiliary switches provide switched power with built-in fusing. Baja Designs recommends using upfitter switch 1, 2, or 3 and avoiding switch 4 and the purple wire, which are limited to 10 amps.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat beam pattern does the 448064 produce?\u003c\/strong\u003e\u003cbr\u003e\nThe 448064 uses the Driving\/Combo pattern, which combines a 9-degree spot lens for long-distance illumination with a 42-degree wide lens for near-field coverage in a single light bar. This provides a smooth blend of light at various distances without needing two separate beam patterns.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow bright is the Baja Designs 448064 kit total?\u003c\/strong\u003e\u003cbr\u003e\nThe two bars in the 448064 produce a combined 21,634 raw lumens on high. Each 10-inch OnX6 bar produces 10,817 lumens on high at 106.26 watts. This makes the 448064 one of the highest-output behind-grille kits available for the Gen 3 Raptor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the 448064 waterproof?\u003c\/strong\u003e\u003cbr\u003e\nYes. Each OnX6 bar carries an IP69K rating, which means it is waterproof to 9 feet of submersion and is pressure-wash safe. The bars also meet IK10 mechanical impact resistance standards and exceed MIL-STD810G Mil-Spec testing for vibration and temperature extremes.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat warranty does the Baja Designs 448064 carry?\u003c\/strong\u003e\u003cbr\u003e\nBaja Designs backs the 448064 with a Limited Lifetime Warranty against defects in materials and workmanship for the original purchaser, plus a 30-Day Satisfaction Guarantee. The Magnuson-Moss Warranty Act protects your right to use aftermarket lighting without voiding unrelated vehicle warranties.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill the 448064 work if my Raptor has the adaptive cruise control relocation kit?\u003c\/strong\u003e\u003cbr\u003e\nNo. Baja Designs notes that this kit will not work with adaptive cruise control relocation kits. If your Raptor has a ACC relocation kit installed, check with Baja Designs for compatible alternatives before purchasing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow long does it take to install the Baja Designs 448064 on a Ford Raptor?\u003c\/strong\u003e\u003cbr\u003e\nWith basic hand tools, most experienced installers complete the 448064 in two to three hours. The grille must be removed, the lower shutter slats on both sides are removed, brackets are mounted to the factory shutter mounting points, bars are positioned and aligned, and the harness is run to the up-fitter switch wiring behind the battery. The grille is reinstalled last.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003cp\u003eRemove the factory grille by removing the two lower 10mm mounting bolts and the upper mounting fasteners and pulling outward to release the clips. Remove the lower four shutter slats on both sides using a flat screwdriver to pry the retaining clips. Mount the supplied Baja Designs brackets to the factory shutter mounting points using the included stainless hardware. Position and snug the OnX6 bars onto the universal brackets using the supplied bar mounts. Reinstall the grille and route the bar harness connectors through the opening. Connect the bar connectors to the splitter harness. Run the up-fitter harness from the splitter to the auxiliary switch wiring behind the battery, connecting positive to your chosen factory switch wire and negative to chassis ground using the supplied ring terminal. Do not use upfitter switch 4, the brown wire, or the purple wire as they are rated at only 10 amps. Test the lights before finalizing harness routing. Aim the bars toward the intended lighting zone and re-tighten all pivot hardware.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Does the Baja Designs 448064 fit the 2024 and 2025 Ford F-150 Raptor?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The 448064 fits 2021 through 2025 Ford F-150 Raptor models. Brackets attach to factory grille shutter mounting points. Not compatible with adaptive cruise control relocation kits.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between the 448064 amber kit and the clear version?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The 448064 uses Baja Amber lenses for cutting through dust, fog, and rain. The clear version (448063) outputs white 5000K daylight. All brackets and harness components are identical.\"}},{\"@type\":\"Question\",\"name\":\"How does the 448064 harness connect to the Ford Raptor?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The included up-fitter harness plugs into factory Raptor auxiliary switch wiring behind the battery. No permanent wiring modification needed. Use switches 1, 2, or 3 only.\"}},{\"@type\":\"Question\",\"name\":\"What beam pattern does the 448064 produce?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The 448064 uses a Driving\/Combo pattern combining a 9-degree spot and 42-degree wide lens in each bar for near and far coverage simultaneously.\"}},{\"@type\":\"Question\",\"name\":\"How bright is the Baja Designs 448064 kit total?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The two bars produce a combined 21,634 raw lumens on high. Each bar outputs 10,817 lumens at 106.26 watts.\"}},{\"@type\":\"Question\",\"name\":\"Is the 448064 waterproof?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. IP69K rated waterproof to 9 feet and pressure-wash safe. Also meets IK10 impact resistance and exceeds MIL-STD810G Mil-Spec testing.\"}},{\"@type\":\"Question\",\"name\":\"What warranty does the Baja Designs 448064 carry?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Limited Lifetime Warranty plus 30-Day Satisfaction Guarantee from Baja Designs.\"}},{\"@type\":\"Question\",\"name\":\"Will the 448064 work if my Raptor has the adaptive cruise control relocation kit?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. This kit does not work with adaptive cruise control relocation kits. Contact Baja Designs for compatible alternatives.\"}},{\"@type\":\"Question\",\"name\":\"How long does it take to install the Baja Designs 448064 on a Ford Raptor?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Most experienced installers complete the 448064 in two to three hours using basic hand tools.\"}}]}\n\u003c\/script\u003e","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":45971984842831,"sku":"BAJ448064","price":1194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/baja-designs-2021-ford-raptor-onx6-behind-grill-kit-10in_-amber-dc-baja-designs.jpg?v=1782491297","url":"https:\/\/www.blackopsautoworks.com\/products\/baja-designs-448064-ford-raptor-onx6-10in-amber-behind-grill-kit","provider":"Black Ops Auto Works","version":"1.0","type":"link"}