{"product_id":"baja-designs-660119-s1-headlight-lens-kit-clear-work-scene-beam","title":"Baja Designs 660119 S1 Headlight Lens Kit Clear Work Scene Beam","description":"\u003cp\u003eThe Baja Designs \u003cstrong\u003e660119\u003c\/strong\u003e S1 Headlight Lens Kit gives you a clear, Work\/Scene beam pattern lens for your existing S1 auxiliary light pod. Built from hardcoated polycarbonate, this replacement and conversion lens installs directly onto any compatible S1 pod without tools and without voiding the host light warranty. Whether you are switching from a focused spot to a wide flood for close-range illumination or simply replacing a worn lens, the \u003cstrong\u003e660119\u003c\/strong\u003e kit includes everything you need to complete the swap. The S1 light pod is sold separately.\u003c\/p\u003e\n\n\u003ch4\u003eWork\/Scene Beam Pattern\u003c\/h4\u003e\n\n\u003cp\u003eThe Work\/Scene beam pattern casts a wide, short-throw flood of light that covers a broad horizontal area close to the vehicle. It is optimized for low-speed work environments, job sites, camp setups, and any situation where you need to see everything around you rather than far down the road.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWork\/Scene (this lens):\u003c\/strong\u003e Wide horizontal spread, short throw, maximum near-field coverage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpot:\u003c\/strong\u003e Tight, long-distance beam for high-speed trail or road use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDriving:\u003c\/strong\u003e Broader than spot but more focused than Work\/Scene, suited for moderate-speed driving use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eChoosing the right beam pattern depends on your primary use case. Work\/Scene is the go-to choice for anyone who needs wide, close-range lighting rather than distance projection.\u003c\/p\u003e\n\n\u003ch4\u003eS1 Lens Swap System\u003c\/h4\u003e\n\n\u003cp\u003eBaja Designs engineered the S1 pod with a user-swappable lens system. The lens is retained by the pod housing and sealed with the included O-ring, and no special tools are required to complete the exchange. Because the lens is a standalone accessory, swapping it does not affect the host light warranty. This means you can adapt your S1 pod to different tasks by keeping multiple lens kits on hand and switching them as your needs change.\u003c\/p\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Clear Work\/Scene lens (hardcoated polycarbonate)\u003c\/li\u003e\n  \u003cli\u003e1 x O-ring (replacement seal)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eS1 light pod not included. Sold individually as one lens kit.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch4\u003eFull Specifications\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePart Number (MPN)\u003c\/td\u003e\n\u003ctd\u003e660119\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e810032000000\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCompatible Light\u003c\/td\u003e\n\u003ctd\u003eBaja Designs S1 series auxiliary light pods\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLens Material\u003c\/td\u003e\n\u003ctd\u003eHardcoated polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLens Color\u003c\/td\u003e\n\u003ctd\u003eClear\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBeam Pattern\u003c\/td\u003e\n\u003ctd\u003eWork\/Scene (wide flood, close-range)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003e1 lens kit (1 lens plus 1 O-ring)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime (lens swap does not void host light warranty)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBaja Designs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eAbout Baja Designs\u003c\/h4\u003e\n\n\u003cp\u003eBaja Designs is an American lighting manufacturer founded by off-road racers who needed lighting that could survive the rigors of desert racing. Every product is engineered and tested in real-world race and recreational conditions. The company is known for its focus on optical performance, thermal management, and durability across its full lineup of auxiliary lights, light bars, and accessories.\u003c\/p\u003e\n\n\u003ch4\u003eProposition 65 Warning\u003c\/h4\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including those known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the S1 light pod?\u003c\/strong\u003e\u003cbr\u003eThe S1 is a compact auxiliary light pod in the Baja Designs lineup, designed for tight mounting locations where a larger light bar or round pod would not fit. It accepts interchangeable lenses, including this 660119 Work\/Scene kit, allowing the beam pattern to be changed without replacing the entire unit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between Work\/Scene, Spot, and Driving beam patterns?\u003c\/strong\u003e\u003cbr\u003eWork\/Scene produces a wide, short-throw flood ideal for close-range tasks. Spot concentrates light into a narrow, long-distance beam suited for high-speed trail use. Driving falls between the two, offering moderate spread and throw for general forward illumination at varying speeds.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the S1 light pod included with part number 660119?\u003c\/strong\u003e\u003cbr\u003eNo. Part 660119 is a lens kit only. The S1 light pod is sold separately. This kit is intended for customers who already own an S1 pod and want to change or replace its lens.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat does the O-ring do?\u003c\/strong\u003e\u003cbr\u003eThe O-ring creates a weatherproof seal between the lens and the S1 pod housing. Including a fresh O-ring with the lens ensures the seal integrity is maintained after every swap.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I swap back to my original lens after installing the Work\/Scene lens?\u003c\/strong\u003e\u003cbr\u003eYes. The lens swap system is designed to be reversible. As long as you retain your original lens and O-ring, you can reinstall it at any time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs part 660119 compatible with other Baja Designs light models?\u003c\/strong\u003e\u003cbr\u003eNo. This lens is designed specifically for the S1 pod. It is not interchangeable with lenses from Squadron, Squadron Sport, LP6, or other Baja Designs product families, which use different lens dimensions and retention systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy is polycarbonate used instead of glass?\u003c\/strong\u003e\u003cbr\u003ePolycarbonate is significantly more impact-resistant than glass, making it better suited for off-road environments where debris strikes are common. The hardcoat applied to the surface adds scratch resistance while maintaining optical clarity.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes swapping the lens void the warranty on my S1 pod?\u003c\/strong\u003e\u003cbr\u003eNo. Baja Designs states that swapping the lens using this kit does not void the Limited Lifetime warranty on the host S1 light pod.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need special tools to install the lens?\u003c\/strong\u003e\u003cbr\u003eNo special tools are required to complete the lens swap on an S1 pod.\u003c\/p\u003e","brand":"Baja Designs","offers":[{"title":"Default Title","offer_id":45948880552015,"sku":"BAJ660119","price":20.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/baja-designs-660119-s1-clear-work-scene-lens-kit.jpg?v=1782243045","url":"https:\/\/www.blackopsautoworks.com\/products\/baja-designs-660119-s1-headlight-lens-kit-clear-work-scene-beam","provider":"Black Ops Auto Works","version":"1.0","type":"link"}