{"product_id":"bilstein-14-18-ford-focus-b12-pro-kit","title":"Bilstein 14-18 Ford Focus B12 Pro-Kit","description":"\u003ch4\u003eRestore controlled suspension response with the correct application-specific component\u003c\/h4\u003e\u003cp\u003eBilstein 46-276681 is the B12 suspension kit identified for the applications and mounting position below. Bilstein B12 (Pro-Kit) suspension kits include a complete set of Bilstein Performance dampers paired with Eibach (Pro-Kit) springs that provide moderate lowering between 24-40mm (depending on application). These kits offer dampers and springs that are tuned for each specific application to provide the best fixed height lowering solution. Bilstein B12 (Pro-Kit) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eApplication-specific Bilstein B12 calibration\u003c\/li\u003e\n\u003cli\u003eBilstein 46-276681 is matched to the listed vehicle and mounting position\u003c\/li\u003e\n\u003cli\u003eDesigned to support controlled wheel movement and consistent damping\u003c\/li\u003e\n\u003cli\u003eUse with serviceable factory mounting points and compatible surrounding components\u003c\/li\u003e\n\u003cli\u003eExact vehicle, trim, and position coverage is limited to the Fitment table\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003cth\u003eApplication Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2014-2018\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eFocus\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003ctd\u003eUse only on the listed application and position\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd\u003e46-276681\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBilstein\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eB12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSuspension Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eApplication Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment Scope\u003c\/td\u003e\n\u003ctd\u003eVehicle specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne Bilstein B12 matched suspension kit for the listed application\u003c\/li\u003e\n\u003cli\u003eBilstein 46-276681 component or matched kit shown in the retained product images\u003c\/li\u003e\n\u003cli\u003eReplacement mounts, service tools, alignment, and unrelated chassis components are not included unless pictured and listed by the manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout Bilstein\u003c\/h4\u003e\u003cp\u003eBilstein develops OE replacement and performance suspension systems around controlled damping, application-specific dimensions, and vehicle-specific calibration. Its B-series products range from original-equipment-style replacement dampers to monotube performance shocks and matched spring-and-damper systems.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eVehicle-specific upper mounts and service hardware verified for the same chassis\u003c\/li\u003e\n\u003cli\u003eMatching opposite-side or axle components when the vehicle service procedure requires paired replacement\u003c\/li\u003e\n\u003cli\u003eAlignment and suspension inspection services after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the 46-276681?\u003c\/strong\u003e\u003cp\u003eIt is a Bilstein B12 suspension kit for the vehicle applications and position shown in the Fitment table.\u003c\/p\u003e\u003cstrong\u003eIs this a universal suspension part?\u003c\/strong\u003e\u003cp\u003eNo. This product is vehicle specific and should be used only on the listed applications.\u003c\/p\u003e\u003cstrong\u003eWhich mounting position does it use?\u003c\/strong\u003e\u003cp\u003eThe manufacturer identifies this component for the application specific position.\u003c\/p\u003e\u003cstrong\u003eShould shocks or struts be replaced in pairs?\u003c\/strong\u003e\u003cp\u003eFollow the vehicle service procedure and inspect the opposite side. Paired axle replacement is commonly recommended when wear or mileage is similar.\u003c\/p\u003e\u003cstrong\u003eAre mounts and springs included?\u003c\/strong\u003e\u003cp\u003eOnly the components stated in the What's Included section and shown in the retained exact-product images are supplied.\u003c\/p\u003e\u003cstrong\u003eIs an alignment required after installation?\u003c\/strong\u003e\u003cp\u003eAn alignment check is recommended whenever installation disturbs struts, control-arm positions, or other alignment-sensitive suspension points.\u003c\/p\u003e\u003cstrong\u003eCan this part be installed with worn mounts?\u003c\/strong\u003e\u003cp\u003eInspect mounts, bearings, bump stops, boots, and related hardware before installation and replace worn items with verified compatible parts.\u003c\/p\u003e\u003cstrong\u003eIs professional installation recommended?\u003c\/strong\u003e\u003cp\u003eYes. Suspension work can involve stored spring energy, vehicle lifting, torque procedures, and a final safety inspection.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eConfirm the vehicle and trim match the Fitment table and the package identifies Bilstein 46-276681.\u003c\/li\u003e\n\u003cli\u003eUse an approved lift procedure, support the vehicle securely, and follow the factory service manual.\u003c\/li\u003e\n\u003cli\u003eInspect mounts, bushings, boots, bump stops, fasteners, and nearby suspension components before assembly.\u003c\/li\u003e\n\u003cli\u003eInstall the component in the manufacturer-specified position without forcing or modifying mounting points.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners at the specified ride-height condition, verify clearance, and complete an alignment check when applicable.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e Cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":67929304268879,"sku":"BIL46-276681","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/bilstein-46-276681-suspension-kit-01.webp?v=1793316095","url":"https:\/\/www.blackopsautoworks.com\/products\/bilstein-14-18-ford-focus-b12-pro-kit","provider":"Black Ops Auto Works","version":"1.0","type":"link"}