{"product_id":"borla-25-26-nissan-murano-automatic-trans-2-0-awd-s-type-cat-back-exhaust","title":"Borla Cat-Back Exhaust for 2025-2026 Nissan Murano AWD","description":"\u003ch4\u003eUpgrade the 2.0L turbo Murano with a direct-fit Borla exhaust path\u003c\/h4\u003e\n\u003cp\u003eThe Borla 141034 Cat-Back exhaust system is engineered for the 2025-2026 Nissan Murano with the 2.0L turbocharged inline-four engine, automatic transmission, and all-wheel drive. It replaces the factory exhaust behind the catalytic converter with vehicle-specific front-pipe, intermediate-pipe, and muffler assemblies.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDirect-fit Cat-Back system for the confirmed Nissan Murano application.\u003c\/li\u003e\n\u003cli\u003eFront Pipe Assembly mates to the factory flange and reuses the original flange hardware.\u003c\/li\u003e\n\u003cli\u003eIntermediate Pipe Assembly and Muffler Assembly install in the original rubber isolators.\u003c\/li\u003e\n\u003cli\u003eAccuseal clamp connections permit final alignment before tightening.\u003c\/li\u003e\n\u003cli\u003eBorla specifies 32-35 ft-lbs for the Accuseal clamps.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\u003cli\u003eBorla 141034 is the exact AWD system documented by the manufacturer installation guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eYears \/ Requirements\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan Murano\u003c\/td\u003e\n\u003ctd\u003e2025-2026, 2.0L turbocharged inline-four, automatic transmission, AWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain restriction\u003c\/td\u003e\n\u003ctd\u003eAll-wheel drive only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eConfirm the vehicle has the 2.0L turbocharged engine, automatic transmission, and AWD drivetrain before ordering Borla 141034.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBorla\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e141034\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem type\u003c\/td\u003e\n\u003ctd\u003eCat-Back exhaust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine\u003c\/td\u003e\n\u003ctd\u003e2.0L turbocharged inline-four\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrivetrain\u003c\/td\u003e\n\u003ctd\u003eAWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamp type\u003c\/td\u003e\n\u003ctd\u003eAccuseal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamp torque\u003c\/td\u003e\n\u003ctd\u003e32-35 ft-lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFactory hardware reuse\u003c\/td\u003e\n\u003ctd\u003eOriginal front-pipe flange hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBorla 141034 Cat-Back exhaust system\u003c\/li\u003e\n\u003cli\u003eFront Pipe Assembly\u003c\/li\u003e\n\u003cli\u003eIntermediate Pipe Assembly\u003c\/li\u003e\n\u003cli\u003eMuffler Assembly\u003c\/li\u003e\n\u003cli\u003eAccuseal clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Borla\u003c\/h4\u003e\n\u003cp\u003eBorla develops vehicle-specific exhaust systems with application-matched routing, hangers, and connection points. The Borla 141034 installation guide documents the correct component sequence, original-isolator reuse, clearance checks, and final leak inspection.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Murano does this system fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt fits the 2025-2026 Nissan Murano with the 2.0L turbocharged inline-four, automatic transmission, and all-wheel drive.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this system for front-wheel-drive models?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The manufacturer installation guide identifies this part for the automatic AWD application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat assemblies are included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe documented system uses a front pipe assembly, intermediate pipe assembly, muffler assembly, and Accuseal clamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs factory hardware reused?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Save and reuse the original hardware connecting the front pipe flange to the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow tight should the clamps be?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBorla specifies 32-35 ft-lbs for the Accuseal clamps after the complete system is aligned.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan air impact tools be used?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Borla warns that impact tools can bend flanges or gasket-contact areas and cause leaks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should be checked after installation?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCheck clearance around wires, hoses, brake lines, body parts, and tires, then start the vehicle and inspect for leaks.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eAllow the factory exhaust to cool for at least one hour, raise the vehicle securely, wear eye protection, and lubricate the hangers, isolators, bolts, and nuts.\u003c\/li\u003e\n\u003cli\u003eRemove and retain the original flange hardware, release the front and rear muffler hangers and center support from their isolators, and lower the factory assembly out toward the rear.\u003c\/li\u003e\n\u003cli\u003eLay out the Borla components in order and mate the Front Pipe Assembly to the vehicle flange using the retained hardware without fully tightening it.\u003c\/li\u003e\n\u003cli\u003eSeat the front-pipe hanger in the original isolator, place an Accuseal clamp over the Intermediate Pipe Assembly, connect it to the front pipe, and seat its hanger.\u003c\/li\u003e\n\u003cli\u003ePlace the remaining clamp over the Muffler Assembly, connect it to the intermediate pipe, and insert its hangers into the original isolators.\u003c\/li\u003e\n\u003cli\u003eAlign the complete system for safe clearance, tighten the front-pipe hardware, and torque the Accuseal clamps to 32-35 ft-lbs without impact tools.\u003c\/li\u003e\n\u003cli\u003eCheck clearance from wires, hoses, brake lines, bodywork, and tires, start the vehicle, and repair any leak before driving.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":46375624867919,"sku":"BOR141034","price":1321.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/borla-141034-nissan-murano-awd-cat-back-exhaust-01.webp?v=1786311832","url":"https:\/\/www.blackopsautoworks.com\/products\/borla-25-26-nissan-murano-automatic-trans-2-0-awd-s-type-cat-back-exhaust","provider":"Black Ops Auto Works","version":"1.0","type":"link"}