{"product_id":"brembo-brekt04280-oe-front-disc-brake-kit-1999-2005-porsche-911","title":"Brembo OE 99-05 Porsche 911 Front Disc Brake Kit","description":"\u003ch4\u003eOE-Level Front Brake Restoration for the 1999-2005 Porsche 911\u003c\/h4\u003e\n\u003cp\u003eThe Brembo BREKT04280 is a complete front disc brake kit engineered for the 1999-2005 Porsche 911 (996 generation). Brembo is the original equipment brake supplier to Porsche, and the BREKT04280 delivers that same factory-grade engineering to the aftermarket in a single kit. The package includes two UV-coated, cross-drilled front rotors and a complete set of Prime NAO ceramic brake pads, giving the 911 front axle a full OE-matched brake service with no additional parts required.\u003c\/p\u003e\n\n\u003ch4\u003eWhy the Porsche 911 996 Demands OE-Grade Brake Components\u003c\/h4\u003e\n\u003cp\u003eThe 1999-2005 Porsche 911 is a rear-engine sports car with a distinctive brake bias and brake-by-wire characteristics on certain trims. Brake component quality directly affects pedal feel, stopping distance, and rotor longevity on a platform engineered to this level of precision. Brembo manufactures the BREKT04280 rotors from the same high-carbon cast iron alloy used on the Porsche production line, which delivers a higher vibration damping coefficient than standard grey iron and resists the thermal stress of repeated high-speed stops. The UV-coated, cross-drilled rotor design reduces heat buildup and provides a clean OE appearance. The included Prime NAO ceramic pads are low-dust, low-noise, and formulated for controlled all-temperature performance that complements the 911 platform.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eComplete front brake kit includes two UV-coated cross-drilled OE-specification front rotors and a full set of Prime NAO ceramic brake pads\u003c\/li\u003e\n\u003cli\u003eHigh-carbon cast iron rotor construction provides superior vibration damping, reduced brake noise, and improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eUV coating protects rotor surfaces from corrosion during shipping and burns off cleanly during initial brake-in\u003c\/li\u003e\n\u003cli\u003eCross-drilled rotor design reduces operating temperature and maintains the OE aesthetic of the 996-generation 911\u003c\/li\u003e\n\u003cli\u003ePrime NAO ceramic pads deliver low dust, low noise, and consistent all-temperature stopping power\u003c\/li\u003e\n\u003cli\u003eBrembo is the OE brake supplier to Porsche, making the BREKT04280 a factory-matched replacement\u003c\/li\u003e\n\u003cli\u003eAll rotor fixing hardware included for a complete front brake service\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment to factory caliper brackets on the 1999-2005 Porsche 911\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2005\u003c\/td\u003e\n\u003ctd\u003ePorsche\u003c\/td\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003eCarrera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2005\u003c\/td\u003e\n\u003ctd\u003ePorsche\u003c\/td\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003eCarrera 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2001-2005\u003c\/td\u003e\n\u003ctd\u003ePorsche\u003c\/td\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003eCarrera 4S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005\u003c\/td\u003e\n\u003ctd\u003ePorsche\u003c\/td\u003e\n\u003ctd\u003e911\u003c\/td\u003e\n\u003ctd\u003eCarrera S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (MPN)\u003c\/td\u003e\n\u003ctd\u003eBREKT04280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBrembo OE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit Type\u003c\/td\u003e\n\u003ctd\u003eFront Disc Brake Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Material\u003c\/td\u003e\n\u003ctd\u003eHigh-Carbon Cast Iron\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Finish\u003c\/td\u003e\n\u003ctd\u003eUV Coated, Cross-Drilled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePad Compound\u003c\/td\u003e\n\u003ctd\u003ePrime NAO Ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOE Supplier\u003c\/td\u003e\n\u003ctd\u003eYes, Brembo is OE supplier to Porsche\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2x Brembo high-carbon UV-coated cross-drilled front brake rotors\u003c\/li\u003e\n\u003cli\u003e1x set Brembo Prime NAO ceramic front brake pads\u003c\/li\u003e\n\u003cli\u003eRotor fixing hardware kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eAbout Brembo\u003c\/h4\u003e\n\u003cp\u003eBrembo is the world's leading manufacturer of automotive braking systems and has been an OE supplier to Porsche for decades. Founded in 1961 in Bergamo, Italy, Brembo engineers every component to the same exacting standards used on the production line. The BREKT04280 is manufactured using the same materials and tolerances as the original Porsche 911 brake components, ensuring a factory-matched replacement with no compromise in pedal feel, stopping distance, or rotor longevity.\u003c\/p\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWhat Porsche 911 models does the BREKT04280 fit?\u003c\/strong\u003e\n\u003cp\u003eThe BREKT04280 fits the 1999-2005 Porsche 911 Carrera, Carrera 4, Carrera 4S, and Carrera S (996 generation). Confirm your exact model year and trim before ordering, as rotor dimensions and caliper specifications vary across 911 variants.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes the BREKT04280 include both rotors and pads?\u003c\/strong\u003e\n\u003cp\u003eYes. The BREKT04280 is a complete front brake kit that includes two front rotors and a full set of front brake pads. All rotor fixing hardware is also included. No additional components are required for a complete front brake service.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat is the difference between BREKT04280, BREKT00733, and BREKT00732?\u003c\/strong\u003e\n\u003cp\u003eAll three kits fit the 1999-2005 Porsche 911 front axle but include different pad and rotor combinations. The BREKT04280 uses UV-coated cross-drilled rotors with Prime NAO ceramic pads. Verify the specific rotor diameter and pad friction code for your exact 911 trim when selecting between these kits.\u003c\/p\u003e\n\n\u003cstrong\u003eAre the BREKT04280 rotors cross-drilled from the factory?\u003c\/strong\u003e\n\u003cp\u003eYes. The BREKT04280 rotors feature a factory cross-drilled pattern that reduces operating temperature by allowing hot gases and debris to escape from the braking surface. The UV coating protects the rotor during shipping and burns off cleanly during the initial bedding procedure.\u003c\/p\u003e\n\n\u003cstrong\u003eIs Brembo the original brake supplier for the Porsche 911?\u003c\/strong\u003e\n\u003cp\u003eYes. Brembo is one of Porsche's primary OE brake suppliers and manufactures rotors and calipers for numerous Porsche production vehicles. The BREKT04280 uses the same high-carbon cast iron alloy and friction materials used on the Porsche 911 production line.\u003c\/p\u003e\n\n\u003cstrong\u003eDo I need to bed in the new pads and rotors?\u003c\/strong\u003e\n\u003cp\u003eYes. Perform 8 to 10 moderate stops from 40 mph, allowing the brakes to cool fully between each stop, before returning to aggressive or high-speed driving. Proper bedding ensures even pad material transfer onto the rotor surface, which maximizes stopping power and prevents uneven deposits that cause vibration.\u003c\/p\u003e\n\n\u003cstrong\u003eWill these rotors fit under factory Porsche 911 wheels?\u003c\/strong\u003e\n\u003cp\u003eYes. The BREKT04280 rotors are dimensioned to OE specification and will fit under factory and OEM-equivalent 911 wheels without modification. They bolt directly to the factory caliper brackets with no spacers or adapters required.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes the BREKT04280 come with a warranty?\u003c\/strong\u003e\n\u003cp\u003eYes. Brembo OE replacement kits are backed by a limited warranty covering defects in materials and workmanship. Contact your point of purchase for specific warranty terms and claim procedures.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSafely raise the vehicle on a lift or secure jack stands and remove the front wheels.\u003c\/li\u003e\n\u003cli\u003eRemove the front brake caliper by unbolting the caliper mounting bolts. Hang the caliper without stressing the brake line.\u003c\/li\u003e\n\u003cli\u003eRemove the caliper bracket bolts and set the bracket aside.\u003c\/li\u003e\n\u003cli\u003eRemove the old front rotor. Use a rubber mallet if the rotor is stuck to the hub.\u003c\/li\u003e\n\u003cli\u003eClean the hub face thoroughly with a wire brush and brake cleaner before mounting the new rotor.\u003c\/li\u003e\n\u003cli\u003eInstall the new BREKT04280 front rotor onto the hub and secure temporarily with a lug nut.\u003c\/li\u003e\n\u003cli\u003eReinstall the caliper bracket and torque to Porsche factory specification.\u003c\/li\u003e\n\u003cli\u003eInstall the new Prime NAO ceramic pads into the caliper carrier. Apply brake lubricant to the pad contact points only, not the friction surface.\u003c\/li\u003e\n\u003cli\u003eCompress the front caliper piston using a brake pad spreader or C-clamp.\u003c\/li\u003e\n\u003cli\u003eReinstall the caliper over the new pads and torque caliper bolts to factory specification.\u003c\/li\u003e\n\u003cli\u003eReinstall the wheel and torque to Porsche factory specification.\u003c\/li\u003e\n\u003cli\u003ePump the brake pedal until firm before moving the vehicle. Check and top off brake fluid as needed.\u003c\/li\u003e\n\u003cli\u003ePerform the full bedding procedure before high-speed or track use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Brembo OE","offers":[{"title":"Default Title","offer_id":46018984902735,"sku":"BREKT04280","price":248.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/68c98ff97e424741f6937b21cb55e1e6.jpg?v=1783428576","url":"https:\/\/www.blackopsautoworks.com\/products\/brembo-brekt04280-oe-front-disc-brake-kit-1999-2005-porsche-911","provider":"Black Ops Auto Works","version":"1.0","type":"link"}