{"product_id":"clutch-masters-clm08913p3d7rs-acura-integra-gs-725-pro-triple-disc-steel-flywheel","title":"Clutch Masters 97-01 Acura Integra GS 725 PRO Series Triple Disc Clutch w\/Steel Flywheel","description":"\u003ch4\u003eThe Ultimate Integra Clutch: Clutch Masters 725 PRO Triple Disc for 97-01 Acura Integra GS\u003c\/h4\u003e\u003cp\u003eThe Clutch Masters CLM08913P3D7RS is the 725 PRO Triple Disc clutch system engineered for the 1997-2001 Acura Integra GS, delivering the highest clutch capacity available in the Clutch Masters PRO Series lineup for this platform. A three-disc ceramic rigid setup paired with a forged steel flywheel and SFI-certified pressure plate provides approximately 725 lb-ft of torque capacity while maintaining direct bolt-in compatibility with the B-series engine platform. Whether the application is a fully built B18C5 swap, forced induction, or an all-motor drag build, the CLM08913P3D7RS handles the power and survives the abuse.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e725 PRO Triple Disc configuration for maximum clutch capacity on the 97-01 Acura Integra GS\u003c\/li\u003e\n\u003cli\u003eThree ceramic rigid discs provide superior heat dissipation and torque capacity over twin-disc setups\u003c\/li\u003e\n\u003cli\u003eForged steel flywheel included in CLM08913P3D7RS for reduced rotating mass and sharper clutch feel\u003c\/li\u003e\n\u003cli\u003eSFI-certified pressure plate meets sanctioned race event requirements\u003c\/li\u003e\n\u003cli\u003eComplete bolt-in kit with release bearing, pilot bearing, and alignment tool included\u003c\/li\u003e\n\u003cli\u003eFits 1997-2001 Acura Integra GS with standard B-series manual transmission\u003c\/li\u003e\n\u003cli\u003eCLM08913P3D7RS ceramic rigid discs provide consistent engagement under sustained high-load operation\u003c\/li\u003e\n\u003cli\u003eRated at approximately 725 lb-ft torque capacity for heavily modified B-series and swap builds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1997-2001\u003c\/td\u003e\n\u003ctd\u003eAcura\u003c\/td\u003e\n\u003ctd\u003eIntegra\u003c\/td\u003e\n\u003ctd\u003eGS\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eCLM08913P3D7RS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eClutch Masters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003e725 PRO Triple Disc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisc Diameter\u003c\/td\u003e\n\u003ctd\u003e7.25 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisc Material\u003c\/td\u003e\n\u003ctd\u003eCeramic Rigid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisc Count\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlywheel Type\u003c\/td\u003e\n\u003ctd\u003eForged Steel (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlywheel Certification\u003c\/td\u003e\n\u003ctd\u003eSFI Certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003e1997-2001 Acura Integra GS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e725 PRO triple-disc clutch pack with pressure plate\u003c\/li\u003e\n\u003cli\u003eForged steel flywheel\u003c\/li\u003e\n\u003cli\u003ePilot bearing\u003c\/li\u003e\n\u003cli\u003eRelease bearing\u003c\/li\u003e\n\u003cli\u003eClutch alignment tool\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout Clutch Masters\u003c\/h4\u003e\u003cp\u003eClutch Masters has been engineering performance clutch systems in the United States since 1988. Their PRO Series triple-disc kits represent the highest capacity options in the lineup for each application, providing ceramic rigid multi-disc setups with complete hardware packages for straightforward installation. Clutch Masters products are trusted by drag racers, time attack competitors, and high-output builds worldwide.\u003c\/p\u003e\u003ch4\u003eRelated Parts on Our Site\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/clutch-masters-clm08913ptd7rs-acura-integra-gs-725-pro-twin-disc-steel-flywheel\"\u003eCLM08913PTD7RS — Clutch Masters 97-01 Acura Integra GS 725 PRO Twin Disc w\/Steel Flywheel\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\u003cstrong\u003eWhat is the CLM08913P3D7RS?\u003c\/strong\u003e\u003cp\u003eThe CLM08913P3D7RS is the Clutch Masters 725 PRO Triple Disc clutch kit with forged steel flywheel for the 1997-2001 Acura Integra GS. It uses three ceramic rigid discs and is rated at approximately 725 lb-ft of torque capacity, making it the highest-capacity Clutch Masters PRO Series option for this Integra application.\u003c\/p\u003e\u003cstrong\u003eWhat is the difference between the CLM08913P3D7RS triple disc and the CLM08913PTD7RS twin disc?\u003c\/strong\u003e\u003cp\u003eThe CLM08913P3D7RS uses three ceramic rigid discs, providing higher clamping surface area and greater heat capacity than the CLM08913PTD7RS twin-disc version. The triple-disc setup is best suited for extreme horsepower applications requiring maximum clutch capacity, while the twin-disc version handles most high-performance street and track builds.\u003c\/p\u003e\u003cstrong\u003eDoes the CLM08913P3D7RS fit only the Integra GS?\u003c\/strong\u003e\u003cp\u003eThe CLM08913P3D7RS is specifically listed for the 1997-2001 Acura Integra GS trim. Fitment on other Integra trims with different transmissions or bellhousings should be verified directly with Clutch Masters before ordering.\u003c\/p\u003e\u003cstrong\u003eDoes the CLM08913P3D7RS include a flywheel?\u003c\/strong\u003e\u003cp\u003eYes. The S suffix in CLM08913P3D7RS confirms the forged steel flywheel is included. The kit ships with the triple-disc clutch pack, flywheel, release bearing, pilot bearing, alignment tool, and hardware.\u003c\/p\u003e\u003cstrong\u003eIs the CLM08913P3D7RS street drivable on the Acura Integra?\u003c\/strong\u003e\u003cp\u003eA triple-disc ceramic PRO Series clutch has a very aggressive engagement profile. While technically usable on the street, it is primarily intended for drag racing and track use. Expect a much stiffer pedal and abrupt engagement compared to any stock or mild aftermarket clutch.\u003c\/p\u003e\u003cstrong\u003eWhat torque capacity does the CLM08913P3D7RS support?\u003c\/strong\u003e\u003cp\u003eThe 725 PRO triple-disc system is rated at approximately 725 lb-ft, supporting extreme B-series builds including turbo, supercharged, and high-compression all-motor applications that exceed the capacity of twin-disc setups.\u003c\/p\u003e\u003cstrong\u003eIs CLM08913P3D7RS SFI certified?\u003c\/strong\u003e\u003cp\u003eYes. The pressure plate and forged steel flywheel in the CLM08913P3D7RS both carry SFI certification, meeting requirements for sanctioned drag racing and other competition events.\u003c\/p\u003e\u003cstrong\u003eWhat break-in period does the CLM08913P3D7RS require?\u003c\/strong\u003e\u003cp\u003eClutch Masters recommends a 500-mile break-in period, avoiding hard launches and excessive clutch slip to allow the three ceramic friction surfaces to seat correctly and achieve full performance.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eSafely lift the vehicle and support on jack stands. Disconnect the battery.\u003c\/li\u003e\n\u003cli\u003eRemove the axle shafts and any transmission support bracing.\u003c\/li\u003e\n\u003cli\u003eRemove the transmission from the engine block.\u003c\/li\u003e\n\u003cli\u003eUnbolt and remove the OEM flywheel and clutch assembly.\u003c\/li\u003e\n\u003cli\u003eClean the crankshaft flange and inspect for wear.\u003c\/li\u003e\n\u003cli\u003eInstall the CLM08913P3D7RS forged steel flywheel and torque to B-series spec.\u003c\/li\u003e\n\u003cli\u003eInsert the alignment tool through the triple-disc stack into the pilot bearing.\u003c\/li\u003e\n\u003cli\u003eMount the pressure plate and tighten bolts in a star pattern, then torque to specification.\u003c\/li\u003e\n\u003cli\u003eInstall the new release bearing on the transmission input shaft.\u003c\/li\u003e\n\u003cli\u003eReinstall the transmission, reconnect axle shafts and drivetrain components.\u003c\/li\u003e\n\u003cli\u003eLower the vehicle, reconnect the battery, and follow the Clutch Masters break-in procedure.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Clutch Masters","offers":[{"title":"Default Title","offer_id":46038757245007,"sku":"CLM08913P3D7RS","price":1778.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/Clutch_Masters_725_PRO_twin_disc_clutch_side_view.png?v=1783951629","url":"https:\/\/www.blackopsautoworks.com\/products\/clutch-masters-clm08913p3d7rs-acura-integra-gs-725-pro-triple-disc-steel-flywheel","provider":"Black Ops Auto Works","version":"1.0","type":"link"}