{"product_id":"cobb-571001-mazdaspeed3-gen1-exhaust-hanger-kit-2007-2009","title":"Cobb Mazdaspeed3 Gen1 Exhaust Hanger Kit","description":"\u003ch4\u003eKeep Your COBB Exhaust Firmly in Place on the 2007-2009 Mazdaspeed3\u003c\/h4\u003e\n\u003cp\u003eThe COBB 571001 Mazdaspeed3 Gen1 Exhaust Hanger Kit replaces the factory rubber hangers on 2007-2009 Mazdaspeed3 hatchbacks with a complete set of high-durability urethane mounts. The stock rubber hangers are soft by design, which allows your exhaust to sway, tap the subframe, or contact the exhaust tunnel under hard cornering and aggressive driving. Upgrading to urethane eliminates that movement and reduces the occasional rattle or rubbing that plagues stock and aftermarket exhaust systems on spirited Mazdaspeed3 builds.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCOBB 571001 complete hanger kit includes all 4 hangers required for a full Mazdaspeed3 Gen1 exhaust system\u003c\/li\u003e\n\u003cli\u003eHigh-durability urethane construction significantly more rigid than factory rubber mounts\u003c\/li\u003e\n\u003cli\u003eReduces excessive exhaust movement that causes rattles, subframe contact, and exhaust tunnel rubbing\u003c\/li\u003e\n\u003cli\u003eIncludes 3 twist-in style hangers and 1 two-hole conventional hanger for full system coverage\u003c\/li\u003e\n\u003cli\u003eExact replacement dimensions for direct fitment on 2007-2009 Mazdaspeed3\u003c\/li\u003e\n\u003cli\u003eDesigned to work with both the COBB 571100 SS 3-inch Cat-Back Exhaust and aftermarket exhaust systems\u003c\/li\u003e\n\u003cli\u003eNo modifications required for installation on Gen1 Mazdaspeed3 hatchbacks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2009\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eMazdaspeed3\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2009\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eMazdaspeed3\u003c\/td\u003e\n\u003ctd\u003eGrand Touring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e571001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCOBB Tuning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eExhaust Hanger Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-durability urethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003e2007-2009 Mazda Mazdaspeed3 (Gen1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHanger Types\u003c\/td\u003e\n\u003ctd\u003e3x Twist-In, 1x Two-Hole Conventional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 hangers (complete set)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eDirect replacement, no modifications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e3 urethane twist-in exhaust hangers\u003c\/li\u003e\n\u003cli\u003e1 urethane two-hole conventional exhaust hanger\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWhat years does the COBB 571001 exhaust hanger kit fit?\u003c\/strong\u003e\n\u003cp\u003eThe COBB 571001 is designed specifically for the first generation Mazdaspeed3, covering model years 2007, 2008, and 2009. It does not fit the second generation Mazdaspeed3 produced from 2010 to 2013. If you have a Gen2 Mazdaspeed3, look for the COBB Gen2 specific hanger kit.\u003c\/p\u003e\n\n\u003cstrong\u003eWhy should I replace my factory exhaust hangers with urethane?\u003c\/strong\u003e\n\u003cp\u003eThe factory rubber hangers are intentionally soft to isolate NVH (noise, vibration, and harshness) in a comfort-oriented stock vehicle. However, with a performance exhaust installed, that softness allows the system to sway and occasionally contact the subframe or exhaust tunnel under hard driving. Urethane is significantly more rigid, reducing movement and eliminating the rattles and contact that aftermarket exhaust owners commonly experience.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes the COBB 571001 kit include everything I need to replace all the hangers on my Mazdaspeed3?\u003c\/strong\u003e\n\u003cp\u003eYes. The kit includes all 4 hangers needed for the complete Mazdaspeed3 Gen1 exhaust system. There are 3 twist-in hangers and 1 two-hole conventional hanger. No additional pieces are required for a full replacement.\u003c\/p\u003e\n\n\u003cstrong\u003eWill the COBB 571001 hangers work with my non-COBB aftermarket exhaust?\u003c\/strong\u003e\n\u003cp\u003eYes. The COBB 571001 hangers are replacement pieces for the factory hanger mounting points on the 2007-2009 Mazdaspeed3. As long as your aftermarket exhaust uses the same hanger loop points as the factory system, these urethane mounts will work with it. They are not exclusive to the COBB cat-back exhaust.\u003c\/p\u003e\n\n\u003cstrong\u003eHow difficult is it to install the COBB 571001 exhaust hangers?\u003c\/strong\u003e\n\u003cp\u003eInstallation is straightforward with basic hand tools. You will need exhaust hanger removal pliers (or a flathead screwdriver with some effort) and silicone spray lubricant to ease the urethane hangers into place. The twist-in hangers require rotating them into the mounting hooks, while the two-hole conventional hanger slides straight onto the posts. Total install time is typically under 30 minutes with the car safely raised on jack stands.\u003c\/p\u003e\n\n\u003cstrong\u003eWill urethane exhaust hangers increase cabin noise or vibration on my Mazdaspeed3?\u003c\/strong\u003e\n\u003cp\u003eUrethane does transmit slightly more vibration than rubber due to its greater rigidity, which is the same property that reduces exhaust movement. Most Mazdaspeed3 owners report the increase in cabin noise or vibration is minimal and well within acceptable range, particularly when paired with an aftermarket exhaust that already changes the sound signature. The tradeoff in reduced rattling and exhaust movement is generally considered worthwhile.\u003c\/p\u003e\n\n\u003cstrong\u003eAre these hangers a direct bolt-on replacement for the Gen1 Mazdaspeed3 or do they require modification?\u003c\/strong\u003e\n\u003cp\u003eThese are direct replacement hangers requiring no modification to the vehicle or exhaust. They install in the same positions as the factory rubber mounts using the existing hanger hooks and mounting posts on the 2007-2009 Mazdaspeed3.\u003c\/p\u003e\n\n\u003cstrong\u003eCan the COBB 571001 hangers be used on the standard Mazda 3 (non-Mazdaspeed) from 2007-2009?\u003c\/strong\u003e\n\u003cp\u003eThe COBB 571001 is specifically designed and tested for the 2007-2009 Mazdaspeed3 exhaust system layout. The standard Mazda 3 may have different hanger configurations depending on trim and engine. COBB does not list the standard Mazda 3 as a compatible application for this kit, so it is recommended to verify your vehicle's hanger points before purchasing.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSafely raise and support the vehicle on jack stands, ensuring adequate clearance to work under the exhaust system.\u003c\/li\u003e\n\u003cli\u003eApply silicone spray lubricant generously to the factory rubber hangers and the mounting hooks to ease removal.\u003c\/li\u003e\n\u003cli\u003eUse exhaust hanger removal pliers or a flathead screwdriver to pry each factory rubber hanger off its mounting hook, starting from the rear and working forward.\u003c\/li\u003e\n\u003cli\u003eApply silicone spray lubricant to the new COBB urethane hangers before installation to ease fitment.\u003c\/li\u003e\n\u003cli\u003eInstall the 3 twist-in urethane hangers by aligning the loop with the mounting hook and rotating the hanger to lock it into position.\u003c\/li\u003e\n\u003cli\u003eInstall the 1 two-hole conventional urethane hanger by sliding it straight onto the mounting posts at its designated location.\u003c\/li\u003e\n\u003cli\u003eVerify that the exhaust system is properly seated and all 4 hangers are fully engaged before lowering the vehicle.\u003c\/li\u003e\n\u003cli\u003eStart the engine and check for any unusual vibration or contact with the subframe or tunnel, making minor position adjustments if needed.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"COBB","offers":[{"title":"Default Title","offer_id":46010626867279,"sku":"COBB571001","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/COBB_Exhaust_Hanger_Kit_2007-2009_Mazdaspeed3.jpg?v=1783344069","url":"https:\/\/www.blackopsautoworks.com\/products\/cobb-571001-mazdaspeed3-gen1-exhaust-hanger-kit-2007-2009","provider":"Black Ops Auto Works","version":"1.0","type":"link"}