{"product_id":"corsa-20-22-ford-mustang-gt500-3-0in-dual-rear-exit-catback-w-twin-5-0in-black-carbon-fiber-tips","title":"CORSA Xtreme Active Cat-Back Exhaust for 2020-2022 Ford Mustang Shelby GT500","description":"\u003ch4\u003eKeep the cruise calm and open up the supercharged V8 on demand\u003c\/h4\u003e\u003cp\u003eThe CORSA Performance 21292CFBLK gives the Shelby GT500 a 3-inch active-valve cat-back with factory-mode control, a broad Touring-to-Xtreme sound range, and four black carbon-fiber outlets.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCORSA Performance 21292CFBLK: Xtreme-to-Touring active sound range controlled through the factory exhaust modes\u003c\/li\u003e\n\u003cli\u003e3-inch dual-rear-exit tubing in corrosion-resistant 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eFour 5-inch outlets finished with black carbon-fiber dual-wall tips\u003c\/li\u003e\n\u003cli\u003eCORSA active valves retain the vehicle's factory solenoids and controls\u003c\/li\u003e\n\u003cli\u003eReflective Sound Cancellation technology targets drone during steady-speed cruising\u003c\/li\u003e\n\u003cli\u003eStraight-through muffler construction and a Double Helixx dual-crossover X-pipe\u003c\/li\u003e\n\u003cli\u003eManufacturer reports a 23.4 percent increase in exhaust flow over stock\u003c\/li\u003e\n\u003cli\u003eManufacturer reports an 11-decibel range across the available exhaust modes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003cp\u003eUse CORSA Performance 21292CFBLK only for the applications below. Confirm every listed qualifier and exclusion.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2020-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eShelby GT500; 5.2L supercharged V8; Fastback; Factory active-valve exhaust required; Excludes: Mustang GT, EcoBoost, Mach 1, and vehicles without factory active-valve exhaust\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCORSA Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd\u003e21292CFBLK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eActive Valve Cat-Back Exhaust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExhaust Type\u003c\/td\u003e\n\u003ctd\u003eActive-valve cat-back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSound Level\u003c\/td\u003e\n\u003ctd\u003eXtreme to Touring Active\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePipe Diameter\u003c\/td\u003e\n\u003ctd\u003e3.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit Style\u003c\/td\u003e\n\u003ctd\u003eDual rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Layout\u003c\/td\u003e\n\u003ctd\u003eQuad outlets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Size\u003c\/td\u003e\n\u003ctd\u003e5.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Material\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber with stainless-steel inner cones\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Finish\u003c\/td\u003e\n\u003ctd\u003eBlack carbon fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain Construction\u003c\/td\u003e\n\u003ctd\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eValve Requirement\u003c\/td\u003e\n\u003ctd\u003eFactory active-valve exhaust and factory solenoids required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e847466029608\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Manufacture\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eComplete active-valve cat-back exhaust system for CORSA Performance 21292CFBLK\u003c\/li\u003e\n\u003cli\u003eTwin black carbon-fiber tip assemblies with four 5-inch outlets\u003c\/li\u003e\n\u003cli\u003eCORSA valve assemblies\u003c\/li\u003e\n\u003cli\u003eDouble-crossover X-pipe\u003c\/li\u003e\n\u003cli\u003eClamps and installation hardware\u003c\/li\u003e\n\u003cli\u003eNot included: Factory valve solenoids and active-exhaust electronics, which are reused from the vehicle\u003c\/li\u003e\n\u003cli\u003eNot included: Exhaust manifolds, catalytic converters, and installation labor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout CORSA Performance\u003c\/h4\u003e\u003cp\u003eCORSA Performance engineers vehicle-specific exhaust systems around its Reflective Sound Cancellation technology, stainless-steel construction, and application-tuned acoustics. This GT500 system was developed to retain the factory valve controls while adding a wider sound range and more exhaust flow.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\u003cli\u003ePair this system only with GT500-compatible exhaust hardware, heat protection, and service parts that preserve the factory active-valve controls.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the 21292CFBLK?\u003c\/strong\u003e\u003cp\u003eIt is CORSA's 3-inch Xtreme active-valve cat-back for the 2020-2022 Mustang Shelby GT500, finished with black carbon-fiber tips.\u003c\/p\u003e\u003cstrong\u003eWhich Mustang models does this exhaust fit?\u003c\/strong\u003e\u003cp\u003eIt fits 2020-2022 Ford Mustang Shelby GT500 fastbacks with the supercharged 5.2L V8 and factory active-valve exhaust.\u003c\/p\u003e\u003cstrong\u003eWill it fit a Mustang GT, Mach 1, or EcoBoost?\u003c\/strong\u003e\u003cp\u003eNo. CORSA lists this configuration only for the Shelby GT500 application shown in the fitment table.\u003c\/p\u003e\u003cstrong\u003eDoes it retain the factory exhaust modes?\u003c\/strong\u003e\u003cp\u003eYes. The CORSA valves work with the GT500's factory solenoids and active-exhaust controls.\u003c\/p\u003e\u003cstrong\u003eHow loud is the system?\u003c\/strong\u003e\u003cp\u003eCORSA describes an Xtreme-to-Touring active range with an approximately 11-decibel difference across the vehicle's exhaust modes.\u003c\/p\u003e\u003cstrong\u003eWhat are the exhaust tips made from?\u003c\/strong\u003e\u003cp\u003eThe four 5-inch outlets use black carbon-fiber outer construction with stainless-steel inner cones.\u003c\/p\u003e\u003cstrong\u003eIs welding required?\u003c\/strong\u003e\u003cp\u003eThe system is designed as a bolt-on cat-back. CORSA does not recommend welding its exhaust systems because welding prevents adjustment and can affect warranty coverage.\u003c\/p\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cp\u003eCORSA lists lifetime exhaust coverage and five-year valve coverage under its current warranty terms.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eAllow the exhaust to cool completely, raise the vehicle securely, and disconnect the factory active-exhaust wiring before removal.\u003c\/li\u003e\n\u003cli\u003eRemove the factory cat-back while retaining the valve solenoids, wiring, hangers, and any factory connection hardware called for by the vehicle service procedure.\u003c\/li\u003e\n\u003cli\u003eAssemble the CORSA X-pipe, muffler sections, valves, and black carbon-fiber tip assemblies loosely so alignment can be adjusted.\u003c\/li\u003e\n\u003cli\u003eTransfer and connect the factory valve solenoids, then align the pipes, hangers, and four outlets with adequate chassis and bumper clearance.\u003c\/li\u003e\n\u003cli\u003eTighten all hardware to the current CORSA and Ford service specifications, cycle every factory exhaust mode, and check for leaks or contact after the first heat cycle.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e Cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"CORSA Performance","offers":[{"title":"Default Title","offer_id":67878249889871,"sku":"COR21292CFBLK","price":2899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/corsa-performance-21292cfblk-active-valve-cat-back-exhaust-01-1000.webp?v=1793044137","url":"https:\/\/www.blackopsautoworks.com\/products\/corsa-20-22-ford-mustang-gt500-3-0in-dual-rear-exit-catback-w-twin-5-0in-black-carbon-fiber-tips","provider":"Black Ops Auto Works","version":"1.0","type":"link"}