{"product_id":"corsa-44013mt-carbon-fiber-intake-2024-mustang-gt-dark-horse","title":"Corsa 2024+ Ford Mustang GT 5.0L Carbon Fiber Cold Air Intake w\/ MaxFlow Oiled Air Filters - Matte","description":"\u003ch4\u003eA Dual-Path Matte Carbon Fiber Intake Built for the S650 Mustang GT and Dark Horse\u003c\/h4\u003e\n\u003cp\u003eThe Corsa Performance 44013MT is a true dual-path carbon fiber cold air intake system engineered specifically for the 2024+ Ford Mustang GT 5.0L V8 (S650) and the 2024+ Ford Mustang Dark Horse. The COR44013MT routes two independent airflow paths through matte carbon fiber tubes into clear high-domed polycarbonate lids that seal the system against engine heat while leaving the intake internals visible. Dyno testing confirms gains of +17 horsepower at 7,125 RPM and +13 lb-ft of torque at 4,525 RPM over the stock intake system, with no tune required for installation.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCorsa 44013MT true dual-path design pulls air independently through two separate inlets for maximum volumetric flow into the 5.0L Coyote V8\u003c\/li\u003e\n\u003cli\u003eMatte carbon fiber intake tubes match the stock engine cover finish on the S650 Mustang GT for a factory-plus appearance\u003c\/li\u003e\n\u003cli\u003eIndustry-first clear high-domed polycarbonate intake lids seal against underhood heat while showcasing the air filter assembly\u003c\/li\u003e\n\u003cli\u003eDyno-proven gains of +17 HP at 7,125 RPM and +13 lb-ft of torque at 4,525 RPM over the factory intake system\u003c\/li\u003e\n\u003cli\u003eMachined aluminum MAF mounting plates maintain proper mass airflow sensor positioning for accurate fuel delivery\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum hardware and stainless steel T-bolt clamps ensure corrosion resistance and consistent clamping force\u003c\/li\u003e\n\u003cli\u003eMulti-ply silicone couplers provide heat resistance and durability at every connection point\u003c\/li\u003e\n\u003cli\u003eIncludes MaxFlow oiled air filters with 98% filtration efficiency and 50,000-mile maintenance interval\u003c\/li\u003e\n\u003cli\u003eRetains stock air box locations for clean, reversible installation without cutting or drilling\u003c\/li\u003e\n\u003cli\u003eNo tune required for street use on 2024+ S650 Mustang GT 5.0L and Dark Horse platforms\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty on all intake components; 1-year warranty on MaxFlow filters\u003c\/li\u003e\n\u003cli\u003eCARB EO unavailable; not legal for sale or use on pollution-controlled vehicles in California\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT 5.0L V8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eDark Horse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e44013MT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCORSA Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Type\u003c\/td\u003e\n\u003ctd\u003eTrue Dual-Path Cold Air Intake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eMatte Carbon Fiber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLid Material\u003c\/td\u003e\n\u003ctd\u003eClear High-Domed Polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilter Type\u003c\/td\u003e\n\u003ctd\u003eMaxFlow Oiled Air Filters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiltration Efficiency\u003c\/td\u003e\n\u003ctd\u003e98%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilter Maintenance Interval\u003c\/td\u003e\n\u003ctd\u003e50,000 miles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHorsepower Gain\u003c\/td\u003e\n\u003ctd\u003e+17 HP at 7,125 RPM (dyno-proven)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTorque Gain\u003c\/td\u003e\n\u003ctd\u003e+13 lb-ft at 4,525 RPM (dyno-proven)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTune Required\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCARB EO\u003c\/td\u003e\n\u003ctd\u003eNot Available (not CA legal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime (intake); 1 Year (MaxFlow filters)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003e2024+ Ford Mustang GT 5.0L V8 (S650), 2024+ Mustang Dark Horse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e847466028304\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2x Matte carbon fiber intake tubes\u003c\/li\u003e\n\u003cli\u003e2x Clear high-domed polycarbonate intake lids\u003c\/li\u003e\n\u003cli\u003e2x MaxFlow oiled air filters\u003c\/li\u003e\n\u003cli\u003e2x Machined aluminum MAF mounting plates\u003c\/li\u003e\n\u003cli\u003eMulti-ply silicone intake couplers\u003c\/li\u003e\n\u003cli\u003eStainless steel T-bolt clamps\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum hardware\u003c\/li\u003e\n\u003cli\u003eCorsa Performance installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eAbout CORSA Performance\u003c\/h4\u003e\n\u003cp\u003eCORSA Performance has been engineering high-performance intake and exhaust systems in Berea, Ohio since 1989. Every intake system in their lineup, including the 44013MT for the S650 Mustang GT and Dark Horse, is dyno-developed on the specific platform it is built for before going to market. CORSA backs their intake components with a Limited Lifetime Warranty and stands behind the performance claims published for each system with documented dyno data.\u003c\/p\u003e\n\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the difference between the Corsa 44013MT and the 44013DMT?\u003c\/strong\u003e\n\u003cp\u003eThe 44013MT includes MaxFlow oiled air filters while the 44013DMT includes DryTech oil-free filters. Both intakes use the same matte carbon fiber tubes and dual-path housing. If you prefer a low-maintenance filter that requires no oiling, the 44013DMT is the better choice. If you want maximum airflow and are comfortable with periodic filter oiling, the 44013MT with MaxFlow filters is the appropriate variant. The performance gains are comparable between the two filter types.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes the Corsa 44013MT require a tune on the 2024 Mustang GT?\u003c\/strong\u003e\n\u003cp\u003eNo. The Corsa COR44013MT is designed to be installed without requiring an ECU tune on 2024+ S650 Mustang GT 5.0L and Dark Horse vehicles. The system retains the factory air box locations and uses machined MAF mounting plates to preserve proper mass airflow sensor positioning. Corsa does not require a tune for street use on this application. If you are building a forced induction or high-output combination, a custom tune will be appropriate, but it is not a requirement of the 44013MT installation itself.\u003c\/p\u003e\n\n\u003cstrong\u003eIs the Corsa 44013MT compatible with the 2024 Mustang Dark Horse?\u003c\/strong\u003e\n\u003cp\u003eYes. The Corsa 44013MT is explicitly compatible with both the 2024+ Ford Mustang GT 5.0L V8 (S650) and the 2024+ Ford Mustang Dark Horse. The Dark Horse uses the same 5.0L Coyote V8 platform as the GT and shares the intake mounting architecture that the dual-path 44013MT system was designed around.\u003c\/p\u003e\n\n\u003cstrong\u003eIs the Corsa 44013MT California legal?\u003c\/strong\u003e\n\u003cp\u003eNo. The Corsa 44013MT does not have a CARB Executive Order (EO) number and is not legal for sale or use on pollution-controlled vehicles in California. If you are located in California or plan to register and use your vehicle in California, this intake cannot be legally installed. Corsa notes CARB EO is unavailable for this system. If California compliance is a requirement, consider a CARB-legal intake alternative.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat horsepower gains can I expect from the Corsa 44013MT on the S650 Mustang GT?\u003c\/strong\u003e\n\u003cp\u003eCorsa's dyno testing shows the 44013MT delivers +17 horsepower at 7,125 RPM and +13 lb-ft of torque at 4,525 RPM compared to the stock intake system on the 2024+ Mustang GT 5.0L. These figures are measured on Corsa's dynos in controlled conditions on an otherwise stock vehicle. Real-world results will vary based on vehicle condition, ambient temperature, fuel quality, and other installed modifications.\u003c\/p\u003e\n\n\u003cstrong\u003eHow often do I need to clean the MaxFlow filters included with the COR44013MT?\u003c\/strong\u003e\n\u003cp\u003eThe MaxFlow oiled air filters included with the 44013MT have a maintenance interval of 50,000 miles under normal driving conditions. At that interval, the filters should be removed, cleaned with the appropriate filter cleaner, allowed to dry fully, and re-oiled before reinstallation. Do not use compressed air to clean MaxFlow oiled filters, as it can damage the filter media. CORSA backs the MaxFlow filters with a 1-year warranty against manufacturing defects.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes the Corsa 44013MT void the factory Mustang warranty?\u003c\/strong\u003e\n\u003cp\u003eThe Magnuson-Moss Warranty Act prohibits dealers from voiding your factory warranty solely because you installed an aftermarket part. However, if a dealer can demonstrate that a specific aftermarket part caused a specific failure, that portion of the warranty claim can be denied. The 44013MT is designed to install cleanly and without modification to the vehicle's fuel, ignition, or ECU systems, which limits warranty exposure. It is recommended to document your installation and retain the stock intake components for reinstallation before any powertrain warranty service visits.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat is the warranty on the Corsa 44013MT intake system?\u003c\/strong\u003e\n\u003cp\u003eCORSA Performance provides a Limited Lifetime Warranty on all intake parts and components in the 44013MT system for the original retail purchaser with proof of purchase, for the life of the vehicle on which the system was originally installed. The MaxFlow oiled air filters carry a separate 1-year warranty against manufacturing defects. This warranty does not cover race or competition use, modification, misuse, or damage caused by improper installation. To initiate a warranty claim, contact CORSA Performance directly to obtain a Return Goods Authorization number before shipping product.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes the Corsa 44013MT use the stock airbox mounting points?\u003c\/strong\u003e\n\u003cp\u003eYes. The COR44013MT retains the factory air box locations on the 2024+ S650 Mustang GT and Dark Horse. This design approach allows for a clean, reversible installation that does not require cutting, drilling, or permanent modification to the engine bay. Retaining the stock mounting locations also contributes to the system's factory-plus appearance under the hood.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect the negative battery terminal before beginning installation.\u003c\/li\u003e\n\u003cli\u003eRemove the stock air intake tube by loosening the clamp at the throttle body connection and disconnecting the mass airflow sensor electrical connector.\u003c\/li\u003e\n\u003cli\u003eRemove the factory air filter housing by disconnecting the intake snorkel and unbolting the housing from the stock mounting points.\u003c\/li\u003e\n\u003cli\u003eInstall the machined aluminum MAF mounting plates onto the new matte carbon fiber intake tubes as shown in the Corsa instructions. Reconnect the MAF sensor wiring to the MAF plates.\u003c\/li\u003e\n\u003cli\u003ePosition the matte carbon fiber intake tubes at the stock air box mounting locations. Secure the mounting hardware using the included anodized aluminum fasteners.\u003c\/li\u003e\n\u003cli\u003eInstall the MaxFlow oiled air filters onto the open ends of the carbon fiber intake tubes and secure with the provided stainless T-bolt clamps.\u003c\/li\u003e\n\u003cli\u003ePosition the clear high-domed polycarbonate lids over the air filter assemblies and secure as directed in the installation guide.\u003c\/li\u003e\n\u003cli\u003eConnect the silicone coupler at the throttle body inlet and tighten the T-bolt clamp to the specified torque.\u003c\/li\u003e\n\u003cli\u003eReconnect the negative battery terminal.\u003c\/li\u003e\n\u003cli\u003eStart the engine and verify no air leaks are present at any connection point. Check that the MAF sensor wiring harness is clear of any moving or hot components before driving.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"CORSA Performance","offers":[{"title":"Default Title","offer_id":46036024328271,"sku":"COR44013MT","price":874.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/Corsa_44013MT_Carbon_Fiber_Intake_2024_Mustang_GT.png?v=1783690125","url":"https:\/\/www.blackopsautoworks.com\/products\/corsa-44013mt-carbon-fiber-intake-2024-mustang-gt-dark-horse","provider":"Black Ops Auto Works","version":"1.0","type":"link"}