{"product_id":"dv8-mcfsnsr-01-ford-parking-sensor-bezels-set-of-4","title":"DV8 Motorcraft (Ford) Parking Sensor Bezels (Set of 4)","description":"\u003ch4\u003eClean, Factory-Style Parking Sensor Bezels That Integrate Flush with Your Ford's Bumper\u003c\/h4\u003e\u003cp\u003eThe DV8 MCFSNSR-01 is a set of four replacement parking sensor bezels designed to provide a clean, factory-integrated appearance for aftermarket parking sensors installed on Ford trucks and SUVs. Cut-in aftermarket sensors often lack a finished mounting bezel, leaving exposed sensor holes that look unfinished. The DVEMCFSNSR-01 fills that gap with a precision-fit black ABS bezel sized for standard 1.1-inch sensor cutouts, delivering a polished, intentional look that blends with the factory bumper texture.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSet of 4 bezels designed to finish standard 1.1-inch aftermarket parking sensor installations\u003c\/li\u003e\n\u003cli\u003eBlack ABS construction matches factory bumper material and texture\u003c\/li\u003e\n\u003cli\u003eSnap-fit or adhesive-compatible mounting for secure panel integration\u003c\/li\u003e\n\u003cli\u003eClean, flush fit eliminates the unfinished look of bare aftermarket sensor holes\u003c\/li\u003e\n\u003cli\u003eCompatible with most round parking sensors with a 1.1-inch mounting hole requirement\u003c\/li\u003e\n\u003cli\u003eLow-profile design does not protrude beyond the bumper surface\u003c\/li\u003e\n\u003cli\u003eSuitable for use on DV8 Offroad aftermarket bumpers as well as factory Ford bumpers with sensor cutouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (MPN)\u003c\/td\u003e\n\u003ctd\u003eMCFSNSR-01 \/ DVEMCFSNSR-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Sensors\u003c\/td\u003e\n\u003ctd\u003eStandard 1.1-inch round parking sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 bezels per set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eFord trucks and SUVs with aftermarket parking sensor installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e810075650276\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e4x DV8 MCFSNSR-01 Parking Sensor Bezels (Black ABS)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eAbout DV8 Offroad\u003c\/h4\u003e\u003cp\u003eDV8 Offroad designs and manufactures bumpers, rock sliders, roof racks, and accessory components for trucks and SUVs. Their product line focuses on bolt-on compatibility with factory mounting points and clean integration with OEM body lines. Accessories like the MCFSNSR-01 bezels are engineered to complement DV8 bumper systems while remaining compatible with standard aftermarket sensor hardware.\u003c\/p\u003e\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\u003cstrong\u003eWhat sensor size do the DV8 MCFSNSR-01 bezels fit?\u003c\/strong\u003e\u003cp\u003eThe MCFSNSR-01 bezels are designed for standard round parking sensors with a 1.1-inch mounting hole diameter. Confirm your sensor's outer diameter before ordering, as parking sensors are available in multiple sizes and not all sensors will seat correctly in a 1.1-inch bezel.\u003c\/p\u003e\u003cstrong\u003eDo these bezels work with sensors other than DV8 brand sensors?\u003c\/strong\u003e\u003cp\u003eYes. The DVEMCFSNSR-01 bezels are sized to the standard 1.1-inch parking sensor cutout used by many aftermarket sensor brands. As long as your sensor fits a 1.1-inch hole, the bezels should provide a compatible mount and finished appearance.\u003c\/p\u003e\u003cstrong\u003eAre the DV8 parking sensor bezels universal or Ford-specific?\u003c\/strong\u003e\u003cp\u003eThe bezels are designed with Ford trucks and SUVs as the primary application, particularly for use with DV8 aftermarket bumpers. However, since they are sized to a standard 1.1-inch sensor cutout, they can be used on any bumper that accepts sensors of that dimension, regardless of vehicle make.\u003c\/p\u003e\u003cstrong\u003eHow do the MCFSNSR-01 bezels mount into the bumper?\u003c\/strong\u003e\u003cp\u003eThe bezels are designed for snap-fit or adhesive-compatible installation into the sensor cutout hole. Installation method may vary based on bumper material and sensor housing design. Confirm the mounting method is appropriate for your specific bumper before installation.\u003c\/p\u003e\u003cstrong\u003eDo I need any special tools to install the DVEMCFSNSR-01 bezels?\u003c\/strong\u003e\u003cp\u003eNo special tools are typically required. The bezels snap or press into the sensor cutout and can usually be installed by hand. A trim removal tool may be helpful if working in tight bumper locations or when removing existing bezels.\u003c\/p\u003e\u003cstrong\u003eWill the DV8 MCFSNSR-01 bezels affect my parking sensor readings or range?\u003c\/strong\u003e\u003cp\u003eProperly installed bezels that sit flush with the bumper surface should not interfere with sensor operation. Ensure the bezel does not protrude in front of the sensor face or obstruct the sensor's detection cone when fitting.\u003c\/p\u003e\u003cstrong\u003eAre these bezels paintable to match a custom bumper color?\u003c\/strong\u003e\u003cp\u003eThe DVEMCFSNSR-01 bezels are ABS plastic, which accepts automotive-grade adhesion promoter and paint. For painted finishes, lightly scuff the bezel surface, apply adhesion promoter, and use a flexible bumper paint rated for ABS substrates.\u003c\/p\u003e\u003cstrong\u003eCan I use the MCFSNSR-01 on a non-DV8 aftermarket bumper?\u003c\/strong\u003e\u003cp\u003eYes. The bezels are compatible with any bumper that accepts a 1.1-inch sensor cutout. They are not exclusive to DV8 bumpers and can be used on any steel or ABS aftermarket bumper with correctly sized sensor holes.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eConfirm the sensor holes in your bumper are cut to the correct 1.1-inch diameter before installing the bezels.\u003c\/li\u003e\n\u003cli\u003eClean the area around each sensor hole to remove dirt, grease, or debris that could prevent a flush fit.\u003c\/li\u003e\n\u003cli\u003eInsert each DV8 MCFSNSR-01 bezel into the sensor hole from the front of the bumper, aligning the bezel tabs or retaining features with the hole edge.\u003c\/li\u003e\n\u003cli\u003ePress the bezel firmly until it seats flush and snaps into position, or apply a compatible adhesive to the back flange if your bumper material requires it.\u003c\/li\u003e\n\u003cli\u003eInsert the parking sensor into the bezel from the front, pressing until the sensor is fully seated in the housing.\u003c\/li\u003e\n\u003cli\u003eConnect the sensor wiring harness and confirm sensor operation with a test cycle before final assembly.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":46024139636815,"sku":"DVEMCFSNSR-01","price":17.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/dv8-ford-parking-sensor-bezels-set-of-4.png?v=1783521989","url":"https:\/\/www.blackopsautoworks.com\/products\/dv8-mcfsnsr-01-ford-parking-sensor-bezels-set-of-4","provider":"Black Ops Auto Works","version":"1.0","type":"link"}