{"product_id":"dv8-rrtf3-02-spec-series-roof-rack-2025-2026-toyota-4runner","title":"DV8 Offroad 25-26 Toyota 4Runner Spec Series Roof Rack","description":"\u003ch4\u003eLow-Profile Overland Roof Rack Built for the 6th Generation Toyota 4Runner with Full T-Slot Mounting Flexibility\u003c\/h4\u003e\n\u003cp\u003eThe DV8 Offroad DVERRTF3-02 is the Spec Series Roof Rack engineered specifically for the 2025-2026 Toyota 4Runner. This full-length aluminum roof rack features ten 80\/20 T-slot crossbars using M6 T-nuts, delivering nearly unlimited mounting configurations for tie-downs, gear boxes, storage systems, and accessories. The DVERRTF3-02 rides at an ultra-low profile that works with sunroof-equipped 4Runner models without modification, and uses steel mounting feet that distribute roof loads evenly across the vehicle mounting points. Side slots run the full length of the sidewalls for scene lighting, awnings, and recovery equipment, while the rear crossmember accommodates up to a 40-inch light bar. The angular wind deflector is engineered to follow the 4Runner roofline and outperform competitor rounded deflectors for reduced wind noise. The optional Light Cutout Front Fairing (RRTF3-02L, sold separately) further expands forward lighting capabilities.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDVERRTF3-02 aluminum Spec Series Roof Rack designed for the 2025-2026 Toyota 4Runner with an ultra-low-profile fit that clears sunroof-equipped models\u003c\/li\u003e\n\u003cli\u003eTen 80\/20 T-slot crossbars using M6 T-nuts for virtually unlimited tie-down, gear, and accessory mounting configurations\u003c\/li\u003e\n\u003cli\u003eM6 slots along the top and rear for additional mounting points and tie-down applications\u003c\/li\u003e\n\u003cli\u003eFull-length side slots along both sidewalls for scene lights, awnings, and recovery tools\u003c\/li\u003e\n\u003cli\u003eRear crossmember supports up to a 40-inch light bar for camp setup and trail reversing illumination\u003c\/li\u003e\n\u003cli\u003eRemovable rear styling fins for flush mounting of awnings and large rooftop tents\u003c\/li\u003e\n\u003cli\u003eAngular wind deflector matched to the 4Runner roofline for lower wind noise vs competitor rounded designs\u003c\/li\u003e\n\u003cli\u003e90-degree sidewall bend adds structural rigidity and integrates mounting slots along the full rack length\u003c\/li\u003e\n\u003cli\u003eSteel mounting feet distribute weight evenly across roof mounting points for tent, storage box, and heavy gear applications\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum side plates, crossbars, and rear structure with gloss black steel accent plate\u003c\/li\u003e\n\u003cli\u003eMicro-Texture Black Powder Coat finish with Gloss Black accents\u003c\/li\u003e\n\u003cli\u003eBolt-on installation, no cutting required. Compatible with optional Light Cutout Front Fairing (RRTF3-02L, sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025-2026\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e4Runner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (MPN)\u003c\/td\u003e\n\u003ctd\u003eRRTF3-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eDVERRTF3-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e810087816636\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDV8 Offroad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum (side plates, crossbars, rear structure); Steel (mounting feet, accent panels)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMicro-Texture Black Powder Coat; Gloss Black accents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrossbars\u003c\/td\u003e\n\u003ctd\u003e10 x 80\/20 T-slot (M6 T-nut compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Rear Light Bar\u003c\/td\u003e\n\u003ctd\u003e40 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e86 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-on, no cutting required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstall Time\u003c\/td\u003e\n\u003ctd\u003eApproximately 4 to 6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSunroof Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Accessory\u003c\/td\u003e\n\u003ctd\u003eLight Cutout Front Fairing (RRTF3-02L, sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProp 65\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne (1) DVERRTF3-02 Spec Series Roof Rack assembly\u003c\/li\u003e\n\u003cli\u003eTen (10) 80\/20 T-slot crossbars\u003c\/li\u003e\n\u003cli\u003eSteel mounting feet\u003c\/li\u003e\n\u003cli\u003eRemovable rear styling fins\u003c\/li\u003e\n\u003cli\u003eAngular wind deflector\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eAbout DV8 Offroad\u003c\/h4\u003e\n\u003cp\u003eDV8 Offroad is a Utah-based off-road and overland accessories manufacturer focused on Jeep, Ford Bronco, and Toyota platforms. Known for engineering-driven product development and in-house testing, DV8 produces bumpers, roof racks, skid plates, fender flares, and lighting that are designed for direct OEM fitment with no cutting or welding required. The Spec Series Roof Rack lineup is developed with overland enthusiasts who prioritize low-profile aesthetics and maximum configurability without sacrificing structural load capacity.\u003c\/p\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the DV8 DVERRTF3-02?\u003c\/strong\u003e\u003cp\u003eThe DVERRTF3-02 is the DV8 Offroad Spec Series Roof Rack for the 2025 and 2026 Toyota 4Runner. It is a full-length aluminum roof rack with ten 80\/20 T-slot crossbars, full-length side slots, a rear light bar mounting position, removable styling fins, and an angular wind deflector. Bolt-on installation with no cutting required. Approximately 86 lbs and compatible with sunroof-equipped 4Runner models.\u003c\/p\u003e\n\u003cstrong\u003eDoes the DVERRTF3-02 fit 4Runner models with a sunroof?\u003c\/strong\u003e\u003cp\u003eYes. The DVERRTF3-02 uses an ultra-low-profile design that clears the sunroof opening on equipped 4Runner models without modification or relocation of the sunroof mechanism.\u003c\/p\u003e\n\u003cstrong\u003eWhat crossbar system does the DVERRTF3-02 use?\u003c\/strong\u003e\u003cp\u003eThe DVERRTF3-02 uses ten 80\/20 profile T-slot crossbars that accept standard M6 T-nuts. This system allows mounting of aftermarket tie-downs, cargo accessories, lighting brackets, and gear organizers from nearly any manufacturer that supports M6 T-nut mounting.\u003c\/p\u003e\n\u003cstrong\u003eCan I mount a rooftop tent on the DVERRTF3-02?\u003c\/strong\u003e\u003cp\u003eYes. The DVERRTF3-02 uses steel mounting feet that distribute load evenly across the 4Runner roof mounting points and is designed to support rooftop tents, storage boxes, and heavy overland gear. Always verify your specific rooftop tent mounting dimensions against the rack crossbar spacing and confirm your vehicle's roof load capacity per the owners manual before loading.\u003c\/p\u003e\n\u003cstrong\u003eWhat size light bar can I mount on the rear crossmember of the DVERRTF3-02?\u003c\/strong\u003e\u003cp\u003eThe rear crossmember of the DVERRTF3-02 includes integrated mounting slots that accept a light bar up to 40 inches wide, providing illumination for camp setups or reversing on the trail.\u003c\/p\u003e\n\u003cstrong\u003eIs the optional Light Cutout Front Fairing included with the DVERRTF3-02?\u003c\/strong\u003e\u003cp\u003eNo. The Light Cutout Front Fairing (MPN RRTF3-02L) is sold separately and is compatible exclusively with the DVERRTF3-02 Spec Series Roof Rack. The fairing supports a 40-inch straight light bar, dual 20-inch single-row bars, or up to ten 3-inch pod lights.\u003c\/p\u003e\n\u003cstrong\u003eHow long does it take to install the DVERRTF3-02?\u003c\/strong\u003e\u003cp\u003eDV8 estimates approximately 4 to 6 hours total for the DVERRTF3-02, broken into roughly 3 hours of rack assembly and 1 to 3 hours for vehicle installation. Install time varies based on experience level and whether optional accessories are being added simultaneously.\u003c\/p\u003e\n\u003cstrong\u003eWhat finish does the DVERRTF3-02 use?\u003c\/strong\u003e\u003cp\u003eThe aluminum structural components of the DVERRTF3-02 are finished in Micro-Texture Black Powder Coat. The steel mounting feet and accent panels use a Gloss Black finish. Both finishes are designed for durability in off-road and overland environments.\u003c\/p\u003e\n\u003cstrong\u003eDoes the DVERRTF3-02 require drilling or cutting the 4Runner body?\u003c\/strong\u003e\u003cp\u003eNo. The DVERRTF3-02 is a bolt-on installation that uses the factory roof mounting locations on the 2025-2026 Toyota 4Runner. No cutting, drilling, or permanent modification to the body is required.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eLay out all DVERRTF3-02 components and hardware and verify against the included parts list before beginning\u003c\/li\u003e\n\u003cli\u003eAssemble the rack frame on the ground per the DV8 installation guide, connecting the crossbars to the side plates and rear structure\u003c\/li\u003e\n\u003cli\u003eInstall M6 T-nuts into the crossbar slots at planned mounting positions for accessories before raising the rack to the roof\u003c\/li\u003e\n\u003cli\u003eWith a second person, carefully raise the assembled DVERRTF3-02 to the 4Runner roofline and align the steel mounting feet with the factory roof mounting points\u003c\/li\u003e\n\u003cli\u003eThread the factory-style mounting bolts through the steel feet and into the roof mounting locations and hand-tighten\u003c\/li\u003e\n\u003cli\u003eOnce all mounting feet are seated, torque all bolts to spec per the DV8 installation guide\u003c\/li\u003e\n\u003cli\u003eAttach the angular wind deflector to the front of the rack assembly and secure per the installation guide\u003c\/li\u003e\n\u003cli\u003eInstall removable rear styling fins if desired, or leave removed for flush awning or tent mounting\u003c\/li\u003e\n\u003cli\u003eMount any accessories using the M6 T-nut system in the crossbars and sidewall slots\u003c\/li\u003e\n\u003cli\u003eIf adding the optional RRTF3-02L Light Cutout Front Fairing, follow the fairing installation guide for that accessory\u003c\/li\u003e\n\u003cli\u003eInspect all fasteners and confirm secure before loading gear or driving\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":46042391085135,"sku":"DVERRTF3-02","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/dv8-offroad-25-26-toyota-4runner-spec-series-roof-rack-dv8-offroad.jpg?v=1783976433","url":"https:\/\/www.blackopsautoworks.com\/products\/dv8-rrtf3-02-spec-series-roof-rack-2025-2026-toyota-4runner","provider":"Black Ops Auto Works","version":"1.0","type":"link"}