{"product_id":"edelbrock-ford-289-302-e-series-head-bolt-kit-7-16in-bolts","title":"Edelbrock E-Series Head Bolt Kit for Ford 289\/302 Engines","description":"\u003ch4\u003eSecure supported Ford 289\/302 aluminum heads with application-specific chromoly hardware\u003c\/h4\u003e\u003cp\u003eEdelbrock 85522 is an E-Series cylinder-head fastener set for 1963-1996 Ford 289 and 302 small-block engines with standard 7\/16-inch head-bolt bosses and the listed Edelbrock aluminum cylinder heads. The kit uses heat-treated chromoly bolts, rolled threads, small hex heads, step washers, and a sealed black-oxide finish.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesigned for Ford 289 and 302 small-block engines with 7\/16-inch head-bolt bosses\u003c\/li\u003e\n\u003cli\u003eSupports the exact Edelbrock aluminum cylinder-head part numbers listed below\u003c\/li\u003e\n\u003cli\u003eChromoly construction with 190,000 PSI yield tensile strength\u003c\/li\u003e\n\u003cli\u003eThreads are rolled after heat treatment for improved form and strength\u003c\/li\u003e\n\u003cli\u003eSmall hex heads provide socket clearance in tight installations\u003c\/li\u003e\n\u003cli\u003eBlack-oxide finish with sealer and stamped Edelbrock E logo\u003c\/li\u003e\n\u003cli\u003eStep washers adapt the 7\/16-inch bolts to 1\/2-inch holes in supported aluminum heads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eApplication details and restrictions\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears \/ Scope\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel \/ Component\u003c\/th\u003e\n\u003cth\u003eRequirement\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1963-1996 engine family\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003e289 \/ 302 small-block V8\u003c\/td\u003e\n\u003ctd\u003eStandard 7\/16-inch head-bolt bosses and a supported Edelbrock aluminum cylinder head\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eEdelbrock lists cylinder heads 60217, 60219, 60225, 60229, 60249, 60255, 60259, 60319, 60329, 60349, 60359, 60367, 60369, 60379, 60389, 60399, 602479, and 602579. Ford 289\/302 applications require head-bolt bushings 9680 where specified by Edelbrock. Boss 302 clone engines require Edelbrock bushings with integral washers 9680 in place of the supplied washers. Vehicle year and model alone do not establish compatibility.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd\u003e85522\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Family\u003c\/td\u003e\n\u003ctd\u003eFord 289 \/ 302 small-block V8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Diameter\u003c\/td\u003e\n\u003ctd\u003e7\/16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003e7\/16-14 coarse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBolt Lengths\u003c\/td\u003e\n\u003ctd\u003eTen 2.50-inch bolts and ten 4.00-inch bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWashers\u003c\/td\u003e\n\u003ctd\u003eTwenty step washers, 1\/2-inch ID x 7\/8-inch OD x 0.120-inch thick\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eChromoly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYield Tensile Strength\u003c\/td\u003e\n\u003ctd\u003e190,000 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack oxide with sealer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalifornia Proposition 65\u003c\/td\u003e\n\u003ctd\u003eWarning for chromium exposure applies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTen 7\/16-14 x 2.50-inch E-Series head bolts\u003c\/li\u003e\n\u003cli\u003eTen 7\/16-14 x 4.00-inch E-Series head bolts\u003c\/li\u003e\n\u003cli\u003eTwenty 1\/2-inch ID x 7\/8-inch OD x 0.120-inch step washers\u003c\/li\u003e\n\u003cli\u003eEdelbrock head-bolt installation instructions\u003c\/li\u003e\n\u003cli\u003eEdelbrock 9680 head-bolt bushings are required where specified and are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout Edelbrock\u003c\/h4\u003e\u003cp\u003eEdelbrock engineers cylinder heads and installation hardware as matched engine systems. This E-Series kit is built around the thread size, head-bolt-hole diameter, torque procedure, and supported Ford small-block cylinder-head combinations listed by Edelbrock.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eNo related store product is linked because supporting components must be verified for the exact vehicle, engine, transmission, and current Edelbrock configuration.\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the 85522?\u003c\/strong\u003e\u003cp\u003eIt is cylinder head bolt kit for the exact application and restrictions shown above.\u003c\/p\u003e\u003cstrong\u003eWhich engines are supported?\u003c\/strong\u003e\u003cp\u003eEdelbrock specifies Ford 289 and 302 small-block V8 engines with standard 7\/16-inch head-bolt bosses.\u003c\/p\u003e\u003cstrong\u003eAre these bolts for every Ford small-block?\u003c\/strong\u003e\u003cp\u003eNo. The kit is not the 1\/2-inch 351W fastener set and requires the supported block and cylinder-head combination.\u003c\/p\u003e\u003cstrong\u003eWhich cylinder heads are supported?\u003c\/strong\u003e\u003cp\u003eUse only the Edelbrock aluminum cylinder-head part numbers listed in the application section and confirm the current cylinder-head instructions.\u003c\/p\u003e\u003cstrong\u003eAre head-bolt bushings included?\u003c\/strong\u003e\u003cp\u003eNo. Edelbrock 9680 bushings are required where specified and must be obtained separately.\u003c\/p\u003e\u003cstrong\u003eWhat torque does Edelbrock specify?\u003c\/strong\u003e\u003cp\u003eEdelbrock specifies 65 to 70 lb-ft for 7\/16-inch bolts, applied in four steps and in the factory tightening sequence.\u003c\/p\u003e\u003cstrong\u003eShould the bolts be lubricated?\u003c\/strong\u003e\u003cp\u003eYes. Edelbrock instructs installers to apply oil or suitable thread lubricant to the threads and beneath bolt heads and washers.\u003c\/p\u003e\u003cstrong\u003eIs a re-torque required?\u003c\/strong\u003e\u003cp\u003eEdelbrock recommends re-torquing after initial startup and a two-to-three-hour cool-down.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eConfirm the engine is a Ford 289 or 302 small-block with 7\/16-inch head-bolt bosses and that the exact Edelbrock cylinder-head number is listed for this kit.\u003c\/li\u003e\n\u003cli\u003eRead the current Edelbrock cylinder-head and bolt-kit instructions, clean and inspect the block threads, and obtain Edelbrock 9680 bushings when the application requires them.\u003c\/li\u003e\n\u003cli\u003eInstall the supported cylinder heads and supplied step washers in the locations shown by Edelbrock; Boss 302 clone engines use 9680 integral-washer bushings instead of the supplied washers.\u003c\/li\u003e\n\u003cli\u003eApply oil or suitable thread lubricant to every bolt thread and beneath each bolt head and washer as directed by Edelbrock.\u003c\/li\u003e\n\u003cli\u003eFollow the factory tightening sequence and bring the 7\/16-inch bolts to 65 to 70 lb-ft in four steps: 30, 40, 50, then 65 to 70 lb-ft.\u003c\/li\u003e\n\u003cli\u003eComplete the remaining cylinder-head installation according to Edelbrock and Ford service procedures, checking that every washer seats flat and no bolt bottoms in its hole.\u003c\/li\u003e\n\u003cli\u003eAfter initial startup, allow the engine to cool for two to three hours and re-torque the fasteners as recommended by Edelbrock.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":68164586209359,"sku":"EDE85522","price":77.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/edelbrock-85522-cylinder-head-bolt-kit-01.webp?v=1794664571","url":"https:\/\/www.blackopsautoworks.com\/products\/edelbrock-ford-289-302-e-series-head-bolt-kit-7-16in-bolts","provider":"Black Ops Auto Works","version":"1.0","type":"link"}