{"product_id":"h-r-50317-sport-springs-2007-2011-audi-s6-sedan","title":"H\u0026R 07-11 Audi S6 Sport Spring (Non Wagon)","description":"\u003ch4\u003eDrop Your 2007-2011 Audi S6 C6 1.3 Inches Up Front and 1.1 Inches in the Rear Without Sacrificing Daily Drivability\u003c\/h4\u003e\n\u003cp\u003eThe H\u0026amp;R 50317 Sport Springs are engineered specifically for the 2007-2011 Audi S6 C6 sedan and use a progressive spring rate design that provides a firm, responsive feel at the limit while remaining compliant enough for daily driving over imperfect roads. By lowering the front by approximately 1.3 inches and the rear by approximately 1.1 inches, the HRS50317 closes the fender-to-tire gap, lowers the center of gravity, and reduces body roll through corners without requiring a full coilover conversion. These springs drop directly onto the factory Audi dampers and require no modification to the suspension geometry.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProgressive spring rate design provides compliant daily ride quality with reduced body roll under spirited driving\u003c\/li\u003e\n\u003cli\u003eApproximately 1.3-inch front and 1.1-inch rear drop lowers center of gravity and reduces fender gap\u003c\/li\u003e\n\u003cli\u003eDirect OEM-fit replacement that works with factory Audi S6 C6 dampers; no modification required\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the Audi S6 C6 Sedan platform; not a universal spring kit\u003c\/li\u003e\n\u003cli\u003eLower center of gravity reduces understeer and improves cornering confidence\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R progressive rate technology maintains spring travel and prevents coil bind at full drop\u003c\/li\u003e\n\u003cli\u003eDesigned and tested to comply with TUV standards for street-legal use in Europe and the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2011\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS6\u003c\/td\u003e\n\u003ctd\u003eSedan (C6, Non Wagon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e50317\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Type\u003c\/td\u003e\n\u003ctd\u003eSport (progressive rate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Lowering\u003c\/td\u003e\n\u003ctd\u003eApproximately 1.3 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Lowering\u003c\/td\u003e\n\u003ctd\u003eApproximately 1.1 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDamper Compatibility\u003c\/td\u003e\n\u003ctd\u003eOEM Audi S6 C6 factory dampers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003e2007-2011 Audi S6 C6 Sedan (Non Wagon)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Rate Design\u003c\/td\u003e\n\u003ctd\u003eProgressive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e4 springs (complete set)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e846507010867\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e4x H\u0026amp;R 50317 progressive rate sport springs (front pair and rear pair)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eAbout H\u0026amp;R Springs\u003c\/h4\u003e\n\u003cp\u003eH\u0026amp;R Special Springs is a German manufacturer with decades of experience engineering suspension components for performance vehicles. Every H\u0026amp;R spring kit is designed and tested for a specific vehicle application, not adapted from a universal rate, ensuring the lowering amount and spring rate are optimized for the OEM suspension geometry. H\u0026amp;R Sport Springs are the company's best-selling product and are used worldwide by enthusiasts who want a meaningful improvement in handling and appearance without the cost of a full coilover system.\u003c\/p\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the H\u0026amp;R 50317?\u003c\/strong\u003e\n\u003cp\u003eThe H\u0026amp;R 50317 is a set of four progressive-rate sport springs designed specifically for the 2007-2011 Audi S6 C6 Sedan. They lower the front approximately 1.3 inches and the rear approximately 1.1 inches, reduce body roll, and install directly onto the factory Audi S6 dampers without modification.\u003c\/p\u003e\n\n\u003cstrong\u003eDo the HRS50317 springs work with the factory Audi S6 C6 dampers?\u003c\/strong\u003e\n\u003cp\u003eYes. The 50317 is engineered to work with the factory Audi S6 C6 shock absorbers. No modification to the dampers, strut mounts, or suspension geometry is required. For best performance and longevity, H\u0026amp;R recommends replacing worn factory dampers at the same time as the springs if they have high mileage.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes the H\u0026amp;R 50317 fit the Audi S6 Avant wagon?\u003c\/strong\u003e\n\u003cp\u003eNo. The HRS50317 is specifically designed for the 2007-2011 Audi S6 C6 Sedan (non-wagon). The S6 Avant has different spring rates and mounting geometry. A separate H\u0026amp;R part number is required for the Avant.\u003c\/p\u003e\n\n\u003cstrong\u003eHow much does the H\u0026amp;R 50317 lower the Audi S6?\u003c\/strong\u003e\n\u003cp\u003eThe 50317 lowers the front of the Audi S6 C6 by approximately 1.3 inches and the rear by approximately 1.1 inches. Actual lowering may vary slightly depending on vehicle trim level, original spring condition, and whether the vehicle has optional adaptive suspension equipment.\u003c\/p\u003e\n\n\u003cstrong\u003eWill the H\u0026amp;R 50317 affect ride quality on the Audi S6 C6?\u003c\/strong\u003e\n\u003cp\u003eH\u0026amp;R Sport Springs use a progressive spring rate that provides a firm, engaged feel at the limit while remaining compliant for everyday street driving. Most users report a noticeably tighter, flatter cornering experience with an acceptable increase in firmness over stock. The springs are not designed for track-only use and maintain full bump travel to avoid coil bind.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes the Audi S6 C6 need an alignment after installing H\u0026amp;R 50317 springs?\u003c\/strong\u003e\n\u003cp\u003eYes. Any change to ride height on a vehicle affects the wheel alignment angles. A four-wheel alignment is strongly recommended after installing the H\u0026amp;R 50317 to bring camber, toe, and caster back into specification and prevent uneven tire wear.\u003c\/p\u003e\n\n\u003cstrong\u003eAre the H\u0026amp;R 50317 springs legal for street use?\u003c\/strong\u003e\n\u003cp\u003eYes. H\u0026amp;R Sport Springs are TUV-tested and designed to comply with street use requirements in the USA and Europe. They do not require modification to any safety systems and maintain adequate suspension travel for street use.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat is the warranty on H\u0026amp;R 50317 springs?\u003c\/strong\u003e\n\u003cp\u003eH\u0026amp;R Special Springs backs their products with a limited warranty against manufacturing defects. Contact H\u0026amp;R directly at hrsprings.com or through your authorized H\u0026amp;R dealer for specific warranty terms and claims support.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSafely lift the vehicle and support it on jack stands at all four corners. Remove all four wheels.\u003c\/li\u003e\n\u003cli\u003eUsing a spring compressor, compress each factory spring before removing the strut assembly or spring perch. Never remove a spring without a compressor.\u003c\/li\u003e\n\u003cli\u003eRemove the factory spring from the strut assembly or subframe perch, noting the orientation of the spring end isolators.\u003c\/li\u003e\n\u003cli\u003eTransfer the factory spring seat isolators, bump stops, and dust boots to the new H\u0026amp;R 50317 spring set.\u003c\/li\u003e\n\u003cli\u003eInstall the H\u0026amp;R 50317 springs onto the strut assembly or spring perch with the spring ends properly seated in the lower and upper perch grooves.\u003c\/li\u003e\n\u003cli\u003eReinstall the strut assembly or perch hardware to factory torque specifications.\u003c\/li\u003e\n\u003cli\u003eReinstall all four wheels and torque lug bolts to factory specification.\u003c\/li\u003e\n\u003cli\u003eLower the vehicle and perform a bounce test at each corner to confirm proper seating.\u003c\/li\u003e\n\u003cli\u003eSchedule a four-wheel alignment as soon as possible after installation to restore proper suspension geometry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":46053827477583,"sku":"HRS50317","price":424.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/H_R_Sport_Springs_2007-2011_Audi_S6_C6_AWD_V10_Sedan.png?v=1784057686","url":"https:\/\/www.blackopsautoworks.com\/products\/h-r-50317-sport-springs-2007-2011-audi-s6-sedan","provider":"Black Ops Auto Works","version":"1.0","type":"link"}