{"product_id":"hr-hrs29049-1-mazda-mazda2-sport-spring-2010-2014","title":"H\u0026R 10-14 Mazda Mazda2 Sport Spring","description":"\u003ch4\u003eGerman-Engineered Sport Springs That Transform the Mazda2's Handling and Stance\u003c\/h4\u003e\n\u003cp\u003eThe H\u0026amp;R HRS29049-1 Sport Springs are precision-engineered lowering springs designed specifically for the 2010-2014 Mazda Mazda2. H\u0026amp;R's engineers developed the HRS29049-1 to drop the Mazda2 approximately 1.5 inches at the front and 1.3 inches at the rear, tightening the suspension geometry and significantly reducing body roll during cornering. The result is a more planted, confident driving experience that suits the Mazda2's naturally agile character. The progressive spring rate delivers firm cornering resistance without sacrificing the compliance needed for daily driving. These springs are a direct bolt-in replacement for the OEM coils, fully compatible with the factory shock absorbers, and manufactured from high-tensile German spring steel with a corrosion-resistant finish.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLowers the Mazda2 approximately 1.5 inches front and 1.3 inches rear\u003c\/li\u003e\n\u003cli\u003eProgressive spring rate balances sport handling with daily ride quality\u003c\/li\u003e\n\u003cli\u003eCompatible with factory OEM shock absorbers, no strut replacement needed\u003c\/li\u003e\n\u003cli\u003eHigh-tensile German spring steel with corrosion-resistant coating\u003c\/li\u003e\n\u003cli\u003eTUV and ABE certified for European road-legal engineering compliance\u003c\/li\u003e\n\u003cli\u003eH\u0026amp;R limited warranty coverage\u003c\/li\u003e\n\u003cli\u003eBolt-in OEM replacement, no modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eMazda\u003c\/td\u003e\n\u003ctd\u003eMazda2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eHRS29049-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eHRS29049-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003e2010-2014 Mazda Mazda2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Drop\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.5 inches (38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Drop\u003c\/td\u003e\n\u003ctd\u003eApprox. 1.3 inches (33 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring Type\u003c\/td\u003e\n\u003ctd\u003eProgressive Rate Sport Spring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-Tensile German Spring Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eTUV \/ ABE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOEM Shock Compatible\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSet of 4 (complete vehicle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eH\u0026amp;R Springs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e4x H\u0026amp;R HRS29049-1 sport lowering springs (complete set, all four corners)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout H\u0026amp;R Springs\u003c\/h4\u003e\n\u003cp\u003eH\u0026amp;R Springs is a German suspension manufacturer with over 40 years of experience producing OEM and performance suspension components. H\u0026amp;R coil springs are engineered and manufactured in Germany using proprietary spring steel alloys and progressive winding technology. Every H\u0026amp;R product is TUV-certified and meets or exceeds OEM engineering standards. H\u0026amp;R is a trusted brand for compact and sport vehicle owners seeking proven suspension upgrades backed by rigorous European engineering documentation.\u003c\/p\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat years and models does the H\u0026amp;R HRS29049-1 fit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HRS29049-1 fits the 2010-2014 Mazda Mazda2 (all trims). Always verify your specific trim and configuration before ordering, as regional variants may differ.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much does the HRS29049-1 lower the Mazda2?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe HRS29049-1 lowers the Mazda2 approximately 1.5 inches (38 mm) at the front and 1.3 inches (33 mm) at the rear, providing a slight forward rake for a sporty stance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the HRS29049-1 with my factory Mazda2 shocks?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The HRS29049-1 is fully compatible with the factory OEM shock absorbers on the 2010-2014 Mazda2. No shock upgrade is required for installation, though pairing with performance shocks will optimize handling further.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs an alignment required after installing the HRS29049-1?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. A four-wheel alignment is strongly recommended any time ride height is changed. Installing lowering springs without realigning the suspension will result in uneven and accelerated tire wear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the HRS29049-1 cause my Mazda2 to bottom out on bumps?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 1.5 inch front and 1.3 inch rear drop of the HRS29049-1 is a moderate lowering that maintains adequate suspension travel for normal road use. Extremely rough roads, large speed bumps, or heavy loading may increase the likelihood of bottoming, as with any lowered vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes H\u0026amp;R certify these springs for road use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. H\u0026amp;R springs carry TUV certification and ABE approval, confirming they meet German road-legal engineering standards. This reflects H\u0026amp;R's commitment to engineering quality and safety in suspension modifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the HRS29049-1 springs available outside of Europe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. H\u0026amp;R distributes their springs globally, including in North America. The HRS29049-1 is sold through authorized H\u0026amp;R distributors worldwide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is H\u0026amp;R's warranty on these springs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eH\u0026amp;R provides a limited warranty on the HRS29049-1 covering manufacturing defects. Contact H\u0026amp;R or an authorized distributor for specific warranty terms and the claims process.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSafely lift and support the vehicle on jack stands. Remove all four wheels.\u003c\/li\u003e\n\u003cli\u003eSupport the lower control arm or suspension with a floor jack before removing spring tension.\u003c\/li\u003e\n\u003cli\u003eUsing a spring compressor tool, compress the coil spring, then remove the strut top nut to separate and extract the factory coil spring.\u003c\/li\u003e\n\u003cli\u003eTransfer factory spring seats, bump stops, and insulators to the H\u0026amp;R spring as applicable.\u003c\/li\u003e\n\u003cli\u003eInstall the H\u0026amp;R HRS29049-1 spring in the correct orientation, confirming it seats properly in both the upper and lower spring perches.\u003c\/li\u003e\n\u003cli\u003eReassemble the strut and torque all fasteners to the factory specification.\u003c\/li\u003e\n\u003cli\u003eRepeat for all four corners. Reinstall wheels and torque to specification.\u003c\/li\u003e\n\u003cli\u003eLower the vehicle and bounce each corner several times to settle the suspension before measuring final ride height.\u003c\/li\u003e\n\u003cli\u003eSchedule a four-wheel alignment immediately after installation.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":46033864818767,"sku":"HRS29049-1","price":193.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/hr-hrs29049-1-sport-lowering-springs-mazda-mazda2.png?v=1783624132","url":"https:\/\/www.blackopsautoworks.com\/products\/hr-hrs29049-1-mazda-mazda2-sport-spring-2010-2014","provider":"Black Ops Auto Works","version":"1.0","type":"link"}