{"product_id":"hr-hrs3014580-trak-plus-dr-15mm-wheel-spacers-4x98-58mm","title":"H\u0026R HRS3014580 TRAK+ DR 15mm Wheel Spacers 4x98 Bolt Pattern 58mm Centerbore","description":"\u003cp\u003eThe \u003cstrong\u003eH\u0026amp;R HRS3014580\u003c\/strong\u003e is a pair of TRAK+ DR Series 15mm wheel spacers for vehicles with a 4x98 bolt pattern and 58mm centerbore. Each spacer moves the wheel out 15mm per side, widening the track by 30mm per axle. Compatible vehicles include the Alfa Romeo 145, 146, 155, 164, MiTo, Fiat 500, Fiat Grande Punto, Fiat Panda, Fiat Bravo, Fiat Stilo, Fiat Linea, Abarth 500, Abarth 595, Abarth 695, and Ford KA. The \u003cstrong\u003eHRS3014580\u003c\/strong\u003e is a DR system spacer, which means it fits between the wheel and hub using your existing bolt holes. Longer wheel bolts are required and must be ordered separately. Not compatible with steel rims. Made in Germany with TUV certification.\u003c\/p\u003e\n\u003ch4\u003eWhat Is Included with HRS3014580\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2x H\u0026amp;R TRAK+ DR 15mm wheel spacers (one pair, covers one axle)\u003c\/li\u003e\n\u003cli\u003eTUV certificate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Longer wheel bolts are NOT included and must be ordered separately. This is a DR system spacer. See installation notes below for bolt length guidance.\u003c\/p\u003e\n\u003ch4\u003eH\u0026amp;R DR Series Explained\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eHRS3014580\u003c\/strong\u003e uses H\u0026amp;R's DR Series mounting system. The spacer sits between the wheel and the axle hub, using your factory bolt holes. Because the spacer adds 15mm of thickness between the hub and wheel, your original wheel bolts will no longer be long enough. You must order longer bolts before installation. New bolts must be longer than the originals by the width of the spacer so if your stock bolts are 27mm, you need 42mm bolts. Always confirm the correct bolt seat type (taper or ball\/radius) for your specific wheels before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhy Run 15mm Wheel Spacers\u003c\/h4\u003e\n\u003cp\u003eThe \u003cstrong\u003eH\u0026amp;R HRS3014580\u003c\/strong\u003e pushes each wheel 15mm outward from the hub, widening the total track by 30mm across an axle. The benefits are both visual and functional. Wider track fills the wheel arches so wheels sit flush with the fender rather than recessed inward. On the performance side, a wider stance lowers the center of gravity effect in cornering, improves lateral stability, and reduces body roll tendency. H\u0026amp;R engineers these spacers as hubcentric components with a full contact hub surface, so the wheel loads onto the spacer the same way it loads onto the factory hub load is distributed evenly across the entire contact face rather than carried only by the bolts.\u003c\/p\u003e\n\u003ch4\u003eConstruction and Quality\u003c\/h4\u003e\n\u003cp\u003eH\u0026amp;R manufactures the \u003cstrong\u003eHRS3014580\u003c\/strong\u003e from a proprietary aluminum\/magnesium alloy with higher tensile strength than standard 6061-T6 billet aluminum. Each spacer is CNC machined for precise dimensions, then hard anodized for corrosion resistance. The hubcentric design matches the factory hub diameter exactly at 58mm, so the spacer centers on the hub just like the wheel does. TUV certified this is not a generic universal spacer. It is engineered and approved for specific vehicle applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes for HRS3014580\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDR system: spacer fits between wheel and hub using existing bolt holes\u003c\/li\u003e\n\u003cli\u003eLonger wheel bolts required not included, order separately\u003c\/li\u003e\n\u003cli\u003eNew bolt length = original bolt length plus spacer thickness (15mm)\u003c\/li\u003e\n\u003cli\u003eMatch bolt seat type to your wheels (taper seat or ball\/radius seat)\u003c\/li\u003e\n\u003cli\u003eNot compatible with steel rims\u003c\/li\u003e\n\u003cli\u003eHub length at the car must not exceed the specification noted in the TUV certificate\u003c\/li\u003e\n\u003cli\u003eTorque bolts to factory specification and re-torque after first 50 miles\u003c\/li\u003e\n\u003cli\u003eOrder 2 pairs (4 spacers total) to cover all four corners of the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment for H\u0026amp;R HRS3014580\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eGeneration\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlfa Romeo\u003c\/td\u003e\n\u003ctd\u003e145\u003c\/td\u003e\n\u003ctd\u003eType 930\u003c\/td\u003e\n\u003ctd\u003e1994-2001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlfa Romeo\u003c\/td\u003e\n\u003ctd\u003e146\u003c\/td\u003e\n\u003ctd\u003eType 930\u003c\/td\u003e\n\u003ctd\u003e1994-2001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlfa Romeo\u003c\/td\u003e\n\u003ctd\u003e155\u003c\/td\u003e\n\u003ctd\u003eType 167\u003c\/td\u003e\n\u003ctd\u003e1992-1997\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlfa Romeo\u003c\/td\u003e\n\u003ctd\u003e164\u003c\/td\u003e\n\u003ctd\u003eType 164\u003c\/td\u003e\n\u003ctd\u003e1987-1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlfa Romeo\u003c\/td\u003e\n\u003ctd\u003eMiTo\u003c\/td\u003e\n\u003ctd\u003eType 955\u003c\/td\u003e\n\u003ctd\u003e2008-2018\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbarth\u003c\/td\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003ctd\u003eType 312\u003c\/td\u003e\n\u003ctd\u003e2008-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbarth\u003c\/td\u003e\n\u003ctd\u003e500C\u003c\/td\u003e\n\u003ctd\u003eType 312\u003c\/td\u003e\n\u003ctd\u003e2010-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbarth\u003c\/td\u003e\n\u003ctd\u003e595\u003c\/td\u003e\n\u003ctd\u003eType 312\u003c\/td\u003e\n\u003ctd\u003e2011-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbarth\u003c\/td\u003e\n\u003ctd\u003e595C\u003c\/td\u003e\n\u003ctd\u003eType 312\u003c\/td\u003e\n\u003ctd\u003e2012-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbarth\u003c\/td\u003e\n\u003ctd\u003e695\u003c\/td\u003e\n\u003ctd\u003eType 312\u003c\/td\u003e\n\u003ctd\u003e2012-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAbarth\u003c\/td\u003e\n\u003ctd\u003e695C\u003c\/td\u003e\n\u003ctd\u003eType 312\u003c\/td\u003e\n\u003ctd\u003e2013-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiat\u003c\/td\u003e\n\u003ctd\u003e500\u003c\/td\u003e\n\u003ctd\u003eType 312\u003c\/td\u003e\n\u003ctd\u003e2007-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiat\u003c\/td\u003e\n\u003ctd\u003e500C\u003c\/td\u003e\n\u003ctd\u003eType 312\u003c\/td\u003e\n\u003ctd\u003e2007-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiat\u003c\/td\u003e\n\u003ctd\u003eBravo\u003c\/td\u003e\n\u003ctd\u003eType 198\u003c\/td\u003e\n\u003ctd\u003e2007-2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiat\u003c\/td\u003e\n\u003ctd\u003eGrande Punto \/ Punto\u003c\/td\u003e\n\u003ctd\u003eType 199\u003c\/td\u003e\n\u003ctd\u003e2005-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiat\u003c\/td\u003e\n\u003ctd\u003eLinea\u003c\/td\u003e\n\u003ctd\u003eType 323\u003c\/td\u003e\n\u003ctd\u003e2007-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiat\u003c\/td\u003e\n\u003ctd\u003ePanda\u003c\/td\u003e\n\u003ctd\u003eType 169\u003c\/td\u003e\n\u003ctd\u003e2003-2012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiat\u003c\/td\u003e\n\u003ctd\u003ePanda\u003c\/td\u003e\n\u003ctd\u003eType 312\u003c\/td\u003e\n\u003ctd\u003e2012-present\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiat\u003c\/td\u003e\n\u003ctd\u003ePunto\u003c\/td\u003e\n\u003ctd\u003eType 188\u003c\/td\u003e\n\u003ctd\u003e1999-2010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiat\u003c\/td\u003e\n\u003ctd\u003eStilo\u003c\/td\u003e\n\u003ctd\u003eType 192\u003c\/td\u003e\n\u003ctd\u003e2001-2010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eKA\u003c\/td\u003e\n\u003ctd\u003eType RU8\u003c\/td\u003e\n\u003ctd\u003e2008-2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLancia\u003c\/td\u003e\n\u003ctd\u003eDelta\u003c\/td\u003e\n\u003ctd\u003eType 844\u003c\/td\u003e\n\u003ctd\u003e2008-2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLancia\u003c\/td\u003e\n\u003ctd\u003eDedra\u003c\/td\u003e\n\u003ctd\u003eType 835\u003c\/td\u003e\n\u003ctd\u003e1989-2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLancia\u003c\/td\u003e\n\u003ctd\u003eDelta\u003c\/td\u003e\n\u003ctd\u003eType 831\u003c\/td\u003e\n\u003ctd\u003e1979-1994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always verify fitment against your specific vehicle's hub length specification before ordering. If you are unsure, consult the TUV certificate included with the spacers or contact H\u0026amp;R directly.\u003c\/p\u003e\n\u003ch4\u003eProduct Specifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eHRS3014580\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eH\u0026amp;R Part Number\u003c\/td\u003e\n\u003ctd\u003e3014580\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eH\u0026amp;R TRAK+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem\u003c\/td\u003e\n\u003ctd\u003eDR Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpacer Thickness\u003c\/td\u003e\n\u003ctd\u003e15mm per side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrack Widening Per Axle\u003c\/td\u003e\n\u003ctd\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBolt Pattern\u003c\/td\u003e\n\u003ctd\u003e4x98\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenterbore\u003c\/td\u003e\n\u003ctd\u003e58mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Size\u003c\/td\u003e\n\u003ctd\u003eM12x1.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFastener Type\u003c\/td\u003e\n\u003ctd\u003eBolt (longer bolts required, not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSilver anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eProprietary aluminum\/magnesium alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eTUV certified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSold as a pair (2 spacers, one axle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteel Rim Compatible\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eFrequently Asked Questions About H\u0026amp;R HRS3014580\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the HRS3014580 come with wheel bolts?\u003c\/strong\u003e\u003cbr\u003eNo. The HRS3014580 is a DR Series spacer, which means longer wheel bolts are required but not included. You must order longer bolts separately before installation. New bolts must be longer than your original bolts by the spacer thickness, which is 15mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bolt length do I need for the HRS3014580?\u003c\/strong\u003e\u003cbr\u003eMeasure your current wheel bolt length and add 15mm. For example, if your stock bolts are 27mm, you need 42mm bolts. Always match the seat type to your wheels taper seat (60 degree) or ball\/radius seat depending on your specific wheel. If you are unsure, bring the spacer to a shop and test fit before purchasing bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the HRS3014580 hubcentric?\u003c\/strong\u003e\u003cbr\u003eYes. The HRS3014580 has a 58mm centerbore that matches the factory hub diameter on compatible vehicles. This means the spacer centers on the hub precisely, just like the factory wheel does, for even load distribution and vibration-free fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use the HRS3014580 with aftermarket wheels?\u003c\/strong\u003e\u003cbr\u003eYes, as long as the aftermarket wheel uses a 4x98 bolt pattern and accepts the M12x1.25 thread. DR Series spacers are compatible with both OEM and aftermarket wheels. Not compatible with steel rims.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the HRS3014580 fit the US-spec Fiat 500?\u003c\/strong\u003e\u003cbr\u003eYes. The US-market Fiat 500 (2012-2019, Type 312) uses a 4x98 bolt pattern with a 58mm centerbore, the same as the European spec. The HRS3014580 is compatible with US-market Fiat 500 models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many spacers do I need to do all four wheels?\u003c\/strong\u003e\u003cbr\u003eThe HRS3014580 is sold as a pair two spacers that cover one axle. To space all four corners of the vehicle you need to order two pairs (quantity 2 at checkout).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the H\u0026amp;R DR and DRS Series?\u003c\/strong\u003e\u003cbr\u003eThe DR Series (HRS3014580) uses the vehicle's existing bolt holes and requires longer wheel bolts ordered separately. The DRS Series uses longer wheel studs that replace the factory studs and are included in the kit. For 4x98 bolt pattern vehicles like the Fiat 500 and Alfa Romeo MiTo, the DR Series is the correct application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the HRS3014580 TUV certified?\u003c\/strong\u003e\u003cbr\u003eYes. H\u0026amp;R TRAK+ spacers carry TUV certification, which is issued by Germany's Technical Inspection Authority. The TUV certificate confirms the spacer has been tested and approved for specific vehicle applications. A copy is included in the packaging.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the HRS3014580 cause rubbing on my Fiat 500 or Alfa Romeo?\u003c\/strong\u003e\u003cbr\u003eThe 15mm per side widening on the HRS3014580 is a moderate spacing for these platforms. Most stock suspension setups on Fiat 500, Alfa Romeo MiTo, and related vehicles handle 15mm without rubbing. However, if your vehicle is lowered or running wider aftermarket tires, you should measure available clearance at the front wheel arch through the full steering lock before installing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the HRS3014580 affect my factory warranty?\u003c\/strong\u003e\u003cbr\u003eH\u0026amp;R TRAK+ spacers are aftermarket modifications. Under the Magnuson-Moss Warranty Act, a dealer cannot void your factory warranty simply for installing aftermarket parts unless they can prove the part directly caused a failure. However, any damage directly attributable to the spacer installation may not be covered. Consult your dealer if warranty coverage is a concern.\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":45933031424079,"sku":"HRS3014580","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/hr-hrs3014580-15mm-trak-dr-wheel-spacers.png?v=1781900074","url":"https:\/\/www.blackopsautoworks.com\/products\/hr-hrs3014580-trak-plus-dr-15mm-wheel-spacers-4x98-58mm","provider":"Black Ops Auto Works","version":"1.0","type":"link"}