{"product_id":"husky-liners-2892231-aeroskin-chrome-hood-protector-2025-ford-expedition","title":"Husky Liners 2025 Ford Expedition Aeroskin Hood Protector - Chrome","description":"\u003ch4\u003eLow Profile Chrome Hood Protector Built for the 2025 Ford Expedition\u003c\/h4\u003e\n\n\u003cp\u003eThe Husky Liners 2892231 is a chrome Aeroskin low profile hood protector precision molded for the 2025 Ford Expedition. The Husky Liners 2892231 installs directly to the leading edge of the hood with 3M automotive-grade adhesive tape, no drilling, no hardware, no modifications. The 2892231 is constructed from impact-modified acrylic with a polished chrome finish, providing a skin-tight fit against the hood contours that shields paint from rock chips, bugs, and road debris while adding a clean custom look to the Expedition. Made in the USA with global materials. Backed by a Husky Liners Limited Lifetime Warranty.\u003c\/p\u003e\n\n\u003ch4\u003eChrome Finish on a Hood Protector That Actually Fits\u003c\/h4\u003e\n\u003cp\u003eMost hood protectors sit proud of the hood, creating a visible gap that collects bugs and looks like an afterthought. The Husky Liners 2892231 uses Husky's Aeroskin low profile design, which is laser-scanned and custom-molded to the exact leading edge profile of the 2025 Ford Expedition. The result is a protector that follows the hood contour tightly from edge to edge, the lowest profile design on the market. The chrome acrylic construction resists UV, cracking, and discoloration. The included 3M automotive-grade adhesive creates a rattle-free, permanent bond that holds without drilling into the hood.\u003c\/p\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Husky Liners 2892231 Aeroskin Chrome Hood Protector\u003c\/li\u003e\n\u003cli\u003e3M automotive-grade adhesive tape (pre-applied)\u003c\/li\u003e\n\u003cli\u003eInstallation prep materials and instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number (MPN)\u003c\/td\u003e\n\u003ctd\u003e2892231\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eVerify with supplier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHusky Liners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eAeroskin Low Profile Hood Protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eChrome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eImpact-Modified Acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Method\u003c\/td\u003e\n\u003ctd\u003e3M Automotive-Grade Adhesive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrilling Required\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePieces\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA with Global Materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited Lifetime Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalifornia Proposition 65\u003c\/td\u003e\n\u003ctd\u003eApplicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eExpedition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes the Husky Liners 2892231 fit 2025 Ford Expedition Max (extended wheelbase)?\u003c\/strong\u003e\u003cbr\u003e\nThe 2892231 is molded for the 2025 Ford Expedition. Confirm fitment with your specific Expedition configuration before ordering, as some trim-specific hood variations can affect fit. The protector covers the leading edge of the hood, so standard and Max models with the same hood profile are typically compatible.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill the 3M adhesive on the Husky Liners 2892231 damage my Expedition's paint?\u003c\/strong\u003e\u003cbr\u003e\nWhen installed and removed according to Husky Liners instructions, the 3M automotive-grade adhesive is designed not to damage factory paint. Surface preparation is critical. Follow the prep steps in the included instructions and do not attempt to remove the protector in extreme cold without using an adhesive release agent.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan the Husky Liners 2892231 go through an automatic car wash?\u003c\/strong\u003e\u003cbr\u003e\nYes. The 2892231 is car wash safe once the 3M adhesive has fully cured. Husky Liners recommends waiting 24 to 48 hours after installation before exposing the protector to a car wash or high-pressure water.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow long does installation of the Husky Liners 2892231 take?\u003c\/strong\u003e\u003cbr\u003e\nMost installs take approximately one hour. The process involves cleaning the hood surface, using the included prep materials to treat the adhesive bond area, positioning the protector, and pressing firmly to seat the 3M tape. No tools are required.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill the Husky Liners 2892231 fade or yellow over time?\u003c\/strong\u003e\u003cbr\u003e\nNo. The chrome acrylic construction of the 2892231 is UV-stabilized and will not fade, yellow, or discolor from sun exposure under normal use. The chrome finish is integral to the acrylic material, not a surface coating that can peel.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the Husky Liners 2892231 a direct fit or does it require trimming?\u003c\/strong\u003e\u003cbr\u003e\nThe 2892231 is custom molded for the 2025 Ford Expedition and is a direct fit requiring no trimming or modification. Husky Liners laser-scans the vehicle hood profile to produce the custom mold.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes the Husky Liners 2892231 come with a warranty?\u003c\/strong\u003e\u003cbr\u003e\nYes. The 2892231 is backed by the Husky Liners Limited Lifetime Warranty against defects in materials and workmanship.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes the chrome finish on the Husky Liners 2892231 match factory chrome trim?\u003c\/strong\u003e\u003cbr\u003e\nThe 2892231 chrome finish is a polished acrylic that complements factory chrome grille and trim accents on the Expedition. It is not plated metal, so there may be subtle sheen differences compared to deep chrome plating, but it is designed to visually coordinate with the Expedition's chrome trim package.\u003c\/p\u003e\n\n\u003ch4\u003eInstall Instructions\u003c\/h4\u003e\n\u003cp\u003eWash and thoroughly dry the leading edge of the Expedition hood before beginning. Tape the 2892231 temporarily to the hood using painter's tape to establish the correct centered position. Mark the lower edge with tape as a reference. Remove the protector and clean the installation area with the included alcohol prep pad. Apply the included surface prep solution to the adhesive contact area and allow to fully flash off. Peel back the 3M adhesive backing from the protector, align to the reference tape position, and press firmly from center outward to seat the adhesive. Apply firm pressure along the entire length using a clean cloth. Do not wash the vehicle for 24 to 48 hours after installation to allow the adhesive to fully cure.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Residents:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Husky Liners","offers":[{"title":"Default Title","offer_id":45973371617359,"sku":"HSL2892231","price":151.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/Husky_2892231_Chrome_Hood_Protector_2025_Ford.jpg?v=1782514799","url":"https:\/\/www.blackopsautoworks.com\/products\/husky-liners-2892231-aeroskin-chrome-hood-protector-2025-ford-expedition","provider":"Black Ops Auto Works","version":"1.0","type":"link"}