{"product_id":"husky-liners-hsl2830279-aeroskin-ii-hood-deflector-4runner-tacoma","title":"Husky Liners 25-26 Toyota 4Runner \/ 24-26 Tacoma Aeroskin II - Tex. Black","description":"\u003ch4\u003eKeep Your 2024-2026 Tacoma or 2025-2026 4Runner Hood Looking New Against Bugs and Road Debris\u003c\/h4\u003e\n\u003cp\u003eThe Husky Liners HSL2830279 is the Aeroskin II Flush Mount Hood Protector for the 2024-2026 Toyota Tacoma and 2025-2026 Toyota 4Runner. Low-profile, matte black acrylic, and designed to sit flush against the factory hood surface, the HSL2830279 deflects insects, rocks, and road debris away from the hood and leading edge before they can cause chips, pitting, or paint damage. Installation is adhesive-only with no drilling required.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush Mount Aeroskin II Design:\u003c\/strong\u003e The HSL2830279 sits nearly flush with the hood surface for a low-profile, factory-integrated appearance rather than protruding upward like traditional bug deflectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Black Acrylic Construction:\u003c\/strong\u003e UV-stabilized matte black acrylic provides a durable, scratch-resistant surface that complements factory black trim and dark exterior colors without fading\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Molded for 2024-2026 Tacoma and 2025-2026 4Runner:\u003c\/strong\u003e Each Aeroskin II hood protector is precision-molded to match the exact hood contour of the target vehicle, ensuring a tight, gap-free fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo-Drill Installation:\u003c\/strong\u003e The HSL2830279 attaches using automotive-grade 3M adhesive tape without drilling, cutting, or permanent modification to the hood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeflects Bugs, Rocks, and Road Debris:\u003c\/strong\u003e The sloped profile redirects airflow and debris upward and away from the hood surface at highway speeds, protecting the factory paint from pitting and chipping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHusky Liners Limited Lifetime Warranty:\u003c\/strong\u003e Covered under Husky Liners' standard lifetime warranty against cracking, breaking, and warping\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eThis Part Fits\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2024-2026\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003eTacoma\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2025-2026\u003c\/td\u003e\n\u003ctd\u003eToyota\u003c\/td\u003e\n\u003ctd\u003e4Runner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eHSL2830279 \/ 2830279\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e753933282793\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eUV-stabilized acrylic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eMatte black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Method\u003c\/td\u003e\n\u003ctd\u003eAdhesive (no drill)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyle\u003c\/td\u003e\n\u003ctd\u003eAeroskin II Flush Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eHusky Liners limited lifetime\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x Husky Liners HSL2830279 Aeroskin II Hood Protector\u003c\/li\u003e\n\u003cli\u003e3M adhesive tape (pre-applied)\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eAbout Husky Liners\u003c\/h4\u003e\n\u003cp\u003eHusky Liners is a Winona, Minnesota-based manufacturer of custom-fit vehicle protection products including floor liners, cargo liners, mud flaps, and hood protectors. The Aeroskin II line uses 3D scan data of production vehicles to produce hood deflectors with factory-quality fit and finish. Every Husky Liners product is backed by a limited lifetime warranty.\u003c\/p\u003e\n\n\u003ch4\u003eRelated Parts on Our Site\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/husky-liners-hslhbmc19sbs-silverado-sierra-1500-6ft-bed-mat\"\u003eHusky Liners HSLHBMC19SBS Bed Mat 2019-2025 Silverado Sierra 1500\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/husky-liners-hslhbttj97f-guardian-impact-1997-2006-jeep-wrangler-tj-liner\"\u003eHusky Liners HSLHBTTJ97F Guardian Impact Floor Liner 97-06 Wrangler TJ\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the HSL2830279?\u003c\/strong\u003e\u003cp\u003eThe HSL2830279 is the Husky Liners Aeroskin II Flush Mount Hood Protector for the 2024-2026 Toyota Tacoma and 2025-2026 Toyota 4Runner. It is a matte black acrylic deflector that installs with 3M adhesive to protect the hood surface from bugs, rocks, and road debris without drilling.\u003c\/p\u003e\n\u003cstrong\u003eDoes the HSL2830279 require any drilling?\u003c\/strong\u003e\u003cp\u003eNo. The Aeroskin II attaches entirely with automotive-grade 3M adhesive tape. The installation is non-permanent and leaves no holes in the hood, though removing the tape after long-term installation may require adhesive remover to clean the surface.\u003c\/p\u003e\n\u003cstrong\u003eWill the HSL2830279 fit both the standard 4Runner and the TRD Pro trim?\u003c\/strong\u003e\u003cp\u003eThe HSL2830279 is designed for the 2025-2026 Toyota 4Runner platform. Confirm fitment with the specific 4Runner trim you own, as aftermarket hood accessories on TRD Pro and limited models with hood scoops or special vents may not be compatible. Contact Husky Liners to verify before ordering.\u003c\/p\u003e\n\u003cstrong\u003eDoes the Aeroskin II look factory on the Tacoma?\u003c\/strong\u003e\u003cp\u003eYes. The Aeroskin II Flush Mount design sits very close to the hood surface and uses a matte black finish that blends with Tacoma factory trim and black exterior elements, giving a cleaner, more integrated appearance than traditional tall bug deflectors.\u003c\/p\u003e\n\u003cstrong\u003eHow do I install the HSL2830279?\u003c\/strong\u003e\u003cp\u003eClean the hood surface thoroughly with isopropyl alcohol, allow to dry, then peel the backing from the pre-applied 3M tape and press the deflector firmly into position on the leading edge of the hood. The installation typically takes 15-20 minutes and requires no tools.\u003c\/p\u003e\n\u003cstrong\u003eWill the HSL2830279 damage my hood paint when removed?\u003c\/strong\u003e\u003cp\u003eThe 3M adhesive is designed to hold the deflector securely during normal use without permanently bonding to the paint. To remove, use a heat gun on low setting to soften the adhesive tape, then peel slowly. Any residue can be removed with 3M adhesive remover or isopropyl alcohol without damaging clear coat.\u003c\/p\u003e\n\u003cstrong\u003eWhat is the warranty on the HSL2830279?\u003c\/strong\u003e\u003cp\u003eHusky Liners covers the HSL2830279 under their limited lifetime warranty against cracking, breaking, and warping under normal conditions.\u003c\/p\u003e\n\u003cstrong\u003eDoes the HSL2830279 affect hood clearance or engine access?\u003c\/strong\u003e\u003cp\u003eNo. The flush mount profile of the Aeroskin II does not add meaningful height to the hood surface and does not interfere with hood operation, strut clearance, or under-hood access on the Tacoma or 4Runner.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eWash and dry the hood leading edge and the first few inches of the hood surface where the deflector will sit. Remove all wax, grease, and silicone.\u003c\/li\u003e\n\u003cli\u003eClean the mounting surface with isopropyl alcohol and allow to dry completely before applying adhesive.\u003c\/li\u003e\n\u003cli\u003eDry-fit the HSL2830279 against the hood to confirm alignment and mark the position with masking tape if needed.\u003c\/li\u003e\n\u003cli\u003ePeel the 3M tape backing from the deflector, align to the marked position, and press firmly along the full length of the adhesive contact area.\u003c\/li\u003e\n\u003cli\u003eApply firm pressure for 60 seconds across the entire bonded surface to seat the adhesive.\u003c\/li\u003e\n\u003cli\u003eAllow the adhesive to cure for at least 24 hours at room temperature before washing the vehicle or driving at highway speed.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Husky Liners","offers":[{"title":"Default Title","offer_id":46043501396047,"sku":"HSL2830279","price":144.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/husky-liners-25-26-toyota-4runner-24-26-tacoma-aeroskin-ii-tex_-black-husky-liners.jpg?v=1783976108","url":"https:\/\/www.blackopsautoworks.com\/products\/husky-liners-hsl2830279-aeroskin-ii-hood-deflector-4runner-tacoma","provider":"Black Ops Auto Works","version":"1.0","type":"link"}