{"product_id":"injector-dynamics-1050-xds-injector-55mm-length-11mm-machine-top-34-55-d-adaptor-set-of-3","title":"Injector Dynamics ID1050-XDS 11mm machined top \/ 34.55.D bottom adapters, pigtails to the OE harness Fuel Injectors (Set of 3)","description":"\u003ch4\u003eID1050-XDS Injectors in the 11mm machined top \/ 34.55.D bottom adapters, pigtails to the OE harness Configuration (Set of three)\u003c\/h4\u003e\n\u003cp\u003eInjector Dynamics part number 1050.55.11.D.3 is the ID1050-XDS configuration built around a 11mm machined top and 34.55.D bottom adapters, pigtails to the OE harness, supplied here as a matched set of three. Injector Dynamics numbers its X-Series injectors so that body length, top interface and lower interface are fixed by the part number rather than left to the installer, and this exact number ties to the application rows described below.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e11mm machined top \/ 34.55.D bottom adapters, pigtails to the OE harness interface, dynamically matched as a set of three\u003c\/li\u003e\n\u003cli\u003eRated at 1065 cc\/min at 3.0 bar (43.5 psi), measured with gasoline at 52 C (125 F), with a published maximum differential fuel pressure of 10.0 bar (145.0 psi)\u003c\/li\u003e\n\u003cli\u003eCompatible with all known fuels, with a USCAR electrical connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003en.a.\u003c\/td\u003e\n\u003ctd\u003en.a.\u003c\/td\u003e\n\u003ctd\u003en.a.\u003c\/td\u003e\n\u003ctd\u003e2020+ Toyota GR Corolla.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eInjector Dynamics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eID1050-XDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003e1050.55.11.D.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop interface\u003c\/td\u003e\n\u003ctd\u003e11mm machined top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower interface\u003c\/td\u003e\n\u003ctd\u003e34.55.D bottom adapters, pigtails to the OE harness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSet quantity\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal flow rate\u003c\/td\u003e\n\u003ctd\u003e1065 cc\/min at 3.0 bar (43.5 psi), measured with gasoline at 52 C (125 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum differential fuel pressure\u003c\/td\u003e\n\u003ctd\u003e10.0 bar (145.0 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel compatibility\u003c\/td\u003e\n\u003ctd\u003eCompatible with all known fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connector\u003c\/td\u003e\n\u003ctd\u003eUSCAR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign intent\u003c\/td\u003e\n\u003ctd\u003eDesigned specifically for motorsport use, per Injector Dynamics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaged contents and weight\u003c\/td\u003e\n\u003ctd\u003eNot published by Injector Dynamics for this part number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThree Injector Dynamics ID1050-XDS fuel injectors in the 11mm machined top \/ 34.55.D bottom adapters, pigtails to the OE harness configuration, supplied as one dynamically matched set.\u003c\/li\u003e\n\u003cli\u003eInjector Dynamics publishes no packing list beyond the injectors for this part number; treat adapters, spare O-rings, pigtails and mounting hardware not already part of the injector body as separate purchases.\u003c\/li\u003e\n\u003cli\u003eDynamic flow and offset characterization data is published separately online by Injector Dynamics and is not a physical item in the package; pull the current version before tuning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Injector Dynamics\u003c\/h4\u003e\n\u003cp\u003eInjector Dynamics catalogues its X-Series injectors by exact application rather than by a single generic part number, tying body length, top interface and lower interface together in the part number itself. The ID1050-XDS sits in that system as a ID1050-XDS-class injector, and every set ships dynamically matched so the group's flow behaviour tracks together rather than being assembled from unmatched singles.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat configuration does Injector Dynamics part number 1050.55.11.D.3 describe?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA ID1050-XDS injector in the 11mm machined top top \/ 34.55.D bottom adapters, pigtails to the OE harness lower interface, supplied as a matched set of 3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the injectors in this set dynamically matched?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Injector Dynamics dynamically matches its injectors as a group rather than shipping unmatched singles, and its service department asks for the complete set if work is ever needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fuels can this injector run?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatible with all known fuels, per the manufacturer specification for the ID1050-XDS family.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the nominal flow rating?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1065 cc\/min at 3.0 bar (43.5 psi), measured with gasoline at 52 C (125 F), as published by Injector Dynamics for the ID1050-XDS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the maximum differential fuel pressure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e10.0 bar (145.0 psi), per the manufacturer specification table.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat electrical connector does this injector use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA USCAR connector, per the manufacturer specification table.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs vehicle fitment for this exact configuration confirmed by Injector Dynamics?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA retailer associates this configuration with the 2020+ Toyota GR Corolla.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the set include a retune?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. Injector Dynamics publishes dynamic flow and offset characterization data separately online; the engine management system must be configured for this injector before the engine is run.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the molded O-ring retainer be removed from these injectors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnly if Injector Dynamics instructs it for the specific application; removing it on the wrong application can cause catastrophic engine damage, and it cannot be refitted once removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat warranty applies to this injector set?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInjector Dynamics states a warranty period of one year from the date of original purchase against manufacturer defects; failures from the wrong fuel type or inadequate filtration are not covered.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003cp\u003eInjector Dynamics publishes cautions, connector guidance and characterization data for this injector, but no vehicle-specific procedure and no torque figures. The sequence below stays inside what the manufacturer states and hands everything else to the factory service information.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that part number 1050.55.11.D.3 is the exact configuration Injector Dynamics lists for this application before removing anything from the engine.\u003c\/li\u003e\n\u003cli\u003eRecord the four-to-seven digit serial number at the base of each injector connector before installation; Injector Dynamics identifies sets by these numbers for any later service.\u003c\/li\u003e\n\u003cli\u003eDepressurize and isolate the fuel system, then remove the rail per the factory service information for the engine.\u003c\/li\u003e\n\u003cli\u003eOnly when the manufacturer says the application requires it. Injector Dynamics is explicit that this is irreversible and dangerous to perform on the wrong injector. Do this check before any injector goes into the rail.\u003c\/li\u003e\n\u003cli\u003eCheck that each injector seats fully in the rail and in the port with the 11mm machined top and 34.55.D bottom adapters, pigtails to the OE harness described above before committing to the install.\u003c\/li\u003e\n\u003cli\u003eConnect the USCAR connectors per the harness wiring, using a proper crimp rather than a pierce or tap connection.\u003c\/li\u003e\n\u003cli\u003eInjector Dynamics states its connectors are not polarity-specific, but verify the harness wiring matches the engine management system's expected polarity before powering up.\u003c\/li\u003e\n\u003cli\u003eTorque the fuel rail fasteners to the vehicle manufacturer's specification; Injector Dynamics does not publish injector-specific torque values.\u003c\/li\u003e\n\u003cli\u003eLoad the current published dynamic flow and offset data for the ID1050-XDS into the engine management system before starting the engine (not automatically).\u003c\/li\u003e\n\u003cli\u003eStart the engine, check for fuel leaks at the rail and injector seats, and confirm stable idle before road use.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":46380802342991,"sku":"IDX1050.55.11.D.3","price":442.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/injector-dynamics-id1050-xds-11mm-machined-top-34_55_d-bottom-adapters-pigtails-to-the-oe-harness-fuel-injectors-set-of-3-injector-dynamics.jpg?v=1786389819","url":"https:\/\/www.blackopsautoworks.com\/products\/injector-dynamics-1050-xds-injector-55mm-length-11mm-machine-top-34-55-d-adaptor-set-of-3","provider":"Black Ops Auto Works","version":"1.0","type":"link"}