{"product_id":"injector-dynamics-1050cc-high-impedance-injector-60mm-length-14mm-blue-bottom-set-of-8","title":"Injector Dynamics ID1050-XDS Fuel Injectors for Whipple Coyote 2011+ - Set of 8","description":"\u003ch4\u003eInjector Dynamics ID1050-XDS Injectors for the Whipple Coyote 2011+ Configuration\u003c\/h4\u003e\u003cp\u003eInjector Dynamics lists part number 1050.60.14.14W.8 under Ford for the Whipple Coyote 2011+ application, supplied as a set of eight. The listing is defined by the supercharger and manifold package rather than by a vehicle year and trim, which is why the manufacturer entry names the Whipple Coyote combination instead of a specific Mustang or F-150 model.\u003c\/p\u003e\u003cp\u003eThe configuration is a 60 mm body with a 14 mm top interface and the 14W lower arrangement Injector Dynamics specifies for this application. Flow is 1065 cc\/min at 3.0 bar with a maximum differential pressure of 10.0 bar, the highest pressure ceiling in the X-Series.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSupplied as a dynamically matched set of eight injectors in the 1050.60.14.14W.8 configuration\u003c\/li\u003e\n\u003cli\u003eCompact body that Injector Dynamics says fits more than 200 applications, including engines that use short-body injectors\u003c\/li\u003e\n\u003cli\u003eImproved internal flow path that raises output by five percent without sacrificing low-flow performance\u003c\/li\u003e\n\u003cli\u003eStronger magnetic circuit for stable operation up to 10 bar\u003c\/li\u003e\n\u003cli\u003eReplaceable inlet filter to extend service life\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant internals for compatibility with all known fuels and extended service life on corrosive fuels\u003c\/li\u003e\n\u003cli\u003eListed by Injector Dynamics for Whipple Coyote 2011+\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003cp\u003eThis is a configuration-driven application entry. Injector Dynamics does not publish vehicle years, models or trims for it, and the 14W lower arrangement is what distinguishes it from the otherwise similar 60 mm configurations, so no vehicle-year fitment tags are claimed on this listing.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eManufacturer entry\u003c\/th\u003e\n\u003cth\u003eListed under\u003c\/th\u003e\n\u003cth\u003eWhat has to match\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eWhipple Coyote 2011+\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eA Whipple supercharger package on a Coyote engine, using a rail that accepts the 60 mm body with the 14 mm top interface and the 14W lower arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eInjector Dynamics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eID1050-XDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003e1050.60.14.14W.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal flow rate\u003c\/td\u003e\n\u003ctd\u003e1065 cc\/min at 3.0 bar (43.5 psi), measured with gasoline at 52 C (125 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum differential fuel pressure\u003c\/td\u003e\n\u003ctd\u003e10.0 bar (145.0 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel compatibility\u003c\/td\u003e\n\u003ctd\u003eCompatible with all known fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connector\u003c\/td\u003e\n\u003ctd\u003eUSCAR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration code\u003c\/td\u003e\n\u003ctd\u003e60.14.14W as published by Injector Dynamics for the Whipple Coyote 2011+ entry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody length\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop interface size\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower interface\u003c\/td\u003e\n\u003ctd\u003e14W arrangement specified for the Whipple Coyote application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSet quantity\u003c\/td\u003e\n\u003ctd\u003eEight injectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListed application\u003c\/td\u003e\n\u003ctd\u003eWhipple Coyote 2011+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign intent\u003c\/td\u003e\n\u003ctd\u003eDesigned specifically for motorsport use, per Injector Dynamics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eOne year from date of original purchase against manufacturer defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight and packaged dimensions\u003c\/td\u003e\n\u003ctd\u003eNot published by Injector Dynamics for this part number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e8 Injector Dynamics ID1050-XDS fuel injectors in the 1050.60.14.14W.8 configuration, supplied as one dynamically matched set.\u003c\/li\u003e\n\u003cli\u003eInjector Dynamics publishes no contents list against this configuration. Anything else the job needs, such as service seals or connector kits, has to be ordered on its own.\u003c\/li\u003e\n\u003cli\u003eThe characterization tables for this injector live on the manufacturer's site and are updated over time, so pull the current version rather than relying on a printed copy.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout Injector Dynamics\u003c\/h4\u003e\u003cp\u003eInjector Dynamics catalogues every injector by exact configuration and application, then matches the injectors dynamically before they ship. The ID1050-XDS is the family member built around a compact body and a ten-bar pressure ceiling, with corrosion-resistant internals for fuels that attack ordinary injector materials.\u003c\/p\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhere does the flow rating come from?\u003c\/strong\u003e\u003cp\u003eIt is the manufacturer nominal figure for the ID1050-XDS: 1065 cc\/min at 3.0 bar (43.5 psi), measured with gasoline at 52 C (125 F).\u003c\/p\u003e\u003cstrong\u003eWhat is the pressure ceiling?\u003c\/strong\u003e\u003cp\u003eInjector Dynamics publishes a maximum differential fuel pressure of 10.0 bar (145.0 psi) for this model.\u003c\/p\u003e\u003cstrong\u003eWill corrosive fuels shorten injector life?\u003c\/strong\u003e\u003cp\u003eInjector Dynamics publishes compatibility as follows: Compatible with all known fuels. The warranty terms still require correct fuel type and filtration.\u003c\/p\u003e\u003cstrong\u003eDo these need a connector adapter?\u003c\/strong\u003e\u003cp\u003eThe injector is specified with a USCAR connector, so the harness has to match that or be adapted.\u003c\/p\u003e\u003cstrong\u003eWhat does dynamically matched mean here?\u003c\/strong\u003e\u003cp\u003eInjector Dynamics groups injectors so their dynamic flow behaviour tracks together, which is what its matched-set articles demonstrate.\u003c\/p\u003e\u003cstrong\u003eHow long are these covered for?\u003c\/strong\u003e\u003cp\u003eOne year from the date of original purchase, covering manufacturer defects, per the manufacturer warranty statement.\u003c\/p\u003e\u003cstrong\u003eShould the retainer be removed before installation?\u003c\/strong\u003e\u003cp\u003eNot by default. Injector Dynamics treats removal as a modification to be carried out only on its instruction.\u003c\/p\u003e\u003cstrong\u003eHow is a suspect injector diagnosed?\u003c\/strong\u003e\u003cp\u003eInjector Dynamics asks for the four to seven digit serial number found at the base of the connector, then processes the full set through its cleaning and inspection service.\u003c\/p\u003e\u003cstrong\u003eIs characterization data available?\u003c\/strong\u003e\u003cp\u003eInjector Dynamics publishes dynamic flow and offset data for its injectors and updates it over time, so the current data should be pulled before tuning.\u003c\/p\u003e\u003cstrong\u003eIs this set specific to one Mustang or F-150 model year?\u003c\/strong\u003e\u003cp\u003eNo. The manufacturer entry is the Whipple Coyote 2011+ package, so the supercharger and rail combination is what has to match rather than a particular vehicle trim.\u003c\/p\u003e\u003cstrong\u003eWhat separates the 14W lower arrangement from the plain 14 configuration?\u003c\/strong\u003e\u003cp\u003eInjector Dynamics assigns the 14W code only to the Whipple Coyote entry, alongside its separate 60.14.14 and 60.14.14B configurations. The exact code has to be matched to the rail rather than substituted.\u003c\/p\u003e\u003cstrong\u003eWhy does this configuration use the 60 mm body?\u003c\/strong\u003e\u003cp\u003eThe 60 mm body length is the dimension Injector Dynamics specifies for this application so that the injector sits correctly between the rail and the manifold port.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003cp\u003eNo exact-part-number installation sheet or torque figure exists for this configuration. What follows combines the manufacturer's published cautions and connector guidance with a clear instruction to use factory service information for the engine.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm that part number 1050.60.14.14W.8 is the configuration Injector Dynamics lists for Whipple-supercharged Coyote engines from 2011 onward before removing anything from the engine.\u003c\/li\u003e\n\u003cli\u003eLog the serial number on each injector body at the base of the connector. It is the identifier the manufacturer uses for any warranty or service claim.\u003c\/li\u003e\n\u003cli\u003eBleed off fuel pressure, disconnect the supply safely and remove the rail exactly as the factory service information directs; the injector manufacturer publishes no removal steps.\u003c\/li\u003e\n\u003cli\u003eDo not trim the molded O-ring retainer. The manufacturer states the modification should only be performed when it instructs you to, and that it cannot be reversed.\u003c\/li\u003e\n\u003cli\u003eCheck that the injector seats fully in both the rail and the port with the 60 mm body and its listed interfaces before committing to the install.\u003c\/li\u003e\n\u003cli\u003eIf the loom is being terminated, follow the published method: roughly 5 mm of insulation removed, wire seated through the seal into the terminal, conductor aligned with the crimp section, crimp.\u003c\/li\u003e\n\u003cli\u003eEither pin can take power or ground, because Injector Dynamics states the injector connectors are not polarity specific.\u003c\/li\u003e\n\u003cli\u003eTighten the rail and related fasteners strictly to factory service values; Injector Dynamics does not publish a torque figure for this injector.\u003c\/li\u003e\n\u003cli\u003ePull the newest published characterization data for the ID1050-XDS and enter it into the engine management system ahead of the first start.\u003c\/li\u003e\n\u003cli\u003ePressure-test before the first start, check for leaks, and make sure fuel filtration is adequate, since the manufacturer excludes failures caused by poor filtration.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":46380802441295,"sku":"IDX1050.60.14.14W.8","price":1185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/injector-dynamics-id1050-xds-fuel-injectors-for-whipple-coyote-2011-set-of-8-injector-dynamics.jpg?v=1786381127","url":"https:\/\/www.blackopsautoworks.com\/products\/injector-dynamics-1050cc-high-impedance-injector-60mm-length-14mm-blue-bottom-set-of-8","provider":"Black Ops Auto Works","version":"1.0","type":"link"}