{"product_id":"injector-dynamics-1750-xds-injector-w-electrical-conn-34mm-length-w-o-adapter-14mm-o-ring-qty-4","title":"Injector Dynamics ID1750-XDS Fuel Injectors for Audi and Volkswagen EA888 Gen 3 - Set of 4","description":"\u003ch4\u003eInjector Dynamics ID1750-XDS Injectors for Audi and Volkswagen EA888 Gen 3 Engines\u003c\/h4\u003e\u003cp\u003eInjector Dynamics lists part number 1750.34.14.14.4 under both Audi and Volkswagen for the EA888 Gen 3 engine, and supplies it as a set of four. Because the application is defined by the engine generation rather than by a car, the engine has to be identified before ordering.\u003c\/p\u003e\u003cp\u003eThe set uses the 34 mm short-body configuration with 14 mm top and lower interfaces. Injector Dynamics builds the ID1750-XDS specifically for motorsport service and lists it as compatible with methanol, ethanol, MTBE, nitromethane and all known hydrocarbon fuels.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSupplied as a dynamically matched set of four injectors in the 1750.34.14.14.4 configuration\u003c\/li\u003e\n\u003cli\u003eEvery dimensionally critical internal part made from corrosion-resistant material, per the X-Series design brief\u003c\/li\u003e\n\u003cli\u003eHigh-flow motorsport injector rated at 1728 cc\/min at 3.0 bar on E10 certification fuel\u003c\/li\u003e\n\u003cli\u003eCompatibility with methanol, ethanol, MTBE, nitromethane and all known hydrocarbon fuels\u003c\/li\u003e\n\u003cli\u003eUSCAR electrical connector\u003c\/li\u003e\n\u003cli\u003ePublished dynamic flow and offset data from 8 to 16 volts across the full pressure range\u003c\/li\u003e\n\u003cli\u003eListed by Injector Dynamics for Audi and Volkswagen EA888 Gen 3\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003cp\u003eBoth manufacturer entries name an engine generation, not a vehicle, so this listing carries no vehicle-year fitment tags. Confirm that the engine is an EA888 Gen 3 and that its port injection rail accepts the 34 mm configuration.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eManufacturer entry\u003c\/th\u003e\n\u003cth\u003eListed under\u003c\/th\u003e\n\u003cth\u003ePublished years\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi EA888 Gen 3\u003c\/td\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eNone published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVW EA888 Gen 3\u003c\/td\u003e\n\u003ctd\u003eVolkswagen\u003c\/td\u003e\n\u003ctd\u003eNone published\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eInjector Dynamics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eID1750-XDS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer part number\u003c\/td\u003e\n\u003ctd\u003e1750.34.14.14.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal flow rate\u003c\/td\u003e\n\u003ctd\u003e1728 cc\/min at 3.0 bar (43.5 psi), measured with E10 emissions certification fuel at 49 C (120 F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum differential fuel pressure\u003c\/td\u003e\n\u003ctd\u003e7.0 bar (101.5 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel compatibility\u003c\/td\u003e\n\u003ctd\u003eCompatible with methanol, ethanol, MTBE, nitromethane and all known hydrocarbon fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connector\u003c\/td\u003e\n\u003ctd\u003eUSCAR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration code\u003c\/td\u003e\n\u003ctd\u003e34.14.14, also offered as a universal part number without a set quantity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody length\u003c\/td\u003e\n\u003ctd\u003e34 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop interface size\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower interface size\u003c\/td\u003e\n\u003ctd\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSet quantity\u003c\/td\u003e\n\u003ctd\u003eFour injectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eListed application\u003c\/td\u003e\n\u003ctd\u003eAudi and Volkswagen EA888 Gen 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign intent\u003c\/td\u003e\n\u003ctd\u003eDesigned specifically for motorsport use, per Injector Dynamics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eOne year from date of original purchase against manufacturer defects\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight and packaged dimensions\u003c\/td\u003e\n\u003ctd\u003eNot published by Injector Dynamics for this part number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4 Injector Dynamics ID1750-XDS fuel injectors in the 1750.34.14.14.4 configuration, supplied as one dynamically matched set.\u003c\/li\u003e\n\u003cli\u003eInjector Dynamics does not publish a packaged-contents list for this part number, so no adapters, O-rings, seals, pigtails, connectors or mounting hardware should be assumed beyond the injectors themselves.\u003c\/li\u003e\n\u003cli\u003eDynamic flow and offset characterization data is published by Injector Dynamics online rather than supplied as a printed insert.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout Injector Dynamics\u003c\/h4\u003e\u003cp\u003eInjector Dynamics positions the ID1750-XDS as the high-flow step in its motorsport range, rated on E10 certification fuel and listed as compatible with methanol, ethanol, MTBE, nitromethane and all known hydrocarbon fuels. Every application in its catalogue points at an exact configuration and set quantity rather than a generic flow figure.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/injector-dynamics-id1050x-fuel-injectors-34mm-length-14mm-top-o-ring-14mm-lower-o-ring-set-of-4\"\u003eInjector Dynamics ID1050-XDS injectors, part number 1050.34.14.14.4, listed for both the Audi and Volkswagen EA888 Gen 3 applications\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/injector-dynamics-1340cc-injector-34mm-length-no-adaptor-top-14mm-up-o-ring-14mm-low-o-ring-qty-4\"\u003eInjector Dynamics ID1300-XDS injectors, part number 1300.34.14.14.4, listed by the manufacturer for the Volkswagen EA888 Gen 3 application\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the nominal flow of the ID1750-XDS?\u003c\/strong\u003e\u003cp\u003e1728 cc\/min at 3.0 bar (43.5 psi), measured with E10 emissions certification fuel at 49 C (120 F), as published by Injector Dynamics.\u003c\/p\u003e\u003cstrong\u003eIs there a limit on base fuel pressure?\u003c\/strong\u003e\u003cp\u003eYes. The manufacturer specifies a maximum differential fuel pressure of 7.0 bar (101.5 psi).\u003c\/p\u003e\u003cstrong\u003eCan these be run on ethanol?\u003c\/strong\u003e\u003cp\u003eThe manufacturer fuel compatibility statement reads: Compatible with methanol, ethanol, MTBE, nitromethane and all known hydrocarbon fuels.\u003c\/p\u003e\u003cstrong\u003eWhat electrical connector is fitted?\u003c\/strong\u003e\u003cp\u003eThe manufacturer specification is a USCAR connector.\u003c\/p\u003e\u003cstrong\u003eIs this a matched set or loose injectors?\u003c\/strong\u003e\u003cp\u003eIt is a matched set. Injector Dynamics dynamically matches injectors together rather than shipping unmatched singles.\u003c\/p\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cp\u003eInjector Dynamics states a warranty period of one year from the date of original purchase covering manufacturer defects.\u003c\/p\u003e\u003cstrong\u003eCan the retainer be put back on after removal?\u003c\/strong\u003e\u003cp\u003eNo. Injector Dynamics states that once the molded O-ring retainer is removed it cannot be refitted.\u003c\/p\u003e\u003cstrong\u003eDoes the manufacturer service its own injectors?\u003c\/strong\u003e\u003cp\u003eIt does. The cleaning and inspection service requires every injector in the set and identifies them by the serial number at the base of the connector.\u003c\/p\u003e\u003cstrong\u003eWhat data does the tuner need?\u003c\/strong\u003e\u003cp\u003eThe published dynamic flow and offset values across the voltage and pressure range for this injector model.\u003c\/p\u003e\u003cstrong\u003eWhich cars use the EA888 Gen 3?\u003c\/strong\u003e\u003cp\u003eInjector Dynamics does not publish a vehicle list against this entry, so the engine itself has to be identified on the car rather than inferred from a model name.\u003c\/p\u003e\u003cstrong\u003eDo these replace the direct injectors on an EA888 Gen 3?\u003c\/strong\u003e\u003cp\u003eNo. These are port-style injectors with a USCAR connector supplied in the 34 mm configuration Injector Dynamics lists for the application, so the rail they are going into must accept that configuration.\u003c\/p\u003e\u003cstrong\u003eIs the earlier EA888 covered?\u003c\/strong\u003e\u003cp\u003eThe manufacturer entry names Gen 3 specifically, and separate part numbers are listed for the older 1.8T and VR6 engines, so earlier generations are outside the scope of this set.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003cp\u003eThe manufacturer publishes cautions, connector guidance and characterization data, but no step-by-step installation procedure for this part number. Treat the factory service information for the engine as the authority on rail removal and fastener torque.\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eConfirm that part number 1750.34.14.14.4 is the configuration Injector Dynamics lists for Audi and Volkswagen EA888 Gen 3 engines before removing anything from the engine.\u003c\/li\u003e\n\u003cli\u003eNote the serial numbers stamped at the base of each connector so the set can be identified later; Injector Dynamics requires them for service requests.\u003c\/li\u003e\n\u003cli\u003eRelieve fuel pressure and isolate the supply, then take the rail off using the factory service information, since no manufacturer removal procedure exists for this configuration.\u003c\/li\u003e\n\u003cli\u003eKeep the molded O-ring retainer intact. Removal is a manufacturer-directed modification only, and is permanent once done.\u003c\/li\u003e\n\u003cli\u003eCheck that the injector seats fully in both the rail and the port with the 34 mm body and its listed interfaces before committing to the install.\u003c\/li\u003e\n\u003cli\u003eIf the harness needs Injector Dynamics connectors assembled, strip roughly 5 mm of insulation, feed the wire through the seal and into the terminal, align the bare wire with the crimp section of the terminal and crimp it.\u003c\/li\u003e\n\u003cli\u003eConnect the two pins in whichever order suits the loom. Injector Dynamics states injector connector polarity is not specific.\u003c\/li\u003e\n\u003cli\u003eTorque the rail and any disturbed fasteners to the values in the factory service information for the engine. Injector Dynamics does not publish torque figures for this part number, so no generic value should be substituted.\u003c\/li\u003e\n\u003cli\u003eEnter the manufacturer's latest dynamic flow and offset tables for the ID1750-XDS into the ECU before the first start.\u003c\/li\u003e\n\u003cli\u003eBring the system up to pressure with the engine off, look hard for leaks at every seal, and confirm the filtration standard the warranty terms depend on.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":46380802932815,"sku":"IDX1750.34.14.14.4","price":1315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/injector-dynamics-id1750-xds-fuel-injectors-for-audi-and-volkswagen-ea888-gen-3-set-of-4-injector-dynamics.jpg?v=1786393472","url":"https:\/\/www.blackopsautoworks.com\/products\/injector-dynamics-1750-xds-injector-w-electrical-conn-34mm-length-w-o-adapter-14mm-o-ring-qty-4","provider":"Black Ops Auto Works","version":"1.0","type":"link"}