{"product_id":"injector-dynamics-o-ring-seal-service-kit-for-injector-w-14mm-top-adapter-and-14mm-bottom","title":"Injector Dynamics O-Ring\/Seal Service Kit, 14mm Top Adapter and 14mm Bottom","description":"\u003ch4\u003eA Retailer-Confirmed Service Kit for a 14mm Top Adapter and 14mm Bottom Interface\u003c\/h4\u003e\n\u003cp\u003eRetailer product pages identify SK.60.14.14 as an Injector Dynamics O-ring\/seal service kit for an injector with a 14mm top adapter and a 14mm bottom, with package dimensions of roughly 7.00 x 4.00 x 3.00 inches.\u003c\/p\u003e\n\u003cp\u003eVerify the injector's top-adapter and bottom dimensions against this kit's 14mm\/14mm specification before ordering.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eService kit sized for an injector with a 14mm top adapter and a 14mm bottom interface\u003c\/li\u003e\n\u003cli\u003eRetailer-listed package dimensions of approximately 7.00 in x 4.00 in x 3.00 in\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003en.a.\u003c\/td\u003e\n\u003ctd\u003en.a.\u003c\/td\u003e\n\u003ctd\u003en.a.\u003c\/td\u003e\n\u003ctd\u003eUniversal 14mm top adapter, 14mm bottom interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eInjector Dynamics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVendor part number\u003c\/td\u003e\n\u003ctd\u003eSK.60.14.14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTop adapter size\u003c\/td\u003e\n\u003ctd\u003e14mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBottom size\u003c\/td\u003e\n\u003ctd\u003e14mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage dimensions\u003c\/td\u003e\n\u003ctd\u003eApproximately 7.00 in (depth) x 4.00 in (width) x 3.00 in (height), per retailer listing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eInjector O-ring\/seal service components sized for a 14mm top adapter and 14mm bottom interface, per retailer listing.\u003c\/li\u003e\n\u003cli\u003eNo itemized seal count or manufacturer packing list is published for this exact part number.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Injector Dynamics\u003c\/h4\u003e\n\u003cp\u003eInjector Dynamics develops fuel-system components around published specifications and application data rather than generic marketing claims, and applies the same exact-configuration approach to its adapters, filters and pump systems that it uses for its fuel injectors.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWhat top-adapter size does SK.60.14.14 use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSupplier listings describe a 14mm top adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat bottom configuration does SK.60.14.14 use?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSupplier listings describe a 14mm bottom interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this kit include the injector itself?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is an O-ring\/seal service kit for an existing injector, not a replacement injector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should the exact seal configuration be verified before ordering?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompare the physical top-adapter and bottom O-ring or adapter dimensions on the injector being serviced against the supplier-listed configuration before ordering, since no manufacturer page confirms this exact part number.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs an installation procedure included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo exact-kit installation instructions are published; general Injector Dynamics guidance warns that the molded O-ring retainer should only be removed on the manufacturer's instruction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a torque specification published for reassembly?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. No torque value is published for this exact seal kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the molded injector O-ring retainer be cut or removed during this service?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnly if Injector Dynamics instructs it for the specific application; incorrect removal can cause catastrophic engine damage, and it cannot be refitted once removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs vehicle-specific fitment documented for this seal kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. This is an injector-configuration-specific service kit, not a vehicle-specific part; no make, model, or year fitment is published.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat package dimensions are listed for this kit?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApproximately 7.00 in x 4.00 in x 3.00 in, per a retailer product listing.\u003c\/p\u003e\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003cp\u003eNo installation procedure or torque specification is published for this exact seal kit. The steps below reflect only general injector-service handling practice.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDepressurize and isolate the fuel system before removing the injector rail.\u003c\/li\u003e\n\u003cli\u003eRemove the injector from the rail and note its orientation before disturbing any seals.\u003c\/li\u003e\n\u003cli\u003eCompare the injector's existing top-adapter and bottom dimensions against this kit's 14mm\/14mm specification before proceeding.\u003c\/li\u003e\n\u003cli\u003eDo not remove the molded O-ring retainer unless Injector Dynamics instructs it for this specific application.\u003c\/li\u003e\n\u003cli\u003eClean the injector body and seating surfaces before fitting new seals.\u003c\/li\u003e\n\u003cli\u003eLightly lubricate new O-rings with a lubricant compatible with the fuel in use, then seat them without twisting.\u003c\/li\u003e\n\u003cli\u003eReinstall the injector in the rail, confirming it seats fully before reinstalling the rail.\u003c\/li\u003e\n\u003cli\u003eReinstall the fuel rail per the vehicle's factory service information and torque fasteners to specification.\u003c\/li\u003e\n\u003cli\u003ePressurize the fuel system and check for leaks before starting the engine.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Injector Dynamics","offers":[{"title":"Default Title","offer_id":46380804735055,"sku":"IDXSK.60.14.14","price":3.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/injector-dynamics-o-ringseal-service-kit-14mm-top-adapter-and-14mm-bottom-injector-dynamics.png?v=1786381171","url":"https:\/\/www.blackopsautoworks.com\/products\/injector-dynamics-o-ring-seal-service-kit-for-injector-w-14mm-top-adapter-and-14mm-bottom","provider":"Black Ops Auto Works","version":"1.0","type":"link"}