{"product_id":"isr-is-rtr-q60-rear-traction-rods-infiniti-q60-q50","title":"ISR Performance Rear Traction Rods for 2017+ Infiniti Q60 \/ 2014+ Q50","description":"\u003ch4\u003eLock In Your Rear Alignment and Kill the Toe Wander That Kills Your Q60 and Q50 Cornering\u003c\/h4\u003e\n\u003cp\u003eThe ISR Performance IS-RTR-Q60 Rear Traction Rods are precision engineered for the 2017 and newer Infiniti Q60 CV37 and 2014 and newer Infiniti Q50 V37 to provide full adjustment control of your rear suspension geometry. The factory rear traction rods use rubber bushings that deflect under hard acceleration and braking, allowing your rear toe angle to shift unpredictably and undermine both grip and stability. The IS-RTR-Q60 replaces those with rigid adjustable rod ends that lock your rear traction rod length in place so your alignment stays exactly where you set it, lap after lap and canyon run after canyon run. Pair the IS-RTR-Q60 with ISR Performance rear camber arms and toe arms to dial in the full rear suspension geometry of your V37 platform.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eISR Performance IS-RTR-Q60 bolt-on rear traction rods for 2014-2024 Infiniti Q50 V37 and 2017-2024 Infiniti Q60 CV37\u003c\/li\u003e\n\u003cli\u003eEliminates factory rubber bushing deflection that causes rear toe change under acceleration and braking loads\u003c\/li\u003e\n\u003cli\u003eAdjustable design provides precise rear traction rod length tuning for alignment correction\u003c\/li\u003e\n\u003cli\u003eRigid rod end construction locks rear alignment at the set position through hard cornering and braking\u003c\/li\u003e\n\u003cli\u003ePairs with ISR Performance IS-RCA-Q60 rear camber arms and IS-RTC-Q60 rear toe arms for complete V37 rear geometry control\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation using OEM mounting points on 2014+ Q50 V37 and 2017+ Q60 CV37\u003c\/li\u003e\n\u003cli\u003eSold as a pair with rear spacer sets included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2024\u003c\/td\u003e\n\u003ctd\u003eInfiniti\u003c\/td\u003e\n\u003ctd\u003eQ50\u003c\/td\u003e\n\u003ctd\u003eLuxe RWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2024\u003c\/td\u003e\n\u003ctd\u003eInfiniti\u003c\/td\u003e\n\u003ctd\u003eQ50\u003c\/td\u003e\n\u003ctd\u003eLuxe AWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2024\u003c\/td\u003e\n\u003ctd\u003eInfiniti\u003c\/td\u003e\n\u003ctd\u003eQ50\u003c\/td\u003e\n\u003ctd\u003eRed Sport 400 AWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2024\u003c\/td\u003e\n\u003ctd\u003eInfiniti\u003c\/td\u003e\n\u003ctd\u003eQ50\u003c\/td\u003e\n\u003ctd\u003eRed Sport 400 RWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2024\u003c\/td\u003e\n\u003ctd\u003eInfiniti\u003c\/td\u003e\n\u003ctd\u003eQ50\u003c\/td\u003e\n\u003ctd\u003eSport AWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2024\u003c\/td\u003e\n\u003ctd\u003eInfiniti\u003c\/td\u003e\n\u003ctd\u003eQ60\u003c\/td\u003e\n\u003ctd\u003ePure AWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2024\u003c\/td\u003e\n\u003ctd\u003eInfiniti\u003c\/td\u003e\n\u003ctd\u003eQ60\u003c\/td\u003e\n\u003ctd\u003eLuxe AWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2024\u003c\/td\u003e\n\u003ctd\u003eInfiniti\u003c\/td\u003e\n\u003ctd\u003eQ60\u003c\/td\u003e\n\u003ctd\u003eRed Sport 400 AWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2024\u003c\/td\u003e\n\u003ctd\u003eInfiniti\u003c\/td\u003e\n\u003ctd\u003eQ60\u003c\/td\u003e\n\u003ctd\u003eRed Sport 400 RWD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eIS-RTR-Q60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eISR Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eAdjustable Rear Traction Rods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment Platforms\u003c\/td\u003e\n\u003ctd\u003eInfiniti Q50 V37 (2014+), Infiniti Q60 CV37 (2017+)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAdjustable rod end design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSold as a Pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eBolt-On, OEM mounting points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2x ISR Performance IS-RTR-Q60 rear traction rods\u003c\/li\u003e\n\u003cli\u003e2x Rear spacer sets\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWhat does the ISR Performance IS-RTR-Q60 rear traction rod actually do on the Infiniti Q50 and Q60?\u003c\/strong\u003e\n\u003cp\u003eThe IS-RTR-Q60 replaces the factory rubber-bushed rear traction rods on the 2014+ Infiniti Q50 V37 and 2017+ Infiniti Q60 CV37. The OEM rubber bushings allow the traction rod to flex under acceleration and braking loads, causing your rear toe angle to shift and creating unstable handling behavior. The IS-RTR-Q60 uses rigid adjustable rod ends that eliminate bushing deflection entirely, keeping your rear alignment locked in at your set toe angle under all driving conditions.\u003c\/p\u003e\n\n\u003cstrong\u003eIs the ISR Performance IS-RTR-Q60 compatible with my 2014-2019 Infiniti Q50 as well as the Q60?\u003c\/strong\u003e\n\u003cp\u003eYes. The IS-RTR-Q60 fits both the 2017 and newer Infiniti Q60 CV37 and the 2014 and newer Infiniti Q50 V37. Both platforms share the same rear suspension architecture, making the IS-RTR-Q60 a direct bolt-on replacement on all V37 platform variants produced through 2024.\u003c\/p\u003e\n\n\u003cstrong\u003eDo I need adjustable control arms to use the ISR Performance IS-RTR-Q60 traction rods?\u003c\/strong\u003e\n\u003cp\u003eIf you are installing the IS-RTR-Q60 on a stock-height vehicle, the factory alignment settings can typically be maintained with the traction rods set to OEM length. However, if your Q50 or Q60 is lowered or if you plan to adjust rear toe, you will need adjustable rear toe arms and rear camber arms (such as the ISR IS-RTC-Q60 and IS-RCA-Q60) to properly realign the rear suspension after deleting the factory bushed traction rods.\u003c\/p\u003e\n\n\u003cstrong\u003eCan the ISR IS-RTR-Q60 be used on a daily driven Infiniti Q50 or Q60 on public roads?\u003c\/strong\u003e\n\u003cp\u003eThe IS-RTR-Q60 is designed and sold as a performance suspension component. Check your local regulations regarding aftermarket suspension components on street-driven vehicles. ISR Performance notes that some of their competition-focused components are intended for off-highway use only. Verify compliance with your local laws before installing on a street-driven vehicle.\u003c\/p\u003e\n\n\u003cstrong\u003eHow difficult is it to install the ISR Performance IS-RTR-Q60 on a Q50 or Q60 at home?\u003c\/strong\u003e\n\u003cp\u003eThe IS-RTR-Q60 is a bolt-on replacement that attaches to the OEM rear subframe and knuckle mounting points. A basic lift or jack stands, standard metric hand tools, and penetrating oil for the factory hardware are sufficient for most DIY installers. A professional alignment is strongly recommended after installation to set rear toe to specification. Most experienced installers complete both sides in two to three hours.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat is the difference between the ISR Performance IS-RTR-Q60 traction rod and the IS-RTC-Q60 rear toe arm?\u003c\/strong\u003e\n\u003cp\u003eThe IS-RTR-Q60 is the rear traction rod, which controls fore-aft location of the rear knuckle and prevents toe change under longitudinal load (acceleration and braking). The IS-RTC-Q60 is the rear toe control arm, which directly sets static rear toe angle. Both work together as part of a complete ISR Performance V37 rear suspension alignment system for the Q50 and Q60.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes the ISR Performance IS-RTR-Q60 fit Q50 and Q60 models with AWD as well as RWD?\u003c\/strong\u003e\n\u003cp\u003eYes. The IS-RTR-Q60 is compatible with both AWD and RWD configurations of the 2014+ Infiniti Q50 V37 and 2017+ Infiniti Q60 CV37, as the rear traction rod mounting geometry is shared across both drivetrain configurations on the V37 platform.\u003c\/p\u003e\n\n\u003cstrong\u003eWill the ISR Performance IS-RTR-Q60 fit 2022, 2023, or 2024 Infiniti Q50 and Q60 models?\u003c\/strong\u003e\n\u003cp\u003eYes. Infiniti continued production of the Q50 V37 through 2024 and the Q60 CV37 through 2024 without major rear suspension architecture changes. The IS-RTR-Q60 is compatible with all model years of the V37 platform from the Q50's 2014 introduction through the 2024 model year for both Q50 and Q60.\u003c\/p\u003e\n\n\u003cstrong\u003eDo the ISR Performance IS-RTR-Q60 traction rods come with all hardware needed for installation?\u003c\/strong\u003e\n\u003cp\u003eYes. Each set includes 2x rear traction rods and 2x rear spacer sets along with all hardware required for installation. No additional adapters or brackets are needed for direct fitment on the 2014+ Infiniti Q50 V37 and 2017+ Infiniti Q60 CV37 at OEM rear subframe mounting points.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eSafely raise and support the Q50 or Q60 on jack stands at all four corners to provide full undercarriage access.\u003c\/li\u003e\n\u003cli\u003eLocate the factory rear traction rod on one side. Note the orientation of the factory hardware before removal.\u003c\/li\u003e\n\u003cli\u003eApply penetrating oil to the factory traction rod mounting bolts at the subframe and knuckle ends. Allow to soak for 10 minutes.\u003c\/li\u003e\n\u003cli\u003eSupport the rear knuckle with a floor jack to prevent suspension droop while removing the traction rod.\u003c\/li\u003e\n\u003cli\u003eRemove the factory traction rod mounting bolts and slide out the OEM traction rod and bushing assembly.\u003c\/li\u003e\n\u003cli\u003eInstall the ISR Performance IS-RTR-Q60 traction rod and spacer set in the factory mounting locations.\u003c\/li\u003e\n\u003cli\u003eHand-tighten the mounting hardware and set the traction rod length to approximate OEM specification before final torquing.\u003c\/li\u003e\n\u003cli\u003eTorque all mounting hardware to OEM specification with the suspension at ride height, not at full droop.\u003c\/li\u003e\n\u003cli\u003eRepeat on the opposite side.\u003c\/li\u003e\n\u003cli\u003eSchedule a professional four-wheel alignment immediately after installation to set rear toe to your target specification.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"ISR Performance","offers":[{"title":"Default Title","offer_id":46016783614031,"sku":"ISRIS-RTR-Q60","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/ISR_Rear_Traction_Rods_Infiniti_Q60_Q50.png?v=1783349572","url":"https:\/\/www.blackopsautoworks.com\/products\/isr-is-rtr-q60-rear-traction-rods-infiniti-q60-q50","provider":"Black Ops Auto Works","version":"1.0","type":"link"}