{"product_id":"jxb-land-rover-l322-range-rover-with-later-ford-3-6-4-4-tdv8-and-jaguar-4-2-4-4-5-0-v8-engines-driveshaft-center-support-bearing-carrier","title":"JXB Land Rover L322 Range Rover with Later Ford 3.6\/4.4 TDV8 and Jaguar 4.2\/4.4\/5.0 V8 Engines Driveshaft Center Support Bearing Carrier","description":"\u003ch4\u003eKeep the driveshaft centered when torque loads rise\u003c\/h4\u003e\u003cp\u003eJXB Performance L3222A0 replaces the flexible factory center-support carrier on the verified applications below while retaining the original bearing. The split carrier limits bearing sag and off-center movement to improve driveline alignment and response without requiring driveshaft removal.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eL3222A0 uses a rigid split-carrier design that clamps around the original center support bearing\u003c\/li\u003e\n\u003cli\u003eHelps reduce driveline movement during launches, shifts, and rapid throttle changes\u003c\/li\u003e\n\u003cli\u003eReplaceable Street and Track damper bushings support different NVH priorities\u003c\/li\u003e\n\u003cli\u003eStreet bushings provide greater noise and vibration isolation\u003c\/li\u003e\n\u003cli\u003eTrack bushings are approximately twice as firm as Street bushings\u003c\/li\u003e\n\u003cli\u003eThe original bearing remains serviceable and must be inspected before installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ch5\u003eApplication requirements\u003c\/h5\u003e\u003cp\u003eLater production L322 Range Rovers with Ford and Jaguar engines Ford 3.6 Ford 4.4 TDV8 (not to be confused with BMW 4.4 V8) Jaguar 4.2 V8 Jaguar 4.4 V8 (not to be confused with BMW 4.4 V8) Jaguar 5.0 V8\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eManufacturer Application\u003c\/th\u003e\n\u003cth\u003eRequirements and Exclusions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLater production L322 Range Rovers with Ford and Jaguar engines\u003c\/td\u003e\n\u003ctd\u003eMatch the exact chassis, drivetrain and exclusion stated by JXB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord 3.6\u003c\/td\u003e\n\u003ctd\u003eMatch the exact chassis, drivetrain and exclusion stated by JXB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord 4.4 TDV8 (not to be confused with BMW 4.4 V8)\u003c\/td\u003e\n\u003ctd\u003eMatch the exact chassis, drivetrain and exclusion stated by JXB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJaguar 4.2 V8\u003c\/td\u003e\n\u003ctd\u003eMatch the exact chassis, drivetrain and exclusion stated by JXB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJaguar 4.4 V8 (not to be confused with BMW 4.4 V8)\u003c\/td\u003e\n\u003ctd\u003eMatch the exact chassis, drivetrain and exclusion stated by JXB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJaguar 5.0 V8\u003c\/td\u003e\n\u003ctd\u003eMatch the exact chassis, drivetrain and exclusion stated by JXB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eL3222A0 fitment is limited to the manufacturer-listed applications and restrictions in this table. Confirm the vehicle, drivetrain configuration, and original driveshaft before ordering.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Family\u003c\/td\u003e\n\u003ctd\u003eL3222A0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStreet (Soft, Quieter)\u003c\/td\u003e\n\u003ctd\u003eL3222A0-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrack (Hard, Louder)\u003c\/td\u003e\n\u003ctd\u003eL3222A0-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGive me Both\u003c\/td\u003e\n\u003ctd\u003eL3222A0-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing\u003c\/td\u003e\n\u003ctd\u003eOriginal center support bearing retained\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Method\u003c\/td\u003e\n\u003ctd\u003eTwo-piece carrier clamps around the bearing after removal of the original carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushing Choices\u003c\/td\u003e\n\u003ctd\u003eStreet, Track, or both when offered by the selected variant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne JXB L3222A0 carrier assembly in the selected configuration\u003c\/li\u003e\n\u003cli\u003eThe Street, Track, or combined bushing set represented by the selected variant\u003c\/li\u003e\n\u003cli\u003eApplication-specific carrier hardware supplied with the assembly\u003c\/li\u003e\n\u003cli\u003eA replacement bearing, driveshaft, cutting tool, exhaust hardware, heat shields, and installation labor are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout JXB Performance\u003c\/h4\u003e\u003ch5\u003eManufacturer product information\u003c\/h5\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.jxbperformance.com\/products\/p\/land-rover-l322-range-rover-with-later-ford-36\/44-tdv8-and-jaguar-42\/44\/50-v8-engines-driveshaft-center-support-bearing-carrier-upgrade\"\u003eJXB product details and installation information\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eJXB Performance develops serviceable drivetrain and suspension supports that replace flexible factory structures while retaining application-specific geometry. Its replaceable damper-bushing system separates driveline control from the vibration isolation needed in a street vehicle.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUse only replacement bushings and hardware explicitly listed by JXB for L3222A0\u003c\/li\u003e\n\u003cli\u003eInspect the original center support bearing and driveline joints before installation\u003c\/li\u003e\n\u003cli\u003eDo not substitute a carrier from a related platform or a different driveshaft configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the L3222A0?\u003c\/strong\u003e\u003cp\u003eIt is a split driveshaft center support bearing carrier for the verified applications shown in the Fitment table.\u003c\/p\u003e\u003cstrong\u003eIs a new center support bearing included?\u003c\/strong\u003e\u003cp\u003eNo. The original bearing is retained and must be inspected for serviceability before installation.\u003c\/p\u003e\u003cstrong\u003eMust the driveshaft be removed?\u003c\/strong\u003e\u003cp\u003eNo. JXB states that the split carrier clamps around the original bearing after the factory carrier is cut away.\u003c\/p\u003e\u003cstrong\u003eHow do Street and Track bushings differ?\u003c\/strong\u003e\u003cp\u003eStreet bushings prioritize noise and vibration isolation. Track bushings are approximately twice as firm and may transmit more NVH.\u003c\/p\u003e\u003cstrong\u003eWhat does the combined bushing option include?\u003c\/strong\u003e\u003cp\u003eWhen offered, it includes complete Street and Track bushing sets so the installed stiffness can be changed or mixed.\u003c\/p\u003e\u003cstrong\u003eCan this correct a damaged bearing?\u003c\/strong\u003e\u003cp\u003eNo. A noisy, loose, seized, or otherwise damaged bearing must be serviced before the carrier is installed.\u003c\/p\u003e\u003cstrong\u003eWhat access work is normally required?\u003c\/strong\u003e\u003cp\u003eAccess may require removal or lowering of braces, splash shields, exhaust sections, and heat shields. The exact procedure varies by vehicle.\u003c\/p\u003e\u003cstrong\u003eWhat should be checked after installation?\u003c\/strong\u003e\u003cp\u003eConfirm fastener torque, driveshaft alignment, heat-shield and exhaust clearance, free rotation, and the absence of abnormal vibration.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eConfirm the vehicle, fitment restrictions, and original driveshaft configuration before opening the package.\u003c\/li\u003e\n\u003cli\u003eInspect the original center support bearing and driveline joints; replace damaged components before installing a carrier.\u003c\/li\u003e\n\u003cli\u003eSupport the vehicle and driveshaft safely, then remove only the braces, exhaust sections, and heat shields required for access.\u003c\/li\u003e\n\u003cli\u003eCut away the original carrier without contacting the bearing or driveshaft.\u003c\/li\u003e\n\u003cli\u003eRemove the original support rubber as directed while leaving the molded base layer intact on the bearing.\u003c\/li\u003e\n\u003cli\u003eClamp the new split carrier around the bearing with the selected bushings and supplied hardware.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to current JXB and vehicle specifications, then reinstall every removed component.\u003c\/li\u003e\n\u003cli\u003eVerify alignment, free driveshaft rotation, clearance, and the absence of vibration during a controlled road test.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"JXB Performance","offers":[{"title":"Street (Soft, Quieter)","offer_id":68220218081359,"sku":"L3222A0-S","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Track (Hard, Louder)","offer_id":68220218114127,"sku":"L3222A0-T","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Give me Both!","offer_id":68220218146895,"sku":"L3222A0-B","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/jxb-performance-l3222a0-driveshaft-carrier-hero.webp?v=1794950226","url":"https:\/\/www.blackopsautoworks.com\/products\/jxb-land-rover-l322-range-rover-with-later-ford-3-6-4-4-tdv8-and-jaguar-4-2-4-4-5-0-v8-engines-driveshaft-center-support-bearing-carrier","provider":"Black Ops Auto Works","version":"1.0","type":"link"}