{"product_id":"jxb-subaru-baja-be-bh-outback-2nd-gen-driveshaft-center-support-bearing-carrier","title":"JXB Subaru Baja, BE\/BH Outback (2nd gen) Driveshaft Center Support Bearing Carrier","description":"\u003ch4\u003eKeep the driveshaft centered when torque loads rise\u003c\/h4\u003e\u003cp\u003eJXB Performance SUB07A0 replaces the flexible factory center-support carrier on the verified applications below while retaining the original bearing. The split carrier limits bearing sag and off-center movement to improve driveline alignment and response without requiring driveshaft removal.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSUB07A0 uses a rigid split-carrier design that clamps around the original center support bearing\u003c\/li\u003e\n\u003cli\u003eHelps reduce driveline movement during launches, shifts, and rapid throttle changes\u003c\/li\u003e\n\u003cli\u003eReplaceable Street and Track damper bushings support different NVH priorities\u003c\/li\u003e\n\u003cli\u003eStreet bushings provide greater noise and vibration isolation\u003c\/li\u003e\n\u003cli\u003eTrack bushings are approximately twice as firm as Street bushings\u003c\/li\u003e\n\u003cli\u003eThe original bearing remains serviceable and must be inspected before installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ch5\u003eApplication requirements\u003c\/h5\u003e\u003cp\u003eSubaru Baja (2003-2006) 2nd gen (BE\/BH) Subaru Outback (2000-2004)\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eManufacturer Application\u003c\/th\u003e\n\u003cth\u003eRequirements and Exclusions\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubaru Baja (2003-2006)\u003c\/td\u003e\n\u003ctd\u003eMatch the exact chassis, drivetrain and exclusion stated by JXB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2nd gen (BE\/BH) Subaru Outback (2000-2004)\u003c\/td\u003e\n\u003ctd\u003eMatch the exact chassis, drivetrain and exclusion stated by JXB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eSUB07A0 fitment is limited to the manufacturer-listed applications and restrictions in this table. Confirm the vehicle, drivetrain configuration, and original driveshaft before ordering.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Family\u003c\/td\u003e\n\u003ctd\u003eSUB07A0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStreet (Soft, Quieter)\u003c\/td\u003e\n\u003ctd\u003eSUB07A0-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrack (Hard, Louder)\u003c\/td\u003e\n\u003ctd\u003eSUB07A0-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGive me Both\u003c\/td\u003e\n\u003ctd\u003eSUB07A0-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing\u003c\/td\u003e\n\u003ctd\u003eOriginal center support bearing retained\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Method\u003c\/td\u003e\n\u003ctd\u003eTwo-piece carrier clamps around the bearing after removal of the original carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBushing Choices\u003c\/td\u003e\n\u003ctd\u003eStreet, Track, or both when offered by the selected variant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne JXB SUB07A0 carrier assembly in the selected configuration\u003c\/li\u003e\n\u003cli\u003eThe Street, Track, or combined bushing set represented by the selected variant\u003c\/li\u003e\n\u003cli\u003eApplication-specific carrier hardware supplied with the assembly\u003c\/li\u003e\n\u003cli\u003eA replacement bearing, driveshaft, cutting tool, exhaust hardware, heat shields, and installation labor are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout JXB Performance\u003c\/h4\u003e\u003ch5\u003eManufacturer product information\u003c\/h5\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.jxbperformance.com\/products\/p\/subaru-baja-be\/bh-outback-2nd-gen-driveshaft-center-support-bearing-carrier-upgrade\"\u003eJXB product details and installation information\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eJXB Performance develops serviceable drivetrain and suspension supports that replace flexible factory structures while retaining application-specific geometry. Its replaceable damper-bushing system separates driveline control from the vibration isolation needed in a street vehicle.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUse only replacement bushings and hardware explicitly listed by JXB for SUB07A0\u003c\/li\u003e\n\u003cli\u003eInspect the original center support bearing and driveline joints before installation\u003c\/li\u003e\n\u003cli\u003eDo not substitute a carrier from a related platform or a different driveshaft configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the SUB07A0?\u003c\/strong\u003e\u003cp\u003eIt is a split driveshaft center support bearing carrier for the verified applications shown in the Fitment table.\u003c\/p\u003e\u003cstrong\u003eIs a new center support bearing included?\u003c\/strong\u003e\u003cp\u003eNo. The original bearing is retained and must be inspected for serviceability before installation.\u003c\/p\u003e\u003cstrong\u003eMust the driveshaft be removed?\u003c\/strong\u003e\u003cp\u003eNo. JXB states that the split carrier clamps around the original bearing after the factory carrier is cut away.\u003c\/p\u003e\u003cstrong\u003eHow do Street and Track bushings differ?\u003c\/strong\u003e\u003cp\u003eStreet bushings prioritize noise and vibration isolation. Track bushings are approximately twice as firm and may transmit more NVH.\u003c\/p\u003e\u003cstrong\u003eWhat does the combined bushing option include?\u003c\/strong\u003e\u003cp\u003eWhen offered, it includes complete Street and Track bushing sets so the installed stiffness can be changed or mixed.\u003c\/p\u003e\u003cstrong\u003eCan this correct a damaged bearing?\u003c\/strong\u003e\u003cp\u003eNo. A noisy, loose, seized, or otherwise damaged bearing must be serviced before the carrier is installed.\u003c\/p\u003e\u003cstrong\u003eWhat access work is normally required?\u003c\/strong\u003e\u003cp\u003eAccess may require removal or lowering of braces, splash shields, exhaust sections, and heat shields. The exact procedure varies by vehicle.\u003c\/p\u003e\u003cstrong\u003eWhat should be checked after installation?\u003c\/strong\u003e\u003cp\u003eConfirm fastener torque, driveshaft alignment, heat-shield and exhaust clearance, free rotation, and the absence of abnormal vibration.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eConfirm the vehicle, fitment restrictions, and original driveshaft configuration before opening the package.\u003c\/li\u003e\n\u003cli\u003eInspect the original center support bearing and driveline joints; replace damaged components before installing a carrier.\u003c\/li\u003e\n\u003cli\u003eSupport the vehicle and driveshaft safely, then remove only the braces, exhaust sections, and heat shields required for access.\u003c\/li\u003e\n\u003cli\u003eCut away the original carrier without contacting the bearing or driveshaft.\u003c\/li\u003e\n\u003cli\u003eRemove the original support rubber as directed while leaving the molded base layer intact on the bearing.\u003c\/li\u003e\n\u003cli\u003eClamp the new split carrier around the bearing with the selected bushings and supplied hardware.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to current JXB and vehicle specifications, then reinstall every removed component.\u003c\/li\u003e\n\u003cli\u003eVerify alignment, free driveshaft rotation, clearance, and the absence of vibration during a controlled road test.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"JXB Performance","offers":[{"title":"Street (Soft, Quieter)","offer_id":68220286107727,"sku":"SUB07A0-S","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Track (Hard, Louder)","offer_id":68220286140495,"sku":"SUB07A0-T","price":299.99,"currency_code":"USD","in_stock":true},{"title":"Give me Both!","offer_id":68220286173263,"sku":"SUB07A0-B","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/jxb-performance-sub07a0-driveshaft-carrier-hero.webp?v=1794950406","url":"https:\/\/www.blackopsautoworks.com\/products\/jxb-subaru-baja-be-bh-outback-2nd-gen-driveshaft-center-support-bearing-carrier","provider":"Black Ops Auto Works","version":"1.0","type":"link"}