{"product_id":"kooks-2016-chevrolet-camaro-ss-o2-extension-kit-10in-front-left-ext-wire-8in-rear-left-ext-wire","title":"Kooks 2016 Chevrolet Camaro SS O2 Extension Kit - 10in Front Left Ext Wire - 8in Rear Left Ext Wire","description":"\u003ch4\u003ePlug and Play O2 Sensor Extension Kit Designed Specifically for the 2016 Camaro SS\u003c\/h4\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eCAS-104326\u003c\/strong\u003e is an O2 extension kit engineered specifically for the 2016 Chevrolet Camaro SS, providing the exact wire lengths needed to properly relocate O2 sensors after long tube header installation on this generation Camaro. The kit includes a 10 inch front left extension and an 8 inch rear left extension, sized to bridge the gap between the factory O2 sensor harness connectors and the sensor positions on Kooks long tube headers without excess wire bundled under the hood or along the exhaust path. This is a plug and play solution that uses factory compatible connectors on both ends.\u003c\/p\u003e\n\n\u003cp\u003eInstalling long tube headers on the 2016 Camaro SS without addressing the O2 sensor wiring leads to stretched harness connections, sensor positioning errors, and persistent check engine lights from the oxygen sensor circuit. The \u003cstrong\u003eCAS-104326\u003c\/strong\u003e eliminates all of these issues with a direct fit solution designed by people who build the headers that require it. No splicing, no soldering, and no guessing about correct wire length are involved. Order this kit alongside your Kooks Camaro SS long tube headers and have every component needed for a complete, professional installation on hand before you begin the job.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eVehicle specific design for the 2016 Chevrolet Camaro SS\u003c\/li\u003e\n  \u003cli\u003eIncludes 10 inch front left O2 extension wire\u003c\/li\u003e\n  \u003cli\u003eIncludes 8 inch rear left O2 extension wire\u003c\/li\u003e\n  \u003cli\u003eFactory compatible connectors for plug and play installation\u003c\/li\u003e\n  \u003cli\u003eEliminates the need for splicing or custom wiring\u003c\/li\u003e\n  \u003cli\u003ePrevents check engine lights caused by stretched or improperly routed O2 wiring\u003c\/li\u003e\n  \u003cli\u003eDesigned for use with Kooks long tube headers on the 2016 Camaro SS\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x 10 inch front left O2 sensor extension harness\u003c\/li\u003e\n  \u003cli\u003e1 x 8 inch rear left O2 sensor extension harness\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePart Number (MPN)\u003c\/td\u003e\n\u003ctd\u003eCAS-104326\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eContact us for UPC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003e2016 Chevrolet Camaro SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFront Left Extension Length\u003c\/td\u003e\n\u003ctd\u003e10 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRear Left Extension Length\u003c\/td\u003e\n\u003ctd\u003e8 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eFactory Compatible Plug and Play\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUse With\u003c\/td\u003e\n\u003ctd\u003eKooks Long Tube Headers, Camaro SS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e2 harnesses per kit\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat vehicle does this extension kit fit?\u003c\/strong\u003e\u003cbr\u003e\nThis extension kit is designed specifically for the 2016 Chevrolet Camaro SS. It is not a universal fitment and is not confirmed for other model years or trim levels without separate verification.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy does the front and rear extension have different lengths?\u003c\/strong\u003e\u003cbr\u003e\nThe front left and rear left O2 sensors are located at different distances from their factory harness connectors relative to the new sensor positions created by long tube headers. The 10 inch and 8 inch lengths are engineered to match those specific distances on the 2016 Camaro SS without any excess slack.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes this extension kit require splicing or soldering?\u003c\/strong\u003e\u003cbr\u003e\nNo. This extension kit uses factory compatible connectors on both ends. Installation involves unplugging the existing O2 sensor harness connector, plugging the extension in line, and plugging the other end to the sensor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill this extension kit trigger a check engine light?\u003c\/strong\u003e\u003cbr\u003e\nWhen correctly installed with an appropriate tune after header installation, this extension kit will not trigger a check engine light. The extension maintains the full electrical integrity of the O2 sensor circuit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need both extensions or just one?\u003c\/strong\u003e\u003cbr\u003e\nThe kit includes both the front left and rear left extensions. Both are required for a complete O2 sensor wiring installation on the Kooks long tube header application for the 2016 Camaro SS.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this extension kit compatible with the 2016 Camaro SS with the automatic transmission?\u003c\/strong\u003e\u003cbr\u003e\nYes. The O2 sensor extension kit is not dependent on transmission type and applies to all 2016 Camaro SS variants with the LT1 V8 engine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan this kit be used on a 2017 or later Camaro SS?\u003c\/strong\u003e\u003cbr\u003e\nThis extension kit is specified for the 2016 Camaro SS. For other model years, verify with Kooks whether this kit or a different part number applies to your specific vehicle before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat happens if I run my O2 sensors without extensions after installing long tube headers?\u003c\/strong\u003e\u003cbr\u003e\nThe factory harness may not reach the sensors in the new positions, causing stretched connections, poor electrical contact, and inaccurate O2 sensor readings. This leads to fueling issues and check engine lights that will persist until the wiring is properly extended.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShould I install this extension kit before or after tuning?\u003c\/strong\u003e\u003cbr\u003e\nInstall this extension kit before tuning. The O2 sensor circuit must be properly connected for the ECU tune to read the sensors accurately and calibrate fueling correctly.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this kit made by Kooks?\u003c\/strong\u003e\u003cbr\u003e\nYes. This extension kit is a Kooks accessory produced to support proper installation of Kooks headers on the 2016 Camaro SS.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n  \u003cli\u003eConfirm Kooks long tube headers are fully installed on the 2016 Camaro SS before addressing O2 sensor wiring.\u003c\/li\u003e\n  \u003cli\u003eWith the ignition off, locate the front left O2 sensor factory harness connector.\u003c\/li\u003e\n  \u003cli\u003eDisconnect the factory harness connector from the O2 sensor.\u003c\/li\u003e\n  \u003cli\u003ePlug the 10 inch extension (front left) between the factory harness and the O2 sensor.\u003c\/li\u003e\n  \u003cli\u003eRoute the extension wire away from hot exhaust surfaces and secure as needed.\u003c\/li\u003e\n  \u003cli\u003eRepeat the same process for the rear left sensor using the 8 inch extension.\u003c\/li\u003e\n  \u003cli\u003eVerify all connections are fully seated before starting the vehicle.\u003c\/li\u003e\n  \u003cli\u003eAfter a professional ECU tune, verify no O2 sensor related check engine lights are present.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch4\u003eProp 65 Warning\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals known to the State of California to cause cancer, birth defects or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\" target=\"_blank\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Kooks Headers","offers":[{"title":"Default Title","offer_id":41008880451663,"sku":"KSHCAS-104326","price":68.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/products\/kooks-cas104326-harness_01.jpg?v=1764344001","url":"https:\/\/www.blackopsautoworks.com\/products\/kooks-2016-chevrolet-camaro-ss-o2-extension-kit-10in-front-left-ext-wire-8in-rear-left-ext-wire","provider":"Black Ops Auto Works","version":"1.0","type":"link"}