{"product_id":"kooks-universal-3in-ss-clamp","title":"Kooks JI-TAS300 3 in. Band Clamp for Slip Joint Connections Stainless Steel","description":"\u003ch4\u003e3 Inch Stainless Band Clamp That Secures Slip Joint Exhaust Connections Without Leaking\u003c\/h4\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eJI-TAS300\u003c\/strong\u003e is a 3 inch stainless steel band clamp for slip joint exhaust connections, providing a clean, secure, and leak resistant method of joining two 3 inch exhaust pipe slip joints without welding. Slip joints are a common feature in performance exhaust systems because they allow sections of the exhaust to be assembled, adjusted, and disassembled during installation or maintenance. A quality band clamp at each slip joint is what determines whether that joint stays sealed and tight in service or develops leaks and noise over time. This band clamp uses T304 stainless steel to provide the corrosion resistance and clamping strength that a permanent exhaust joint demands.\u003c\/p\u003e\n\n\u003cp\u003eFor builders using Kooks modular exhaust components, race car builders, or anyone assembling a 3 inch performance exhaust system with slip joint connections, the \u003cstrong\u003eJI-TAS300\u003c\/strong\u003e is the hardware item that closes out each joint properly. It fits cleanly over standard 3 inch slip joint overlaps and tightens to draw the pipes together into a sealed connection. The stainless construction means it will not rust or deteriorate in the exposed undercarriage environment, and the band clamp design allows the joint to be opened again for maintenance without destroying the hardware.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 3 inch slip joint exhaust connections\u003c\/li\u003e\n  \u003cli\u003eT304 stainless steel construction for corrosion resistance and long service life\u003c\/li\u003e\n  \u003cli\u003eBand clamp design provides even clamping force around the full pipe circumference\u003c\/li\u003e\n  \u003cli\u003eAllows slip joints to be opened and reseated for maintenance without replacing hardware\u003c\/li\u003e\n  \u003cli\u003eSeals the slip joint against exhaust gas leaks\u003c\/li\u003e\n  \u003cli\u003eCompatible with Kooks 3 inch exhaust system components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x this band clamp 3 inch stainless steel band clamp for slip joint connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePart Number (MPN)\u003c\/td\u003e\n\u003ctd\u003eJI-TAS300\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eContact us for UPC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePipe Diameter\u003c\/td\u003e\n\u003ctd\u003e3 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eClamp Type\u003c\/td\u003e\n\u003ctd\u003eBand Clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnection Type\u003c\/td\u003e\n\u003ctd\u003eSlip Joint\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eT304 Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eUniversal (3 Inch Slip Joint Applications)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is this band clamp used for?\u003c\/strong\u003e\u003cbr\u003e\nThis band clamp is a band clamp used to secure 3 inch slip joint exhaust connections. It clamps over the overlapping pipe ends at a slip joint to hold the connection together and seal it against exhaust gas leaks.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is a slip joint in an exhaust system?\u003c\/strong\u003e\u003cbr\u003e\nA slip joint is where one pipe section slides over or into another, with overlap that allows the joint to be assembled without welding. A band clamp draws the outer pipe against the inner to seal the connection. Slip joints are commonly used in modular exhaust systems for easier installation and maintenance access.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat pipe diameter does this band clamp fit?\u003c\/strong\u003e\u003cbr\u003e\nThis band clamp is sized for 3 inch exhaust pipe slip joints. Both the inner and outer pipe at the joint should be 3 inch nominal diameter.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan this band clamp be reused after removing the exhaust?\u003c\/strong\u003e\u003cbr\u003e\nYes. This band clamp band clamp can typically be reused as long as the band and hardware are not damaged during removal. Inspect the clamp for cracks, distortion, or stripped threads before reusing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this band clamp better than a U bolt clamp?\u003c\/strong\u003e\u003cbr\u003e\nBand clamps provide more even clamping force around the full pipe circumference than U bolt clamps, which concentrate clamping force at two points. This makes band clamps more effective at sealing slip joints against exhaust gas leaks.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill this band clamp hold a slip joint permanently without welding?\u003c\/strong\u003e\u003cbr\u003e\nThis band clamp provides a reliable seal and connection when properly torqued. It is a serviceable connection that can be loosened for disassembly. If a permanent non serviceable connection is required, welding is the alternative.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this band clamp compatible with non Kooks exhaust components?\u003c\/strong\u003e\u003cbr\u003e\nYes. Any 3 inch slip joint exhaust connection can use this band clamp, regardless of the component brand.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow tight should I torque this band clamp?\u003c\/strong\u003e\u003cbr\u003e\nTighten to the point where the slip joint is fully drawn together and the clamp is firm without distorting the pipe. Refer to any torque specification provided with Kooks exhaust components for guidance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs this band clamp sold individually?\u003c\/strong\u003e\u003cbr\u003e\nYes. Order as many as you have slip joint connections in your exhaust system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between this band clamp and JI-TAS250?\u003c\/strong\u003e\u003cbr\u003e\nThis band clamp is for 3 inch slip joints and the JI-TAS250 is for 2.5 inch slip joints. Both are T304 stainless band clamps for the same type of connection.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n  \u003cli\u003eSlide one pipe end into the other to form the slip joint, ensuring adequate overlap for a sealed connection.\u003c\/li\u003e\n  \u003cli\u003eSlide this band clamp band clamp over the outer pipe so it sits centered over the overlapping section.\u003c\/li\u003e\n  \u003cli\u003eDraw the clamp snug by hand, then use the appropriate wrench to tighten the clamp hardware.\u003c\/li\u003e\n  \u003cli\u003eTighten until the slip joint is fully drawn together and the clamp cannot be rotated on the pipe.\u003c\/li\u003e\n  \u003cli\u003eAvoid over tightening, which can distort the pipe or strip the clamp threads.\u003c\/li\u003e\n  \u003cli\u003eStart the engine and check for exhaust leaks at the slip joint after the first heat cycle.\u003c\/li\u003e\n  \u003cli\u003eRe inspect and tighten if needed after the initial heat cycle.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch4\u003eProp 65 Warning\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including Chromium and Nickel, which are known to the State of California to cause cancer, birth defects or reproductive harm. For more information go to \u003ca href=\"https:\/\/www.p65warnings.ca.gov\" target=\"_blank\" rel=\"nofollow\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e","brand":"Kooks Headers","offers":[{"title":"Default Title","offer_id":39739891875919,"sku":"KSHJI-TAS300","price":11.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/kooks-jitas300-clamp_01.jpg?v=1764602522","url":"https:\/\/www.blackopsautoworks.com\/products\/kooks-universal-3in-ss-clamp","provider":"Black Ops Auto Works","version":"1.0","type":"link"}