{"product_id":"mag24214-magnaflow-direct-fit-catalytic-converter-2003-2011-saab-9-3-2-0l","title":"Magnaflow Conv DF 03-08 Saab 9-3 2.0L","description":"\u003ch4\u003eKeep Your Saab 9-3 Running Clean with a Direct-Fit Catalytic Converter\u003c\/h4\u003e\u003cp\u003eThe Magnaflow MAG24214 is a direct-fit catalytic converter engineered specifically for the 2003-2011 Saab 9-3 equipped with the 2.0L engine. Designed to meet or exceed Federal EPA emissions standards for OBDII-registered vehicles, the MAG24214 replicates the OE spun body design with free-flowing mandrel-bent stainless steel construction and a single laser fusion weld that minimizes the risk of exhaust leaks. No cutting or welding is required for installation.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMAG24214 is an EPA-compliant direct-fit replacement for the 2003-2011 Saab 9-3 2.0L\u003c\/li\u003e\n\u003cli\u003eReplicates OE spun body design for precise fitment verified with 3D scanning technology\u003c\/li\u003e\n\u003cli\u003eMandrel-bent free-flowing tubing for improved exhaust flow versus collapsed OE replacement units\u003c\/li\u003e\n\u003cli\u003eSingle laser fusion weld construction reduces the risk of exhaust leaks at the housing joint\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant stainless steel construction for long service life\u003c\/li\u003e\n\u003cli\u003eCompact, low-mass design provides greater thermal efficiency for faster catalyst light-off\u003c\/li\u003e\n\u003cli\u003eNo cutting, welding, or modification required for installation\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds Federal EPA emissions requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2011\u003c\/td\u003e\n\u003ctd\u003eSaab\u003c\/td\u003e\n\u003ctd\u003e9-3\u003c\/td\u003e\n\u003ctd\u003eLinear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2011\u003c\/td\u003e\n\u003ctd\u003eSaab\u003c\/td\u003e\n\u003ctd\u003e9-3\u003c\/td\u003e\n\u003ctd\u003eArc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2011\u003c\/td\u003e\n\u003ctd\u003eSaab\u003c\/td\u003e\n\u003ctd\u003e9-3\u003c\/td\u003e\n\u003ctd\u003eAero\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eMAG24214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eMagnaflow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003e2003-2011 Saab 9-3 2.0L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eDirect-Fit Catalytic Converter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Design\u003c\/td\u003e\n\u003ctd\u003eSpun Body (OE Replication)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeld Type\u003c\/td\u003e\n\u003ctd\u003eSingle Laser Fusion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmissions Compliance\u003c\/td\u003e\n\u003ctd\u003eFederal \/ EPA OBDII\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo Cut, No Weld Direct-Fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e841380095572\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\u003cli\u003e1x Magnaflow MAG24214 direct-fit catalytic converter\u003c\/li\u003e\u003c\/ul\u003e\n\n\u003ch4\u003eAbout Magnaflow\u003c\/h4\u003e\n\u003cp\u003eMagnaflow has been a leader in performance and OE-grade exhaust products since 1981. Their direct-fit catalytic converter line uses state-of-the-art 3D scanning and OE replication processes to ensure precise fitment and long-term emissions compliance. Every MAG24214 unit is built to Federal EPA standards and undergoes quality control to Magnaflow's metrology department specifications.\u003c\/p\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWill the MAG24214 clear the check engine light on my 2003-2011 Saab 9-3?\u003c\/strong\u003e\u003cp\u003eThe MAG24214 is engineered to meet or exceed Federal EPA OBD II emissions standards. In most cases, a properly functioning catalytic converter replacement will resolve emissions-related check engine codes on the 2003-2011 Saab 9-3.\u003c\/p\u003e\n\u003cstrong\u003eDoes the MAG24214 require cutting or welding to install?\u003c\/strong\u003e\u003cp\u003eNo. The MAG24214 is a direct-fit design that bolts directly into the factory exhaust position on the 2003-2011 Saab 9-3 2.0L without any cutting, welding, or custom fabrication.\u003c\/p\u003e\n\u003cstrong\u003eIs the MAG24214 legal for use in California?\u003c\/strong\u003e\u003cp\u003eThe MAG24214 meets Federal EPA OBDII emissions requirements but is intended for use in Federal-emissions states. California CARB-compliant converters require a separate CARB-approved unit. Check your state's emissions requirements before purchasing.\u003c\/p\u003e\n\u003cstrong\u003eWhat is the OE spun body design that Magnaflow uses in the MAG24214?\u003c\/strong\u003e\u003cp\u003eMagnaflow replicates the factory OE production method of spinning the converter body to create an exact-diameter match to the original equipment part. This ensures a precise fit and minimizes the risk of fitment-related exhaust leaks compared to generic universal converters.\u003c\/p\u003e\n\u003cstrong\u003eDoes the MAG24214 fit Saab 9-3 models with automatic and manual transmissions?\u003c\/strong\u003e\u003cp\u003eYes. The MAG24214 fitment is based on the engine and exhaust configuration, not the transmission. It fits both automatic and manual transmission Saab 9-3 models in the applicable year range.\u003c\/p\u003e\n\u003cstrong\u003eHow is Magnaflow's 3D scanning used to ensure MAG24214 fitment?\u003c\/strong\u003e\u003cp\u003eMagnaflow's metrology department uses 3D scanning during R\u0026amp;D to map the exact geometry of the factory exhaust system. This ensures the MAG24214 replicates OE inlet, outlet, and bracket dimensions for a no-modification direct fit.\u003c\/p\u003e\n\u003cstrong\u003eDoes the MAG24214 come with gaskets or hardware?\u003c\/strong\u003e\u003cp\u003eThe MAG24214 unit does not include gaskets or hardware in the box. It is recommended to replace the exhaust gaskets and any worn hardware at the time of installation for a leak-free fit.\u003c\/p\u003e\n\u003cstrong\u003eHow long does installation take for the MAG24214 on the Saab 9-3?\u003c\/strong\u003e\u003cp\u003eFor a technician familiar with exhaust work, installation typically takes 1 to 2 hours. Corroded or seized fasteners may extend the job significantly. It is recommended to use penetrating lubricant on fasteners before attempting removal on older vehicles.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eAllow the exhaust system to cool completely before beginning\u003c\/li\u003e\n\u003cli\u003eRaise and safely support the vehicle for exhaust access\u003c\/li\u003e\n\u003cli\u003eApply penetrating lubricant to all exhaust fasteners and allow to soak\u003c\/li\u003e\n\u003cli\u003eRemove the O2 sensor(s) from the original catalytic converter and set aside\u003c\/li\u003e\n\u003cli\u003eUnbolt the original converter from the flanges at both inlet and outlet connections\u003c\/li\u003e\n\u003cli\u003eRemove the old converter and compare dimensions with the MAG24214 before installing\u003c\/li\u003e\n\u003cli\u003eInstall the MAG24214 in position and finger-tighten the flange bolts\u003c\/li\u003e\n\u003cli\u003eTransfer and reinstall the O2 sensor(s) into the appropriate bungs on the MAG24214\u003c\/li\u003e\n\u003cli\u003eTorque all exhaust fasteners to specification and check for leaks after startup\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Magnaflow","offers":[{"title":"Default Title","offer_id":46034540494927,"sku":"MAG24214","price":333.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/Magnaflow_Direct-Fit_Cat_Converter_2003-2011_Saab_9-3.jpg?v=1783630649","url":"https:\/\/www.blackopsautoworks.com\/products\/mag24214-magnaflow-direct-fit-catalytic-converter-2003-2011-saab-9-3-2-0l","provider":"Black Ops Auto Works","version":"1.0","type":"link"}