{"product_id":"magnaflow-bre-exhaust-kit-05-12-nissan-pathfinder","title":"BRExhaust Direct-Fit Exhaust System Kit 05-12 Nissan Pathfinder 4.0L","description":"\u003ch4\u003eEverything Behind the Last Converter on a V6 Pathfinder, in One Box\u003c\/h4\u003e\u003cp\u003eBRExhaust 106-0066 replaces the complete exhaust from behind the last catalytic converter on the 2005-2012 Nissan Pathfinder with the 4.0L V6. It is a two-muffler aluminized steel system on 2.25 in mandrel-bent piping, supplied as an adjustable multi-piece kit that bolts around the axle and crossmembers without any fabrication.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eComplete mandrel-bent replacement of everything from behind or near the last catalytic converter rearward.\u003c\/li\u003e\n\u003cli\u003eBolt-on adjustable multi-piece design that installs around axles, crossmembers and brackets with no fabrication.\u003c\/li\u003e\n\u003cli\u003eLeaves all factory emissions equipment in place.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant aluminized steel for both the pipes and the mufflers.\u003c\/li\u003e\n\u003cli\u003eTwo-muffler layout: a 16.25 in main muffler and a small 8 in resonator-sized second unit.\u003c\/li\u003e\n\u003cli\u003eHangers and a spring bolt kit are both included.\u003c\/li\u003e\n\u003cli\u003eThe BRExhaust 106-0066 carton ships with the clamps, gaskets and fasteners needed for the job.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eVehicle\u003c\/th\u003e\n\u003cth\u003eEngine and years\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003eNissan Pathfinder\u003c\/td\u003e\n\u003ctd\u003e2005-2012, 4.0L V6\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eEngine matters on this platform, so confirm the 4.0L V6 before ordering.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBRExhaust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMPN\u003c\/td\u003e\n\u003ctd\u003e106-0066\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eDirect-Fit Exhaust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMain piping diameter\u003c\/td\u003e\n\u003ctd\u003e2.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMuffler quantity\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront muffler\u003c\/td\u003e\n\u003ctd\u003e4.5 in H x 16.25 in L x 9.75 in W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear muffler\u003c\/td\u003e\n\u003ctd\u003e3 in H x 8 in L x 3 in W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePipe and muffler material\u003c\/td\u003e\n\u003ctd\u003eAluminized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMuffler finish\u003c\/td\u003e\n\u003ctd\u003eAluminized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall finish\u003c\/td\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExit style\u003c\/td\u003e\n\u003ctd\u003eOEM location\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet type\u003c\/td\u003e\n\u003ctd\u003eBolt-on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClamping\u003c\/td\u003e\n\u003ctd\u003eU-bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHangers included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpring bolt kit\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCatalytic converter included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting bracket\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-year unlimited-mileage construction warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne BRExhaust 106-0066 direct-fit exhaust system kit with all pipes and both mufflers\u003c\/li\u003e\n\u003cli\u003eOne 2.125 in U-bolt clamp\u003c\/li\u003e\n\u003cli\u003eThree 2.25 in U-bolt clamps\u003c\/li\u003e\n\u003cli\u003eTwo 2-bolt gaskets\u003c\/li\u003e\n\u003cli\u003eFour bolts and four nuts\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout BRExhaust\u003c\/h4\u003e\u003cp\u003eBRExhaust is MagnaFlow's OE-replacement exhaust brand: aluminized direct-fit systems built to put a rusted-out factory exhaust back to standard rather than to change how the vehicle sounds. Every kit in the line is shipped as multiple pieces so it can be threaded around the chassis and adjusted before the clamps are tightened, and 106-0066 follows the original Pathfinder routing over the rear axle.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/magnaflow-converter-direct-fit-05-12-nissan-pathfinder-4-0l-05-15-nissan-xterra-4-0l\"\u003eMagnaFlow direct-fit catalytic converter for 05-12 Nissan Pathfinder 4.0L\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhich section of the exhaust does this kit replace?\u003c\/strong\u003e\u003cp\u003eIt picks up behind the last catalytic converter and continues rearward, so the converters and everything ahead of them stay on the truck.\u003c\/p\u003e\u003cstrong\u003eWill it change the exhaust note?\u003c\/strong\u003e\u003cp\u003eIt is an OE-replacement design in aluminized steel with two mufflers, so the intent is to restore the factory sound rather than to make the vehicle louder.\u003c\/p\u003e\u003cstrong\u003eDoes it include a catalytic converter?\u003c\/strong\u003e\u003cp\u003eNo. The kit starts behind or near the last converter and leaves all emissions equipment in place.\u003c\/p\u003e\u003cstrong\u003eAre hangers supplied?\u003c\/strong\u003e\u003cp\u003eYes, this kit includes hangers and a spring bolt kit, which is not true of every kit in the BRExhaust range.\u003c\/p\u003e\u003cstrong\u003eDo I need to cut or weld anything?\u003c\/strong\u003e\u003cp\u003eNo. The multi-piece design bolts and clamps together and is adjusted in place before final tightening.\u003c\/p\u003e\u003cstrong\u003eWhat size is the main piping?\u003c\/strong\u003e\u003cp\u003e2.25 in, mandrel bent to keep the bore consistent through the bends.\u003c\/p\u003e\u003cstrong\u003eHow many mufflers are in the system?\u003c\/strong\u003e\u003cp\u003eTwo, a 16.25 in main muffler and a smaller 8 in unit.\u003c\/p\u003e\u003cstrong\u003eIs aluminized steel going to rust?\u003c\/strong\u003e\u003cp\u003eAluminized steel is corrosion resistant rather than corrosion proof. It is the same class of material used on most factory systems.\u003c\/p\u003e\u003cstrong\u003eWhat warranty applies?\u003c\/strong\u003e\u003cp\u003eA two-year unlimited-mileage construction warranty.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eLet the exhaust cool completely, then raise the vehicle on a lift or rated stands with room to work under the rear axle.\u003c\/li\u003e\n\u003cli\u003eSoak the factory flange fasteners and hanger isolators with penetrating oil before attempting removal.\u003c\/li\u003e\n\u003cli\u003eSupport the old system, disconnect it at the converter flange, and free each hanger from its isolator working front to rear.\u003c\/li\u003e\n\u003cli\u003eLay the new pieces out on the floor in order and compare them against the old system before lifting anything into place.\u003c\/li\u003e\n\u003cli\u003eFit the front pipe to the converter flange with a new 2-bolt gasket and start the bolts by hand.\u003c\/li\u003e\n\u003cli\u003eWork rearward, sliding each joint together with a U-bolt clamp loosely fitted and seating each hanger into its isolator.\u003c\/li\u003e\n\u003cli\u003eRoute the system around the axle and crossmembers and adjust the slip joints for clearance to the floor pan, spare tyre and fuel lines.\u003c\/li\u003e\n\u003cli\u003eTighten the flange bolts, then tighten the U-bolt clamps front to rear, and confirm the tailpipe sits in the OEM exit position.\u003c\/li\u003e\n\u003cli\u003eStart the engine, check every joint for leaks, then drive and re-check the clamps once the system has been through a full heat cycle. MagnaFlow states professional installation is always recommended for this product family.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Magnaflow","offers":[{"title":"Default Title","offer_id":46371847438415,"sku":"MAG106-0066","price":336.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/brexhaust-106-0066-direct-fit-exhaust-kit-pathfinder-01.jpg?v=1786319850","url":"https:\/\/www.blackopsautoworks.com\/products\/magnaflow-bre-exhaust-kit-05-12-nissan-pathfinder","provider":"Black Ops Auto Works","version":"1.0","type":"link"}