{"product_id":"ngk-8115-spark-plug-wire-set-1979-1983-nissan-200sx","title":"NGK Nissan 200SX 1983-1979 Spark Plug Wire Set","description":"\u003ch4\u003eOEM-Replacement Spark Plug Wire Set Built for 1979-1983 Nissan 200SX Reliability\u003c\/h4\u003e\u003cp\u003eThe NGK 8115 is a factory-spec spark plug wire set engineered specifically for the 1979-1983 Nissan 200SX. Designed to restore ignition performance and eliminate misfires caused by cracked, carbon-tracked, or high-resistance factory wiring, NGK 8115 delivers accurate spark timing from distributor to plug with minimal energy loss. Each wire is cut and terminated to factory length for a no-trim installation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eVehicle-specific design for 1979-1983 Nissan 200SX, direct OEM replacement\u003c\/li\u003e\n\u003cli\u003eSpiral-wound suppression core reduces RFI interference with modern electronics\u003c\/li\u003e\n\u003cli\u003eSilicone insulation withstands underhood heat, oil, and chemical exposure\u003c\/li\u003e\n\u003cli\u003eFactory-length pre-terminated wires install without cutting or re-terminating\u003c\/li\u003e\n\u003cli\u003eBoots seal tightly to plugs and distributor cap to prevent moisture intrusion\u003c\/li\u003e\n\u003cli\u003eLow-resistance core maintains consistent spark energy under all RPM ranges\u003c\/li\u003e\n\u003cli\u003eComplete set covers all cylinders for a full ignition tune-up\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1979-1983\u003c\/td\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003e200SX\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number (MPN)\u003c\/td\u003e\n\u003ctd\u003eNGK 8115\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Type\u003c\/td\u003e\n\u003ctd\u003eSpark Plug Wire Set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore Type\u003c\/td\u003e\n\u003ctd\u003eSpiral suppression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation\u003c\/td\u003e\n\u003ctd\u003eSilicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003e1979-1983 Nissan 200SX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eComplete set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e087295081158\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eComplete NGK 8115 spark plug wire set (all cylinders)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eAbout NGK\u003c\/h4\u003e\u003cp\u003eNGK Spark Plugs has manufactured ignition components since 1936 and is the OEM supplier to virtually every major automaker worldwide. Their spark plug wire sets are engineered to factory specifications and tested for resistance, insulation integrity, and boot retention before leaving the production line.\u003c\/p\u003e\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\u003cstrong\u003eDoes the NGK 8115 fit all trim levels of the 1979-1983 Nissan 200SX?\u003c\/strong\u003e\u003cp\u003eThe NGK 8115 wire set is designed for the 1979-1983 Nissan 200SX. Confirm your specific engine displacement before ordering, as different engine variants may have different plug wire routing and connector styles.\u003c\/p\u003e\u003cstrong\u003eHow do I know if my spark plug wires need replacing on my 200SX?\u003c\/strong\u003e\u003cp\u003eCommon symptoms of failing ignition wires include rough idle, misfires under acceleration, poor fuel economy, a visible crack or carbon tracking on the wire insulation, or a resistance reading above 10,000 ohms per foot with a multimeter.\u003c\/p\u003e\u003cstrong\u003eCan I replace spark plug wires one at a time on my Nissan 200SX?\u003c\/strong\u003e\u003cp\u003eIt is best practice to replace all wires at the same time using the NGK 8115 complete set. Mixing old and new wires can produce uneven resistance across cylinders and complicate misfire diagnosis.\u003c\/p\u003e\u003cstrong\u003eWhat is the resistance specification for NGK 8115 spark plug wires?\u003c\/strong\u003e\u003cp\u003eNGK designs their suppression-core wires to maintain low and consistent resistance per foot. Exact values are available in the NGK technical data sheet. As a general rule, any wire reading above 10,000 ohms per foot should be replaced.\u003c\/p\u003e\u003cstrong\u003eWill the NGK 8115 reduce radio frequency interference in my 200SX?\u003c\/strong\u003e\u003cp\u003eYes. The spiral-wound suppression core in the NGK 8115 is designed to suppress electromagnetic interference that can disrupt radio reception and modern vehicle electronics without sacrificing ignition voltage.\u003c\/p\u003e\u003cstrong\u003eHow long do spark plug wires typically last on a classic Nissan 200SX?\u003c\/strong\u003e\u003cp\u003eUnder normal conditions, quality suppression-core wires can last 30,000 to 60,000 miles. On a classic vehicle, age and heat cycling of the insulation are often the primary failure modes regardless of mileage.\u003c\/p\u003e\u003cstrong\u003eAre the boots on the NGK 8115 compatible with stock distributor cap terminals?\u003c\/strong\u003e\u003cp\u003eYes. The NGK 8115 is engineered as a direct replacement for the 1979-1983 Nissan 200SX and terminates to match the OEM distributor cap and plug connector styles.\u003c\/p\u003e\u003cstrong\u003eShould I replace spark plugs at the same time as the wires?\u003c\/strong\u003e\u003cp\u003eIt is strongly recommended to replace plugs and wires together for the most complete ignition tune-up. Worn plugs with high firing voltage requirements can accelerate degradation of new wires.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003ePark the vehicle on a level surface, turn off the engine, and allow it to cool completely.\u003c\/li\u003e\n\u003cli\u003eLabel each original wire or photograph the routing before removal to ensure correct reinstallation order.\u003c\/li\u003e\n\u003cli\u003eRemove one wire at a time by pulling firmly on the boot, not the wire itself, to avoid damaging the terminal.\u003c\/li\u003e\n\u003cli\u003eInstall each NGK 8115 wire by routing it identically to the original, pressing each boot firmly onto the spark plug until it clicks or seats fully.\u003c\/li\u003e\n\u003cli\u003eConnect the distributor end of each wire to the matching cap tower.\u003c\/li\u003e\n\u003cli\u003eStart the engine and verify smooth idle with no misfire.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":46027621564495,"sku":"NGK8115","price":42.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/NGK_Spark_Plug_Wire_Set_1979-1983_Nissan_200SX.png?v=1783526567","url":"https:\/\/www.blackopsautoworks.com\/products\/ngk-8115-spark-plug-wire-set-1979-1983-nissan-200sx","provider":"Black Ops Auto Works","version":"1.0","type":"link"}