MM Perf. Intercooler Kit: Evo X 08+

Vendor: MishiMoto

Available: In stock

SKU: MMINT-EVO-10KSL

$ 975.00


•Direct fit for the 2008+ Mitsubishi Lancer Evolution X
•10 whp and 10 tq bolt-on power increase
•Efficient 3.5" thick bar-and-plate core provides optimal heat dissipation and low AITs
•Full aluminum cast end tanks provide increased durability and smooth, uninterrupted airflow
•Strategically designed fins for minimal pressure loss
•Substantial core volume will support vehicles up to 600 whp
•Bead-rolled pipe ends prevent boost leaks and coupler disconnection
•Silicone couplers provide increased heat and pressure tolerance
•Available with a powder-coated finish in Sleek Silver or Stealth Black
•Mishimoto Lifetime Warranty

 

Overall Size
28.3" x 13.7" x 4.5" (w/o mounting pegs)

Core Size
19.5" x 12" x 3.5"

Weight
23lbs (10.45 Kg)

Install Difficulty
3 / 5

Construction
Bar and Plate with Cast End Tanks

Inlet / Outlet
Inlet: 2.5" O.D. / 2.375" I.D.
Outlet: 2.5" O.D. 2.375" I.D.

Pipe Construction
Polished Aluminum

Upper Pipes Silicone Couplers
Upper Coupler 1: 1.73" / 2.44", 2.125" / 2.83"
Upper Coupler 2: 2.44", 2.83"
Upper Coupler 3: 2.44", 2.83"

Lower Pipe Silicone Couplers
Lower Coupler 1: 2.44" / 2.71", 2.83" / 3.11"
Lower Coupler 2: 2.44", 2.83"
Lower Coupler 3: 2.44", 2.83"

Pipe Diameter
Inner Diameter–2.375"
Outer Diameter–2.50" Fin Specs
External: 6.35 fins per inch
Internal: 7.5 fins per inch

Tank Wall thickness
3.5mm

Engine Code
4B11T

Chassis Code
CZ4A

Purchase Includes
Mishimoto Intercooler
CNC Mounting pegs
(4) Polished Aluminum Pipes
(6) Silicone Couplers, Black
(10) 2.75" T-Bolt Clamps
(1) 2" T-Bolt Clamp
(1) 3" T-Bolt Clamp
Limited Lifetime Warranty

Fits
2008+ Lancer Evolution X GSR
2008+ Lancer Evolution X MR

Installation Torque Specs
27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps.
These clamps have an operating range of 18-35 in-lbs (2-4N*M).
Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

Note
This intercooler can be used with OEM or aftermarket intercooler pipes. The CNC mounting pegs must be installed by the customer

Related Products

Scroll To Top