{"product_id":"perrin-psp-bdy-041bk-jack-pad-set-black-2020-2026-toyota-corolla-gr-corolla-miata-subaru","title":"PERRIN PSP-BDY-041BK Jack Pad Set Black 2020-2026 Toyota Corolla GR Corolla Miata Subaru","description":"\u003cp\u003eThe PERRIN Performance \u003cstrong\u003ePSP-BDY-041BK\u003c\/strong\u003e is a 5-piece jack pad set machined from 6061 billet aluminum and finished with a durable black anodize. Designed to protect pinch welds and underbody lifting points during floor jack and scissor jack use, \u003cstrong\u003ePSP-BDY-041BK\u003c\/strong\u003e includes four jack pad adapters and one OEM scissor jack adapter for a complete lifting solution. This set fits the 2020 to 2026 Toyota Corolla, the 2023 to 2026 GR Corolla, all generations of the Mazda Miata from 1990 forward, and a broad range of Subaru models including the BRZ, WRX, STI, Impreza, Forester, Outback, Legacy, Crosstrek, and Ascent.\u003c\/p\u003e\n\n\u003ch4\u003eWhy Jack Pads Matter\u003c\/h4\u003e\n\u003cp\u003eModern unibody vehicles route structural load through narrow pinch welds along the rocker panels. These flanged seams are strong in the correct direction but are easily deformed by point contact from a bare floor jack saddle or scissor jack. Even a single lifting event on bare metal can fold a pinch weld flange, create cosmetic damage to the underbody coating, and compromise the structural geometry that automakers engineer into the rocker seam. Purpose-made jack pads distribute the load across a wider contact area and seat the saddle into a recessed channel that aligns naturally with the pinch weld profile, eliminating the lateral slip that sometimes occurs when a round jack saddle contacts a flat weld flange. OEM rubber pads that come included with scissor jack kits are a step up from bare metal contact, but they compress and deform over time, reducing load distribution consistency. CNC-machined billet aluminum pads maintain dimensional stability across repeated use without the deformation seen in rubber or plastic pads.\u003c\/p\u003e\n\n\u003ch4\u003eConstruction and Finish\u003c\/h4\u003e\n\u003cp\u003eEach adapter in the \u003cstrong\u003ePSP-BDY-041BK\u003c\/strong\u003e set is CNC-machined from 6061 billet aluminum, a widely used structural alloy selected for its combination of strength, machinability, and corrosion resistance. The machined surfaces are finished with a black anodize treatment that penetrates the aluminum oxide layer to create a hard, integrated surface rather than a coating that can peel or chip. Black anodize is resistant to road grime, brake dust, and underbody moisture, keeping the pads presentable after repeated use. The set also includes a dedicated OEM scissor jack adapter, allowing the factory jack to be used with the same pad geometry as a floor jack, which is useful for roadside tire changes where a floor jack is not available.\u003c\/p\u003e\n\n\u003ch4\u003eFitment\u003c\/h4\u003e\n\u003cp\u003eThe PSP-BDY-041BK set is compatible with the following vehicles. Always confirm the lifting point locations in the owner's manual before use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToyota Corolla:\u003c\/strong\u003e 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToyota GR Corolla:\u003c\/strong\u003e 2023, 2024, 2025, 2026\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMazda Miata:\u003c\/strong\u003e 1990 and newer, all generations (NA, NB, NC, ND)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubaru Ascent:\u003c\/strong\u003e All applicable model years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubaru BRZ:\u003c\/strong\u003e All applicable model years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubaru Crosstrek:\u003c\/strong\u003e All applicable model years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubaru Forester:\u003c\/strong\u003e All applicable model years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubaru Impreza:\u003c\/strong\u003e All applicable model years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubaru Legacy:\u003c\/strong\u003e All applicable model years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubaru Outback:\u003c\/strong\u003e All applicable model years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubaru WRX:\u003c\/strong\u003e All applicable model years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubaru STI:\u003c\/strong\u003e All applicable model years\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e4 CNC-machined 6061 billet aluminum jack pad adapters, black anodized\u003c\/li\u003e\n\u003cli\u003e1 OEM scissor jack adapter, black anodized\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFull Specifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003ePSP-BDY-041BK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePERRIN Performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e5-piece set (4 jack pad adapters, 1 OEM scissor jack adapter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eToyota Corolla 2020 to 2026; GR Corolla 2023 to 2026; Mazda Miata 1990 and newer (NA NB NC ND); Subaru Ascent, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, WRX, STI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e60 months (5 years) from date of purchase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eProp 65 Warning\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to \u003cstrong\u003ewww.P65Warnings.ca.gov\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat do jack pads do and why would I need them?\u003c\/strong\u003e\u003cbr\u003eJack pads fit between your floor jack saddle or scissor jack and the vehicle's pinch weld lifting points. Without a pad, the round or flat metal saddle contacts the narrow pinch weld flange and can deform or dent it over time. The PSP-BDY-041BK pads are shaped to cradle the pinch weld correctly, distributing load and preventing metal-to-metal damage.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan I use these with a floor jack as well as the OEM scissor jack?\u003c\/strong\u003e\u003cbr\u003eYes. The set includes four jack pad adapters sized for standard floor jack saddles and one dedicated OEM scissor jack adapter. This means you can use the correct pad geometry whether you are working in a garage with a hydraulic floor jack or swapping a tire at the side of the road with the factory scissor jack.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo these fit all generations of the Mazda Miata?\u003c\/strong\u003e\u003cbr\u003eYes. PSP-BDY-041BK is compatible with all Mazda Miata generations from 1990 onward, including the NA (1990 to 1997), NB (1999 to 2005), NC (2006 to 2015), and ND (2016 to present). The pinch weld geometry across these generations is consistent with the pad profile.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDoes this set fit the GR Corolla specifically?\u003c\/strong\u003e\u003cbr\u003eYes. The GR Corolla (2023 to 2026) is explicitly listed as a compatible fitment. The GR Corolla shares the GR-FOUR all-wheel-drive platform but retains the same pinch weld lifting point geometry as the standard Corolla, making PSP-BDY-041BK a direct fit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhich Subaru models are compatible?\u003c\/strong\u003e\u003cbr\u003eThe following Subaru models are compatible with PSP-BDY-041BK: Ascent, BRZ, Crosstrek, Forester, Impreza, Legacy, Outback, WRX, and STI. If you are unsure about your specific model year, check the PERRIN Performance fitment guide or contact their technical support team.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow durable is the black anodize finish?\u003c\/strong\u003e\u003cbr\u003eBlack anodize is an electrochemical process that converts the surface of the aluminum into a hard aluminum oxide layer integrated with the base material. Unlike paint or powder coat, it cannot peel or chip in the conventional sense. It resists oils, road salts, and brake dust well. With normal use and occasional cleaning, the finish will maintain its appearance over the 5-year warranty period and beyond.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAre 5 pads enough for all four corners of the vehicle?\u003c\/strong\u003e\u003cbr\u003eStandard practice is to lift one end of the vehicle at a time, using two jack stands at the front or rear lifting points while the other end remains on the ground. Lifting all four corners simultaneously requires four pads engaged at once. The fifth pad in the set is the OEM scissor jack adapter rather than a duplicate floor jack pad. For simultaneous four-corner lifts with a floor jack, plan to use two pads per lift cycle.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat warranty does PERRIN Performance offer on PSP-BDY-041BK?\u003c\/strong\u003e\u003cbr\u003ePERRIN Performance covers PSP-BDY-041BK with a 60-month (5-year) warranty from the date of purchase against defects in materials and workmanship under normal use conditions. Retain your purchase receipt as proof of date for any warranty claims.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWill these pads work if I have an aftermarket side skirt or rocker panel cover installed?\u003c\/strong\u003e\u003cbr\u003eThis depends on the design of the aftermarket component. If the side skirt or rocker cover blocks access to the pinch weld or adds significant height between the pad and the factory lifting point, the pad geometry may not seat correctly. Check whether the factory pinch weld notch is still accessible through or around the aftermarket part before relying on these pads.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs PSP-BDY-041BK a vehicle-specific product or a universal fit?\u003c\/strong\u003e\u003cbr\u003ePSP-BDY-041BK is designed for a specific group of vehicles listed in the compatibility section above. While many unibody vehicles use similar pinch weld geometry, PERRIN Performance has verified fitment only for the Toyota Corolla, GR Corolla, Mazda Miata, and listed Subaru models. Using these pads on vehicles outside the compatibility list is not recommended without independent verification.\u003c\/p\u003e","brand":"Perrin Performance","offers":[{"title":"Default Title","offer_id":45948185575503,"sku":"PERPSP-BDY-041BK","price":84.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/perrin-psp-bdy-041bk-black-billet-aluminum-jack-pad-set.png?v=1782236011","url":"https:\/\/www.blackopsautoworks.com\/products\/perrin-psp-bdy-041bk-jack-pad-set-black-2020-2026-toyota-corolla-gr-corolla-miata-subaru","provider":"Black Ops Auto Works","version":"1.0","type":"link"}