{"product_id":"qa1-94-95-ford-mustang-5-0l-tubular-k-member","title":"QA1 Tubular K-Member for 1994-1995 Ford Mustang 5.0L","description":"\u003ch4\u003eReduce front crossmember weight while preserving the factory wheelbase\u003c\/h4\u003e\u003cp\u003eQA1 MUK13 is a bolt-in tubular K-member for the verified 5.0L Windsor Mustang application below. Its high-strength low-alloy steel structure improves engine, header, and oil-pan access while retaining the factory wheelbase and application-specific mounting locations. A coil-over suspension is mandatory because factory-style front springs cannot be used.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eExact QA1 MUK13 5.0L Windsor configuration\u003c\/li\u003e\n\u003cli\u003eHigh-strength low-alloy American steel construction\u003c\/li\u003e\n\u003cli\u003eBlack powder-coated finish\u003c\/li\u003e\n\u003cli\u003eMore than 50 percent lighter than the factory K-member\u003c\/li\u003e\n\u003cli\u003eApproximately 25 lb assembled weight with engine mounts\u003c\/li\u003e\n\u003cli\u003eDigitally indexed mounting points based on factory K-members\u003c\/li\u003e\n\u003cli\u003eImproved header and oil-pan clearance\u003c\/li\u003e\n\u003cli\u003eGeometry supports lowered street, autocross, pro-touring, or drag-racing builds\u003c\/li\u003e\n\u003cli\u003eFactory wheelbase is retained\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eApplication Details and Restrictions\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eVerified Application and Notes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1994-1995\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003e5.0L Windsor; coil-over suspension required; factory-style springs excluded\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer Part Number\u003c\/td\u003e\n\u003ctd\u003eMUK13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eTubular front K-member\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Application\u003c\/td\u003e\n\u003ctd\u003e5.0L Windsor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh-strength low-alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack powder coat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate Weight\u003c\/td\u003e\n\u003ctd\u003e25 lb with engine mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-in; no welding specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired Suspension\u003c\/td\u003e\n\u003ctd\u003eCoil-over front suspension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFactory Coil Springs\u003c\/td\u003e\n\u003ctd\u003eNot compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Arms\u003c\/td\u003e\n\u003ctd\u003eQA1 control arms strongly recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheelbase\u003c\/td\u003e\n\u003ctd\u003eFactory wheelbase retained\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Manufacture\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003e806990145703\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eOne-year limited warranty under current QA1 terms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne QA1 MUK13 black tubular K-member\u003c\/li\u003e\n\u003cli\u003eApplication-specific bolt-in 5.0L engine-mount configuration\u003c\/li\u003e\n\u003cli\u003eCoil-over struts, control arms, caster\/camber plates, steering components, alignment, and installation labor are not included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eAbout QA1\u003c\/h4\u003e\u003cp\u003eQA1 designs and manufactures American-made suspension and chassis components for street and competition vehicles. Its Mustang K-members use high-strength low-alloy steel, application-indexed mounting points, and modular engine-mount provisions to reduce weight while preserving documented chassis geometry.\u003c\/p\u003e\u003ch4\u003eRelated Parts\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eQA1 Proma Star coil-over struts selected for the exact Mustang generation\u003c\/li\u003e\n\u003cli\u003eQA1 front control arms for the exact chassis application\u003c\/li\u003e\n\u003cli\u003eApplication-correct caster\/camber plates and steering components\u003c\/li\u003e\n\u003cli\u003eProfessional front-end alignment after installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFAQ\u003c\/h4\u003e\u003cstrong\u003eWhat is the MUK13?\u003c\/strong\u003e\u003cp\u003eIt is a black tubular QA1 front K-member for the listed 5.0L Windsor Ford Mustang application.\u003c\/p\u003e\u003cstrong\u003eCan factory-style front springs be used?\u003c\/strong\u003e\u003cp\u003eNo. QA1 states that this K-member requires coil-over suspension and will not work with factory-style springs.\u003c\/p\u003e\u003cstrong\u003eDoes installation require welding?\u003c\/strong\u003e\u003cp\u003eQA1 describes the K-member as a bolt-in component and does not specify welding for the documented installation.\u003c\/p\u003e\u003cstrong\u003eHow much does the K-member weigh?\u003c\/strong\u003e\u003cp\u003eQA1 lists an assembled weight of approximately 25 lb with engine mounts, more than 50 percent lighter than the factory unit.\u003c\/p\u003e\u003cstrong\u003eDoes it change the Mustang wheelbase?\u003c\/strong\u003e\u003cp\u003eNo. The design retains the factory wheelbase when installed with the correct application components.\u003c\/p\u003e\u003cstrong\u003eAre QA1 control arms required?\u003c\/strong\u003e\u003cp\u003eQA1 strongly recommends its control arms for best results, although the exact supporting parts must be selected for the vehicle and intended use.\u003c\/p\u003e\u003cstrong\u003eIs an alignment required afterward?\u003c\/strong\u003e\u003cp\u003eYes. QA1 instructs owners not to drive the vehicle until a qualified shop has completed a front-end alignment after suspension geometry changes.\u003c\/p\u003e\u003cstrong\u003eCan the installation be completed without supporting the engine?\u003c\/strong\u003e\u003cp\u003eNo. The engine and vehicle must be supported with appropriate equipment while the factory K-member is removed, following the QA1 instructions and a chassis service manual.\u003c\/p\u003e\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\u003col\u003e\n\u003cli\u003eConfirm the package identifies QA1 MUK13, and verify the Mustang year, 5.0L Windsor engine, coil-over suspension, and supporting components match the documented application.\u003c\/li\u003e\n\u003cli\u003eMeasure and record the vehicle's ride height and wheel position, then secure the vehicle at the correct factory lifting points.\u003c\/li\u003e\n\u003cli\u003eSupport the engine with an approved hoist and support fixture before loosening any engine-mount or K-member hardware.\u003c\/li\u003e\n\u003cli\u003eFollowing the QA1 instructions and a chassis service manual, remove the front wheels and disconnect the steering, suspension, sway-bar, brake-line support, and engine-mount connections required to release the factory K-member.\u003c\/li\u003e\n\u003cli\u003eTransfer or install the application-correct steering rack, engine mounts, control arms, and coil-over components on the QA1 K-member in the documented positions.\u003c\/li\u003e\n\u003cli\u003eRaise the assembly squarely into the chassis, start all mounting hardware by hand, and verify centering, header, oil-pan, steering, and brake-line clearance before final tightening.\u003c\/li\u003e\n\u003cli\u003eTighten every fastener to the current QA1 and Ford specifications, then verify unrestricted steering and suspension travel without hose, wiring, exhaust, or chassis contact.\u003c\/li\u003e\n\u003cli\u003eHave a qualified alignment shop perform a complete front-end alignment before the vehicle is driven, then recheck fasteners after the initial inspection interval.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e Cancer and reproductive harm. See www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":68135602028623,"sku":"QAPMUK13","price":611.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/qa1-muk13-01.webp?v=1794870669","url":"https:\/\/www.blackopsautoworks.com\/products\/qa1-94-95-ford-mustang-5-0l-tubular-k-member","provider":"Black Ops Auto Works","version":"1.0","type":"link"}