{"product_id":"radium-engineering-fcst-x-complete-refueling-kit-remote-mount-1-5in-dry-break-prv","title":"Radium Engineering FCST-X Complete Refueling Kit - Remote Mount 1.5in Dry Break - PRV","description":"\u003ch4\u003eQuick Fill Racing Without the Wasted Seconds at Pit Wall\u003c\/h4\u003e\n\u003cp\u003eEvery second spent fumbling with a standard screw cap filler during a pit stop or track day fuel-up is a second off the clock. The Radium Engineering FCST-X Complete Refueling Kit solves that with a remote mounted 1.5 inch dry break filler paired with a high flow vent system, letting the fuel cell take on fuel far faster than a conventional gravity fill setup allows. Built specifically for fuel cells equipped with the Radium FCST-X surge tank, this kit relocates the fill point away from the cell itself so drivers and crew can fill from a fender or body panel location instead of reaching into the trunk or hatch area.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemote mounted 1.5 inch dry break filler for fast, spill resistant fueling\u003c\/li\u003e\n\u003cli\u003eIncludes a 5 gallon dump can sized for quick pit lane or paddock refueling\u003c\/li\u003e\n\u003cli\u003eHigh flow vent system designed to keep air moving out as fuel moves in\u003c\/li\u003e\n\u003cli\u003eCompatible exclusively with Radium Engineering FCST-X equipped fuel cells\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum and stainless steel hardware built for repeated track use\u003c\/li\u003e\n\u003cli\u003eDry break design seals the fill line during disconnection to reduce fuel spillage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eRadium Engineering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e20-1841-03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eRAD20-1841-03\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eNot assigned by manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Type\u003c\/td\u003e\n\u003ctd\u003eRemote mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiller Type\u003c\/td\u003e\n\u003ctd\u003e1.5 inch dry break\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDump Can Capacity\u003c\/td\u003e\n\u003ctd\u003e5 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eRadium Engineering FCST-X equipped fuel cells\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum housing, stainless steel hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year Limited Warranty from Radium Engineering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRemote mount 1.5 inch dry break filler\u003c\/li\u003e\n\u003cli\u003eAngled swiveling fill neck for the FCST-X\u003c\/li\u003e\n\u003cli\u003eFlexible 1.5 inch ID filler hose\u003c\/li\u003e\n\u003cli\u003eHigh flow vent valve and vent hose\u003c\/li\u003e\n\u003cli\u003e5 gallon dry break dump can\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAbout Radium Engineering\u003c\/h4\u003e\n\u003cp\u003eRadium Engineering designs and manufactures fuel system, forced induction, and chassis components for performance and motorsports applications out of Oregon. The brand is best known for its fuel cell surge tanks, catch cans, and fuel rail systems used across road racing, drifting, and time attack builds, with a focus on repeatable durability under sustained track conditions.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cstrong\u003eWhat is the 20-1841-03?\u003c\/strong\u003e\n\u003cp\u003eThe 20-1841-03 is the Radium Engineering FCST-X Complete Refueling Kit in a remote mount, 1.5 inch dry break configuration. It includes a remote fill neck, dry break filler, 5 gallon dump can, and a high flow vent system built specifically for fuel cells fitted with the Radium FCST-X surge tank.\u003c\/p\u003e\n\u003cstrong\u003eWill this kit work with any fuel cell?\u003c\/strong\u003e\n\u003cp\u003eNo. This kit is only compatible with fuel cells that have a Radium Engineering FCST-X surge tank installed. It will not mount to a standard fuel cell or a different surge tank brand without additional adapters.\u003c\/p\u003e\n\u003cstrong\u003eWhat is a dry break filler and why use one?\u003c\/strong\u003e\n\u003cp\u003eA dry break filler uses a sealed male and female connector so fuel stops flowing the instant the dump can is disconnected. This reduces spillage compared to a standard nozzle and speeds up refueling during pit stops or track sessions.\u003c\/p\u003e\n\u003cstrong\u003eCan this be direct mounted instead of remote mounted?\u003c\/strong\u003e\n\u003cp\u003eThis particular kit is the remote mount version, meaning the fill point is relocated away from the fuel cell to a body panel or fender location. Radium also offers a direct mount version for cells where the filler can sit directly on top of the tank.\u003c\/p\u003e\n\u003cstrong\u003eDoes the kit include the dump can?\u003c\/strong\u003e\n\u003cp\u003eYes. The kit includes a 5 gallon dry break dump can designed to mate with the included remote filler for quick disconnect fueling.\u003c\/p\u003e\n\u003cstrong\u003eWhat size hose does this kit use?\u003c\/strong\u003e\n\u003cp\u003eThe kit uses a 1.5 inch inside diameter flexible filler hose that connects the remote fill neck to the FCST-X mounted elbow.\u003c\/p\u003e\n\u003cstrong\u003eIs professional installation required?\u003c\/strong\u003e\n\u003cp\u003eInstallation involves fabricating a mounting location for the remote filler, routing the fuel and vent hoses, and connecting to the FCST-X fill neck. Most installers with fuel system experience can complete this without specialty tools, though a mounting hole must be cut into the body panel.\u003c\/p\u003e\n\u003cstrong\u003eDoes this kit work with older Radium FCST models?\u003c\/strong\u003e\n\u003cp\u003eNo. This kit is designed for the current FCST-X surge tank. Earlier FCST (non-X) tanks use different remote mount fill neck part numbers and are not directly interchangeable with this kit.\u003c\/p\u003e\n\u003ch4\u003eInstall Instructions\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eDetermine the desired remote fill location on the vehicle body panel and confirm clearance behind the panel for the filler housing.\u003c\/li\u003e\n\u003cli\u003eCut the required mounting hole per the dry break filler's flange dimensions.\u003c\/li\u003e\n\u003cli\u003eMount the remote dry break filler to the body panel using the included hardware and gasket.\u003c\/li\u003e\n\u003cli\u003eRoute the 1.5 inch filler hose from the remote filler to the angled fill neck elbow on the FCST-X.\u003c\/li\u003e\n\u003cli\u003eConnect the high flow vent hose from the FCST-X vent port to the remote filler's vent connection, following proper routing to prevent fuel loss.\u003c\/li\u003e\n\u003cli\u003eSecure all hose connections with the provided clamps and verify no kinks or low points that could trap fuel or restrict air flow.\u003c\/li\u003e\n\u003cli\u003eTest fit the dry break dump can to confirm proper engagement and seal before first use.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":46294439166031,"sku":"RAD20-1841-03","price":1030.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/rad-20-1841-03-fcst-x-refueling-kit-dry-break-1_efe2da0a-3c58-42ad-b1ff-86fa32a7f084.webp?v=1785372393","url":"https:\/\/www.blackopsautoworks.com\/products\/radium-engineering-fcst-x-complete-refueling-kit-remote-mount-1-5in-dry-break-prv","provider":"Black Ops Auto Works","version":"1.0","type":"link"}