{"product_id":"radium-engineering-rad20-1000-1065-10an-orb-swivel-banjo-6-5mm-barb-fitting","title":"Radium Engineering 10AN ORB Swivel Banjo to 6.5mm Barb Fitting","description":"\u003ch4\u003eRoute Your Crankcase Vent Anywhere: A 360-Degree Swivel Banjo Fitting Built for Tight Spaces and Clean Builds\u003c\/h4\u003e\n\u003cp\u003eThe Radium Engineering RAD20-1000-1065 is a 10AN ORB swivel banjo fitting that transitions from a standard 10AN O-ring boss port to a 6.5mm hose barb, all while delivering 360-degree swivel capability after installation. Machined from stainless steel and aluminum, this fitting is rated to 150 PSI and is safe for all fluids including fuel, oil, and coolant. At an installed height of just 0.797 inches, this fitting is ideal for crankcase ventilation routing, catch can circuits, or any plumbing application where tight clearances demand a compact, high-quality fitting with adjustable outlet direction.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e10AN ORB (O-ring boss) inlet provides a leak-free seal without thread sealant\u003c\/li\u003e\n  \u003cli\u003e6.5mm hose barb outlet accepts 6.5mm inside diameter hose for compact vent lines\u003c\/li\u003e\n  \u003cli\u003e360-degree swivel rotates after installation for precise hose routing in any direction\u003c\/li\u003e\n  \u003cli\u003eCompatible with all fluids including fuel, oil, coolant, and water\u003c\/li\u003e\n  \u003cli\u003e150 PSI pressure rating handles boost pressure environments\u003c\/li\u003e\n  \u003cli\u003eUltra-compact 0.797-inch installed height clears tight engine bay packaging\u003c\/li\u003e\n  \u003cli\u003eStainless steel and aluminum construction for long-term durability\u003c\/li\u003e\n  \u003cli\u003eUniversal fitment for use in any AN ORB 10AN port application\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eRAD20-1000-1065\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eRadium Engineering\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInlet Connection\u003c\/td\u003e\n\u003ctd\u003e10AN ORB (O-ring port)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutlet Connection\u003c\/td\u003e\n\u003ctd\u003e6.5mm hose barb\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel and aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Pressure\u003c\/td\u003e\n\u003ctd\u003e150 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInstalled Height\u003c\/td\u003e\n\u003ctd\u003e0.797 inch (20.2mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSwivel\u003c\/td\u003e\n\u003ctd\u003e360 degrees (post-installation)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFluid Compatibility\u003c\/td\u003e\n\u003ctd\u003eAll fluids (fuel, oil, coolant)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFitment Type\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUPC\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1x 10AN ORB Swivel Banjo Fitting with 6.5mm Hose Barb\u003c\/li\u003e\n  \u003cli\u003ePre-installed O-ring for AN ORB sealing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cstrong\u003eWhat port size does the RAD20-1000-1065 thread into?\u003c\/strong\u003e\n\u003cp\u003eThis fitting threads into a standard 10AN ORB (O-ring Boss) port. The 10AN ORB uses 7\/8-14 thread pitch and seals against a machined boss face with an O-ring, rather than relying on thread interference like NPT. Always confirm your port is a true ORB port before installing.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat hose size fits the 6.5mm barb outlet?\u003c\/strong\u003e\n\u003cp\u003eThe barb is sized for 6.5mm inside diameter hose. This is a common size for compact crankcase vent circuits, breather lines, and coolant bleed plumbing in performance builds. Confirm your hose ID before purchasing to ensure a proper seal on the barb.\u003c\/p\u003e\n\n\u003cstrong\u003eHow does the swivel function work on this banjo fitting?\u003c\/strong\u003e\n\u003cp\u003eAfter threading the fitting into the AN ORB port and torquing it to spec, the barb outlet section can be rotated a full 360 degrees to point in any direction. This eliminates the need to compromise on hose routing or add additional elbow fittings just to clear obstacles in the engine bay.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat is the installed height of this fitting?\u003c\/strong\u003e\n\u003cp\u003eThe installed height is 0.797 inches (20.2mm). This compact profile makes it well suited for applications where valve cover clearance, intake manifold positioning, or firewall proximity would cause problems with a taller fitting.\u003c\/p\u003e\n\n\u003cstrong\u003eIs this fitting safe for use with fuel and fuel vapors?\u003c\/strong\u003e\n\u003cp\u003eYes. The fitting is rated safe for all fluids, including gasoline, diesel, ethanol blends, oil, and coolant. It is compatible with crankcase ventilation circuits that carry oil vapor and fuel mist as well as systems that see positive pressure from forced induction setups.\u003c\/p\u003e\n\n\u003cstrong\u003eCan this fitting handle boost pressure?\u003c\/strong\u003e\n\u003cp\u003eYes. With a 150 PSI pressure rating, this fitting can handle the positive crankcase pressures associated with turbocharged and supercharged engines. It is suitable for catch can inlet and outlet lines on forced induction builds.\u003c\/p\u003e\n\n\u003cstrong\u003eDoes this fitting need thread sealant or Teflon tape?\u003c\/strong\u003e\n\u003cp\u003eNo. The 10AN ORB design seals via an O-ring against a machined flat face. Thread sealant or tape is not needed and should not be used, as it can interfere with the O-ring seating and cause leaks. The pre-installed O-ring handles all sealing when the fitting is torqued correctly.\u003c\/p\u003e\n\n\u003cstrong\u003eWhat is the difference between this fitting and an NPT barb fitting?\u003c\/strong\u003e\n\u003cp\u003eNPT (National Pipe Thread) fittings rely on thread engagement and sealant or tape to prevent leaks. AN ORB fittings use a precision-machined boss face and O-ring, providing a more reliable, reusable, and leak-resistant connection especially in vibration-prone, high-pressure, or fluid-immersed environments like engine bays.\u003c\/p\u003e\n\n\u003cstrong\u003eIs this fitting reusable if I need to change my hose routing?\u003c\/strong\u003e\n\u003cp\u003eYes. Because the AN ORB design seals with an O-ring rather than by deforming thread surfaces, this fitting can be removed and reinstalled multiple times as long as the O-ring is inspected and replaced if any signs of compression set or damage are present.\u003c\/p\u003e\n\n\u003ch4\u003eInstallation Instructions\u003c\/h4\u003e\n\u003col\u003e\n  \u003cli\u003eConfirm the target port is a 10AN ORB (7\/8-14 thread, machined boss face) before beginning.\u003c\/li\u003e\n  \u003cli\u003eInspect the pre-installed O-ring on the fitting. Replace it if it shows cuts, flat spots, or any deformity.\u003c\/li\u003e\n  \u003cli\u003eApply a light coat of clean engine oil or O-ring-compatible assembly lube to the O-ring.\u003c\/li\u003e\n  \u003cli\u003eThread the fitting into the port by hand until the O-ring contacts the boss face. Do not cross-thread.\u003c\/li\u003e\n  \u003cli\u003eTorque the fitting to the appropriate specification for a 10AN ORB fitting, typically 20 to 25 ft-lb. Do not overtighten.\u003c\/li\u003e\n  \u003cli\u003eRotate the swivel barb outlet to the desired hose routing direction.\u003c\/li\u003e\n  \u003cli\u003eSlide the 6.5mm inside diameter hose onto the barb and secure with an appropriate clamp.\u003c\/li\u003e\n  \u003cli\u003eStart the engine and inspect the fitting for leaks before returning to regular use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":46000636166223,"sku":"RAD20-1000-1065","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1062\/7920\/files\/Radium_RAD20-1000-1065_10AN_ORB_Swivel_Banjo_6.5mm_Barb.png?v=1782995827","url":"https:\/\/www.blackopsautoworks.com\/products\/radium-engineering-rad20-1000-1065-10an-orb-swivel-banjo-6-5mm-barb-fitting","provider":"Black Ops Auto Works","version":"1.0","type":"link"}